scholarly journals PEMBUATAN BIOBRIKET DARI GAMBUT DAN AMPAS TEBU SEBAGAI SUMBER BELAJAR MATERI ILMU KIMIA DAN PERANANNYA

2017 ◽  
Vol 1 (1) ◽  
pp. 113
Author(s):  
Lisa Mariati ◽  
Yusbarina Yusbarina
Keyword(s):  
High School ◽  
Water Content ◽  
Fossil Fuels ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Mass Composition ◽  
Mass Variation ◽  
Fixed Carbon ◽  
Alternative Source

AbstractHuman needs on fossil fuels is increasing, but the source is limited.  Thus, a renewable alternative source is needed.  One of them is Biomass.  Biomass fuel can be in the form of bio-briquette. Bio-briquette utilization as fuel is based on the carbon content contained in Biomass such as peat and bagasse.  This research aimed at knowing bio-briquette quality as fuel and learning source at senior high school.  Bio-briquette prepared with variation of peat and bagasse mass composition were 40: 0, 30: 10, 20: 20, 10: 30, 0: 40 (g: g).  Bio-briquette was made by using 20 g adhesive kanji.  Bio-briquette quality tested was done by testing the water content, ash content, volatile matter, fixed carbon, calorific value, and duration of flame.  Bio-briquette the best quality is the mass variation of G 10g: 30g AT with water content of 3.93%, ash content of 6.33%, volatile matter of 46.60%, fixed carbon of 43.14%, calorific  value of 5986 cal / g , duration of flame 210 minutes and the mass variation 0g G: 40g AT with water content of 2.33%, ash content of 3.83%, volatile matter of 49.47%, calorific value of 6198 cal / g, duration of flame 250 minutes. Preparing bio-briquette of peat and bagasse as learning source on chemistry material and its implementation was on the category of good (93.33%). Keywords: Bio-briquette, Peat, Bagasse, Quality test

scholarly journals Hasil Pengujian Proksimasi Dan Gas Buang Pada Briket Campuran Limbah Serutan Kayu, Sekam Padi Dan Bulu Ayam

2021 ◽  
Vol 14 (1) ◽  
pp. 33-39
Author(s):  
Muhamad Rizky Adipratama ◽  
Reza Setiawan ◽  
Najmudin Fauji
Keyword(s):  
Moisture Content ◽  
Rice Husk ◽  
Alternative Energy ◽  
Fossil Fuels ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Biomass Energy ◽  
Fixed Carbon ◽  
Wood Shavings

Biomass energy is one that can be used as an alternative energy as a substitute for fossil fuels and can also be useful for reducing environmental pollution due to increasing waste or waste. The manufacture of briquettes from chicken feather waste, wood shavings and rice husk waste aims to help deal with the problem of waste and use it as an alternative fuel. The making of briquettes is carried out by the process of drying the ingredients, charcoal, milling, sieving, kneading, printing, drying, proximate testing and measuring emissions on the briquettes. In this study, the composition of a mixture of chicken feathers (30%, 40%, 50%), wood shavings and rice husk (35%, 30%, 25%) was treated as well as particle sizes of 30 mesh and 60 mesh. The results of this study indicate that the lowest moisture content is in sample B2 of 4.5%. The lowest levels of volatile matters were in sample A1 of 37.4%. The lowest ash content was found in sample B3 at 10.8%. The highest fixed carbon was found in sample A3 at 45.1%. The highest calorific value (Gross Calorific Value) is found in the B3 sample of 5594 Kcal / Kg. And it has the highest CO, CO2, and HC emissions produced from the briquettes, namely 0.24%, 0.8%, 46 ppm. The properties of briquettes that have met SNI standards are moisture content, calorific value (except for sample A1), and the resulting emissions. And those that have not met SNI standards are the levels of volatile matter, ash content and fixed carbon. The resulting briquette can be used because the calorific value obtained is quiet high, which is above the specified standard of ≥ 5000 Kcal/Kg.

scholarly journals Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 2249-2263
Author(s):  
María Alejandra Ramírez-Ramírez ◽  
Artemio Carrillo-Parra ◽  
Faustino Ruíz-Aquino ◽  
Luis Fernando Pintor-Ibarra ◽  
Nicolás González-Ortega ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Impact Resistance ◽  
Resistance Index ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon ◽  
Volumetric Expansion ◽  
Pinus Spp ◽  
The Impact

