scholarly journals Physiochemical Properties of Cotton Stalk Biomass from Aricultural Residues

2015 ◽  
Vol 10 (1) ◽  
pp. 343-349 ◽  
Author(s):  
Dobariya Umesh ◽  
P Sarsavadiya ◽  
Krishna Vaja ◽  
Khardiwar Mahadeo
Keyword(s):  
Calorific Value ◽  
Volatile Matter ◽  
Proximate Analysis ◽  
Agricultural Residues ◽  
Ash Content ◽  
Cotton Stalk ◽  
Fixed Carbon ◽  
Physiochemical Properties ◽  
Feed Stock ◽  
Energy Conversion Process

The study was undertaken to investigate the properties of cotton stalk fuel from the agricultural residues. The whole cotton stalk plant is converted into shredded material with the help of cotton stalk shredder. The capacity of cotton stalk shredder machine is 218 kg/h. The proximate analysis of the shredded cotton stalk in terms of bulk density 34.92 kg / m3 moisture content 13.63 %, volatile matter 74.52 %, ash content (4.95 %, fixed carbon 20.53 % and calorific value of cotton stalk biomass (3827 cal/g) respectively. were showed that agricultural residues are the most potential and their quantitative availability, Since the aim by using shredded cotton stalk as feed stock for energy conversion process of the developed gasifier.

scholarly journals Effect of Pyrolysis Temperature and Residence Time on Bio-char Obtained from Pyrolysis of Shredded Cotton Stalk

2020 ◽  
pp. 10-28
Author(s):  
J. M. Makavana ◽  
P. N. Sarsavadia ◽  
P. M. Chauhan
Keyword(s):  
Residence Time ◽  
Pyrolysis Temperature ◽  
Calorific Value ◽  
Volatile Matter ◽  
Quality Parameters ◽  
Ash Content ◽  
Cotton Stalk ◽  
Fixed Carbon ◽  
Heating Value

Bio-char is carbon-rich product generated from biomass through batch type slow pyrolysis. In this study, the effects of pyrolysis temperature and residence time on the yield and properties of bio-chars obtained from shredded cotton stalks were investigated. Safely said that the quality of bio-char of shredded cotton stalk obtained at 500°C temperature and 240 min is best out of the all experimental levels of variables of temperature and residence time. At this temperature and residence time, the quality of bio-char in terms higher heating value (8101.3cal /g or 33.89 MJ/kg), nitrogen (1.56%), Carbon (79.30%), and C/N ratio (50.83) respectively. The quality of bio-char for various applications is discussed along with different quality parameters. The bio-char could be used for the production of activated carbon, in fuel applications, and water purification processes. Average bulk density of whole cotton stalk and shredded cotton stalk was found as 29.90 kg/m3 and 147.02 kg/m3 respectively. Thus density was increased by 3.91 times. The value of pH, EC and CEC of shredded cotton stalk biomass was found as 5.59, 0.03 dS/m and 38.84 cmol/kg respectively. Minimum and maximum values pH, EC and CEC of its bio-char was found as 5.85 to9.86, 0.04 to 0.10 dS/m and 38.02 to 24.39 cmol/kg at 200°C and 60 min and; 500°C and 240 min temperature and residence time respectively. Moisture content, ash content, volatile matter and fixed carbon of shredded cotton stalk biomass were found as, 12.5, 5.27, 80.22, and 14.51 (%, d.b) respectively. The minimum and maximum value of bio-char in terms of ash content, volatile matter and fixed carbon of bio-char were found as 5.5 to 15.56, 48.02 to 79.48 and 15.02 to 36.40 (%, d.b) respectively. Calorific value of cotton stalk biomass was found as 3685.3 cal /g. The minimum and maximum higher heating value of its bio-char was found as 4622.0 cal/ g and 8101.3 cal/g at 200°C and 60 min and; 500˚C and 240 min temperature and residence time.

scholarly journals Analysis mixed characterization of Kalimantan coal and mangrove wood charcoal character as briquette raw material

2021 ◽  
Vol 921 (1) ◽  
pp. 012055
Author(s):  
R Rahman ◽  
B Azikin ◽  
D Tahir ◽  
S Widodo
Keyword(s):  
Moisture Content ◽  
Sulfur Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Proximate Analysis ◽  
Ash Content ◽  
Wood Charcoal ◽  
Fixed Carbon ◽  
Ultimate Analysis ◽  
Mangrove Wood

