scholarly journals Intergenerational Educational Mobility and Identity: a French-Argentine Comparative Study

2017 ◽  
Vol 11 (2) ◽  
pp. 283
Author(s):  
Miriam Aparicio
Keyword(s):  
Comparative Study ◽  
Driving Forces ◽  
Three Dimensional ◽  
Developed Countries ◽  
Point Of View ◽  
Educational Mobility ◽  
Quantitative Descriptive ◽  
The Masses ◽  
High Level ◽  
Phd Programs

This study forms part of the author’s longstanding research regarding social, educational and professional mobility observed in Argentina across three generations, associated with the factor of Education and with the greater flow of immigrants in the last century. This research encompasses various smaller studies. Here we mention one, a French-Argentine comparative study in which we worked with PhD s from different institutions and different social science PhD programs. Our objective was: a) to analyze what factors (quantitative) and what reasons (qualitative) positively and negatively impacted professional pathways (career mobility); b) to observe the level of educational mobility present in families with PhD s, taking the issue from different paradigms (reproductionist/interactionist): University of elites? University of the masses? The methodology was both quantitative and qualitative, using semi-structured surveys (which included open-ended statements so respondents could expand); the hierarchical evocation technique and interviews. Results: a) we observed the intergenerational educational mobility of PhD s (quantitative-descriptive level); b) we understood some of the “reasons” and “sense” that underlie said mobility and that have either acted as driving forces or have not acted as driving forces of social and cultural-educational promotion (qualitative level). c) We found similar levels of intergenerational educational mobility for PhD s in France and Argentina (graduates of various PhD programs). This result is interesting in the face of well-held myths of educational “hypo mobility” , intergenerational drops in mobility, stagnation, a lack of educational/cultural promotion under “plafond” effects, or a saturation of degree holders, above all in developed countries. From the point of view of identity, this high level of intergenerational educational mobility impacted national, institutional and micro individual identity; three planes in sustained interaction using the author’s theory: The Three Dimensional Spiral of Sense ((2015 a and b).

scholarly journals An Update on Virtopsy- A Modern Forensic Investigation Tool

KYAMC Journal ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 48-52
Author(s):  
Mushtaq Ahmad ◽  
Md Zubaidur Rahman ◽  
Farial Naima Rahman
Keyword(s):  
Imaging System ◽  
Three Dimensional ◽  
Developed Countries ◽  
Point Of View ◽  
The Body ◽  
New Era ◽  
Autopsy Examination ◽  
Resolution Imaging ◽  
Magnetic Resonance Imaging Mri

Virtopsy is a virtual alternative to a traditional autopsy, conducted with scanning and imaging technology. In developed countries Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) are now being evaluated as complementary means for determination of cause of death. This paper explores the latest development and implication of virtopsy from ethical, clinical and technical point of view. Published literature in different journals with strict inclusion and exclusion criteria were extensively reviewed through use of general and Meta search engines to elucidate the applications and implications of virtual autopsy. The modern high-resolution imaging has been used as a well described aid in the setting of post-mortem investigations. Virtopsy introduces a new era in autopsy examination. It utilizes the technological innovation of modern imaging system to obtain best results and three Dimensional (3D) images of the body in multiple plains without mutilation of the human body. Now a days virtopsy is very much acceptable procedure to the forensic society. In western worlds virtopsy is likely to replace conventional autopsies in future. We can also try to implement this modern system in our country. KYAMC Journal.2021;12(1): 48-52

Physical capital stock, technological upgrading and modernisation in Hungary

2005 ◽  
Vol 55 (2) ◽  
pp. 201-221 ◽  
Author(s):  
Andrea Szalavetz
Keyword(s):  
Capital Accumulation ◽  
Physical Capital ◽  
Developed Countries ◽  
Point Of View ◽  
Technology Generation ◽  
Development Policies ◽  
Specific Factors ◽  
Physical Capital Accumulation