This research characterized briquettes made with Pinus spp. sawdust without the use of additives. For this purpose, 19 samples of sawdust from different wood industries located in five states of the Mexican Republic were used. The densification process was carried out in a vertical hydraulic piston laboratory briquette machine. The briquettes were made with 40 g of sawdust, at 50 °C, 20 kPa and pressing for 5 min. The results obtained varied as follows: moisture content (4.1% to 7.2%), density (813.9 to 1,014.4 kg/m3), volumetric expansion (7.4% to 37.3%), compressive strength (4.9 to 40.8 N/mm), impact resistance index (46.7% to 200%), ash (0.1% to 1.1%), volatile matter (82.9% to 90.7%), fixed carbon (8.9% to 16.4%), and calorific value (20.5 to 22.8 MJ/kg). The density of the briquettes was within the “acceptable” classification (800 to 1,200 kg/m3). It was observed that, the higher the density, the lower the volumetric expansion, the higher the compressive strength, and the higher the impact resistance index. According to the ash content, the briquettes could achieve international quality. Due to high volatile matter values, rapid combustion of the briquettes with little generation of toxic smoke would be expected. Fixed carbon and calorific value results were acceptable.

ANALISIS KUALITAS PEMBAKARAN BRIKET BATUBARA DENGAN METODE KARBONISASI BERDASARKAN PARAMETER KUALITAS BRIKET, UKURAN PARTIKEL DAN KOMPOSISI

2018 ◽  
Vol 4 (01) ◽  
Author(s):  
Didi Kasi Setiawan ◽  
Agus Triantoro ◽  
Annisa Annisa
Keyword(s):  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon ◽  
American Society

Briket batubara merupakan bahan bakar padat yang mempunyai kelayakan teknis dan ketersedian batubara cukup banyak di Indonesia. Permasalahan yang sering di jumpai dalam penggunaan briket batubara sebagai bahan bakar energi adalah lamanya penyalaan, aroma yang tidak sedap pada saat dibakar, dan daya rekat briket yang tidak bagus sehingga briket mudah pecah. Untuk mengatasi masalah tersebut perlu mengetahui pengaruh komposisi dan ukuran partikel briket batubara terhadap kualitas pembakaran serta kualitas briket batubara. Dalam hal ini, diperlukan analisis laboratorium yang hasilnya dapat digunakan untuk mengklasifikasikan tingkatan kualitas briket batubara.Metode analisis yang digunakan untuk kualitas briket yaitu American Society for Testing and Materials (ASTM) meliputi pengujian moisture, ash content, volatile matter, calorific value, fixed carbon dan karbonisasi untuk peningkatan kualitas, meliputi moisture, volatile matter serta calorific value. Berdasarkan hasil pengujian yang telah dilakukan dapat disimpulkan bahwa proses karbonisasi batubara dapat menurunkan kandungan kualitas batubara inherent moisture adb (17,1 % - 6,38%) dan meningkatkan nilai calorific value cal/g adb (5462 - 6261), waktu nyala api (0:23:14 – 0:47:06), waktu nyala bara (0:44:56 – 1:23:10) serta durasi pembakaran (1:08:10 – 2:10:16). Kata-kata kunci: Briket, Batubara, Karbonisasi, Kualitas Batubara.

scholarly journals PENGARUH SUHU DAN KONSENTRASI PEREKAT TERHADAP KARAKTERISTIK BRIKET BIOARANG BERBAHAN BAKU TANDAN KOSONG KELAPA SAWIT DENGAN PROSES PIROLISIS

Konversi ◽  
2015 ◽  
Vol 4 (2) ◽  
pp. 16
Author(s):  
Yuli Ristianingsih ◽  
Ayuning Ulfa ◽  
Rachmi Syafitri K.S
Keyword(s):  
Solid Waste ◽  
Palm Oil ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Crude Palm Oil ◽  
Fixed Carbon ◽  
Heating Value ◽  
Empty Fruit Bunches ◽  
Rate Of Combustion

