Geological and geomorphological problems caused by transportation and industry

2011 ◽  
Vol 3 (3) ◽  
Author(s):  
Lorant David ◽  
Zoltan Ilyes ◽  
Zoltan Baros

AbstractAlterations in topography due to the construction of transport infrastructure and industrial development are the results of rather complex processes. The impact of transport constructions upsetting (topographic) equilibrium is manifested in a relatively narrow strip, and, mostly, through producing abnormally steep slopes, in reducing relief stability. The earthworks for transport routes are themselves also landscape-forming factors whereas in the case of industrial developments, planation is usually mentioned. Topographic changes related to the construction of transport infrastructure and industrial development are discussed historically in this chapter. Among the direct impacts of the first are those related to the construction of Roman and Medieval roads, hollow roads in loess, public roads, motorways, railways, canals, tunnels and airports; while of the second are those of early mining and metallurgy, cellars, sludge reservoirs, slag cones and fly-ash reservoirs, cooling ponds, industrial parks, shopping centres and waste disposal sites. Of the indirect ones, an introduction is given to impacts of surface sealing, changes in runoff, the ‘waterfall effect,’ as well as to environmental impacts under permafrost conditions.

2021 ◽  
Vol 937 (2) ◽  
pp. 022033
Author(s):  
M V Kuklina ◽  
N E Krasnoshtanova ◽  
A I Trufanov ◽  
V N Bogdanov ◽  
T Sh Rуgzуnov ◽  
...  

Abstract In the complex of socio-economic and environmental problems, infrastructure provision is becoming a cornerstone. A feature of remote areas is the inconsistency in understanding the vital need for access to modern infrastructure (primarily, to transport opportunities) and the costs associated with this access. On the one hand, the transport infrastructure in the region contributes to the efficient use of the economic potential of the region. On the other hand, isolation from the outside world with restricting existing traffic flows and rejecting new transport projects may be the local population’s own choice. Industrial development is the main driving force in the development of the transport infrastructure of the territories. In this work, the following study areas were selected as model areas for the study of the mutual influence of mining enterprises and the development of transport infrastructure - Todzhinsky Kozhuun of the Republic of Tyva and Okinsky District of the Republic of Buryatia. Methods of comparative geographical and statistical analysis and data generalization, network and problem approaches, in-depth and group interviews of local residents were used. The results of the analysis of publicly available data on the development and maintenance of specific transport arteries and materials of original field studies are presented.


2020 ◽  
Vol 19 (6) ◽  
pp. 1015-1034
Author(s):  
O.Yu. Patrakeeva

Subject. The paper considers national projects in the field of transport infrastructure, i.e. Safe and High-quality Roads and Comprehensive Plan for Modernization and Expansion of Trunk Infrastructure, and the specifics of their implementation in the Rostov Oblast. Objectives. The aim is to conduct a statistical assessment of the impact of transport infrastructure on the region’s economic performance and define prospects for and risks of the implementation of national infrastructure projects in conditions of a shrinking economy. Methods. I use available statistics and apply methods and approaches with time-series data, namely stationarity and cointegration tests, vector autoregression models. Results. The level of economic development has an impact on transport infrastructure in the short run. However, the mutual influence has not been statistically confirmed. The paper revealed that investments in the sphere of transport reduce risk of accidents on the roads of the Rostov Oblast. Improving the quality of roads with high traffic flow by reducing investments in the maintenance of subsidiary roads enables to decrease accident rate on the whole. Conclusions. In conditions of economy shrinking caused by the complex epidemiological situation and measures aimed at minimizing the spread of coronavirus, it is crucial to create a solid foundation for further economic recovery. At the government level, it is decided to continue implementing national projects as significant tools for recovery growth.


2018 ◽  
Vol 34 (1) ◽  
pp. 3-9
Author(s):  
M. S. Abrashkin ◽  
A. A. Vershinin

The article analyzes the market of computer technologies. The theoretical substantiation of the scientific category «digital economy» and its economic components was given. Identified patterns of development of the domestic economy on the basis of informatization, the change of technological paradigms and the dynamics of industrial production. Based on the materials of the automotive industry, the influence of the digital economy on the internal industrial and technological structure of the industry and the results of its activities was proved. Also, the paper presents the main problems of sustainable industrial development in the context of socio-technical and economic means of developing science and technology in Russia.


