scholarly journals Feedback Loop Control Strategies of the Multi Dc Bus Link Voltages Using Adaptive Fuzzy Logic Control

2013 ◽  
Vol 64 (3) ◽  
pp. 143-151
Author(s):  
Farid Bouchafaa ◽  
Mohamed Seghir Boucherit ◽  
El Madjid Berkouk
Keyword(s):  
Fuzzy Logic ◽  
Fuzzy Logic Controller ◽  
Control Strategies ◽  
Harmonic Distortion ◽  
Power Converter ◽  
Voltage Source ◽  
Switching Frequency ◽  
Pwm Rectifier ◽  
Loop Control ◽  
Multilevel Inverters

Voltage source multilevel inverters have become very attractive for power industries in power electronics applications during last years. The main purposes that have led to the development of the studies about multilevel inverters are the generation of output voltage signals with low harmonic distortion; the reduction of switching frequency. A serious constraint in a multilevel inverter is the capacitor voltage-balancing problem. The unbalance of different DC voltage sources of five-level neutral point clamping (NPC) voltage source inverter (VSI) constitutes the major limitation for the use of this new power converter. In order to stabilize these DC voltages, we propose in this paper to study the cascade constituted by three phases five-level PWM rectifier, a clamping bridge and five-level NPC (VSI). In the first part, we present a topology of five-level NPC VSI, and then they propose a model of this converter and an optimal PWM strategy to control it using four bipolar carriers. Then in the second part, we study a five-level PWM rectifier, which is controlled by a multiband hysteresis strategy. In the last part of this paper, the authors study shows particularly the problem of the stability of the multi DC voltages of the inverter and its consequence on the performances of the induction motors (IM). Then, we propose a solution to the problem by employed closed loop regulation using PI regulator type fuzzy logic controller (FLC). The results obtained with this solution confirm the good performances of the proposed solution, and promise to use the inverter in high voltage and great power applications as electrical traction.

scholarly journals Fuzzy Logic Based Robust DVC Design of PWM Rectifier Connected to a PMSG WECS under wind/load Disturbance Conditions

2019 ◽  
Vol 4 (1) ◽  
pp. 37
Author(s):  
Youcef SAIDI ◽  
Abdelkader Mezouar ◽  
Yahia Miloud ◽  
Mohammed Amine Benmahdjoub ◽  
Maamar Yahiaoui
Keyword(s):  
Fuzzy Logic ◽  
Fuzzy Logic Controller ◽  
Pulse Width Modulation ◽  
Wind Load ◽  
Voltage Source ◽  
Pwm Rectifier ◽  
Wind Energy Conversion ◽  
Logic Control ◽  
Wind Turbine System ◽  
Three Phase

Permanent Magnet Generator has been widely used in Variable-Speed Wind Energy Conversion System (VSWECS). Fuzzy Logic Control (FLC) of the generator side converter has the ability to have good regulation of the DC-link voltage to meet the requirements necessary to achieve optimal system operation, regardless of the disturbances caused by the characteristics of the drive train or some changes into the DC-load. The main focus of this paper is to present a model for a three-phase voltage source space vector pulse width modulation (SVPWM) rectifier which is connected to a PMSG in a wind turbine system, where a direct voltage control (DVC) using FLC based on voltage orientation strategy is used to control the mentioned rectifier. The control algorithm employs a fuzzy logic controller to effectively achieve a smooth control of DC-link voltage under wind/load perturbation conditions. Some simulation results, using Matlab/Simulink, are presented to show the effectiveness of the SVPWM rectifier Connected to a PMSG WECS with the proposed control strategy.

scholarly journals Design and Implementation of Fuzzy Logic based Single Phase Inverter using FPGA Controller

2019 ◽  
Vol 8 (4S2) ◽  
pp. 413-417
Keyword(s):  
Fuzzy Logic ◽  
Single Phase ◽  
Fuzzy Logic Controller ◽  
Harmonic Distortion ◽  
Voltage Source ◽  
Main Theme ◽  
Phase Inverter ◽  
Control Techniques ◽  
Pulse Width Modulator ◽  
Single Phase Inverter

