Pengaruh Ketebalan Plastik Polietilen Densitas Rendah Sebagai Bahan Pengemas terhadap Mutu Daun Seledri (Apium gravelens L.) Selama Penyimpanan Dingin

Salah satu cara yang dilakukan untuk mempertahankan kualitas daun seledri dan memperpanjang umur simpan adalah menggunakan pengemasan dengan ukuran ketebalan plastik polietilen densitas rendah (LDPE) yang tepat dan penyimpanan pada suhu rendah. Tujuan penelitian ini adalah untuk mengetahui pengaruh ketebalan plastik polietilen densitas rendah sebagai bahan pengemas terhadap mutu daun seledri selama penyimpanan dingin dan untuk mengetahui tingkat ketebalan plastik polietilen densitas rendah berapakah yang dapat mempertahankan mutu daun seledri yang terbaik. Metode penelitian ini menggunakan penelitian eksperimental. Rancangan percobaan yang digunakan adalah Rancangan Acak Lengkap (RAL) dengan perlakuan ketebalan plastik polietilen densitas rendah dengan ukuran ketebalan 0,02 mm; 0,03 mm; 0,04 mm; 0,05 mm, 0,06 mm. Pengamatan dilakukan setiap 3 hari sekali dan setiap perlakuan diulang sebanyak 3 kali pada suhu penyimpanan 100 ± 20C selama 18 hari penelitian. Parameter dalam penelitian ini adalah susut bobot, kadar air, warna, tekstur, tingkat kesegaran, dan aroma. Hasil analisis ragam menunjukkan bahwa perlakuan ketebalan plastik LDPE sebagai bahan pengemas daun seledri berpengaruh sangat nyata (P?0,01) terhadap parameter penelitian. Perlakuan terbaik diperoleh dari ketebalan plastik polietilen densitas rendah ukuran 0,04 mm dengan susut bobot 4,64 %, warna 18,97, tekstur 0,0455 N, kadar air 90,22 %, tingkat kesegaran 4,87 dan aroma 5,00. Kesimpulan bahwa tingkat ketebalan plastik LDPE 0,04 dapat mempertahankan mutu daun seledri paling lama diantara ukuran ketebalan yang lainnya yaitu selama 18 hari. One way to maintain the quality of celery and extend shelf life is to use packaging with the right size level of low density polyethylene (LDPE) and storage at low temperatures. The purpose of this study was to determine the effect of low density polyethylene plastic as a packaging material on the quality of celery during cold storage and to determine what size level of low density polyethylene plastic can maintain the best quality celery. This research method uses experimental research. The study applied a completely Randomized Design (RAL) with one treatment factor: size level of LDPE plastic (0.02 mm, 0.03 mm, 0.04 mm, 0.05 mm, 0.06 mm). Observations were carried out once every 3 days and each treatment was repeated 3 times at a storage temperature of 100 ± 20C for 18 days of the study. The parameters in this study are weight loss, water content, color, texture, level of freshness, and aroma. The results of the analysis of variance showed that the treatment of size level of LDPE plastic as a celery packaging material had a very significant effect (P?0.01) on the research parameters. The best treatment was obtained from the size level of a low density polyethylene plastic size of 0.04 mm with a weight loss is 4.64%, a color is 18.97, a texture is 0.0455 N, a moisture content is 90.22%, a level of freshness is 4.87 and a scent is 5.00. The conclusion that size level of LDPE plastic is 0.04 mm can maintain the longest quality of celery among other size level for 18 days.

Download Full-text

Photo-selective shade nets on the production and quality of sugarcane plantlets

Revista Brasileira de Engenharia Agrícola e Ambiental ◽

10.1590/1807-1929/agriambi.v23n5p366-371 ◽

2019 ◽

Vol 23 (5) ◽

pp. 366-371 ◽

Cited By ~ 1

Author(s):

José J. F. Cordeiro Júnior ◽

Héliton Pandorfi ◽

José A. D. Barbosa Filho ◽

Alex S. Moraes ◽

Luiz A. de Almeida Neto ◽

...