Abstract This study using three types of coal from East Kalimantan and South Sulawesi Mangrove Wood Charcoal which consisted of various compositions. In sample analysis using analysis, namely: proximate, ultimate, and calorific value. Proximate analysis: ash content, volatile matter, moisture content, fixed carbon; ultimate analysis: carbon and sulfur content and the calorific value using the bomb calorimeter method. The results of the proximate analysis showed that the fixed carbon content was obtained in the mixture of MWC 75% + KJA 25% = 52.45%, while the lowest was obtained at IC 100% = 32.86%; The highest volatile matter was obtained at KJA 100% = 44.23%, the lowest was at MWC 75% + KJA 25% = 31.90%, the highest ash content was IC 100% = 9.14% the lowest was at MWC 75% + KJA 25% = 5.94% and the highest moisture content was seen at IC 100% = 15.17% but MWC 75% + IC 25% = 9.52%. The results of the ultimate analysis showed that the lowest sulfur content was in the mixed variation of MWC 75% + KJA 25% = 0.168%, while the highest sulfur content was obtained at IC 100% = 0.874%. However, it was still in the low sulfur category <1. The highest calorific value is obtained by varying the composition at MWC 75% + IC 25% = 5919 cal/gram, while the lowest was obtained at KJA 100% = 4913 cal/gram. So based on this research, the addition of mangrove charcoal is very good for increasing the calorific value.

scholarly journals Quality Improvement on Briquettes Made of Oil Palm Empty Fruit Bunches (EFB) Using of Brown Algae Adhesive

2020 ◽  
Vol 15 (1) ◽  
pp. 38-44
Author(s):  
Ana Dewita ◽  
M. Faisal ◽  
Asri Gani
Keyword(s):  
Oil Palm ◽  
Brown Algae ◽  
Thermal Characteristics ◽  
Calorific Value ◽  
Volatile Matter ◽  
Proximate Analysis ◽  
Ash Content ◽  
Fixed Carbon ◽  
Empty Fruit Bunches

The charcoal produced from oil palm empty fruit bunches pyrolysis can be utilized as environmentally friendly alternative fuel briquettes. This research aimed at improving the quality of these EFB briquettes using brown algae adhesive (alginate). The adhesive was added at 2.5%, 5%, 7.5%, and 10%. Proximate analysis was then performed on EFB and the brown algae. The best quality briquettes were obtained by adding brown algae adhesive at 2.5% concentrate, which resulted in a calorific value of 21,405 J/g. Other characteristics such as moisture content, ash content, volatile matter, and fixed carbon were found to be 7.4%, 4.9%, 79%, and 8.7%, respectively. In addition, the thermal characteristics such as density, flash point, and burning time were found at 0.96 g/cm3, 5.1 second, and 300 minutes, respectively.

scholarly journals Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 2249-2263
Author(s):  
María Alejandra Ramírez-Ramírez ◽  
Artemio Carrillo-Parra ◽  
Faustino Ruíz-Aquino ◽  
Luis Fernando Pintor-Ibarra ◽  
Nicolás González-Ortega ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Impact Resistance ◽  
Resistance Index ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon ◽  
Volumetric Expansion ◽  
Pinus Spp ◽  
The Impact

This research characterized briquettes made with Pinus spp. sawdust without the use of additives. For this purpose, 19 samples of sawdust from different wood industries located in five states of the Mexican Republic were used. The densification process was carried out in a vertical hydraulic piston laboratory briquette machine. The briquettes were made with 40 g of sawdust, at 50 °C, 20 kPa and pressing for 5 min. The results obtained varied as follows: moisture content (4.1% to 7.2%), density (813.9 to 1,014.4 kg/m3), volumetric expansion (7.4% to 37.3%), compressive strength (4.9 to 40.8 N/mm), impact resistance index (46.7% to 200%), ash (0.1% to 1.1%), volatile matter (82.9% to 90.7%), fixed carbon (8.9% to 16.4%), and calorific value (20.5 to 22.8 MJ/kg). The density of the briquettes was within the “acceptable” classification (800 to 1,200 kg/m3). It was observed that, the higher the density, the lower the volumetric expansion, the higher the compressive strength, and the higher the impact resistance index. According to the ash content, the briquettes could achieve international quality. Due to high volatile matter values, rapid combustion of the briquettes with little generation of toxic smoke would be expected. Fixed carbon and calorific value results were acceptable.

