Pengembangan Alat Pemurni Air Laut sebagai Media Pembelajaran Fisika SMA pada Materi Pemanasan Global

2021 ◽  
Vol 4 (2) ◽  
pp. 222
Author(s):  
Ernidawati Ernidawati ◽  
Muhammad Sahal ◽  
Nayla Fauza ◽  
Dina Syaflita ◽  
Defni Satria
Keyword(s):  
Global Warming ◽  
Fresh Water ◽  
Quantitative Data ◽  
Sea Water ◽  
Empirical Test ◽  
Salt Content ◽  
Measuring Instruments ◽  
Design Development ◽  
Analysis Design ◽  
Addie Model

ABSTRACTThe purpose of this study was to develop a sea water purifier and test the validity of a sea water purifier so that it can be used as a medium for high school physics learning on global warming material. The development model carried out is the ADDIE model. The ADDIE model consists of Analysis, Design, Development, Implementation and Evaluation. The data obtained in the form of qualitative and quantitative data. Qualitative data is used to obtain the value of preliminary analysis and validation of tools used in learning. Quantitative data is used to obtain empirical test values by comparing the results of measuring tools made with standard measuring instruments. Based on the results of the empirical test, it was found that the fresh water produced by the developed seawater purifier has good quality because it meets water standards that are suitable for consumption. Based on the research conducted, it was found that the average fresh water produced was 50.33 mL from 1 liter of seawater which was dried for 6 hours per day, and the decrease in salt content of seawater after using this seawater purifier that utilized solar power was 100%. . Based on the results of expert validation which refers to the functionality of the tool, learning elements, ease of use, aesthetics and construction of the tool, the average value of the validity index is 3.78 with a very high category. So it can be concluded that the developed seawater purifier is valid and can be used as a medium for learning Physics on global warming material.Keywords: sea water purifier, learning media, global warming.ABSTRAK Tujuan penelitian ini adalah untuk mengembangkan alat pemurni air laut dan menguji validitas alat pemurni air laut agar dapat digunakan sebagai media pembelajaran Fisika SMA pada materi pemanasan global. Model pengembangan yang dilakukan adalah model ADDIE. Model ADDIE terdiri dari Analysis, Design, Development, Implementation dan Evaluation. Data yang diperoleh berupa data kualitatif dan kuantitatif. Data kualitatif digunakan untuk mendapatkan nilai analisis pendahuluan dan validasi alat yang digunakan dalam pembelajaran. Data kuantitatif digunakan untuk memperoleh nilai uji empiris dengan membandingkan hasil ukur alat yang dibuat dengan alat ukur yang sudah standard. Berdasarkan hasil uji empiris diperoleh bahwa bahwa air tawar yang dihasilkan oleh alat pemurni air laut yang dikembangkan memiliki kualitas yang baik karena memenuhi standar air yang layak dikonsumsi. Berdasarkan  penelitian yang dilakukan, diperoleh rata-rata air tawar yang dihasilkan 50,33 mL dari 1 liter air laut yang dijemur selama 6 jam per harinya, dan   penurunan kadar garam air laut  setelah menggunakan alat pemurni air laut yang memanfaatkan tenaga surya ini sebesar 100%. Berdasarkan hasil validasi pakar  yang mengacu pada keberfungsian alat, unsur pembelajaran, kemudahan penggunaan, estetika dan konstruksi alat diperoleh nilai rata-rata indeks validitas  3,78 dengan kategori sangat tinggi, sehingga dapat disimpulkan bahwa alat pemurni air laut yang dikembangkan bernilai valid dan dapat digunakan sebagai media pembelajaran Fisika pada materi pemanasan global.Kata kunci: alat pemurni air laut, media pembelajaran, pemanasan global.

scholarly journals Development of Contextual Based Electronic Global Warming Modules Using Flipbook Applications as Physics Learning Media in High Schools

