Effect of Yttrium Oxide on Mechanical and Physical Properties of Fe–10%Cu Composite

2020 ◽  
Vol 27 (3) ◽  
pp. 67-72
Author(s):  
Farouk Mahdi ◽  
Omar Mahmood
Keyword(s):  
Mechanical Properties ◽  
Yttrium Oxide ◽  
Low Cost ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Industrial Applications ◽  
Oxide Content ◽  
Nano Oxide ◽  
Mechanical And Physical Properties ◽  
Uniaxial Compaction

Iron-based composites have found a lot of industrial applications such as bearings, camshafts, connecting rods, pulleys, various valves, oil pump gears and many other applications in the automotive and other industries due to their low cost, availability, and high strength. The present study aims to prepare Fe-10 vol.% Cu - (0 – 5) wt.% nano Y2O3 composites by powder metallurgy technique and studying their physical and mechanical properties. The powders were mixed into ball mill for 30 minutes, followed by room temperature uniaxial compaction at 700 MPa for 3 minutes. The green specimens were sintered at 1000 oC for 1 hour. The results of the present study showed that nano yttrium oxide has significant effects on both physical and mechanical properties of Fe-10%Cu composite. The bulk density was increased by 0.92% and the true porosity was decreased by 6.4% on increasing the nano oxide content from 0% to 3% respectively. Vickers microhardness was increased by 5.9% on increasing Y2O3 up to 1% followed by gradual decrease on further increase above 1%. Wear rate was decreased by 21% on increasing the nano oxide content from 0% to 3%. On the other hand, the compressive strength was decreased by 47% on increasing Y2O3 up to 5%

scholarly journals Characteristics and Properties of Biofilms Made from Pure Carrageenan Powder and Whole Seaweed (Kappaphycus sp.)

2020 ◽  
Vol 76 (2) ◽  
pp. 99-110
Author(s):  
Eunice Lua Hanry ◽  
Noumie Surugau
Keyword(s):  
Mechanical Properties ◽  
Low Cost ◽  
Base Material ◽  
Physical And Mechanical Properties ◽  
Glycerol Concentration ◽  
Paper Properties ◽  
Mechanical And Physical Properties ◽  
Water Glycerol ◽  
Degradable Plastics ◽  
Kappa Carrageenan

Petroleum-based plastics are mass produced to meet customers’ demand due to their low cost and versatility. However, plastic waste has become a serious environmental problem. Hence, degradable plastics from renewable sources (e.g. biomass) are now trending for their “green” properties. In this paper, properties of biofilms made from whole seaweed (WS), Kappaphycus sp. and pure kappa-carrageenan powder (PC) were compared. Glycerol, as plasticizer, was added at differing amounts (1%, 2%, 3%, 4% and 5%, v/v) and their appearance, physical and mechanical properties, solubility, and biodegradability were studied. As results, for colour difference and transparency, WS-1% showed higher ?E at 17.09 ± 0.85 with highest opacity at 13.73 mm-1 and least ?E was at 2.73 ± 0.13 for PC-5% with opacity at 0.49 mm-1. For mechanical properties, PC-1% has the highest tensile strength and elastic modulus at 26.63 ± 2.18 MPa and 253.53 ± 19.43 MPa, respectively, whereas WS-5% has the lowest at 0.71 ± 0.15 MPa and 2.47 ± 0.44 MPa, respectively. As for biodegradability, by the first week, WS-5% lost 80% of its weight and PC-1% only lost 3%. Overall, PC biofilms showed better quality in terms of mechanical and physical properties but WS biofilms were faster to degrade and dissolve in water. Glycerol concentration affects most of the properties except for mechanical properties for WS and solubility of both. This study suggests that PC may be a better base material for stronger biofilms but WS are a better choice from environmental and cost aspects.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

scholarly journals Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1369
Author(s):  
Sanjeev Kumar ◽  
Lalta Prasad ◽  
Vinay Kumar Patel ◽  
Virendra Kumar ◽  
Anil Kumar ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Synthetic Fibre ◽  
Low Cost ◽  
Fibre Length ◽  
Physical And Mechanical Properties ◽  
Natural Fibres ◽  
Risk Environment ◽  
Insulation Property ◽  
Natural Leaf

In recent times, demand for light weight and high strength materials fabricated from natural fibres has increased tremendously. The use of natural fibres has rapidly increased due to their high availability, low density, and renewable capability over synthetic fibre. Natural leaf fibres are easy to extract from the plant (retting process is easy), which offers high stiffness, less energy consumption, less health risk, environment friendly, and better insulation property than the synthetic fibre-based composite. Natural leaf fibre composites have low machining wear with low cost and excellent performance in engineering applications, and hence established as superior reinforcing materials compared to other plant fibres. In this review, the physical and mechanical properties of different natural leaf fibre-based composites are addressed. The influences of fibre loading and fibre length on mechanical properties are discussed for different matrices-based composite materials. The surface modifications of natural fibre also play a crucial role in improving physical and mechanical properties regarding composite materials due to improved fibre/matrix adhesion. Additionally, the present review also deals with the effect of silane-treated leaf fibre-reinforced thermoset composite, which play an important role in enhancing the mechanical and physical properties of the composites.