ANALISIS KUALITAS PEMBAKARAN BRIKET BATUBARA DENGAN METODE KARBONISASI BERDASARKAN PARAMETER KUALITAS BRIKET, UKURAN PARTIKEL DAN KOMPOSISI

2018 ◽  
Vol 4 (01) ◽  
Author(s):  
Didi Kasi Setiawan ◽  
Agus Triantoro ◽  
Annisa Annisa
Keyword(s):  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon ◽  
American Society

Briket batubara merupakan bahan bakar padat yang mempunyai kelayakan teknis dan ketersedian batubara cukup banyak di Indonesia. Permasalahan yang sering di jumpai dalam penggunaan briket batubara sebagai bahan bakar energi adalah lamanya penyalaan, aroma yang tidak sedap pada saat dibakar, dan daya rekat briket yang tidak bagus sehingga briket mudah pecah. Untuk mengatasi masalah tersebut perlu mengetahui pengaruh komposisi dan ukuran partikel briket batubara terhadap kualitas pembakaran serta kualitas briket batubara. Dalam hal ini, diperlukan analisis laboratorium yang hasilnya dapat digunakan untuk mengklasifikasikan tingkatan kualitas briket batubara.Metode analisis yang digunakan untuk kualitas briket yaitu American Society for Testing and Materials (ASTM) meliputi pengujian moisture, ash content, volatile matter, calorific value, fixed carbon dan karbonisasi untuk peningkatan kualitas, meliputi moisture, volatile matter serta calorific value. Berdasarkan hasil pengujian yang telah dilakukan dapat disimpulkan bahwa proses karbonisasi batubara dapat menurunkan kandungan kualitas batubara inherent moisture adb (17,1 % - 6,38%) dan meningkatkan nilai calorific value cal/g adb (5462 - 6261), waktu nyala api (0:23:14 – 0:47:06), waktu nyala bara (0:44:56 – 1:23:10) serta durasi pembakaran (1:08:10 – 2:10:16). Kata-kata kunci: Briket, Batubara, Karbonisasi, Kualitas Batubara.

scholarly journals PENGARUH SUHU DAN KONSENTRASI PEREKAT TERHADAP KARAKTERISTIK BRIKET BIOARANG BERBAHAN BAKU TANDAN KOSONG KELAPA SAWIT DENGAN PROSES PIROLISIS

Konversi ◽  
2015 ◽  
Vol 4 (2) ◽  
pp. 16
Author(s):  
Yuli Ristianingsih ◽  
Ayuning Ulfa ◽  
Rachmi Syafitri K.S
Keyword(s):  
Solid Waste ◽  
Palm Oil ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Crude Palm Oil ◽  
Fixed Carbon ◽  
Heating Value ◽  
Empty Fruit Bunches ◽  
Rate Of Combustion