2020 ◽  
Vol 4 (3) ◽  
pp. 541
Author(s):  
Neneng Susanti ◽  
Yennita Yennita ◽  
Azhar Azhar
Keyword(s):  
Global Warming ◽  
High Schools ◽  
Learning Outcomes ◽  
Design Development ◽  
Physics Learning ◽  
Percentage Score ◽  
Average Percentage ◽  
Analysis Design ◽  
Improved Learning ◽  
Addie Model

This study aims to produce physics learning media in high schools in the form of the development of contextual based electronic global warming modules using a valid, practical and effective flipbook application. This type of research is research and development using the ADDIE model (Analysis, Design, Development, Implementation and Evaluate). The field trial design used was One Group Pretest-Posttest Design. The development of contextual based electronic global warming modules using the flipbook application has passed the validation test stage with an average percentage of material experts at 88.42% with a very valid category and an average percentage of media experts at 85.63% with a very valid category. Practicality test by the teacher obtained an average percentage score of 85.56% with very practical criteria and by students obtained an average percentage score of 91.33% with a very practical category. Improved learning outcomes using e-modules and without e-modules (the results of last year's tests) are included in the increased category. It can be concluded that the use of contextual-based electronic modules using the flipbook application in learning can improve student physics learning outcomes.

scholarly journals D-learning model on Physics Instrumentation Course for Optimizing Performance Skills

2019 ◽  
Vol 9 (2) ◽  
pp. 163-180
Author(s):  
Agus Suyatna ◽  
◽  
Viyanti Viyanti ◽  
Doni Andra ◽  
Ismi Rakhmawati ◽  
...  
Keyword(s):  
Physics Education ◽  
Learning Model ◽  
Development Stage ◽  
Measuring Instruments ◽  
Design Development ◽  
Study Program ◽  
Performance Skills ◽  
Education Study ◽  
Analysis Design ◽  
Addie Model

The COVID-19 pandemic has forced the implementation of lectures at universities to be fully carried out online or distance learning (d-learning). On the course that have sub- learning achievements of performance assessment, they experience many obstacles in achieving the learning objectives of that domain. The purpose of this study was to develop an online d-learning model for the Physics Instrumentation course based on Moodle that was valid to optimize performance skills, effective, and have high practicality for students of the Physics Education Study Program. The research method used R&D. The development procedure was carried out based on the ADDIE model covering five main activity stages, which are analysis, design, development, implementation, and evaluation. In this article, is reported until development stage. Data was collected using a questionnaire distributed using google forms. Data analysis included needs analysis, design suitability test, content/material test, construct test, language, and product readability test. The results of this study concluded that online d-learning model based on Moodle for Physics Instrumentation course was valid for optimizing the performance skills of students of the Physics Education Study Program because it had learning activities of reading e-Modules, watch videos of practice procedures and how to use measuring instruments, performing measurement simulations using virtual instruments, working on the task of making simple instruments with stages of activities according to the Engineering Design Process (EDP) model, discussing procedures for using the most appropriate measuring instruments, self-reflection on the materials that have and not been mastered and follow-up plans.

Development of SETS E-Module Integrated with POE Model for Science Learning

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Insih Wilujeng ◽  
Tri Suci Yolanda Putri
Keyword(s):  
Junior High School ◽  
Science Learning ◽  
Design Development ◽  
Feasibility Assessment ◽  
Teachers And Students ◽  
Assessment Sheet ◽  
The Subject ◽  
Analysis Design ◽  
Addie Model ◽  
Readability Assessment

This research developed Science, Environment, Technology, Society (SETS) e-module integrated with predict, observe, explain (POE) model on the subject matter of Earth Layer and Its Dynamics for grade VII students. This study aimed to reveal i) the feasibility of the developed e-module for grade VII students, and ii) the practicality of the developed e-module and its dynamics. This is a developmental research adopting the ADDIE model consisting of five stages, i.e.: analysis, design, development, implementation, and evaluation. The subject of the limited test consisted of 15 students of grade VIII.G of Public Junior High School 8 Yogyakarta. The data were collected using a product feasibility assessment sheet for material and media experts, a product practicality assessment sheet for teachers, and a product readability assessment sheet for students. The results show that the developed e-module was feasible to be used according to the material and media experts and the developed e-module is practical according to teachers and students.