scholarly journals Properties of High-Strength Flowable Mortar Reinforced with Palm Fibers

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Test Results ◽  
Palm Fiber ◽  
Toughness Index ◽  
Strength And Toughness

This study was conducted to determine some physical and mechanical properties of high-strength flowable mortar reinforced with different percentages of palm fiber (0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, and 1.6% as volumetric fractions). The density, compressive strength, flexural strength, and toughness index were tested to determine the mechanical properties of this mortar. Test results illustrate that the inclusion of this fiber reduces the density of mortar. The use of 0.6% of palm fiber increases the compressive strength and flexural strength by about 15.1%, and 16%, respectively; besides, the toughness index (I5) of the high-strength flowable mortar has been significantly enhanced by the use of 1% and more of palm fiber.

SYNTHESIS AND CHARACTERISATION OF WOVENROVING GLASS MAT FOR EPOXYCOMPOSITES

2020 ◽  
Vol 15 (4) ◽  
Author(s):  
Mahesh Mallampati ◽  
Sreekanth Mandalapu ◽  
Govidarajulu C
Keyword(s):  
Tensile Strength ◽  
Glass Fiber ◽  
Low Cost ◽  
Weight Ratio ◽  
High Strength ◽  
Hardness Test ◽  
Industrial Applications ◽  
Sem Analysis ◽  
Low Thermal Expansion ◽  
Manufacturing Techniques

The composite materials are replacing the traditional materials because oftheir superior properties such as high tensile strength, low thermal expansion, high strength to weight ratio, low cost, lightweight, high specific modulus, renewability and biodegradability which are the most basic & common attractive features of composites that make them useful for industrial applications. The developments of new materials are on the anvil and are growing day by day. The efforts to produce economically attractive composite components have resulted in several innovative manufacturing techniques currently being used in the composites industry. Generally, composites consist of mainly two phases i.e., matrix and fiber. In this study, woven roving mats (E-glass fiber orientation (-45°/45°,0°/90°, - 45°/45°),UD450GSM)were cut in measured dimensions and a mixture of Epoxy Resin (EPOFINE-556, Density-1.15gm/cm3), Hardener (FINE HARDTM 951, Density- 0.94 gm/cm3) and Acetone [(CH3)2CO, M= 38.08 g/mol] was used to manufacture the glass fiber reinforced epoxy composite by hand lay-up method. Mechanical properties such as tensile strength, SEM analysis, hardness test, density tests are evaluated.

scholarly journals Influence of kaolin filler on the mechanical properties of Luffa cylindrica/ polyester composite

2021 ◽  
Author(s):  
Aliyu Yaro ◽  
Laminu Kuburi ◽  
Musa Abiodun Moshood
Keyword(s):  
Mechanical Properties ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Low Cost ◽  
Microstructural Analysis ◽  
Polymeric Materials ◽  
Weight Fraction ◽  
Industrial Applications ◽  
Luffa Cylindrica ◽  
Polyester Composite

Abstract Polymeric materials are used in different industrial applications because they retain good environmental properties, low-cost, and easy to produce compared to conventional materials. This study investigated the effect of adding kaolin micro-filler (KF) on the mechanical properties of Luffa Fiber (LCF) reinforced polyester resin. Luffa cylindrica fiber treated with 5% NaOH, varied in weight fraction (5, 10, and 15%wt) was used to reinforce unsaturated polyester resin using hand lay-up method, whereas for the hybrid composite kaolin filler were kept constant at 6wt% fraction while the fibers varied as in the mono-reinforced composite. The samples were machined for mechanical and microstructural analysis. Analysis of the result revealed that the addition of kaolin has enhanced greatly the mechanical properties of Luffa-fibre based composites. The result reveal of the microstructure analysis, shows that there is an improvement in fiber-matrix adhesion.

scholarly journals PENENTUAN SIFAT MEKANIS DAN FISIS BATU BATA DENGAN PENAMBAHAN ARANG TEMPURUNG KELAPA ASAL ALOR

2018 ◽  
Vol 3 (1) ◽  
pp. 80-85
Author(s):  
Ernawati Kawa ◽  
Minsyahril Bukit ◽  
Albert Zicko Johannes
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Compression Strength ◽  
Physical And Mechanical Properties ◽  
Strength Test ◽  
Coconut Shell ◽  
Mechanical And Physical Properties ◽  
Maximum Limit