Author(s):  
Kadarkarai Arunkumar ◽  
Muthiah Muthukannan ◽  
Arunachalam Suresh Kumar ◽  
Arunasankar Chithambar Ganesh ◽  
Rangaswamy Kanniga Devi

The waste disposal issues were the most severe problems that could cause global warming, which depletes the environment. The research hypothesis was to find the suitability and sustainability of utilizing the waste by-products in the invention of green geopolymer concrete to eliminate the tremendous effects caused by the wastes. Due to the increased demand for fly ash in recent years, the requirement of high alkaline activators, and elevated temperature for curing, there was a research gap to find an alternative binder. The novelty of this research was to utilize the waste wood ash, which is available plenty in nearby hotels and has an inbuilt composition of high potassium that can act as a self alkaline activator. Waste wood ash procured from the local hotels was replaced with fly ash by 0 to 100% at 10% intervals. The setting and mechanical characteristics were found on the prolonged ages to understand the influence of waste wood ash. Microstructural characterization was found using Scanning Electron Microscope and X-Ray Diffraction Analysis to define the impact of waste wood ash in the microstructure. The research findings showed that replacing 30% waste wood ash with fly ash attained better performance in setting properties and all mechanical parameters. The obtained optimum mix could provide the best alternative for fly ash in geopolymer to eliminate the economic thrust by the requirement of alkaline activators and deploy the environmental impact caused by the waste wood ash.


2021 ◽  
Vol 2021 (23) ◽  
pp. 237-250
Author(s):  
Anatolii Morozov ◽  
◽  
Tetiana Morozova ◽  
Inessa Rutkovska ◽  
◽  
...  