scholarly journals Development of Science Module Based on Disaster Mitigation Based on Disaster Mitigation Using Eruption Software

2019 ◽  
Vol 2 (1) ◽  
pp. 49-61
Author(s):  
Zainudin Zainudin ◽  
Rica Widjayanti
Keyword(s):  
Science Learning ◽  
Descriptive Analysis ◽  
Disaster Mitigation ◽  
Science Content ◽  
Design Development ◽  
Content Validation ◽  
Analysis Techniques ◽  
Qualitative Descriptive ◽  
Analysis Design ◽  
Addie Model

The purpose of this study is to produce a science module based on disaster mitigation using eruption software. This research is a research and development following the steps of developing the ADDIE model including analysis, design, development, implementation and evaluation. Data collection techniques using the validation sheet of science modules and data analysis techniques using qualitative descriptive analysis. The results of the science content validation module based on disaster mitigation using eruption software have a very valid and reliable category and can be used with minor revisions or without revisions in science learning.

scholarly journals Pengembangan media pembelajaran IPS berbasis android materi kerajaan dan peninggalan Hindu-Buddha

2021 ◽  
Vol 7 (1) ◽  
pp. 19-31
Author(s):  
Meilia Tika Ayu Ningrum ◽  
Agus Purnomo ◽  
Idris Idris
Keyword(s):  
Virtual Reality ◽  
Student Understanding ◽  
Independent Learning ◽  
Design Development ◽  
Virtual Reality Technology ◽  
Implementation Evaluation ◽  
Innovative Learning ◽  
The Media ◽  
Analysis Design ◽  
Addie Model

Android-based learning media for Social Studies (SS) might reduce boredom and accelerate student learning because it conveys attractive, creative, and innovative learning materials that support independent learning. This study aims to develop android-based learning media for SS about the Kingdom and Relics of Hindu-Buddhist. It employed Research and Development (R&D) with Analysis, Design, Development, Implementation, Evaluation (ADDIE) model. Validation by material experts and linguists stated that the learning media was feasible with 61.5% and 70%. Results show that the learning media is suitable to use by 88.2%. The product trials resulted in practical products by 100% from educational practitioners, and 80.2% from students. This finding indicates that the media is effective, as can be seen, that 26 out of 32 students scored above the minimum grade. It is suggested that SS learning media are developed through further research by utilizing virtual reality technology. This may accelerate student understanding as the use of videos and pictures, and virtual reality to images and objects help depict things clearly.

scholarly journals The Design of Sensor and Transducer Learning Media based on Augmented Reality

2021 ◽  
Vol 2111 (1) ◽  
pp. 012043
Author(s):  
D Hariyanto ◽  
Zamtinah ◽  
T Triasih ◽  
M S Wati ◽  
G K Kassymova
Keyword(s):  
Online Learning ◽  
Augmented Reality ◽  
Research And Development ◽  
Design Stage ◽  
Vocational Students ◽  
Laboratory Setting ◽  
Design Development ◽  
Development Method ◽  
Analysis Design ◽  
Addie Model

Abstract This study aimed at determining the design stage of the augmented reality-based learning media for sensors and transducers course. This study employed the Research and Development method with the ADDIE model with the stages of analysis, design, development, implementation, and evaluation. This article focuses on the design stage during the process of media development. The developed learning media can be used among vocational students by visualizing the sensor and transducer components like in the real laboratory setting. The design of the developed learning media contained application storyboards and animation storyboards for practicing the six sensors. This augmented reality learning media is designed to support online learning and students’ autonomous learning in the practical course of sensors and transducers.

scholarly journals PENGEMBANGAN FILM SERI ANIMASI 3D “CERITA MADE” SEBAGAI MEDIA PEMBELAJARAN BIPA DI UNIVERSITAS PENDIDIKAN GANESHA