Keyword(s):

Solar Radiation ◽

Substrate Temperature ◽

Principal Component ◽

Global Solar Radiation ◽

Saccharum Officinarum ◽

Low Density Polyethylene ◽

Low Density ◽

Randomized Design ◽

Completely Randomized Design

ABSTRACT Brazil is the world’s largest producer of sugarcane (Saccharum officinarum L.) and research aimed at propagation has promoted higher quality in production. The objective of this study was to investigate the effect of the variation of micrometeorological elements on the survival and quality of pre-sprouted sugarcane plantlets. The study was carried out in a protected environment (UFRPE). Plantlets of the cultivar RB92579 were obtained by the technique of production of pre-sprouted plantlets. The protected environments were divided into four modules covered with low-density polyethylene plastic + photo-selective shade nets and one module without shade net. Micrometeorological data of global and photosynthetically active solar radiation, air temperature, substrate temperature, relative humidity and the solar radiation spectrum were recorded in each module. The experiment was conducted in a completely randomized design and the principal component analysis was used to verify the association between the cultivation modules, micrometeorological variables and crop variables. Anti-UV low-density polyethylene plastic + freshnet led to lower transmittance of global solar radiation, higher percentage of photosynthetically active radiation and lower plantlet mortality. Substrate temperature above 30.2 °C resulted in higher plantlet mortality. Larger spectrum in the red range led to the production of better quality plantlet. The use of freshnet shade net promoted adequate conditions for the cultivation of sugarcane plantlets and allows obtaining better quality plantlets.

Download Full-text

Pengaruh Penambahan Natrium Benzoat dan Suhu Penyimpan Terhadap Mutu Minuman Herbal Cabe Jamu Cair

Rekayasa ◽

10.21107/rekayasa.v13i1.5385 ◽

2020 ◽

Vol 13 (1) ◽

pp. 77-81

Author(s):

Millatul Ulya ◽

Nadiyah Ferah Aronika ◽

Khoirul Hidayat

Keyword(s):

Analysis Of Variance ◽

Sodium Benzoate ◽

Storage Temperature ◽

Total Dissolved Solids ◽

Dissolved Solids ◽

Randomized Design ◽

Completely Randomized Design ◽

Piper Retrofractum ◽

And Storage

Minuman herbal cabe jamu cair merupakan inovasi produk baru yang masih perlu dikaji tentang metode pengawetannya. Penelitian ini bertujuan untuk mengetahui pengaruh penambahan konsentrasi natrium benzoat dan suhu penyimpanan terhadap mutu minuman herbal cabe jamu cair. Rancangan yang digunakan dalam penelitian ini adalah Rancangan Acak Lengkap (RAL) dengan 2 faktor yaitu pengaruh konsentrasi natrium benzoat (0 ppm, 200 ppm, 300 ppm) dan suhu penyimpanan (35 dan 45 °C). Hasil analysis of variance menunjukkan konsentrasi natrium benzoat berpengaruh nyata (P kurang dari 0,05) terhadap total padatan terlarut (TPT), warna dan total mikroba. Suhu penyimpanan berpengaruh nyata (Pkurang dari 0,05) terhadap total padatan terlarut (TPT), warna, dan total mikroba. Interaksi antara konsentrasi natrium benzoat dan suhu penyimpanan berpengaruh nyata (P kurang dari 0,05) terhadap total padatan terlarut (TPT).Kata Kunci: Cabe jamu, natrium benzoat, suhu penyimpanan, mutuEffect of Sodium Benzonate Addition and Storage Temperature on Quality of Piper Retrofractum Vahl Liquid Herbal DrinkABSTRACTPiper retrofractum vahl liquid herbal drink is an innovation of new products need to research about the method. This research aims to determine the effect of sodium benzoate addition and storage temperature on quality of piper retrofractum vahl liquid herbal drink. The design used in this study was a completely randomized design (CRD) with 2 factors, namely the effect of sodium benzoate concentration (0 ppm, 200 ppm, 300 ppm) and storage temperature (35°C and 45°C). The results analysis of variance shows that the concentration of sodium benzoate has a significant effect (P less than 0.05) on total dissolved solids (TDS), color and total microbes. Storage temperature has a significant effect (P less than 0.05) on total dissolved solids (TDS), color and total microbes. The interaction between sodium benzoate concentration and storage temperature was a significant effect (P less than 0.05) to total dissolved solids (TDS).Keywords: piper retrofractum vahl, sodium benzoate, storage temperature, quality .