Introduction.The main environmental risks posed by roads are population depletion (deaths on roads) and barrier effects (habitat fragmentation). Barrier effects - animals avoid crossing roads, which leads to a decrease in the size and quality of habitat, optimal population size, reduced ability to find food and partner, increased genetic structuring and local extinction (Forman et al. 2003; Andrews et al. 2015; van der Ree et al. 2015). These risks against the background of other stressors, in particular the presence of invasive species, pollution, pesticide use, climate change, plant and animal diseases, may threaten the survival of populations.This issue is especially relevant for herpetofauna due to their biological characteristics. In particular, reptiles and amphibians move slowly, are too small (for drivers to see), do not avoid roads, and in cold periods roads attract amphibians (thermoregulation) because the coating absorbs and retains heat (Case and Fisher 2001; Jochimsen et al. 2004).The principle of ensuring ecological continuity is to identify priority efforts to mitigate environmental risks for animals and reduce the negative impact of the transport complex as a spatial barrier and source of pollution by introducing a number of technical means (eco-crossings, screens, embankments, landscaping). As it is not possible to change the environmental risks on all roads and for all species at present, it is necessary to identify the most vulnerable species, assess the risks to populations and the need for mitigation based on analysis of road density and traffic intensity.Problem Statement. With the advent of land transport there was a progressive environmental problem - the transformation of landscapes, it first appeared in countries with developed road infrastructure in Western Europe and the United States, and quickly spread around the globe (Ellenberg, et al., 1981; Fetisov, 1999; Zagorodnyuk, 2006, Ilyukh, Khokhlov, 2012). Numerous publications by both foreign and domestic authors are devoted to the study of the impact of transport infrastructure. Special attention of European authors is paid to the study of the phenomenon of fragmentation of natural ecosystems. In Europe, there is a network of experts and institutions of IENE, which is studying the possibility of implementing preventive measures for landscape fragmentation, promotes the development of transport infrastructure in accordance with environmental requirements, by creating a safe, environmentally sustainable European transport infrastructure.The ecological trail of the road network significantly exceeds its length (Vozniuk, 2014). This is due to the effects of, in particular, mortality on the roads of mammals, reptiles, reptiles (Forman et al. 2003), landscape fragmentation (roads divide the area into isolated areas, with low populations (sometimes below the minimum), so such populations lose genetic diversity and may become extinct locally), the loss of habitats of species and a decrease in the level of connectivity. In addition to these obvious effects, noise and vibration pollution are added, which inhibit the ability of reptiles, birds and mammals to detect prey or avoid predators (Forman et al. 2003), disturbed light regime (Rich and Longcore 2006). Roads contribute to the development of soil erosion processes, the spread of invasive and introduced species (300-800 seeds/m2 per year are transported to roadside ecotones by vehicles (Von der Lippe and Kowarik 2007), which contributes to the formation of local pseudo-populations), create obstacles and sources. (Forman et al. 2003).Purpose. Substantiation of the principle of ecological continuity regarding the negative impact of transport infrastructure on natural ecosystems and search for possible ways to minimize and prevent such impact.Materials and methods. The main research methods are the application of theoretical general scientific approaches to study: analysis and synthesis of international and domestic scientific and theoretical works, EU documentation (charters, design requirements), Ukrainian legal framework, literature sources; collection and analysis of statistical data to identify the dangers of the impact of road infrastructure on biodiversity and determine the value of the natural landscape.Results. The result is an analysis of the scientific literature on the negative impact of transport infrastructure on animals, systematization of the main impacts for the preparation of methodological documents for organizations planning and designing transport infrastructure in Ukraine to reduce the negative impact.Conclusions. The principle of ensuring ecological continuity is to minimize the negative consequences for the environment. In particular, by leveling the spatial barrier of the public highway. When laying a road through natural ecosystems, it is necessary to build transitions and passages for animals. In this case, their density and type must correspond to the natural rank of the territory. The construction of crossings for animals should be mandatory for all types of roads that cross ecological corridors. This is especially true for smaller roads, completely devoid of any transitions for animals, noise shields (on such roads are more likely to hit animals). An important point is the need to plan preventive methods at the planning stage of road construction. The analysis of the European experience shows that the negative impact of transport infrastructure on biota can be solved by consolidating the efforts of road transport specialists and specialists in the field of nature protection.Keywords:motor road,wildlife crossing, biodiversity, road infrastructure, ecological continuity


2016 ◽  
Vol 43 (10) ◽  
pp. 865-874 ◽  
Author(s):  
Sheng-lin Wang ◽  
Qing-feng Lv ◽  
Hassan Baaj ◽  
Xiao-yuan Li ◽  
Yan-xu Zhao

Freeze–thaw action is considered to be one of the most destructive actions that can induce significant damage in stabilized subgrades in seasonally frozen loess areas. Laboratory tests including frost heave – thaw shrinkage and microstructure change during freeze–thaw cycles were conducted to evaluate the volume change rate of loess stabilized with cement, lime, and fly ash under the impact of cyclic freeze–thaw conditions. The loess specimens collapsed after eight freeze–thaw cycles (192 h), but most stabilized loess specimens had no visible damage after all freeze–thaw cycles were completed. All of the stabilized loess samples underwent a much smaller volume change than the loess alone after the freeze–thaw cycles. Although surface porosity and equivalent diameter of stabilized loess samples increased, the stabilized loess can retain its microstructure during freeze–thaw cycles when the cement content was less than 6%. To ensure freeze–thaw resistance of stabilized loess subgrades, the mix proportions of the three additives was recommended to be 4 to 5% cement, 6% lime, and 10% fly ash.