2019 ◽  
Vol 8 (1) ◽  
pp. 22
Author(s):  
Made Widiatmika . ◽  
I Gede Mahendra Darmawiguna, S.Kom., M.S . ◽  
I Made Putrama, S.T., M.Tech .
Keyword(s):  
3D Animation ◽  
Design Development ◽  
Response Data ◽  
Learning Module ◽  
Teachers And Students ◽  
Analysis Design ◽  
Addie Model ◽  
The University ◽  
Good Range ◽  
Bahasa Indonesia

Penelitian ini bertujuan: (1) untuk merancang dan mengimplementasikan Film Seri Animasi 3D “Cerita Made” sebagai Media Pembelajaran BIPA di Universitas Pendidikan Ganesha. (2) Untuk mengetahui respon guru dan peserta didik BIPA terhadap Film Seri Animasi 3D “Cerita Made” sebagai Media Pembelajaran BIPA di Universitas Pendidikan Ganesha. Pengembangan Film Seri Animasi 3D “Cerita Made” sebagai Media Pembelajaran BIPA di Universitas Pendidikan Ganesha ini menggunakan model ADDIE. Model ADDIE merupakan singkatan dari Analysis, Design, Development, Implementation, dan Evaluation. Data yang dikumpulkan yaitu data respon peserta didik BIPA UNDIKSHA terhadap pengembangan Film Seri Animasi 3D “Cerita Made” sebagai Media Pembelajaran BIPA di Universitas Pendidikan Ganesha dengan menggunakan angket. Hasil penelitian ini adalah Film Animasi 3D berupa DVD yang menggunakan Bahasa Indonesia dengan subtitle dalam Bahasa Inggris. Film yang dihasilkan sudah sesuai dengan materi yang tertera pada modul pembelajaran BIPA Pemula serta silabus yang digunakan oleh BIPA UNDIKSHA. Respon peserta didik BIPA terhadap Film Seri Animasi 3D “Cerita Made” sebagai Media Pembelajaran BIPA di Universitas Pendidikan Ganesha masuk dalam rentangan sangat baik. Kata Kunci : Film Animasi, ADDIE, BIPA, Blender, Animasi 3D. The purpose of this study is: (1) to design and implement the 3D Animation Series "Cerita Made" Film as BIPA Learning Media at the Ganesha University of Education. (2) To find out the response of teachers and students of BIPA to the 3D Animation Series "Cerita Made" Film as BIPA Learning Media at the Ganesha University of Education. Development of the 3D Animation Series "Cerita Made" Film as a BIPA Learning Media at Ganesha University of Education using the ADDIE model. ADDIE model stands for Analysis, Design, Development, Implementation, and Evaluation. The data collected is the response data of BIPA UNDIKSHA students to the development of the 3D Animation Series " Cerita Made " Film as BIPA Learning Media at the Education University of Ganesha using a questionnaire. The results of this study are 3D Animation Film in the form of DVDs that use Indonesian with subtitles in English. The film produced is in accordance with the material stated in the Beginner's BIPA learning module and the syllabus used by BIPA UNDIKSHA. The response of BIPA students to the 3D Animation Series "Cerita Made" Film as BIPA Learning Media at the University of Education Ganesha categorized a very good range. keyword : Film, ADDIE, Indonesian for Foreign, Blender, 3D Animation.

scholarly journals Design of Monitoring System for Salt Concentration in Milkfish Ponds using Android

2019 ◽  
Vol 9 (2) ◽  
pp. 42-46
Author(s):  
Nuzlya Ramadhana
Keyword(s):  
Water Quality ◽  
Water Content ◽  
Monitoring System ◽  
Salt Concentration ◽  
Sea Water ◽  
Salt Content ◽  
Temperature Sensors ◽  
Fish Mortality ◽  
Measuring Instruments ◽  
Ph Sensors

