scholarly journals Comprehensive study of objects of judicial and technical examination of documents in solving issues regarding the establishment of their making

2021 ◽  
pp. 288-292
Author(s):  
I.V. Hora ◽  
I.I. Popovych
Keyword(s):  
Research Process ◽  
Special Equipment ◽  
Integrated Research ◽  
Technical Examination ◽  
Long Time ◽  
Chronological Sequence ◽  
Comparison Of The Results ◽  
Printing Time ◽  
Selection Of ◽  
Comprehensive Study

The article is devoted to the analysis of the essence of integrated research during the judicial and technical expertise to establish the prostitution of documents. The attention is drawn to the fact that the forensic examination with the establishment of the preparation of documents is the most difficult among other species of this kind of examinations and to be complex. The authors consider the peculiarities of this type of expertise and emphasizes that such examinations have difficulty in carrying out the use of special equipment and physicochemical research methods. The paths of determining the preparation of the paperwork are emphasized: determining the specific time of manufacture of each of the details with a further comparison of the results obtained among themselves; establishing conformity between the time of signature and handwritten records; the printing time of printing and text printing time, establish a chronological sequence of details in the document. It was concluded that the decision of the expert problem with establishing the prescription of the document requires the use of so-called "destructive methods". The main complexity of the examination of the process of making the preparation of the document is that when conducting any actions with a document (cutting, selection of ink samples), the document can be fully or partially destroyed. In this regard, expert institutions that take an obligation to carry out such examinations, pay attention to the ability to damage the document and in this connection declare a relevant request for permission to carry out such actions. Such permission should be in the document on the appointment of expertise or in the letter. Attention is drawn to the fact that not the provision of information about the time of receipt of the document may lead to the impossibility of determining the prescription of the document. After a long time and complex research process, the expert is forced to give a conclusion "is not possible."

scholarly journals DEVELOPMENT OF METHODS FOR ASSESSMENT AND SELECTION OF UNMANNED AERIAL VEHICLE FOR MINE RECONNAISSANCE

ScienceRise ◽  
2020 ◽  
pp. 44-50
Author(s):  
Vadym Neroba
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Comparative Assessment ◽  
Problem Solution ◽  
Special Equipment ◽  
Long Time ◽  
Aerial Vehicle ◽  
Scientific Results ◽  
The One ◽  
Selection Of ◽  
Technological Product

Object of research: comparative assessment and selection of an unmanned aerial vehicle for mine reconnaissance sample. Investigated problem: substantiation of the methodological apparatus for comparative assessment and selection of an unmanned aerial vehicle for mine reconnaissance sample, taking into consideration the presence of both quantitative and qualitative indicators. Main scientific results: the methods of comparative assessment and selection of an unmanned aerial vehicle for mine reconnaissance sample is developed. The technique is based on an expert method, which allows a drone sample to be evaluated and selected objectively, taking into consideration the presence of both quantitative and qualitative indicators. At the same time, group interaction and discussion of experts are realized. When the judgments do not coincide, an artificial consensus is not imposed. The number of experts is not limited. The experts are not linked in any way. The need to ensure transitive consistency (10–12 %) makes it possible to record attempts by an expert (experts) to artificially overestimate the indicators of one of the drone samples (or the one being evaluated), therefore, the indicators of another sample will automatically deteriorate. The principle of impartiality and fairness is maintained. A well-trained objective coordinator is not required, and the reality is that the absence of the disrupting the problem solution possibility is due to a change in the psychological situation among the experts. Area of practical use of research results: humanitarian demining in the interests of ensuring the detection of mines for various purposes by sappers from a safe distance. At the same time, an increase within the probability of mines detecting is ensured due to special equipment installed onboard the drone. Innovative technological product: a technique has been developed that allows not only assessing the drone samples for mine reconnaissance objectively, but making an objective choice of a sample for specific requirements also. Scope of application of the innovative technological product: clearance of the terrain remaining after the end of hostilities. With the help of unmanned aerial vehicles, a significant acceleration of the demining process is possible, especially in those territories where mines are installed and being for a sufficiently long time.

The Research Project «Names of Modern Professions» in Extracurricular Work with 6-th Grade Russian Students

2020 ◽  
Vol 81 (6) ◽  
pp. 23-31
Author(s):  
M. I. Vasileva
Keyword(s):  
Theoretical Analysis ◽  
Scientific Literature ◽  
Research Process ◽  
Russian Language ◽  
Research Project ◽  
Educational Activities ◽  
Research Activities ◽  
The Russian Language ◽  
Selection Of

The aim of the study was to investigate approaches to the formation of general educational skills. A survey examining the design and research process was carried out by 6th-grade Russian students over the course of an extracurricular project entitled «Names of Modern Professions». In the paper, the selection of the «Lexicology» section for such activities carried out by school pupils is substantiated and stages of work on the project are described. The applied methodology involves theoretical analysis of scientific literature, formative experimentation, analysis of products of educational activities, observation and description. It is concluded that the design of extracurricular research activities in the Russian language contributes to the formation of general educational competencies in conducting surveys and searching for information on the basis of subject skills.

SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN KEPALA CABANG TERBAIK BANK SUMUT DENGAN MENERAPKAN METODE VIKOR

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Betrik J Hutapea ◽  
Mesran Mesran ◽  
Siti Nurhabibah
Keyword(s):  
Decision Support ◽  
Decision Support System ◽  
Support System ◽  
Development Bank ◽  
Vikor Method ◽  
The North ◽  
Long Time ◽  
North Sumatra ◽  
Regional Development Bank ◽  
Selection Of

SUMUT Bank is one of the Banks in Indonesia with the name of the company PT. Regional Development Bank of North Sumatra. The North Sumatra Bank has branches in each region in North Sumatra both in the district and in the sub-district, and each of these branches is led by a branch leader or branch head. The head of this branch is responsible for the reversal of the Bank being led. The best and most accomplished branch heads deserve more and more awards. The selection of the best branch heads is selected transparently and structured in the hope that it can be a motivation for all branch heads to be able to further improve the quality and service of the Bank they lead. Making the best branch head selection done manually will take a long time and tends to be less transparent and structured. One solution so that the implementation of the selection can be carried out easily and quickly, it requires a Decision Support System that can provide consistency of assessment. In this study the method used is the VIKOR method (Visekriterijumsko Kompromisno Rangiranje). This method makes cracking on alternatives based on criteria that have been determined with an ideal compromise solution or the best solution, so that this system can later be beneficial for the SUMUT Bank to get the title in determining the best branch head.Keywords: Decision Support System, North Sumatra Bank, Branch Head, Vikor

scholarly journals Methodology for Determining the Location of River Ports on a Modernized Waterway Based on Non-Cost Criteria: A Case Study of the Odra River Waterway

2021 ◽  
Vol 13 (6) ◽  
pp. 3571
Author(s):  
Bogusz Wiśnicki ◽  
Dorota Dybkowska-Stefek ◽  
Justyna Relisko-Rybak ◽  
Łukasz Kolanda
Keyword(s):  
Large Scale ◽  
Multicriteria Decision Making ◽  
Research Process ◽  
Optimal Selection ◽  
Investment Projects ◽  
Odra River ◽  
Research Problems ◽  
Selection Of ◽  
Construction Works

The paper responds to research problems related to the implementation of large-scale investment projects in waterways in Europe. As part of design and construction works, it is necessary to indicate river ports that play a major role within the European transport network as intermodal nodes. This entails a number of challenges, the cardinal one being the optimal selection of port locations, taking into account the new transport, economic, and geopolitical situation that will be brought about by modernized waterways. The aim of the paper was to present an original methodology for determining port locations for modernized waterways based on non-cost criteria, as an extended multicriteria decision-making method (MCDM) and employing GIS (Geographic Information System)-based tools for spatial analysis. The methodology was designed to be applicable to the varying conditions of a river’s hydroengineering structures (free-flowing river, canalized river, and canals) and adjustable to the requirements posed by intermodal supply chains. The method was applied to study the Odra River Waterway, which allowed the formulation of recommendations regarding the application of the method in the case of different river sections at every stage of the research process.

scholarly journals Internet page content analysis of north European Sea ports

2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Olli-Pekka Hilmola ◽  
Andres Tolli ◽  
Ain Kiisler
Keyword(s):  
Content Analysis ◽  
Environmental Issues ◽  
Basic Design ◽  
Time Period ◽  
Long Time ◽  
Sea Ports ◽  
Selection Of

Abstract This study analyses 98 Internet pages of sea ports located in Sweden, Finland and Estonia during years 2017–2019. Aim of the study is to find, how website basic design is completed (colours and languages), how slogans, environmental issues, statistics and hinterland transports are reported. Based on the analysis, it appears as rather common that sea ports follow conservative selection of colours in their websites, where blue and white are clearly most popular. Typically, English and Swedish are as the most common used language, followed by Finnish, Russian and Estonian. In some rare cases, websites are offered in Chinese or German. Larger sea ports do have clear “slogans”, where smaller ones are just having lengthy justification for their existence. Environmental issues are increasing concern among sea ports, and these are mostly mentioned in details within Swedish actors. Providing statistics varies among companies, and in some sea ports these are provided from very long time period, where in others from just previous years or then only from last year (or even at all). It is common for companies to report that they have sustainable hinterland access, railway available.

Suitability of Natural Geomedia for Radwaste Storage

1982 ◽  
Vol 15 ◽  
Author(s):  
W. S. Fyfe
Keyword(s):  
Rock Properties ◽  
Fracture Flow ◽  
Time Prediction ◽  
Sedimentary Sequences ◽  
Rock Types ◽  
Direct Observations ◽  
Long Time ◽  
Mining Disturbance ◽  
Selection Of

ABSTRACTSelection of the best rock types for radwaste disposal will depend on their having minimal permeability, maximal flow dispersion, minimal chance of forming new wide aperture fractures, maximal ion retention, and minimal thermal and mining disturbance. While no rock is perfect, thinly bedded complex sedimentary sequences may have good properties, either as repository rocks, or as cover to a repository.Long time prediction of such favorable properties of a rock at a given site may be best modelled from studies of in situ rock properties. Fracture flow, dispersion history, and geological stability can be derived from direct observations of rocks themselves, and can provide the parameters needed for convincing demonstration of repository security for appropriate times.