This paper discusses the relation between the quality and quantity indicators of physical capital and modernisation. While international academic literature emphasises the role of intangible factors enabling technology generation and absorption rather than that of physical capital accumulation, this paper argues that the quantity and quality of physical capital are important modernisation factors, particularly in the case of small, undercapitalised countries that recently integrated into the world economy. The paper shows that in Hungary, as opposed to developed countries, the technological upgrading of capital assets was not necessarily accompanied by the upgrading of human capital i.e. the thesis of capital skill complementarity did not apply to the first decade of transformation and capital accumulation in Hungary. Finally, the paper shows that there are large differences between the average technological levels of individual industries. The dualism of the Hungarian economy, which is also manifest in terms of differences in the size of individual industries' technological gaps, is a disadvantage from the point of view of competitiveness. The increasing differences in the size of the technological gaps can be explained not only with industry-specific factors, but also with the weakness of technology and regional development policies, as well as with institutional deficiencies.

Guided surgery with 3D printed device: a case report

2020 ◽  
Author(s):  
Michelle Carvalho de Sales ◽  
Rafael Maluza Flores ◽  
Julianny da Silva Guimaraes ◽  
Gustavo Vargas da Silva Salomao ◽  
Tamara Kerber Tedesco ◽  
...  
Keyword(s):  
Operating Time ◽  
Three Dimensional ◽  
Conventional Technique ◽  
Cervical Region ◽  
Mean Deviation ◽  
Apical Region ◽  
Virtual Planning ◽  
Surgical Guide ◽  
Surgical Guides ◽  
High Level

Dental surgeons need in-depth knowledge of the bone tissue status and gingival morphology of atrophic maxillae. The aim of this study is to describe preoperative virtual planning of placement of five implants and to compare the plan with the actual surgical results. Three-dimensional planning of rehabilitation using software programs enables surgical guides to be specially designed for the implant site and manufactured using 3D printing. A patient with five teeth missing was selected for this study. The patient’s maxillary region was scanned with CBCT and a cast model was produced. After virtual planning using ImplantViewer, five implants were placed using a printed surgical guide. Two weeks after the surgical procedure, the patient underwent another CBCT scan of the maxilla. Statistically significant differences were detected between the virtually planned positions and the actual positions of the implants, with a mean deviation of 0.36 mm in the cervical region and 0.7 mm in the apical region. The surgical technique used enables more accurate procedures when compared to the conventional technique. Implants can be better positioned, with a high level of predictability, reducing both operating time and patient discomfort.

Territorial Distribution of Alcohol and Drug Addictions Mortality Concerning Regional Disparities in the Slovak Republic from Year 1996 to Year 2015

2020 ◽  
Keyword(s):  
Mortality Rate ◽  
Slovak Republic ◽  
Regional Disparities ◽  
Point Of View ◽  
Extreme Position ◽  
Data Set ◽  
Female Sex ◽  
Male Sex ◽  
The Individual ◽  
High Level

BACKGROUND: This paper deals with territorial distribution of the alcohol and drug addictions mortality at a level of the districts of the Slovak Republic. AIM: The aim of the paper is to explore the relations within the administrative territorial division of the Slovak Republic, that is, between the individual districts and hence, to reveal possibly hidden relation in alcohol and drug mortality. METHODS: The analysis is divided and executed into the two fragments – one belongs to the female sex, the other one belongs to the male sex. The standardised mortality rate is computed according to a sequence of the mathematical relations. The Euclidean distance is employed to compute the similarity within each pair of a whole data set. The cluster analysis examines is performed. The clusters are created by means of the mutual distances of the districts. The data is collected from the database of the Statistical Office of the Slovak Republic for all the districts of the Slovak Republic. The covered time span begins in the year 1996 and ends in the year 2015. RESULTS: The most substantial point is that the Slovak Republic possesses the regional disparities in a field of mortality expressed by the standardised mortality rate computed particularly for the diagnoses assigned to the alcohol and drug addictions at a considerably high level. However, the female sex and the male sex have the different outcome. The Bratislava III District keeps absolutely the most extreme position. It forms an own cluster for the both sexes too. The Topoľčany District bears a similar extreme position from a point of view of the male sex. All the Bratislava districts keep their mutual notable dissimilarity. Contrariwise, evaluation of a development of the regional disparities among the districts looks like notably heterogeneously. CONCLUSIONS: There are considerable regional discrepancies throughout the districts of the Slovak Republic. Hence, it is necessary to create a common platform how to proceed with the solution of this issue.