In the cultivation of milkfish, water quality is very concerned about in order to minimize fish mortality when cultivated. Several important factors in the cultivation of milkfish are the level of salt content in the water, temperature and pH. Currently, farmers monitor water quality manually by coming directly to see water quality. If there are dead fish, the cultivator will replace the new water. This will have an impact on fish production which will decrease. The milkfish pond uses brackish water for pond waters. The salt content is between the sea water content and the fresh water content. The grade level may change from season to season. This change is due to biological processes that occur in these waters as well as the interaction between pond waters and the surrounding environment. The results showed that the results of the design of the salt concentration monitoring system in the milkfish ponds that have been carried out using Arduino Uno, conductivity sensors, pH sensors, temperature sensors, wifi modules, Mi-Fi and Smartphones to access android applications. The results of testing the microcontroller functionality that have been made are in accordance with the design and are running well. The system designed to transmit information in the form of salinity values, pH sensors, temperature sensors and TDS values ??with sensor accuracy that is linear with measurement results using conventional measuring instruments with the highest error values ??of 1.3%, 2.06%, 0.702% and 1.5 respectively. %.

scholarly journals The Development and Validation of a Module on Enhancing Students' Critical Thinking, Collaboration and Writing Skills

2020 ◽  
pp. 166-177
Author(s):  
Moustafa Mohamed Abdelmohsen
Keyword(s):  
Critical Thinking ◽  
Writing Skills ◽  
Design Development ◽  
Validity And Reliability ◽  
Paired Samples ◽  
Foundation Program ◽  
The Mean ◽  
Analysis Design ◽  
Addie Model ◽  
Development And Validation

This study aims to develop and test the validity of a module on enhancing students' collaboration, critical thinking (2Cs) and writing skills. To develop the module, the researcher used ADDIE model which incorporates five primary phases, namely Analysis, Design, Development, Implementation and Evaluation. The study used a tryout group which incorporated 20 participants who studied English at The General Foundation Program at a private college in Oman. The study employed a pretest-posttest quasiexperimental design. Paired Samples t-Test was used to compare the mean scores of both tests. Apropos of module validity, a total of 5 experts validated the module. The findings revealed that there is a statistically significant mean difference between the participants' scores in both the pretest and posttest. Further, it was found that the module has good validity and reliability.

scholarly journals Development of Misconception Diagnostic Test in Momentum and Impulse Using Isomorphic Problem

2017 ◽  
Vol 1 (2) ◽  
pp. 145
Author(s):  
Nadiyah El-Haq Diyanahesa ◽  
Sentot Kusairi ◽  
Eny Latifah
Keyword(s):  
Diagnostic Test ◽  
Multiple Choice ◽  
Diagnostic Instrument ◽  
Design Development ◽  
Test Analysis ◽  
Is Research ◽  
Test Instrument ◽  
Student Misconceptions ◽  
Analysis Design ◽  
Addie Model

Preconception of the students influences to construct knowledge. They entered the classroom with conception formed from daily life. If their conception are not accordance with scientific concepts it’s  called misconceptions. Misconception is believed by students and used consistently. Teachers need to find out information on a student misconceptions by providing diagnostic tests immedietly. Diagnostic instrument that measure more accurately concepts understanding is isomorphic. Problem isomorphic composed of several question in different context and representation, but solved by the same principles. The goal of this study developing a multiple-choice diagnostic test instrument isomorphic to diagnose misconception of students on momentum and impulse. This study is research and development using ADDIE model (Analysis, Design, Development or Production, Implementation or Delivery and Evaluations). Development steps consist of: (1) Analysis, (2) Design, (3) Develop, and (4) Implement. Before  Implement steps, test instrument validated by lecture and two teachers. The instrument have been revised administered to students of class XI MIA 4 MAN Tlogo Blitar and  X MIA U1 MAN 1 Tulungagung. Results of this study are 15 items multiple choice diagnostic instruments isomorphic belongs five indicators. Based on the validation by two physics teachers and lecturers, instrument accordance used as a diagnostic instrument capable to distinguish between students misconceptions and naive concept. Around 67.8% of students who have answered the description are still misconceptions. Based on the test analysis accordance with open ended question instrument test diagnostic isomorphic produce higher accuracy by taking two of the three questions the answers provided.

Sign in / Sign up

Export Citation Format

Share Document