scholarly journals Production of biodiesel from babassu oil using methanol-ethanol blends

2018 ◽  
Vol 35 (1) ◽  
pp. 47
Author(s):  
Fernando Carvalho Silva ◽  
Kiany Sirley Brandão Cavalcante ◽  
Hilton Costa Louzeiro ◽  
Katia Regina Marques Moura ◽  
Adeilton Pereira Maciel ◽  
...  
Keyword(s):  
Specific Gravity ◽  
Vegetable Oils ◽  
Castor Oil ◽  
Kinematic Viscosity ◽  
Volume Ratio ◽  
Biodiesel Production ◽  
Mass Yield ◽  
A Value ◽  
Oil Plant ◽  
Ethanol Blends

Maranhão state in Brazil presents a big potential for the cultivation of several oleaginous species, such as babassu, soybean, castor oil plant, etc... These vegetable oils can be transformed into biodiesel by the transesterification reaction in an alkaline medium, using methanol or ethanol. The biodiesel production from a blend of these alcohols is a way of adding the technical and economical advantages of methanol to the environmental advantages of ethanol. The optimized alcohol blend was observed to be a methanol/ethanol volume ratio of 80 % MeOH: 20 % EtOH. The ester content was of 98.70 %, a value higher than the target of the ANP, 96.5 % (m/m), and the biodiesel mass yield was of 95.32 %. This biodiesel fulfills the specifications of moisture, specific gravity, kinematic viscosity and percentages of free alcohols (methanol plus ethanol) and free glycerin.

scholarly journals Production of biodiesel from babassu oil using methanol-ethanol blends

2010 ◽  
Vol 35 (1) ◽  
pp. 47-54 ◽  
Author(s):  
F. C. Silva ◽  
K. S. B. Cavalcante ◽  
H. C. Louzeiro ◽  
K. R. M. Moura ◽  
A. P. Maciel ◽  
...  
Keyword(s):  
Specific Gravity ◽  
Vegetable Oils ◽  
Castor Oil ◽  
Kinematic Viscosity ◽  
Volume Ratio ◽  
Biodiesel Production ◽  
Mass Yield ◽  
A Value ◽  
Oil Plant ◽  
Ethanol Blends

Maranhão state in Brazil presents a big potential for the cultivation of several oleaginous species, such as babassu, soybean, castor oil plant, etc... These vegetable oils can be transformed into biodiesel by the transesterification reaction in an alkaline medium, using methanol or ethanol. The biodiesel production from a blend of these alcohols is a way of adding the technical and economical advantages of methanol to the environmental advantages of ethanol. The optimized alcohol blend was observed to be a methanol/ethanol volume ratio of 80 % MeOH: 20 % EtOH. The ester content was of 98.70 %, a value higher than the target of the ANP, 96.5 % (m/m), and the biodiesel mass yield was of 95.32 %. This biodiesel fulfills the specifications of moisture, specific gravity, kinematic viscosity and percentages of free alcohols (methanol plus ethanol) and free glycerin.

scholarly journals Comparative Analysis of Biodiesel Production from Five Varieties of Castor Beans

2020 ◽  
pp. 9-22
Author(s):  
Julius Kewir Tangka ◽  
Djousse Kanouo Boris Merlain ◽  
Dontsa Tsafack Bertold Donald ◽  
Max Croft ◽  
Vincent Kitio
Keyword(s):  
Acetic Acid ◽  
Comparative Analysis ◽  
Methyl Ester ◽  
Comparative Study ◽  
Castor Oil ◽  
Kinematic Viscosity ◽  
Ricinus Communis ◽  
Hydraulic Press ◽  
Biodiesel Production ◽  
Significant Difference

A comparative study was conducted to estimate biodiesel productivity of five varieties of castor beans: Ricinus communis zanzibariensis {white black} (castor 1), Ricinus communis sanguineus (castor 2), Ricinus communis carmencita (castor 3), Ricinus communis zanzibariensis {dark black} (castor 4) and Ricinus communis {black Tanzania}(castor 5). The castor beans were preheated to a temperature between 22 and 33 ° C and then pressed with a manual hydraulic press, under 170 bars. The oil obtained was subjected to the transesterification reaction with methanol (99.98% pure) in a proportion of 5: 1 in the presence of sodium hydroxide as a catalyst (10,672g) for 02 hours at temperature between 60 and 70 °C. Purification was performed by reacting the methyl ester formed with heated water (55 °C) and acetic acid. The density, the kinematic viscosity at 21 ° C and the proportion of residual soap were determined later. The results for five castor varieties showed that the oil yields varied from 24 to 26.96 %; the volume of methyl ester was higher with castor 4 and lower with castor 5 but there was no significant difference in the biodiesel yields. Castor 2 has the best yield of biodiesel (93.5%), followed by castor 5 (92.5%), castor 3 (91%), castor 1 (90.75 %) and castor 4 (90%).  Therefore castor oil 2 has a better potential for biodiesel production.

