scholarly journals Influence of Laser Energy and Annealing on Structural and Optical Properties of CdS Films Prepared by Laser Induced Plasma

2020 ◽  
pp. 1307-1312
Author(s):  
Wadaa S. Hussein ◽  
Ala' Fadhil Ahmed ◽  
Kadhim A. Aadim
Keyword(s):  
Optical Properties ◽  
Annealing Temperature ◽  
Laser Energy ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Laser Induced Plasma ◽  
Visible Spectra ◽  
Uv Visible ◽  
Diffraction Patterns

The current study was achieved on the effects of laser energy and annealing temperature on x-ray structural and optical properties, such as the UV-Visible spectra of cadmium sulfide (CdS). The films were prepared using pules laser deposition technique (PLD) under vacuum at a pressure of 2.5×10-2 mbar with different laser energies (500-800 mJ) and annealing at a temperature of 473K. X-ray diffraction patterns and intensity curves for the CdS showed that the formation of CdS multi-crystallization films at all laser energies. The optical properties of the films were studied and the variables affecting them were investigated in relation to laser energy and changes in temperature.

scholarly journals Laser induced plasma of cadmium oxide: structural, morphological and optical properties

2021 ◽  
Vol 2114 (1) ◽  
pp. 012012
Author(s):  
Tamara S. Hussein ◽  
Ala F. Ahmed
Keyword(s):  
Optical Properties ◽  
Energy Gap ◽  
Cadmium Oxide ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Optical Energy Gap ◽  
X Ray ◽  
Laser Induced Plasma ◽  
Atomic Force ◽  
Doping Ratio

Abstract In this study, the effect of grafting with Iron (Fe) ratios (0.1, 0.3 and 0.5) on the structural and optical properties of cadmium oxide films (CdO) was studied, as these films were prepared on glass bases using the method of pulse laser deposition (PLD). The crystallization nature of the prepared films was examined by X-ray diffraction technique (XRD), which showed that the synthesis of the prepared films is polycrystalline, and Atomic Force Microscope (AFM) images also showed that the increased vaccination with Iron led to an increase in the crustal size ratio and a decrease in surface roughness, The absorption coefficient was calculated and the optical energy gap for the prepared thin films. It was found the absorption decreases and the energy gap decreases with the increase of doping ratio.

Structural and Optical Properties of TiO2 Thin Films Prepared by Thermal Oxidation of Ti Thin Films

2013 ◽  
Vol 770 ◽  
pp. 225-228
Author(s):  
L. Uttayan ◽  
K. Aiempanakit ◽  
M. Horprathum ◽  
P. Eiamchai ◽  
V. Pattantsetakul ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Thermal Oxidation ◽  
Annealing Temperature ◽  
Oxidation Process ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Wafer Substrate ◽  
Uv Visible ◽  
Ti Films

Titanium dioxide (TiO2) films were prepared by thermal oxidation from Ti films. The Ti films were deposited on glass and silicon (100) wafer substrate by dc magnetron sputtering and subsequent with thermal oxidation process. The crystal structure and morphology of TiO2 films were estimated by using X-ray diffractometry (XRD) and field-emission scanning electron microscopy (FE-SEM), respectively. The optical property of TiO2 films was determined by UV-Visible spectrophotometer. The influences of annealing temperature between 200 to 500°C in air for 1 hour on the structure and optical properties of TiO2 films were investigated. The increasing of annealing temperature was directly affected the phase transition from Ti to TiO2. The optical and structural properties of TiO2 films are the best exhibited with increasing the annealing temperature at 500 °C.

Structural and Optical Properties of Commercial Microparticle Zinc Oxide

2020 ◽  
Vol 990 ◽  
pp. 302-305
Author(s):  
Razif Nordin ◽  
Nadia Latiff ◽  
Rizana Yusof ◽  
Wan Izhan Nawawi ◽  
M.Z. Salihin ◽  
...  
Keyword(s):  
Room Temperature ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Xrd Pattern ◽  
X Ray ◽  
Commercial Grade ◽  
Irregular Shapes ◽  
Visible Spectra ◽  
Uv Visible

Commercial grade ZnO were sieved into particle size of 38 to 90 μm at room temperature. X-ray diffraction (XRD) pattern confirms the hexagonal wurzite structure of ZnO microparticles. Irregular shapes of ZnO microparticles were observed by scanning electron microscope (SEM). Fourier transform infrared spectra (FTIR) confirmed the presence of Zn-O band. In addition, Uv-visible spectra (UV-Vis) were empolyed to estimate the band gap energy of ZnO microparticles.

Effects of Fe and Ni Co-Doping on the Optical Properties of TiO2 Thin Films

2019 ◽  
Vol 19 (01) ◽  
pp. 1850046
Author(s):  
Mahboubeh Yeganeh ◽  
Maliheh Mousavi
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Oxygen Vacancies ◽  
Visible Region ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Tio2 Thin Films ◽  
X Ray ◽  
Co Doping ◽  
Uv Visible

In this work, the effects of Fe/Ni co-doping on structural and optical properties of TiO2 thin films were investigated by the X-ray diffraction, scanning electron microscope and UV-visible spectroscopy. The optical properties of transmittance, extinction coefficient, refractive index, real and imaginary parts of dielectric constant of the thin films, prepared by spray pyrolysis, revealed that the absorption in visible region increases due to the influence of Fe/Ni co-doping. The widening of the gap energies is observed as a result of doping. The increased optical gap as a consequence of doping can be explained by decreasing the size of nanoparticles, as confirmed by SEM and increasing the formation of oxygen vacancies as a result of Ni[Formula: see text] substitution to Ti[Formula: see text] and appearance of the Burstein–Moss effect.