2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Yu Zhang ◽  
Peixin Shi ◽  
Lijuan Chen ◽  
Qiang Tang

The electroplating sludge may pose serious threat to human health and surrounding environment without safe treatment. This paper investigated the feasibility of using electroplating sludge as subgrade backfill materials, by evaluating the mechanical properties and environmental risk of the cement-coal fly ash solidified sludge. In this study, Portland cement and coal fly ash are used to solidify/stabilize the sludge. After curing for 7, 14, and 28 days, the stabilization/solidification sludge specimens were subject to a series of mechanical, leaching, and microcosmic tests. It was found that the compressive strength increased with the increase of cement content, curing time, and the cement replacement by coal fly ash besides water content. Among these factors, the impact of water content on the compressive strength is most noticeable. It was observed that the compressive strength declined by 87.1% when the water content increased from 0% to 10%. Besides, leaching tests showed that the amount of leaching heavy metals were under the standard limit. These results demonstrated utilization of electroplating sludge in subgrade backfill material may provide an alternative for the treatment of electroplating sludge.


2021 ◽  
pp. 141-148

The rapidly increasing population growth and the steady increase in water requirements for agricultural and industrial development have placed severe stress on the water resources available and the long term use of sewage water for irrigation highly affects soil properties. In this study soil samples were collected from a cauliflower field prior and after sewage water irrigation, and the impact of sewage water irrigation on physical, chemical, and biological properties of soil was compared. For this, tested were pH, Electrical Conductivity (EC), Organic Carbon, available Nitrogen, Phosphorus, Potassium, Calcium, Magnesium, Zinc, Iron, Copper, Manganese, and microbial activity. Soil microbial biomass carbon, basal soil respiration, total viable count of bacteria, coliform population, Pseudomonas species, and Azotobacter significantly increased after sewage water irrigation as compared to prior to irrigation. Nevertheless, the bulk density and Rhizobium species of the soil flooded with sewage water was decreased relative to the same characteristics prior to irrigation. Cauliflower yield was significantly increased when sewage water flooded field as compared to the tube well water flooded field (i.e., water delivered via an iron pipe). Escherichia coli contamination was greater in sewage water and groundwater that can pose health risks for the nearby communities, to farmers and consumer of farm products. Hence, the efficient use of sewage and municipal wastewater successfully increase water resource for irrigation and may help in expanding agricultural production. But excessive use of sewage water may also affect the soil flora and fertility.


2021 ◽  
Vol 7 (4) ◽  
pp. 54-62
Author(s):  
Tetiana Hushtan ◽  
Anatoliy Kolodiychuk

The subject of the study is to substantiate classifications of the factors of innovation development of the industry: according to the priority, traditional, barrier, according to the hierarchical level of innovation, the nature of supply demand for innovation, the peculiarity of the influence of factors on the market environment, the influence of factors on innovation localization, importance of innovations, the effect of innovation, nature of the impact, the power of influence, the type of competition, and other classifications of factors of innovation development of the industry. The need to intensify the development of Ukrainian industry in an innovative way requires the identification of the impact on these processes of various factors. To group these influences, the assessment of these factors should be done in the context of separate classes. For this purpose, it is necessary to develop a classification of innovative factors of industrial development. The purpose of the paper is to investigate and systematize the defining conditions for the activation of innovative development in the industrial sphere. The following methods were used in the work: dialectical method of scientific knowledge, analysis and synthesis, comparative, as well as the method of data generalization. It is proved that the complex non-use of these classifications for the substantiation of innovative development of the industry will improve the quality of planning and forecasting documentation and provisions of industrial policy. The applied meaning arising from the criteria for the classification of factors is based on their specific spatiotemporal and situational application, in particular, in conditions of imperfect competition. The classification of innovative factors of industrial development according to their priority is given. In this classification, the priority is determined by the importance and relevance of innovative industry development tasks on the basis of conclusions made as a result of the literature review. Summarizing the factors of innovation development in the barrier classification allows us to distinguish three aggregated groups of factors: socio-political and managerial, socio-economic, and financial. Our socio-economic analysis of innovative development factors of industry also allowed us to identify the following their classification attributes: the hierarchical level of innovation implementation, the character of demand for innovation, the nature of the impact on the market environment, the type of impact, the time horizon of action, impact on the area of innovation localization, the economic essence of innovation, the nature of the significance of innovation, innovation effect, the nature of effective impact, the power of influence, the type of competition.


Sign in / Sign up

Export Citation Format

Share Document