Download Full-text

THE EFFECT OF POLYPROPYLENE THICKNESS AND TEMPERATURE ON THE QUALITY OF CAYENNE PEPPER DURING STORAGE

International Journal of Research -GRANTHAALAYAH ◽

10.29121/granthaalayah.v8.i10.2020.1901 ◽

2020 ◽

Vol 8 (10) ◽

pp. 278-284

Author(s):

Tri Luchi Proklamita ◽

Aloysius Ng. Lende

Keyword(s):

Weight Loss ◽

Vitamin C ◽

Moisture Content ◽

Combination Treatment ◽

Temperature Treatment ◽

Storage Quality ◽

Randomized Design ◽

Completely Randomized Design ◽

The Right

This study aims to determine the effect of different combinations of plastic thickness and temperature treatment combinations on the quality of cayenne pepper during storage, to determine the combination of plastic thickness and the right temperature to maintain the quality of cayenne pepper during storage. This study used a completely randomized design (CRD) with 9 treatments. The treatments tried in this study were thickness and temperature, namely Polypropylene 0.3 mm + tissue at 5°C, Polypropylene 0.3 mm + tissue at 10°C, Polypropylene 0.3 mm + tissue at 15°C, Polypropylene 0.4 mm + tissue at 5°C, Polypropylene 0.4 mm + tissue at 10°C, Polypropylene 0.4 mm + tissue at 15°C, Polypropylene 0.5 mm + tissue at 5°C, Polypropylene 0.5 mm + tissue at 10°C, Polypropylene 0.5 mm + tissue at 15°C. The treatment was repeated 3 times so that there were 27 experimental units. The results that showed the combination treatment of packaging thickness and temperature had a very significant effect on the storage quality of cayenne pepper on weight loss, vitamin C, texture, moisture content, and color, but had no significant effect on the color of the 8th day of the watershed. The combination treatment of plastic packaging thickness of 0.5 mm and temperature of 5°C can give the best effect on texture, vitamin C, moisture content, weight loss, and color, but at a thickness of 0.3 mm plastic and a temperature of 15°C does not give the best results on color 8th day.

Download Full-text

PERCEPATAN PENGOMPOSAN TANDAN KOSONG KELAPA SAWIT (TKKS) DENGAN PEMBERIAN UREA (Acceleration Composting Empty Fruit Bunches (Efb) With The Application Of Urea)

AgriPeat ◽

10.36873/agp.v18i02.14 ◽

2019 ◽

Vol 18 (02) ◽

pp. 113-124

Author(s):

Journal Journal

Keyword(s):