Abstrak-Tandan Kosong Kelapa Sawit merupakan limbah padat hasil produksi Crude Palm Oil (CPO). Setiap 1(satu) ton tandan buah segar dihasilkan 23% limbah padat. Limbah padat ini dapat di konversi menjadi bahan bakar pengganti minyak yaitu briket. Briket bioarang adalah bahan bakar padat yang dapat digunakan sebagai bahan bakar alternatif pengganti bahan bakar yang berasal dari fosil seperti minyak dan gas. Penelitian ini bertujuan untuk mengetahui pengaruh suhu pirolisis terhadap yield bioarang yang dihasilkan dan mengetahui pengaruh konsentrasi perekat kanji (5% w/w, 10% w/w, 15% w/w) terhadap karakteristik briket hasil penelitian (kadar air, volatile matter, kadar abu, fixed carbon, nilai kalor dan laju pembakaran). Penelitian dilakukan dengan metode pirolisis yaitu proses pembakaran bahan baku dalam reaktor pirolisis dengan menggunakan suhu yang tinggi dan tanpa atau dengan sedikit oksigen. Pirolisis dilakukan selama 2,5 jam dengan variasi suhu yaitu 350°C, 400°C, 450°C dan 500°C. Arang yang dihasilkan dicampur dengan perekat sesuai variasi dan dicetak menjadi briket. Briket kemudian dianalisa kadar air, kadar abu, kadar karbon, kadar zat terbang, nilai kalor dan laju pembakaran. Briket dengan yield tertinggi terdapat pada suhu 350°C sebesar 51,53% dan yield terendah pada suhu 500°C sebesar 26,03%. Briket hasil penelitian ini telah memenuhi standar mutu briket sebagai bahan bakar dilihat dari nilai kalor. Komposisi optimal antara perekat kanji dan arang TKKS hasil pirolisis yaitu pada 5%:95% yang menghasilkan nilai kalor terbesar yaitu 6748,15kal/g.  Kata kunci : Briket Bioarang, Pirolisis, Tandan Kosong Kelapa Sawit                Abstract-Palm Oil Empty Fruit Bunches are solid waste from Crude Palm Oil (CPO industry). For 1 ton of fresh fruit bunches produced 23% of solid waste. This solid waste can be converted into alternative energy that called briquettes. Briquettes are solid fuel that can be used as an alternative fuel replacement for fossil fuels such as oil and gas. This study aims to determine the effect of temperature on the yield generated briquettes and the effect of stach adhesive concentration (5, 10 and 15% wt) to briquettes characteristics (moisture content, volatile matter, ash content, fixed carbon, calorific value and the rate of combustion). In this reseacrh, two kilograms of palm oil empty fruit bunches was burned using pyrolisis reactor at different temperatur (350, 400, 450 and 5000C) for 2.5 hour. Charcoal produced was mixed with an adhesive in accordance variations and molded into briquettes. Briquettes then analyzed the water content, ash content, carbon content, volatile matter content, heating value and rate of combustion. The maximum yield of briquettes which was obtained in this research is 51.53% at temperature 3500C and the lowest yield at temperature of 500 ° C by 26.03%. Briquettes results of this study have met the quality standards of fuel briquettes as seen from the heating value. Optimal adhesive composition between starch and charcoal TKKS is 5%: 95% that generates highest calorific value about 6748.15kal/ g. Keywords: Briquette Bioarang, Pyrolysis, oil palm empty bunches

scholarly journals GROWTH AND ENERGY QUALITY OF EUCALYPTUS WOOD IN DIFFERENT CROP-LIVESTOCK-FOREST SPATIAL ARRANGEMENTS

FLORESTA ◽  
2020 ◽  
Vol 50 (4) ◽  
pp. 1707
Author(s):  
Helio Tonini ◽  
Marina Moura Morales ◽  
Flavio Jesus Wruck ◽  
Ronaldo Maran Deliberali
Keyword(s):  
Genetic Material ◽  
Volume Growth ◽  
Basic Density ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
High Yield ◽  
Fixed Carbon ◽  
Cropland Area ◽  
Eucalyptus Wood