scholarly journals Influence of the socio-economic environment on the entrepreneurs behavior. Cases of cuba and ecuador

2021 ◽  
Vol 13 ◽  
pp. 184797902199450
Author(s):  
Reyner Pérez-Campdesuñer ◽  
Gelmar García-Vidal ◽  
Alexander Sánchez-Rodríguez ◽  
Rodobaldo Martínez-Vivar ◽  
Margarita de Miguel-Guzmán ◽  
...  
Keyword(s):  
Comparative Study ◽  
Point Of View ◽  
Personality Characteristics ◽  
Social Model ◽  
Historical Evolution ◽  
Government Regulations ◽  
Failure Risk ◽  
Short And Long Term ◽  
Financial Environment

Entrepreneurship is an important part of any economy today regardless of its level of development. However, not in all contexts do entrepreneurs operate in the same way, nor are they motivated by the same factors. This research seeks to identify possible coincidence factors and differences between entrepreneurs that operate in different contexts from the point of view of their historical evolution, the duration of these and the economic and social model applied in the countries. Specifically, a comparative study is carried out between entrepreneurs from the republics of Ecuador and Cuba considering various variables such as: personality characteristics (attitude to failure, risk, perseverance and innovation), use of the available time fund for work in entrepreneurship; Impact of the environment in relation to: government regulations, taxes, level of competition and availability of suppliers, as well as the structure of personal expenses projected in the short and long term that entrepreneurs assume as a stimulus for their actions. For the development of the study, a description of the behavior of the variables was initially made and later, by hypothesis testing, to verify differences and similarities between both populations. The study allowed us to identify common and divergent aspects between both populations analyzed. Similarly, it showed how differences in the administrative and financial environment in which entrepreneurs operate generate changes in their priorities and projections.

Urban network of China from the perspective of population mobility: Three-dimensional co-occurrence of nodes and links

2021 ◽  
pp. 0308518X2199781
Author(s):  
Xinyue Luo ◽  
Mingxing Chen
Keyword(s):  
Three Dimensional ◽  
Geographical Distance ◽  
Two Dimensional ◽  
Population Mobility ◽  
Urban Network ◽  
Urban Networks ◽  
Low Level ◽  
Medium Level ◽  
High Level ◽  
External Connections

The nodes and links in urban networks are usually presented in a two-dimensional(2D) view. The co-occurrence of nodes and links can also be realized from a three-dimensional(3D) perspective to make the characteristics of urban network more intuitively revealed. Our result shows that the external connections of high-level cities are mainly affected by the level of cities(nodes) and less affected by geographical distance, while medium-level cities are affected by the interaction of the level of cities(nodes) and geographical distance. The external connections of low-level cities are greatly restricted by geographical distance.

Arising of Informal Women's Learn-to-code Communities

2021 ◽  
Vol 21 (2) ◽  
pp. 1-24
Author(s):  
Louise Ann Lyon ◽  
Chelsea Clayton
Keyword(s):  
Learning Community ◽  
Virtual Communities ◽  
Point Of View ◽  
Customer Relationship ◽  
Activity System ◽  
Learning Group ◽  
Management Platform ◽  
High Level ◽  
Verbal Encouragement ◽  
Activity Systems Analysis