Weight Loss ◽

Water Content ◽

Palm Oil ◽

Organic N ◽

Empty Fruit Bunches ◽

Randomized Design ◽

Compost Application ◽

Completely Randomized Design ◽

Total P

ABSTRAK Kelapa sawit merupakan tanaman perkebunan yang memegang peranan penting dalam industri pangan. Luas perkebunan kelapa sawit di Indonesia pada tahun 2014 mencapai 10 juta Ha. Pertumbuhan yang pesat diikuti dengan produksi crude palm oil (CPO) dan palm karnel oil (PKO) yang juga meningkat, sekaligus produk sampingan berupa limbah. Salah satu limbah pabrik kelapa sawit yang jumlahnya besar adalah tandan kosong kelapa sawit (TKKS). Tandan kosong kelapa sawit merupakan limbah organik yang berpotensi dimanfaatkan dibidang pertanian. Akan tetapi, TKKS memiliki nilai C/N yang cukup tinggi, akibatnya sukar dan lama untuk terdekomposisi. Salah satu cara pemanfaatan TKKS adalah dengan dilakukan pengomposan dengan pengkayaan urea. Diharapkan dengan perlakuan tersebut TKKS akan cepat terdekomposisi dan dapat segera dimanfaatkan oleh tanaman. Penelitian ini bertujuan untuk (1) mengetahui pengaruh pemberian urea terhadap pengomposan TKKS dan (2) mengetahui pengaruh peningkatan dosis urea terhadap kualitas kompos TKKS. Rancangan yang digunakan dalam penelitian ini adalah Rancangan Acak Lengkap (RAL) faktor tunggal dengan 5 perlakuan, yaitu U1 (urea 0 g setara dengan nilai C/N=), U2 (urea 30,9 g setara dengan nilai C/N=), U3 (urea 79,3 g setara dengan nilai C/N=), U4 (urea 176,1 g setara dengan nilai C/N=) dan U5 (urea 466,3 g setara dengan C/N = ) dan 9 ulangan, sehingga diperoleh 45 satuan percobaan. Hasil penelitian menunjukan bahwa pemberian urea berpengaruh sangat nyata terhadap susut bobot, kadar air, nilai pH kompos, C-organik, N-total, P-tersedia, dan nilai C/N, selain itu pemberian urea mengakibatkan terjadi perubahan tekstur dan warna pada kompos TKKS. Pemberian dosis urea 466,3 g mampu meningkatkan kandungan N-total, serta menurunkan nilai C/N dan nilai pH kompos. Pemberian dosis urea 79,3 g atau setara dengan C/N = mampu meningkatkan kandungan P-tersedia dan kadar air, menurunkan susut bobot dan kandungan C-organik, serta menunjukan perubahan tekstur dan warna yang lebih baik. Kata kunci: tanda kosongkelapa sawit (TKSS), kompos, urea ABSTRACT Empty fruit bunches (EFB) is a solid wastes produced in large quantity from palm oil industry. Empty fruit bunches can be used as compost material, additionally difficult to decompose because it contain cellulose, hemicellulose, and lignin, as well as value of ratio C/N is high. Use EFB as compost material through the provision of urea has been done in this research. Urea are expected to reduce the value of ratio C/N and became a starter for microbial decomposers. The purpose of this research were (1) to determine the effect of urea on composting of EFB and (2) to determine the effect of increasing doses of urea to the quality of compost of EFB. This research was used a single factor of Completely Randomized Design (CRD) with 5 treatments, namely U1 (urea 0 g), U2 (urea 30,9 g), U3 (urea 79,3 g), U4 (urea 176,1 g), and U5 (urea 466,3 g), and 9 replications, until result 45 experimental units. The result showed that urea significant effect on weight loss, water content, value of pH compost, C-organic, N-total, P-available, and value of ratio C/N, besides urea resulted Widodoe, K. dkk Percepatan Pengomposan Tandan Kosong Kelapa Sawit…..…. 114 in a change in texture and color on the compost EFB. Application of urea 466,3 g was able to increase the content of N-total, reduce the value of ratio C/N and the value of pH compost. Application of urea 79,3 g can improve the content of P-available and water content, reduce the weight loss and the content of C-organic, and showed the changes in texture and color as better. Keywords: empty fruit bunches, compost, urea

Download Full-text

Pengujian Umur Simpan Kopi Arabika Bubuk Pada Jenis Kemasan dan Suhu Simpan Yang Berbeda

Jurnal Tanaman Industri dan Penyegar ◽

10.21082/jtidp.v8n1.2021.p37-48 ◽

2021 ◽

Vol 8 (1) ◽

pp. 37

Author(s):

Elsera Br Tarigan ◽

Edi Wardiana ◽

Handi Supriadi

Keyword(s):

Shelf Life ◽

Storage Temperature ◽

Storage Period ◽

Fat Content ◽

Test Method ◽

Life Test ◽

Coffee Plantations ◽

Randomized Design ◽

Completely Randomized Design ◽

And Storage

Coffee is a beverage that is widely consumed around the world. Proper packaging and storage temperature may extend shelf life of ground coffee. The study aimed to analyze the shelf life of ground Arabica coffee stored in different packaging types and temperature, conducted at smallholder coffee plantations in Garut Regency and the Integrated Laboratory of Indonesian Industrial and Beverage Crops Research Institute, Sukabumi, from June to August 2018. A completely randomized design in factorial was used with 3 factors and 2 replications. The first factor was the packaging type which consisted of 3 types: thick alumunium foil 65m (AF65), thick alumunium foil 130m (AF130), and thick lamination 114m (L144). The second factor was the storage temperature which consisted of 3 levels: 25 oC, 35 oC, and 45 oC, while the third factor was the storage period which consisted of 5 levels: coffee unstored, and coffee stored for 2 weeks, 4 weeks, 6 weeks, and 8 weeks. The variables observed were the water and fat content, and the analysis of shelf life was carried out using the ASLT (Accelerated Shelf Life Test) method. The results showed that during storage, the water content increased, whereas the fat content decreased. Fat content is a critical variable in determining the shelf life of coffee. The coffee in AF130 packaging has longer shelf life than in AF65 and L144. To extend the shelf life of coffee packaged in AF130 and L144 is best kept at 45 oC whereas coffee in AF65 packaging is ideally at 25 oC.