The aim of the present study was to assess the growth and energetic properties of genetic material of eucalyptus grown in several integrated crop-livestock system spatial arrangements in Barra-do-Garças City (MT). The genetic material of 76-month old Eucalyptus spp from eight spatial arrangements were assessed according to the following properties: diameter, height and volume growth, mortality rate, dry matter yield, sapwood to heartwood ratio, form factor, bark volume, basic density, superior calorific value, ash content, volatile matter, fixed carbon and trunk energy. Data analysis was performed by adjusting growth function, test for model identity and parameters equality and ANOVA tests to Scott-Knott’s mean clustering test. Eucalyptus grandis x E. urophylla clones from recorded the highest energy efficiency due to their high yield volume, which was decisive to determine estimated energy available per tree and cropland area. Growth, stem shape and basic density varied among, and within, the same genetic materials, depending on their respective spatial arrangement. However, solid biomass properties (high calorific value, ash content, fixed carbon and volatile matter) remained stable.

scholarly journals PENGARUH SUHU DAN WAKTU KARBONISASI TERHADAP NILAI KALOR DAN KARAKTERISTIK PADA PEMBUATAN BIOARANG BERBAHAN BAKU PELEPAH AREN (Arenga pinnata)

2015 ◽  
Vol 4 (2) ◽  
pp. 46-52
Author(s):  
Erwin Junary ◽  
Julham Prasetya Pane ◽  
Netti Herlina
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Alternative Source ◽  
Renewable Biomass ◽  
Volatile Matter Content ◽  
Temperature Variable

The availability of the petroleum fuels that deprived from fossil is depleted with the increase of human population. The challenge for this fuel shortage crisis can certainly be anticipated with the manufacture of fuels deprived from renewable biomass. The study of this research is to create a biocharcoal deprived from sugar palm (Arenga pinnata) with the optimum carbonization time and temperature in order to obtain a biocharcoal with the highest calorific value. Biocharcoal is a charcoal created from biomass. The study of the determination of the optimum conditions for the manufacture of biocharcoal from sugar palm (Arenga pinnata) has a temperature variable of 300, 350, 400, 450 and 500 0C and time variable of 60, 90 and 120 minutes. Sugar palm was first cut into a small pieces and dried up under the sun and then put into a furnace to carbonate it according to the predetermined variables. The product from furnace was then put inside a desicator to cool it off for 30 minutes and then analyze it with moisture content test, ash content test, volatile matter content test, carbon content test and calorific value test. The best result was obtained at the temperature of 350 0C and 120 minutes of carbonization with the calorific value of 8611,2581 cal/gr, moisture content of %, ash content of %, volatile matter content of % and carbon content of %. Based of the calorific value obtained, the result shows that sugar palm (Arenga pinnata) biocharcoal could be utilize as an renewable alternative source fuels

scholarly journals UJI MUTU BRIKET DARI PENCAMPURAN JERAMI DAN SEKAM PADI DARI LIMBAH PASCA PANEN DI LAHAN GAMBUT

2021 ◽  
Vol 9 (3) ◽  
pp. 282
Author(s):  
Fonny Rianawati ◽  
Zainal Abidin ◽  
Muhammad Naparin
Keyword(s):  
Water Content ◽  
Combustion Rate ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Rice Husks ◽  
Innovation And Technology ◽  
Density Values ◽  
Quality Value

This study aims to conduct a study of the quality value of briquettes made from mixing straw and rice husks which include a flame test and combustion rate which is expected to be used to educate people around the forest by providing innovation and technology regarding the use of post-harvest waste. The results showed that the value of the quality of briquettes made from variations in the mixing of straw and rice husks including the flame test of the combustion rate obtained results, for treatment A (100% straw) of 0.68 gr/minute, treatment B (100% husk) of 0 ,57 gr/minute, treatment C (Husk 75% + Straw 25%) was 0.40 gr/minute, treatment D (Husk 25% + Straw 75%) was 0.46 r/minute and treatment E (Husk 50% + Straw 50%) of 0.43 gr/minute. The value of the flame to boiling time for treatment A = 38.62 minutes, treatment B = 31.05, treatment C = 23.22 minutes, treatment D = 36.05 and treatment E = 27.95 minutes. Density values of all treatments, and the water content for treatment B and treatment C can meet SII. While other parameters: ash content, volatile matter, bound carbon and calorific value still cannot meet the standards, so it is recommended to carry out further research with other variations of treatment, in order to obtain briquettes with quality that can meet the standards.

scholarly journals Chemical Properties of Charcoal Briquette with Composition Types of Gerunggang (Cratoxylon Arborescens) and Tumih (Combretocarpus Rotundatus) Wood from Tropical Peatlands