Abstrak Telah dilakukan penelitian tentang penentuan sifat mekanis dan fisis batu bata dengan penambahan tempurung kelapa asal alor. Penenlitian ini bertujuan mengetahui kualitas batu bata yang memenuhi standar kelayakan sebagai bahan konstruksi dengan penambahan arang tempurung kelapa aal alor dengan presentasi 0%, 5%, 10%, 15% terhadap tanah liat (lempung). Batu bata dicetak dengan prosedur pemadatan, pengringn dan pembakaran. Setelah prosedur pencetakkan selesai kemudian di lanjutkan dengan pengujian sefat mekanis dan sifat fisis, yaitu uji kuat tekan (compression strength), densitas (density), porositas (porosity) hasil  kuat tekan batu bata didapatkan berdasarkan pengujian: a) uji kuat tekan, batu bata tanpa penambahan (0%) : 4,94 meemenuhi standar kuat tekan kelas 50 (SNI 15-2094-2000), b) uji porositas, batu bata 0% dan 5% : 3,82% dan 17,93% memenuhi standar porositas dengan batas maksimum 20% (SNI 15-2094-2000) dan uji densitas, batu bata tidak ada yang memenuhi standar (SII 0021-1978) Kata kunci: sifat mekanis, sifat fisis, tempurung kelapa, densitas, porositas, kuat tekan Abstract A research had been conducted to determine physical and mechanical properties of the bricks with the addition coconut shell charcoal from alor. This research aims at the quality of the bricks to meet the standars of eligibility as a contruction material. The addition of coconut shell charcoal is variate with the presentage 0%, 5%, 10%, 15% to the clay mass. The brick being printed with procedure compaction, drying, and baking. After the printing procedure is done then next is testing the mechanical and physical properties, that is compression strength test, density test, and porosity test. The brick quality result is obtained based on the test: a) compression strength test, the brick without addition (0%) : 4,94  (SNI 15-2094-2000) is comply with the standard compression strength the class 50 , b) porosity test, the brick 0% and 5% (3,82% and 17,93%) meet the standard with the maximum limit 20% ( SNI 15-2094-2000)  , and c) density test, every bricks does not meet the standard (SII 0021- 1978). Keywords: mechanical properties, physical properties, coconut shell, density, porosity, compression strength

Tensile properties of the FFF-processed thermoplastic polyurethane (TPU) elastomer

2021 ◽  
Author(s):  
Budi Arifvianto ◽  
Teguh Nur Iman ◽  
Benidiktus Tulung Prayoga ◽  
Rini Dharmastiti ◽  
Urip Agus Salim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Low Cost ◽  
Thermoplastic Polyurethane ◽  
High Strength ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Fused Filament Fabrication ◽  
Raster Angle ◽  
Manufacturing Techniques

Abstract Fused filament fabrication (FFF) has become one of the most popular, practical, and low-cost additive manufacturing techniques for fabricating geometrically-complex thermoplastic polyurethane (TPU) elastomer. However, there are still some uncertainties concerning the relationship between several operating parameters applied in this technique and the mechanical properties of the processed material. In this research, the influences of extruder temperature and raster orientation on the mechanical properties of the FFF-processed TPU elastomer were studied. A series of uniaxial tensile tests was carried out to determine tensile strength, strain, and elastic modulus of TPU elastomer that had been printed with various extruder temperatures, i.e., 190–230 °C, and raster angles, i.e., 0–90°. Thermal and chemical characterizations were also conducted to support the analysis in this research. The results obviously showed the ductile and elastic characteristics of the FFF-processed TPU, with specific tensile strength and strain that could reach up to 39 MPa and 600%, respectively. The failure mechanisms operating on the FFF-processed TPU and the result of stress analysis by using the developed Mohr’s circle are also discussed in this paper. In conclusion, the extrusion temperature of 200 °C and raster angle of 0° could be preferred to be applied in the FFF process to achieve high strength and ductile TPU elastomer.

Fire-Retardant Plastering Mortars Based on Exfoliated Vermiculite and Volcanic Ash

2021 ◽  
Vol 1043 ◽  
pp. 133-139
Author(s):  
Tolya Khezhev ◽  
Artur Zhurtov ◽  
Alim Kazharov ◽  
Tamerlan Zrumov ◽  
Asharbek Samgurov
Keyword(s):  
Mechanical Properties ◽  
Volcanic Ash ◽  
Cement Mortar ◽  
Low Cost ◽  
Fire Retardant ◽  
Physical And Mechanical Properties ◽  
Strength Characteristics ◽  
Multifunctional Additive ◽  
Solution Density ◽  
Noticeable Increase

The research results on the development of fire-retardant composite cement mortar mixtures on exfoliated vermiculite and volcanic ash with the use of a multifunctional additive are presented D-5. Compositions of fire-retardant composite mortars, which make it possible to significantly improve the physical and mechanical properties of mortar mixtures and mortars, are proposed. Introduction of a multifunctional supplement D-5 in mortar mixtures makes it possible to improve the composite mortar mixtures properties and improve the solution characteristics. Replacement of finely dispersed fraction of exfoliated vermiculite d<0,63 mm volcanic ash by volume in mortar mixtures does not cause a noticeable increase in the solution density, while their strength characteristics increase. The developed composite mortar mixtures meet the requirements of GOST 28013–98 and have a low-cost price due to volcanic ash use.

Sign in / Sign up

Export Citation Format

Share Document