Abstrak-Tandan Kosong Kelapa Sawit merupakan limbah padat hasil produksi Crude Palm Oil (CPO). Setiap 1(satu) ton tandan buah segar dihasilkan 23% limbah padat. Limbah padat ini dapat di konversi menjadi bahan bakar pengganti minyak yaitu briket. Briket bioarang adalah bahan bakar padat yang dapat digunakan sebagai bahan bakar alternatif pengganti bahan bakar yang berasal dari fosil seperti minyak dan gas. Penelitian ini bertujuan untuk mengetahui pengaruh suhu pirolisis terhadap yield bioarang yang dihasilkan dan mengetahui pengaruh konsentrasi perekat kanji (5% w/w, 10% w/w, 15% w/w) terhadap karakteristik briket hasil penelitian (kadar air, volatile matter, kadar abu, fixed carbon, nilai kalor dan laju pembakaran). Penelitian dilakukan dengan metode pirolisis yaitu proses pembakaran bahan baku dalam reaktor pirolisis dengan menggunakan suhu yang tinggi dan tanpa atau dengan sedikit oksigen. Pirolisis dilakukan selama 2,5 jam dengan variasi suhu yaitu 350°C, 400°C, 450°C dan 500°C. Arang yang dihasilkan dicampur dengan perekat sesuai variasi dan dicetak menjadi briket. Briket kemudian dianalisa kadar air, kadar abu, kadar karbon, kadar zat terbang, nilai kalor dan laju pembakaran. Briket dengan yield tertinggi terdapat pada suhu 350°C sebesar 51,53% dan yield terendah pada suhu 500°C sebesar 26,03%. Briket hasil penelitian ini telah memenuhi standar mutu briket sebagai bahan bakar dilihat dari nilai kalor. Komposisi optimal antara perekat kanji dan arang TKKS hasil pirolisis yaitu pada 5%:95% yang menghasilkan nilai kalor terbesar yaitu 6748,15kal/g.  Kata kunci : Briket Bioarang, Pirolisis, Tandan Kosong Kelapa Sawit                Abstract-Palm Oil Empty Fruit Bunches are solid waste from Crude Palm Oil (CPO industry). For 1 ton of fresh fruit bunches produced 23% of solid waste. This solid waste can be converted into alternative energy that called briquettes. Briquettes are solid fuel that can be used as an alternative fuel replacement for fossil fuels such as oil and gas. This study aims to determine the effect of temperature on the yield generated briquettes and the effect of stach adhesive concentration (5, 10 and 15% wt) to briquettes characteristics (moisture content, volatile matter, ash content, fixed carbon, calorific value and the rate of combustion). In this reseacrh, two kilograms of palm oil empty fruit bunches was burned using pyrolisis reactor at different temperatur (350, 400, 450 and 5000C) for 2.5 hour. Charcoal produced was mixed with an adhesive in accordance variations and molded into briquettes. Briquettes then analyzed the water content, ash content, carbon content, volatile matter content, heating value and rate of combustion. The maximum yield of briquettes which was obtained in this research is 51.53% at temperature 3500C and the lowest yield at temperature of 500 ° C by 26.03%. Briquettes results of this study have met the quality standards of fuel briquettes as seen from the heating value. Optimal adhesive composition between starch and charcoal TKKS is 5%: 95% that generates highest calorific value about 6748.15kal/ g. Keywords: Briquette Bioarang, Pyrolysis, oil palm empty bunches

scholarly journals GROWTH AND ENERGY QUALITY OF EUCALYPTUS WOOD IN DIFFERENT CROP-LIVESTOCK-FOREST SPATIAL ARRANGEMENTS

FLORESTA ◽  
2020 ◽  
Vol 50 (4) ◽  
pp. 1707
Author(s):  
Helio Tonini ◽  
Marina Moura Morales ◽  
Flavio Jesus Wruck ◽  
Ronaldo Maran Deliberali
Keyword(s):  
Genetic Material ◽  
Volume Growth ◽  
Basic Density ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
High Yield ◽  
Fixed Carbon ◽  
Cropland Area ◽  
Eucalyptus Wood

The aim of the present study was to assess the growth and energetic properties of genetic material of eucalyptus grown in several integrated crop-livestock system spatial arrangements in Barra-do-Garças City (MT). The genetic material of 76-month old Eucalyptus spp from eight spatial arrangements were assessed according to the following properties: diameter, height and volume growth, mortality rate, dry matter yield, sapwood to heartwood ratio, form factor, bark volume, basic density, superior calorific value, ash content, volatile matter, fixed carbon and trunk energy. Data analysis was performed by adjusting growth function, test for model identity and parameters equality and ANOVA tests to Scott-Knott’s mean clustering test. Eucalyptus grandis x E. urophylla clones from recorded the highest energy efficiency due to their high yield volume, which was decisive to determine estimated energy available per tree and cropland area. Growth, stem shape and basic density varied among, and within, the same genetic materials, depending on their respective spatial arrangement. However, solid biomass properties (high calorific value, ash content, fixed carbon and volatile matter) remained stable.

scholarly journals PEMBUATAN BIOBRIKET DARI GAMBUT DAN AMPAS TEBU SEBAGAI SUMBER BELAJAR MATERI ILMU KIMIA DAN PERANANNYA

2017 ◽  
Vol 1 (1) ◽  
pp. 113
Author(s):  
Lisa Mariati ◽  
Yusbarina Yusbarina
Keyword(s):  
High School ◽  
Water Content ◽  
Fossil Fuels ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Mass Composition ◽  
Mass Variation ◽  
Fixed Carbon ◽  
Alternative Source