The single phase inverter provides continuous AC power supplies without any interrupt .The idea is to serve sinusoidal AC output whose voltage and frequency can be controlled by PWM pulse. The main theme of this concept is to present a new construction of an FPGA based control techniques for inverter. In this proposed system, a PI controller is used to the single phase PWM voltage source inverter. It minimizes periodic distraction resulted from linear load. Simulation provides the results, with reduced harmonics distortion of the output voltage .and innovative technique for including a fuzzy logic controller through a usual sampled pulse-width modulator is reported. The FLC is used to decrease the harmonic distortion and to offer better standard regulation. Simulations are carried out in ALTERA-Quartus II 8.0 software in addition by means of Matlab/Simulink and the results are presented for various control techniques. FPGA controller is preferred for the real time realization of the switching approach, for the most part owing to its larger computation speed which is able to guarantee the precision of the PWM pulse is developed. At the concluding stage the FPGA is used as a PWM generator in order to apply the appropriate signals for inverter switches

scholarly journals Stabilization of multi DC bus link voltages of multilevel NPC VSI. Application to double stator induction motors

2012 ◽  
Vol 22 (1) ◽  
pp. 107-120
Author(s):  
D. Beriber ◽  
A. Talha ◽  
M. Boucherit
Keyword(s):  
Stability Problem ◽  
Induction Motors ◽  
Power Converter ◽  
Neutral Point ◽  
Voltage Source ◽  
Switching Frequency ◽  
Voltage Source Inverter ◽  
Multilevel Inverters ◽  
Dc Bus ◽  
The Stability

Stabilization of multi DC bus link voltages of multilevel NPC VSI. Application to double stator induction motors Voltage source multilevel inverters have become very attractive for power industries in power electronics applications during last years. The main purposes of studying multilevel inverters are the generation of output voltage signals with low harmonic distortion and reduction of switching frequency. An important issue of the multilevel inverter is the capacitor voltage-balancing problem. The unbalance of different DC voltage sources of multilevel neutral point clamped (NPC) voltage source inverter (VSI) constitutes the major limitation for the use of this new power converter. In this paper, we present study on the stability problem of the input DC voltages of the three-level Neutral Point Clamping (NPC) voltage source inverter (VSI). This inverter is useful for application in high voltage and high power area. In the first part, we remind the model of double stator induction motors (DSIM). Then, we develop control models of this inverter using the connection functions of the semi-conductors. We propose a Pulse Width Modulation (PWM) strategy to control this converter. The inverter is fed by constant input DC voltages. In the last part, we study the stability problem of the input DC voltages of the inverter. A cascade constituted by two three-level PWM rectifiers - two three-level NPC VSI - DSIM is discussed. The results obtained show that the input DC voltages of the inverters are not stable. To solve this problem, we propose to use a half clamping bridge. This solution is very promising in order to stabilize the input DC voltages of this converters.

Control Strategy for PWM Voltage Source Converter Using Fuzzy Logic for Adjustable Speed DC Motor

2017 ◽  
Vol 8 (1) ◽  
pp. 51
Author(s):  
Saidah Baisa ◽  
Bambang Purwahyudi ◽  
Kuspijani Kuspijani
Keyword(s):  
Fuzzy Logic ◽  
Control Strategy ◽  
Fuzzy Logic Controller ◽  
Harmonic Distortion ◽  
Dc Motor ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Motor Speed ◽  
Dc Voltage ◽  
Input Variables

The speed of a DC motor can be controlled by varying the voltage applied to the terminal. It can be done by controlling a PWM-VSC (PWM-Voltage Source Converter). This paper analyzes an control strategy of PWM-VSC using fuzzy logic to obtain varying DC voltage and according to the DC motor speed as desired. The control strategy of PWM-VSC directly using the switch variable in dq rotating reference frame as input variables. The fuzzy logic controller proposes to get a DC voltage variation stable by adjusting amplitudo of the network current. The simulation Fuzzy Logic Controller results show that the design fuzzy logic produce a good dynamic of DC voltage and DC motor speed without overshoot. On the network, Total Harmonic Distortion less than 5 % and unity power factor.

scholarly journals Iron Loss Minimization Strategy for Predictive Torque Control of Induction Motor

Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 566 ◽  
Author(s):  
Pavel Karlovsky ◽  
Ondrej Lipcak ◽  
Jan Bauer
Keyword(s):  
Induction Motor ◽  
Output Voltage ◽  
Control Strategies ◽  
Harmonic Distortion ◽  
Synchronous Generator ◽  
Torque Control ◽  
Voltage Source ◽  
Switching Frequency ◽  
Iron Losses ◽  
Converter Topology

Today’s modern control strategies of an induction motor (IM) drive require a power source with an adjustable output voltage frequency and amplitude. The most commonly used converter topology is a two-level voltage-source inverter (VSI). However, the utilization of a VSI introduces additional voltage and current distortion, which leads to additional power losses in the machine’s magnetic circuit. Both the transistor switching frequency and the type of the inverter control determine the total harmonic distortion (THD) of the motor’s phase currents. In this paper, the influence of the inverter DC-link voltage on the iron losses of an IM controlled by a predictive torque control (PTC) is presented. It is shown that if the IM drive operates below the rated speed, it is possible to modify the PTC algorithm to reduce the additional iron losses caused by the non-harmonic inverter output voltage. The control of the DC-link voltage is achieved by using a silicon-controlled rectifier. Experiments were conducted on a 5.5 kW IM controlled by PTC, and the results are compared against a sinusoidal voltage supply created by a synchronous generator.