scholarly journals The structure and optical properties of organic semiconductor bulk hetrojunction blend (NiPcTs/Alq3) thin films

2019 ◽  
Vol 15 (33) ◽  
pp. 40-48
Author(s):  
Atyaf H. Kadhum
Keyword(s):  
Thin Films ◽  
Heat Treatment ◽  
Optical Properties ◽  
Spin Coating ◽  
Annealing Temperature ◽  
Bulk Heterojunction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible ◽  
Xrd Patterns

The effect of heat treatment on the optical properties of the bulk heterojunction blend nickel (II) phthalocyanine tetrasulfonic acid tetrasodium salt and Tris (8-hydroxyquinolinato) Aluminum (NiPcTs/Alq3) thin films which prepared by spin coating was described in this study. The films coated on a glass substrate with speed of 1500 rpm for 1.5 min and treated with different annealing temperature (373, 423 and 473) K. The samples characterized using UV-Vis, X ray diffraction and Fourier transform Infrared (FTIR) spectra, XRD patterns indicated the presence of amorphous and polycrystalline blend (NiPcTs/Alq3). The results of UV visible shows that the band gap increase with increasing the annealing temperature up to 373 K and decreases with increase the annealing temperature to (423, 473)K respectively.

scholarly journals Structural and Optical Properties ofIn2S3Thin Films Prepared by Flash Evaporation

2004 ◽  
Vol 27 (4) ◽  
pp. 207-214 ◽  
Author(s):  
K. Bouabid ◽  
A. Ihlal ◽  
A. Outzourhit ◽  
E. L. Ameziane
Keyword(s):  
Optical Properties ◽  
Optical Transmission ◽  
Annealing Temperature ◽  
Transmission Spectra ◽  
X Ray Diffraction ◽  
Flash Evaporation ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Optical Gap ◽  
Deposited Films

In2S3thin films were deposited by flash evaporation ofIn2S3powder. The effect of annealing in vacuum and under sulphur atmosphere on the structural and optical properties of these films was investigated. X-ray diffraction studies reveal that the as-deposited films are amorphous. The formation ofβ-In2S3phase is obtained after annealing under vacuum at 693 K. Heat treatments under sulphur pressure lead to the formation of the above phase at a less annealing temperature (573 K). The energy dispersive X-ray (EDX) analysis reveals that the sulphurized films are nearly stoichiometric and those annealed in vacuum are sulphur deficient. Optical transmission spectra showed a slight shift of the absorption edge towards lower wavelengths. The optical gap value varied between 2.4 and 3 eV as a function of the film thickness and the annealing temperature.

Effect of Annealing Temperature on Structural and Optical Properties of (Cu, Al):ZnO Thin Film by Sol-Gel Method

2014 ◽  
Vol 852 ◽  
pp. 314-318
Author(s):  
Ying Xiang Yang ◽  
Qing Nan Shi ◽  
Hong Lin Tan
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Zno Thin Film ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Glass Substrates ◽  
Grain Sizes

The (Cu,Al):ZnO thin films were prepared on glass substrates by sol-gel spin coating technique.The effect of annealing temperature on the structural and optical properties of the (Cu, Al):ZnO thin film was investigated by means of X-ray diffraction and UV-vis spectrophotometer. It has been found that the grain sizes, Optical band gap and the preferred orientation growth of (002) plane were decreased with annealing temperature. the annealing temperature also played a significant role in the blue-shifted phenomenon.

scholarly journals Microstructural, structural and optical properties of nanoparticles of PbO-CrO3 pigment synthesized by a soft route

Cerâmica ◽  
2015 ◽  
Vol 61 (357) ◽  
pp. 118-125 ◽  
Author(s):  
V. D. Araújo ◽  
M. R. B. Andreeta ◽  
L. J. Q. Maia ◽  
R. M. Nascimento ◽  
F. V. Motta ◽  
...  
Keyword(s):  
Optical Properties ◽  
Diffuse Reflectance ◽  
Microstructural Properties ◽  
Polymeric Precursor ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Precursor Method ◽  
X Ray ◽  
Diffraction Patterns ◽  
Good Agreement

PbCrO4 and Pb2CrO5 particles were synthesized by the polymeric precursor method. Structural and microstructural properties of the particles were characterized by scanning electron microscopy with field emission gun, X-ray diffraction, and Raman spectroscopy techniques. The diffuse reflectance technique was employed to study the optical properties in the 400-700 nm range. The optical bandgap of the samples was obtained indirectly. Colorimetric coordinates L*, a*, b* were calculated for the pigment powders as a function of the heat treatment (400-700 ºC). The powders displayed colors ranging from green to red. X-ray diffraction patterns showed the presence of monoclinic PbCrO4 phase in green samples, while red powders had a monoclinic Pb2CrO5 phase structure. The Raman spectra of the PbCrO4 and Pb2CrO5 powders were in good agreement with those reported in the literature. The synthesized compounds can be used as green and red pigments with high thermal stability.

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

scholarly journals Structural and optical properties of SnO2–Al2O3 nanocomposite synthesized via sol-gel route

2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Properties ◽  
Sol Gel ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Scanning Electron

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document