Female-focused, grassroots communities purporting to help women learn to code are popping up in a variety of settings, indicating the motivation on the part of the participants to evade male-dominated settings while learning. However, little is known about how these groups function as an activity system. With current technology enabling the forming of virtual communities and the meteoric rise in use of the Salesforce CRM (customer relationship management) platform, a group of women have formed a coaching and learning community designed to help women move from Salesforce administrators to software developers through learning to code. We used activity systems analysis (ASA) to investigate this real-world instance of the larger phenomenon using an ethnographic approach. We used ASA to organize and make sense of the data by first creating a table listing the points on the activity system triangle (subject, rules, object, etc.) and filling in the points of the triangle based on the design of the coaching and learning group as described by participants; this gave us a high-level view of the activity system. To understand the subjects’ point of view of the system, we then created a new column in the table to fill in themes that emerged from our qualitative data analysis organized by dimension of the activity system. This process enabled us to capture the activity and the voices of participants as well as tensions that had emerged in the system. Findings show a range of outcomes, from participants crediting the group as a kickstart to the journey to successfully landing a job as a developer to members stalling in their progress after involvement. Results also show that purposeful tensions of welcoming novice questions and offering unsolicited verbal encouragement built into the activity system create a welcoming, safe environment for women learning to code.

Comparison of the reluctance laminated and solid rotor synchronous machine operating at high temperatures

2019 ◽  
Vol 38 (4) ◽  
pp. 1111-1119 ◽  
Author(s):  
Marcin Lefik ◽  
Krzysztof Komeza ◽  
Ewa Napieralska-Juszczak ◽  
Daniel Roger ◽  
Piotr Andrzej Napieralski
Keyword(s):  
High Speed ◽  
Design Methodology ◽  
Three Dimensional ◽  
Synchronous Machine ◽  
Point Of View ◽  
Heat Sources ◽  
Model Calculations ◽  
Content Type ◽  
Thermal Phenomenon ◽  
Practical Implications

Purpose The purpose of this paper is to present a comparison between reluctance synchronous machine-enabling work at high internal temperature (HT° machine) with laminated and solid rotor. Design/methodology/approach To obtain heat sources for the thermal model, calculations of the electromagnetic field were made using the Opera 3D program including effect of rotation and the resulting eddy current losses. To analyse the thermal phenomenon, the 3D coupled thermal-fluid (CFD) model is used. Findings The presented results show clearly that laminated construction is much better from a point of view of efficiency and temperature. However, solid construction can be interesting for high speed machines due to their mechanical robustness. Research limitations/implications The main problem, despite the use of parallel calculations, is the long calculation time. Practical implications The obtained simulation and experimental results show the possibility of building a machine operating at a much higher ambient temperature than it was previously produced for example in the vicinity of the aircraft turbines. Originality/value The paper presents the application of fully three-dimensional coupled electromagnetic and thermal analysis of new machine constructions designed for elevated temperature.

scholarly journals Nutrition and cancer – global and African perspectives: a focused update

2015 ◽  
Vol 74 (4) ◽  
pp. 437-440 ◽  
Author(s):  
Martin J Wiseman
Keyword(s):  
Physical Inactivity ◽  
Preventive Measures ◽  
Great Majority ◽  
Developed Countries ◽  
Excess Body Weight ◽  
Lower Income ◽  
The World ◽  
Nutritional Transition ◽  
High Level ◽  
Lower Income Countries

The burden of cancer worldwide is predicted to almost double by 2030 to nearly 23 million cases annually. The great majority of this increase is expected to occur in less economically developed countries, where access to expensive medical, surgical and radiotherapeutic interventions is likely to be limited to a small proportion of the population. This emphasises the need for preventive measures, as outlined in the declaration from the United Nations 2011 High Level Meeting on Non-communicable Diseases. The rise in incidence is proposed to follow from increasing numbers of people reaching middle and older ages, together with increasing urbanisation of the population with a nutritional transition from traditional diets to a more globalised ‘Western’ pattern, with a decrease in physical activity. This is also expected to effect a change in the pattern of cancers from a predominantly smoking and infection dominated one, to a smoking and obesity dominated one. The World Cancer Research Fund estimates that about a quarter to a third of the commonest cancers are attributable to excess body weight, physical inactivity and poor diet, making this the most common cause of cancers after smoking. These cancers are potentially preventable, but knowledge of the causes of cancer has not led to effective policies to prevent the export of a ‘Western’ pattern of cancers in lower income countries such as many in Africa.

Sign in / Sign up

Export Citation Format

Share Document