Download Full-text

THE EFFECT OF CORONA INCANDESCENT PLASMA RADIATION AND STORAGE TEMPERATURE ON THE VIABILITY OF GARLIC SEEDS (ALLIUM SATIVUM L. LUMBU KUNING VARIETY)

International Journal of Engineering Science Technologies ◽

10.29121/ijoest.v5.i1.2021.149 ◽

2021 ◽

Vol 5 (1) ◽

pp. 11-17

Author(s):

Febiasasti Trias Nugraheni ◽

Erma Prihastanti ◽

Endah Dwi Hastuti

Keyword(s):

Room Temperature ◽

Allium Sativum ◽

Storage Temperature ◽

Germination Percentage ◽

Plasma Radiation ◽

Agricultural Commodity ◽

Time Duration ◽

Randomized Design ◽

Completely Randomized Design ◽

And Storage

Garlic (Allium sativum L.) is an agricultural commodity which is widely consumed by the community. The obstacle experienced in cultivation is that a relatively long dormancy period of about 6-7 months. The dormancy of garlic seeds occurs because the embryo has not yet been fully formed, and the growth hormone and inhibitory hormone are not balanced. The methods used to break dormancy and accelerate germination are by using corona incandescent plasma radiation and storage temperature. The research utilized factorial Completely Randomized Design (CRD), consisting of six treatments with five replications. The first factor was the corona incandescent plasma radiation carried out on the garlic seeds ‘Lumbu Kuning’ variety with time duration of 0, 15, and 30 minutes. The second factor was storage temperature comprising of room temperature and cold temperature of 7oC stored for 30 days. Viability parameters observed are germination percentage dan the length of sprouts. The data were analyzed by using ANOVA followed by the DMRT test at the 95% confidence level. The results showed that corona incandescent plasma radiation influenced the germination percentage using plasma radiation for 15- 30 minutes.

Download Full-text

Sprouting of pre-sprouted sugarcane seedlings and micrometeorological variables under photo-selective nets

Revista Brasileira de Engenharia Agrícola e Ambiental ◽

10.1590/1807-1929/agriambi.v23n8p625-629 ◽

2019 ◽

Vol 23 (8) ◽

pp. 625-629

Author(s):

José J. F. Cordeiro Júnior ◽

Cristiane Guiselini ◽

Héliton Pandorfi ◽

Alex S. Moraes ◽

Dimas Menezes ◽

...

Keyword(s):

Principal Component Analysis ◽

Substrate Temperature ◽

Air Temperature ◽

External Environment ◽

Principal Component ◽

Low Density Polyethylene ◽

Grass Species ◽

Low Density ◽

Randomized Design ◽

Completely Randomized Design

ABSTRACT Sugarcane is a grass species that stands out worldwide in the production of ethanol. Brazil is the world’s largest producer and leader in exports, responsible for more than 50% of the products that are marketed worldwide. The objective of this study was to investigate the effect of photo-selective nets on micrometeorological variables and on sprouting of pre-sprouted sugarcane seedlings. The experiment was carried out in a protected environment at Universidade Federal Rural de Pernambuco - UFRPE, in a completely randomized design. Seedlings of cultivar RB92579 were obtained by the technique of production of pre-sprouted seedlings. The protected environment was divided into four modules corresponding to the treatments: covered with anti-UV low-density polyethylene plastic: + Solpack® red ultranet net, + Solpack® white net, + Solpack® freshnet net and without shade net. Micrometeorological data of air temperature and substrate temperature were recorded in each module. The first count of emergence, sprouting speed index and sprouting percentage were calculated. Principal component analysis was used to verify the association between the cultivation modules and the micrometeorological and sprouting variables of the seedlings. Air temperature in the protected environment was 8.7% higher than that in the external environment. The white net led to sprouting of 78.93%. The substrate temperature above 30.4 °C favored seedling sprouting. The modules with white net and red ultranet net favored seedling sprouting.

Download Full-text

Soursop seedlings: biomasses and biometric relations in different farming environments and substrates – Part II

Engenharia Agrícola ◽

10.1590/1809-4430-eng.agric.v36n2p229-241/2016 ◽

2016 ◽

Vol 36 (2) ◽

pp. 229-241

Author(s):

Edílson Costa ◽

Adriano R. Sassaqui ◽

Anne K. da Silva ◽

Norton H. Rego ◽

Bruna G. Fina

Keyword(s):

