scholarly journals Lithium Biosorption by Arthrospira (Spirulina) Platensis Biomass

2020 ◽  
Vol 27 (2) ◽  
pp. 271-280
Author(s):  
Inga Zinicovscaia ◽  
Nikita Yushin ◽  
Ana Pantelica ◽  
Štefan Demčák ◽  
Andreea Mitu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Arthrospira Platensis ◽  
Maximum Adsorption Capacity ◽  
Lithium Content ◽  
Order Kinetic ◽  
Gamma Emission ◽  
Batch Systems ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

AbstractThe biosorption of lithium from batch systems by Arthrospira (Spirulina) platensis biomass was studied. Adsorption capacity of the biosorbent was investigated as a function of contact time, initial metals concentration and pH values. Lithium content in biomass was determined using Proton Induced Gamma Emission technique. The ability of spirulina biomass for lithium biosorption showed a maximum at the pH = 11. Equilibrium data fitted well with the Langmuir model with maximum adsorption capacity of 1.75 mg/g, while the kinetic data were best described using the pseudo second-order kinetic model. The IR spectrum of the Li-loaded biomass revealed that lithium ions could be primarily bind to –OH, –COOH, –NH, –NH2, and –NH3 groups present on biosorbent surface. Arthrospira platensis biomass could be applied as environmentally friendly sorbent for lithium removal from wastewater.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

scholarly journals Karekterisasi, Kinetika, dan Isoterm Adsorpsi Limbah Ampas Kelapa sebagai Adsorben Ion Cu(II)

SAINTIFIK ◽  
2020 ◽  
Vol 6 (2) ◽  
pp. 104-115
Author(s):  
Agusriyadin Agusriyadin
Keyword(s):  
Adsorption Capacity ◽  
Ph Effect ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Optimum Conditions ◽  
Langmuir Adsorption ◽  
Adsorbent Surface ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Penelitian ini bertujuan untuk menguji kemampuan AK dan AKPM dalam mengadsorpsi ion Cu (II), pengaruh parameter adsorpsi dan mekanisme adsorpsi. AK dan AKP Madsorben dibuat dari residu ampas kelapa. Adsorben dikarakterisasi dengan FTIR, SEM dan EDS. Pengaruh parameter adsorpsi seperti pH awal, dosis adsorben, waktu kontak dan konsentrasi ion Cu (II) awal diperiksa untuk menentukan kondisi optimum serapan tembaga (II). Ion Cu (II) yang teradsorpsi diukur berdasarkan pada konsentrasi Ion Cu (II) sebelum dan sesudah adsorpsi menggunakan metode AAS. Hasil karakterisasi menunjukkan bahwa struktur pori dan gugus fungsi tersedia pada permukaan adsorben. Menurut percobaan efek pH, kapasitas adsorpsi maksimum dicapai pada pH 7. Waktu kontak optimal dan konsentrasi tembaga awal (II) ditemukan masing-masing pada 120 menit dan 100 mg L-1. Data eksperimental sesuai dengan model kinetik orde dua orde dua, dan Langmuir isoterm adsorpsi yang diperoleh paling sesuai dengan data adsorpsi. Kapasitas adsorpsi maksimum adsorben ditemukan menjadi 4,73 dan 6,46 mg g-1 pada kondisi optimal. The results of characterization showed that the pore structure and the functional groups were available on adsorbent surface. According to the pH effect experiments, the maximum adsorption capacity was achieved at pH 7. Optimum contact time and initial copper(II) concentration were found at 120 min and 100 mg L-1, respectively. The experimental data were comply with the pseudo-second-order kinetic model, and Langmuir adsorption isotherm obtained best fitted the adsorption data. The maximum adsorption capacity of the adsorbents was found to be 4.73 and 6.46 mg g-1 at optimum conditions.

Preparation of Graphene Oxide Modified Rice Husk for Cr(VI) Removal

2019 ◽  
Vol 19 (11) ◽  
pp. 7035-7043 ◽  
Author(s):  
Tong Ouyang ◽  
Jidan Tang ◽  
Fang Liu ◽  
Chang-Tang Chang
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Rice Husk ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Sites ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Alkaline Conditions ◽  
Rice Husk Biochar

The objective of this paper is to study the removal of Cr(VI) in aqueous solution by using a new graphene oxide-coated rice husk biochar composite (GO-RHB). GO-RHB is a synthetic material having a porous structure with lots of oxygen-containing functional groups and a large surface area that provide effective adsorption sites. Experiments showed that GO-RHB had higher adsorption capacity under acidic than under alkaline conditions. At pH of 2, GO-RHB has the maximum adsorption capacity(48.8 mg g−1). Equilibrium data obtained by fitting with the Langmuir and Freundlich models indicate that the reaction process was monolayer adsorption. The adsorption of Cr(VI) followed the pseudo-second-order kinetic model that illustrates chemical adsorption. Intraparticlediffusion studies further revealed that film diffusion was taking place. Moreover, the results of thermodynamics showed that the adsorption process was endothermic and spontaneous in nature. The removal mechanism of Cr(VI) was also explained in detail. The prepared adsorbent is highly efficient and might be useful than many other conventional adsorbent used for the removal of Cr(VI) from wastewater.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Equilibrium and Kinetic Studies of Benzene and Toluene Adsorption onto Microwave Irradiated-Coconut Shell Activated Carbon

2014 ◽  
Vol 1043 ◽  
pp. 219-223 ◽  
Author(s):  
Noor Shawal Nasri ◽  
Jibril Mohammed ◽  
Muhammad Abbas Ahmad Zaini ◽  
Usman Dadum Hamza ◽  
Husna Mohd. Zain ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Kinetic Studies ◽  
Coconut Shell ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Volatile Organic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Coconut Shell Activated Carbon