2020 ◽  
Vol 10 (2) ◽  
pp. 17-22
Author(s):  
Alpian ◽  
Raynold Panjaitan ◽  
Adi Jaya ◽  
Yanciluk ◽  
Wahyu Supriyati ◽  
...  
Keyword(s):  
Alternative Energy ◽  
Chemical Properties ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
National Standard ◽  
Fixed Carbon ◽  
Biomass Waste ◽  
Pioneer Plants

Charcoal briquettes can be an alternative energy and can be produced from Gerunggang and Tumih types of wood. These two types of wood are commonly found in Kalampangan Village as pioneer plants on burned peatlands. The research objective was to determine the chemical properties of charcoal briquettes produced from biomass waste from land processing without burning with several compositions of Gerunggang wood and Tumih wood. The chemical properties of charcoal briquettes refer to the Indonesian National Standard (SNI 01-6235-2000) and Standard Permen ESDM No. 047 of 2006. The results showed that all composition treatments in the ash content test, fixed carbon content and calorific value met the standards, while the test for volatile content in all treatment compositions did not meet the Indonesian National Standard (SNI 01-6235-2000). The composition of the most potential chemical properties and following the two standards used is the composition of 100% Tumih with ash content of 7.67%, volatile matter content of 27.23%, fixed carbon of 55.00%, and heating value of 5902.18 cal/g.

scholarly journals Physiochemical Properties of Cotton Stalk Biomass from Aricultural Residues

2015 ◽  
Vol 10 (1) ◽  
pp. 343-349 ◽  
Author(s):  
Dobariya Umesh ◽  
P Sarsavadiya ◽  
Krishna Vaja ◽  
Khardiwar Mahadeo
Keyword(s):  
Calorific Value ◽  
Volatile Matter ◽  
Proximate Analysis ◽  
Agricultural Residues ◽  
Ash Content ◽  
Cotton Stalk ◽  
Fixed Carbon ◽  
Physiochemical Properties ◽  
Feed Stock ◽  
Energy Conversion Process

The study was undertaken to investigate the properties of cotton stalk fuel from the agricultural residues. The whole cotton stalk plant is converted into shredded material with the help of cotton stalk shredder. The capacity of cotton stalk shredder machine is 218 kg/h. The proximate analysis of the shredded cotton stalk in terms of bulk density 34.92 kg / m3 moisture content 13.63 %, volatile matter 74.52 %, ash content (4.95 %, fixed carbon 20.53 % and calorific value of cotton stalk biomass (3827 cal/g) respectively. were showed that agricultural residues are the most potential and their quantitative availability, Since the aim by using shredded cotton stalk as feed stock for energy conversion process of the developed gasifier.

scholarly journals THE EFFECT OF BINDER RATIO ON THE PHYSICAL AND COMBUSTION CHARACTERISTICS OF CARBONIZED RICE STALK BRIQUETTES

2020 ◽  
pp. 221-229
Author(s):  
Rapheal Ige ◽  
Elinge Ogala ◽  
Cosmos Moki ◽  
Abdulrahman Habeeb
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Hot Water ◽  
High Concentration ◽  
Fixed Carbon ◽  
Binder Ratio ◽  
Fixed Carbon Content

The selection or choice of agro-waste briquettes for domestic and industrial cottage applications depends on the fuel properties. In this study, the briquette was produced by carbonizing the rice stalk followed by crushing and sieving, the binder was prepared by dissolving the starch in hot water, then mixed with the sieved carbonized rice stalk and then the briquette was produced using the briquetting machine. Proximate analyses, viability, characteristics and combustion were determined to know the average composition of their constituents. From the results obtained it was observed that ash content, moisture content, after glow and ignition propagation decrease as the binder ratio increase while fixed carbon content, volatile matter, calorific value, density and compressive strength increase. The results of this work indicate that briquettes produced using high concentration of the binder would make good biomass fuels. However, it has a high moisture content of 25.00%, high ash content of 23.00%, moderate volatile matter of 44.80%, low fixed carbon content of 32.20%, moderate calorific value of 13.86 MJ/Kg and high density of 0.643g/cm3. The results obtained for all the parameters showed that rice stalks briquettes produced with high concentration of the binder (starch) had a better performance based on their combustion profile.

Sign in / Sign up

Export Citation Format

Share Document