Quality Index ◽

Low Density Polyethylene ◽

Joint Analysis ◽

State University ◽

High Quality ◽

Mato Grosso ◽

Randomized Design ◽

Completely Randomized Design ◽

Mato Grosso Do Sul

ABSTRACT The quality of seedling is critical to obtain vigorous plants in the field. The present study aimed to assess biomasses and biometric relations of soursop seedlings. We used different substrates in protected environments. The experiment was performed at the Universidade Estadual do Mato Grosso do Sul (UFMS) (State University of Mato Grosso do Sul). Five farming environments were developed in greenhouses: one covered with low-density polyethylene film (LDPE), another with with polyethylene and heat-reflective cloth under film under 50% shading in aluminized color, monofilament cloth under 50% shading in black, thermo-reflective cloth under 50% shading in aluminized color, and an environment covered with bacuri coconut straw. Substrates were made of manure, humus, cassava branches and vermiculite at different proportions. Each of them varying from 25%, 33.3%, 50% and 75% in mixture combination. Each environment was considered an experiment. A completely randomized design was adopted and later a joint analysis of them. Agricultural greenhouse covered with LDPE and thermo-reflective cloths under 50% of shading, proportionated seedlings with greater biomass. Substrates containing manure are the most suitable for soursop seedlings. High percentages of earthworm humus produce low quality soursop seedlings. Soursop seedlings had a Dickson’s quality index around 0.335. The greenhouse covered only with LDPE film did not produce high quality seedlings.

Download Full-text

Polyethylene-coated carton wraps to reduce the deterioration in internal quality of eggs

Australian Journal of Experimental Agriculture ◽

10.1071/ea9730257 ◽

1973 ◽

Vol 13 (62) ◽

pp. 257

Author(s):

RJ Hughes

Keyword(s):

Storage Temperature ◽

Low Density Polyethylene ◽

Internal Quality ◽

Low Density ◽

Ambient Temperatures

Deterioration in the internal quality of unwashed eggs was reduced when eggs packed in cartons enclosed in paper wraps coated with 0.013 mm of low density polyethylene were compared with eggs packed in unenclosed cartons. During storage at 12.8�C, the reduction in deterioration was slight, but statistically significant, after four days and somewhat greater after eight days. A storage temperature of 23.9�C, simulating ambient temperatures during summer months (December-February) differences after both four and eight days.

Download Full-text

PENGARUH KEMASAN TERHADAP KUALITAS DADIH SUSU SAPI

Buletin Peternakan ◽

10.21059/buletinpeternak.v35i2.596 ◽

2012 ◽

Vol 35 (2) ◽

pp. 96

Author(s):

Miskiyah (Miskiyah) ◽

Wisnu Broto

Keyword(s):

Dairy Product ◽

Total Solid ◽

Buffalo Milk ◽

Packaging Material ◽

Storage Life ◽

Cow Milk ◽

Titratable Acid ◽

Randomized Design ◽

Completely Randomized Design ◽

And Storage

Dadih is a traditional dairy product obtained from a fermentation of buffalo milk and usually packed using bamboo. The usage of bamboo for dadih packaging has limitation in transportation and storage life. This study aimed to examine the effect of packaging material to dadih quality produced from cow milk during storage. Experimental design used at this study was Completely Randomized Design with Factorial pattern (7 x 7). The first factor is packaging material that are bamboo; cup plastic pp; flexypack packaging; clay; flexypack packaging (with evacuation from bamboo); clay (with evacuation from bamboo); cup plastic pp (with evacuation from bamboo). The second factor is storage time (0, 4, 8, 12, 16, 20, and 24 days). Result showed that best packaging to cow milk dadih is flexypack and cup plastic pp. Cow milk dadih that was packed in flexypack and cup plastic pp had storage life up to 24 days at cold temperature (refrigerator). From the perspective of economic, cup plastic pp packaging showed most efficient packaging. Characteristic of cow milk dadih packaged in cup plastic pp were total of titratable acid 1,60%; pH 3,88; viscocity 351,43 cPs; total solid 14,75%; water content 85,25%; ash content 0,90%; protein content 2,43%; fat content 3,68%; total of lactic acid bacteria (LAB) at 8 x 1011 CFUs/g. Total LAB at dadih packaged in other kinds of packaging were >108 CFUs/ml. Organoleptic test showed that cup plastic pp packaging had excellence in tidiness attribute and consumption amenity. Meanwhile, curd of dadih packaged in bamboo and flexypack had excellent at color and aroma. Clay packaging had excellence in mouthfell and texture. In general, the first priority of dadih choosen by panelist was cow milk dadih packed in clay packaging, bamboo treatment to flexypack packaging, and bamboo treatment to cup plastic pp.(Keyword: Dadih, Packaging, Quality)

Download Full-text