Concern about environmental protection has increased over the years and the presence of volatile organic compounds (VOCs) in water poses a threat to the environment. In this study, coconut shell activated carbon (PHAC) was produced by potassium hydroxide activation via microwave for benzene and toluene removal. Equilibrium data were fitted to Langmuir, Freundlich and Tempkin isotherms with all the models having R2 > 0.94. The equilibrium data were best fitted by Langmuir isotherm, with maximum adsorption capacity of 212 and 238mg/g for benzene and toluene, respectively. The equilibrium parameter (RL) falls between 0 and 1 confirming the favourability of the Langmuir model. Pseudo-second-order kinetic model best fitted the kinetic data. The PHAC produced can be used to remediate water polluted by VOCs.

scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

Adsorption of methylene blue by using novel chitosan-g-itaconic acid/bentonite nanocomposite – equilibrium and kinetic study

2017 ◽  
Vol 75 (8) ◽  
pp. 1932-1943 ◽  
Author(s):  
Farzaneh Shakib ◽  
Ahmad Dadvand Koohi ◽  
Arash Kamran Pirzaman
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Itaconic Acid ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Oh Groups ◽  
Maximum Sorption ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
The Fourier Transform

In this study, novel chitosan-g-itaconic acid/bentonite (CTS-g-IA/BT) and chitosan/bentonite (CTS/BT) nanocomposites were synthesized for adsorption of methylene blue (MB) from aqueous solution. The process was pH-sensitive and maximum sorption was obtained at pH 6 (CTS-g-IA/BT) and 7 (CTS/BT) in 76 h agitation time using 0.03 g of nanocomposites for 50 mL of MB solution. The results showed that in pH less than 6, the adsorption capacity of CTS-g-IA/BT nanocomposite due to the existence of IA monomer is less than that of CTS/BT nanocomposite. The Fourier transform infrared spectroscopy (FTIR) spectrum of CTS-g-IA/BT revealed that both itaconic acid and BT present in the nanocomposite structure, and also the –OH groups of BT, –NH2 and –OH of CTS participated in nanocomposite formation. According to the FTIR results, a schematic diagram of the nanocomposite synthesis was presented. The kinetic results indicated that the adsorption of MB fitted well with the pseudo-second-order kinetic model. The equilibrium data followed Langmuir isotherm with the maximum adsorption capacity of 500 and 181.818 mg/g for CTS-g-IA/BT and CTS/BT nanocomposites, respectively. The negative values of Gibbs free energy change (ΔG0) and the positive values of ΔH0 confirmed that the adsorption process is spontaneous and endothermic. The positive values of ΔS0 suggested the randomness of adsorption at interface.

Kinetics and Equilibrium Studies on Adsorption of Dimethylformamide by Macroporous Chitosan Membranes

2011 ◽  
Vol 233-235 ◽  
pp. 1141-1145
Author(s):  
Si Fang Li ◽  
Qiang Chen ◽  
Miao Liu
Keyword(s):  
Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Freundlich Equation ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Chitosan Membranes ◽  
Adsorption Equilibrium Data ◽  
Langmuir And Freundlich Equations

The adsorption of dimethylformamide (DMF) by macroporous chitosan membranes using silica gel as porogen is studied. The morphology, porosity and DMF adsorption capacity of the macroporous chitosan membrane were measured. SEM photographs show the pores in the membrane dispersed uniformly. DMF adsorption capacity of the macroporous chitosan membranes reached 145 mg/g. Adsorption isotherm of DMF on the macroporous chitosan membranes was determined and correlated with Langmuir and Freundlich equations. The adsorption equilibrium data fitted well with Freundlich equation. The adsorption kinetics was found to follow the pseudo second-order kinetic model.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

scholarly journals Removal of Pb(II) by Pellicle-Like Biofilm-Producing Methylobacterium hispanicum EM2 Strain from Aqueous Media

Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2081 ◽  
Author(s):  
Sun-Wook Jeong ◽  
Hyo Kim ◽  
Jung Yang ◽  
Yong Choi
Keyword(s):  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Infrared Analysis ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Multilayer Adsorption ◽  
Drinking Water Contamination ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

As concerns are increasing about drinking water contamination with heavy metals, we investigated the possible use of a pellicle (floating biofilm)-like biofilm-producing microorganism as a biosorbent for the treatment of Pb(II) in aqueous solutions. The bacterial pellicle-producing Methylobacterium hispanicum EM2 strain (EM2) was newly isolated from mine tailing soil, and we investigated its use as a biosorbent for treating a Pb(II)-contaminated aqueous solution. The EM2 strain was strongly resistant to Pb(II) up to a concentration of 800 mg/L, and achieved remarkable adsorption performance (adsorption rate and maximum adsorption capacity of 96% ± 3.2% and 79.84 mg/g, respectively) under optimal conditions (pH, biomass content, contact time, and initial Pb(II) concentration of 7.1 g/L, 60 min, and 10 mg/L, respectively). The adsorption of Pb(II) was characterized by scanning electron microscopy-energy dispersive x-ray spectroscopy and Fourier-transform infrared analysis. The equilibrium data matched the Freundlich isotherm model well, indicating the occurrence of multilayer adsorption of Pb(II) onto the heterogeneous surface of the EM2 strain, which was also consistent with the pseudo-second-order kinetic model (R2 = 0.98). The high Pb(II) removal efficiency was also confirmed by conducting an adsorption experiment using Pb(II)-contaminated industrial wastewater.

Sign in / Sign up

Export Citation Format

Share Document