scholarly journals Evaluation of the High Performance Indirect Field Oriented Controlled Dual Induction Motor Drive Fed by a Single Inverter using Type-2 Fuzzy Logic Control

2020 ◽  
Vol 10 (5) ◽  
pp. 6301-6308
Author(s):  
A. Bounab ◽  
A. Chaiba ◽  
S. Belkacem
Keyword(s):  
Fuzzy Logic ◽  
Induction Motor ◽  
Fuzzy Logic Control ◽  
High Performance ◽  
Fuzzy Logic Controller ◽  
Dynamic Performance ◽  
Voltage Source ◽  
Switching Frequency ◽  
Logic Control

In this paper, a high-performance indirect field-oriented controlled dual Induction Motor (IM) drive fed by a single inverter using type-2 fuzzy logic control will be presented. At first, the mathematical model of the IM is implemented in the d-q reference frame. Then, the speed control of the Dual Induction Motor (DIM) operating in parallel configuration with Indirect Field Oriented Control (IFOC) using PI and type-2 Fuzzy Logic Controller (T2-FLC) will be presented. For the control of this system, a DC supply and a Space Vector Pulse Width Modulation (SVPWM) voltage source inverter are introduced with constant switching frequency. Also, the performance of T2-FLC, which is based on the IFOC, is tested and compared to those achieved using the PI controller. The simulation results demonstrate that the T2-FLC is more robust, efficient, and has superior dynamic performance for traction system applications.

Inter-turn fault stability enrichment and diagnostic analysis of power system network using wavelet transformation-based sample data control and fuzzy logic controller

2021 ◽  
pp. 014233122110070
Author(s):  
Arunesh Kumar Singh ◽  
Abhinav Saxena ◽  
Nathuni Roy ◽  
Umakanta Choudhury
Keyword(s):  
Fuzzy Logic ◽  
Power System ◽  
Wavelet Transformation ◽  
Fuzzy Logic Controller ◽  
Power Transformer ◽  
Harmonic Distortion ◽  
Inrush Current ◽  
Data Control ◽  
Sample Data ◽  
Z Transformation

In this paper, performance analysis of power system network is carried out by injecting the inter-turn fault at the power transformer. The injection of inter-turn fault generates the inrush current in the network. The power system network consists of transformer, current transformer, potential transformer, circuit breaker, isolator, resistance, inductance, loads, and generating source. The fault detection and termination related to inrush current has some drawbacks and limitations such as slow convergence rate, less stability and more distortion with the existing methods. These drawbacks motivate the researchers to overcome the drawbacks with new proposed methods using wavelet transformation with sample data control and fuzzy logic controller. The wavelet transformation is used to diagnose the fault type but contribute lesser for fault termination; due to that, sample data of different signals are collected at different frequencies. Further, the analysis of collected sample data is assessed by using Z-transformation and fuzzy logic controller for fault termination. The stability, total harmonic distortion and convergence rate of collected sample data among all three methods (wavelet transformation, Z-transformation and fuzzy logic controller) are compared for fault termination by using linear regression analysis. The complete performance of fault diagnosis along with fault termination has been analyzed on Simulink. It is observed that after fault injection at power transformer, fault recovers faster under fuzzy logic controller in comparison with Z-transformation followed by wavelet transformation due to higher stability, less total harmonic distortion and faster convergence.

The Design and Simulation of Three-Phase PWM Converter

2013 ◽  
Vol 321-324 ◽  
pp. 917-920
Author(s):  
Guang Ya Liu ◽  
Xiao Song Li
Keyword(s):  
High Frequency ◽  
Closed Loop ◽  
Voltage Source ◽  
Pwm Rectifier ◽  
Phase Voltage ◽  
Pwm Converter ◽  
Loop Control ◽  
Closed Loop Control System ◽  
Three Phase ◽  
Loop Control System

Three-phase voltage source PWM rectifier generally adopts double closed loop control system. According to the high frequency characteristic of three-phase voltage source PWM rectifier, this paper put forward the setting method of current inner ring regulator and voltage outer ring regulator PI parameter. Finally, it is verified by simulation.

Sign in / Sign up

Export Citation Format

Share Document