Neurotechnology as a factor of the educational process transformation

2021 ◽  
pp. 98-13
Author(s):  
Л.Д. Александрова ◽  
Р.А. Богачева ◽  
Т.А. Чекалина ◽  
М.В. Максимова ◽  
В.И. Тимонина
Keyword(s):  
Effective Means ◽  
Individual Characteristics ◽  
Educational Process ◽  
Special Equipment ◽  
Research Areas ◽  
Long Time ◽  
Mental Abilities ◽  
The Individual ◽  
And Control

Изучение возможностей мозга для повышения качества обучения находится в центре внимания педагогической науки уже много лет. Развитие цифровизации позволило использовать в исследованиях специальное оборудование, с помощью которого можно оценивать и контролировать работу мозга, развивать умственные способности, познавательные функции и т. п. Нейротехнологии стали эффективным средством, позволяющим трансформировать образовательный процесс за счет подбора специального учебного контента с учетом индивидуальных особенностей обучающихся. Вместе с тем возникает необходимость в конкретизации терминологии и определении актуальных направлений исследований в данной области. For a long time, the study of the brain capabilities for the improvement of the quality of education has been an urgent direction in pedagogical science. Due to the development of digitalization, new areas of research have emerged related to the use of special equipment that makes it possible to assess and control brainwork, develop mental abilities, cognitive functions, etc. One of them is neurotechnology, which is an effective means of transforming the educational process: it offers educational content based on the individual characteristics of students. Thus, a need to concretize the terminology and determine the current research areas arises. The article aims to attempt to fill this gap with the help of a representative analysis of publications on neurotechnologies, as well as the essence of neuroeducation.

Who determines the final version? The roles of translators, language revisers and editors in the publishing of a literary translation

2021 ◽  
Vol 22 (1) ◽  
pp. 14-44
Author(s):  
Marija Zlatnar Moe ◽  
Tamara Mikolič Južnič ◽  
Tanja Žigon
Keyword(s):  
Decision Making ◽  
Conflict Resolution ◽  
Literary Translation ◽  
Central Position ◽  
Decision Making Process ◽  
Translation Process ◽  
Revision Process ◽  
Final Version ◽  
Comparison Of The Results ◽  
Selection Of

AbstractThe article explores the interaction among three key figures in the process of publication of a literary translation into a language of low diffusion: the translator, the editor and the language reviser (the latter specific to the Slovene situation). The aim of the research is to identify who has the strongest position of power in the decision-making process of the production of a literary translation, especially when conflict arises. Information was gathered from the three groups with questionnaires, interviews and an analysis of public statements. The questions focused on the selection of the translator and language reviser, the translation process, the revision process and conflict resolution. A cross-comparison of the results indicates that despite the automatic central position of the editors, they tend to yield their decision-making power to translators, while language revisers have a more subservient, consulting role.

scholarly journals Self-Adaptive K-Means Based on a Covering Algorithm

Complexity ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Yiwen Zhang ◽  
Yuanyuan Zhou ◽  
Xing Guo ◽  
Jintao Wu ◽  
Qiang He ◽  
...  
Keyword(s):  
Large Scale ◽  
Clustering Algorithm ◽  
Real Data ◽  
Second Phase ◽  
Data Sets ◽  
Number Of Clusters ◽  
Large Scale Data ◽  
Long Time ◽  
Two Phases ◽  
Selection Of

The K-means algorithm is one of the ten classic algorithms in the area of data mining and has been studied by researchers in numerous fields for a long time. However, the value of the clustering number k in the K-means algorithm is not always easy to be determined, and the selection of the initial centers is vulnerable to outliers. This paper proposes an improved K-means clustering algorithm called the covering K-means algorithm (C-K-means). The C-K-means algorithm can not only acquire efficient and accurate clustering results but also self-adaptively provide a reasonable numbers of clusters based on the data features. It includes two phases: the initialization of the covering algorithm (CA) and the Lloyd iteration of the K-means. The first phase executes the CA. CA self-organizes and recognizes the number of clusters k based on the similarities in the data, and it requires neither the number of clusters to be prespecified nor the initial centers to be manually selected. Therefore, it has a “blind” feature, that is, k is not preselected. The second phase performs the Lloyd iteration based on the results of the first phase. The C-K-means algorithm combines the advantages of CA and K-means. Experiments are carried out on the Spark platform, and the results verify the good scalability of the C-K-means algorithm. This algorithm can effectively solve the problem of large-scale data clustering. Extensive experiments on real data sets show that the accuracy and efficiency of the C-K-means algorithm outperforms the existing algorithms under both sequential and parallel conditions.

Sign in / Sign up

Export Citation Format

Share Document