AbstractHuman needs on fossil fuels is increasing, but the source is limited.  Thus, a renewable alternative source is needed.  One of them is Biomass.  Biomass fuel can be in the form of bio-briquette. Bio-briquette utilization as fuel is based on the carbon content contained in Biomass such as peat and bagasse.  This research aimed at knowing bio-briquette quality as fuel and learning source at senior high school.  Bio-briquette prepared with variation of peat and bagasse mass composition were 40: 0, 30: 10, 20: 20, 10: 30, 0: 40 (g: g).  Bio-briquette was made by using 20 g adhesive kanji.  Bio-briquette quality tested was done by testing the water content, ash content, volatile matter, fixed carbon, calorific value, and duration of flame.  Bio-briquette the best quality is the mass variation of G 10g: 30g AT with water content of 3.93%, ash content of 6.33%, volatile matter of 46.60%, fixed carbon of 43.14%, calorific  value of 5986 cal / g , duration of flame 210 minutes and the mass variation 0g G: 40g AT with water content of 2.33%, ash content of 3.83%, volatile matter of 49.47%, calorific value of 6198 cal / g, duration of flame 250 minutes. Preparing bio-briquette of peat and bagasse as learning source on chemistry material and its implementation was on the category of good (93.33%). Keywords: Bio-briquette, Peat, Bagasse, Quality test

scholarly journals Chemical Properties of Charcoal Briquette with Composition Types of Gerunggang (Cratoxylon Arborescens) and Tumih (Combretocarpus Rotundatus) Wood from Tropical Peatlands

2020 ◽  
Vol 10 (2) ◽  
pp. 17-22
Author(s):  
Alpian ◽  
Raynold Panjaitan ◽  
Adi Jaya ◽  
Yanciluk ◽  
Wahyu Supriyati ◽  
...  
Keyword(s):  
Alternative Energy ◽  
Chemical Properties ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
National Standard ◽  
Fixed Carbon ◽  
Biomass Waste ◽  
Pioneer Plants

Charcoal briquettes can be an alternative energy and can be produced from Gerunggang and Tumih types of wood. These two types of wood are commonly found in Kalampangan Village as pioneer plants on burned peatlands. The research objective was to determine the chemical properties of charcoal briquettes produced from biomass waste from land processing without burning with several compositions of Gerunggang wood and Tumih wood. The chemical properties of charcoal briquettes refer to the Indonesian National Standard (SNI 01-6235-2000) and Standard Permen ESDM No. 047 of 2006. The results showed that all composition treatments in the ash content test, fixed carbon content and calorific value met the standards, while the test for volatile content in all treatment compositions did not meet the Indonesian National Standard (SNI 01-6235-2000). The composition of the most potential chemical properties and following the two standards used is the composition of 100% Tumih with ash content of 7.67%, volatile matter content of 27.23%, fixed carbon of 55.00%, and heating value of 5902.18 cal/g.

scholarly journals THE EFFECT OF BINDER RATIO ON THE PHYSICAL AND COMBUSTION CHARACTERISTICS OF CARBONIZED RICE STALK BRIQUETTES

2020 ◽  
pp. 221-229
Author(s):  
Rapheal Ige ◽  
Elinge Ogala ◽  
Cosmos Moki ◽  
Abdulrahman Habeeb
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Hot Water ◽  
High Concentration ◽  
Fixed Carbon ◽  
Binder Ratio ◽  
Fixed Carbon Content

The selection or choice of agro-waste briquettes for domestic and industrial cottage applications depends on the fuel properties. In this study, the briquette was produced by carbonizing the rice stalk followed by crushing and sieving, the binder was prepared by dissolving the starch in hot water, then mixed with the sieved carbonized rice stalk and then the briquette was produced using the briquetting machine. Proximate analyses, viability, characteristics and combustion were determined to know the average composition of their constituents. From the results obtained it was observed that ash content, moisture content, after glow and ignition propagation decrease as the binder ratio increase while fixed carbon content, volatile matter, calorific value, density and compressive strength increase. The results of this work indicate that briquettes produced using high concentration of the binder would make good biomass fuels. However, it has a high moisture content of 25.00%, high ash content of 23.00%, moderate volatile matter of 44.80%, low fixed carbon content of 32.20%, moderate calorific value of 13.86 MJ/Kg and high density of 0.643g/cm3. The results obtained for all the parameters showed that rice stalks briquettes produced with high concentration of the binder (starch) had a better performance based on their combustion profile.

Sign in / Sign up

Export Citation Format

Share Document