PENGARUH PELARUT KLOROFORM DALAM PEMURNIAN GLISEROL DENGAN PROSES ASIDIFIKASI ASAM KLORIDA

2016 ◽  
Vol 5 (3) ◽  
pp. 38-43
Author(s):  
Windi Monica Surbakti ◽  
Gerson Rico M.H ◽  
Mersi Suriani Sinaga
Keyword(s):  
Fatty Acid ◽  
Volume Ratio ◽  
Biodiesel Production ◽  
Extraction Time ◽  
Glycerol Concentration ◽  
Purification Process ◽  
Soap Content ◽  
Test Volume ◽  
Base Content ◽  
Water Salt

Glycerol as a byproduct of biodiesel production was approximately formed 10% of the biodiesel weight. Impurities which contained in the glycerol such as catalyst, soap, methanol, water, salt, and matter organic non glycerol (MONG) have a significant effect on the glycerol concentration. So, it is necessary to treat the impurities. The purpose of this study is to know the effect of chloroform to glycerol purification process with acidification method using hydrochloric acid as pretreatment process. This research was begun with acid addition to the glycerol to neutralize the base content and to split the soap content into free fatty acid and salt, that are more easily separated from glycerol. Then the process was continued with extraction by the solvent chloroform using the variable of test volume ratio (v/v) (1:1, 1:1.5, 1:2)  and the extraction time (20, 40, and 60 minutes). The results showed that the more volume of solvent used, gave less extraction time to produce high purity of glycerol. The highest purity produced in this study amounted to 90,9082% is obtained at the ratio of the volume solvent (v/v) 1:1 with extraction time 60 minutes.

scholarly journals Optimization of biodiesel production from castor oil by response surface methodology

2017 ◽  
Vol 33 (1) ◽  
pp. 66
Author(s):  
A. Garba ◽  
M. M. Abarshi ◽  
M. B. Shuaib ◽  
R. Sulaiman
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Castor Oil ◽  
Biodiesel Production

E EVALUASI MUTU MINYAK BUMI DENGAN DISTILASI TRUE BOILING POINT (TBP) BERDASARKAN PARAMETER UJI SIFAT FISIKA SEBAGAI BAHAN BAKU PRODUK KEROSIN DAN AVTUR

2019 ◽  
Vol 10 (01) ◽  
pp. 20-27
Author(s):  
Dian Kurnia Sari ◽  
Rian Ternando
Keyword(s):  
Refractive Index ◽  
Specific Gravity ◽  
Crude Oil ◽  
Boiling Point ◽  
Kinematic Viscosity ◽  
Freezing Point ◽  
Smoke Point ◽  
Flash Point ◽  
Primary Process ◽  
Copper Strip

Minyak bumi dievaluasi guna menentukan potensi minyak bumi sebagai bahan baku kilang minyak untuk menghasilkan fraksi yang dikehendaki. Evaluasi yang dilakukan meliputi pengujian sifat umum minyak bumi, klasifikasi minyak bumi dengan distilasi True Boiling Point (TBP) wide cut (pemotongan jarak lebar) serta analisis fraksi kerosin. Fraksi kerosin yang dihasilkan dari primary process dapat diolah menjadi bahan bakar rumah tangga (minyak  tanah) dan bahan bakar lampu penerangan. Selain itu fraksi kerosin juga dapat dioalah menjadi bahan bakar untuk pesawat terbang jenis jet (avtur). Avtur adalah kerosin yang dengan  spesifikasi yang diperketat, terutama mengenai titik uap dan titik beku. Untuk melakukan pengolahan pada minyak bumi perlu diketahui karakteristik dan spesifikasi minyak  bumi (bahan baku) yang akan diolah untuk mengetahui mutu dan manfaat minyak bumi tersebut. Salah satu parameter uji analisis minyak bumi yaitu parameter sifat fisika. Dari data distilasi TBP diperoleh persentase fraksi kerosin Crude Oil 99 PT HS sebesar 29 % vol sedangkan Crude Oil 165 PT RT sebesar 23 % vol. Berdasarkan analisis sifat fisika yang meliputi Specific Gravity, Refractive Index nD20, Freezing Point, Smoke Point, Flash Point “Abel”, Aniline Point, Copper Strip Corrosion, Kinematic Viscosity dan Characterization KUOP. Crude Oil 99 dan Crude Oil 165 memiliki mutu yang baik serta memenuhi spesifikasi produk kerosin maupun produk avtur.

scholarly journals Organomineral fertilization in growth, physiology and phytomass production of castor oil plant BRS energia

2018 ◽  
Vol 13 (13) ◽  
pp. 596-606
Author(s):  
Maria Bezerra Guimaraes Marcia ◽  
Felix de Brito Neto Jose ◽  
Silva Soares Claudio ◽  
Cleber Silva de Lima Alde ◽  
de Fatima Araujo Chaves Fabricia ◽  
...  
Keyword(s):  
Castor Oil ◽  
Growth Physiology ◽  
Oil Plant

scholarly journals Biodiesel Production from Castor Oil and Its Application in Diesel Engine

2014 ◽  
Vol 31 (2) ◽  
pp. 90 ◽  
Author(s):  
S Ismail ◽  
S. A Abu ◽  
R Rezaur ◽  
H Sinin
Keyword(s):  
Diesel Engine ◽  
Castor Oil ◽  
Engine Performance ◽  
Calorific Value ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Mass Ratio ◽  
Performance And Emission ◽  
Transesterification Method ◽  
Optimum Production

In this study, the optimum biodiesel conversion from crude castor oil to castor biodiesel (CB) through transesterification method was investigated. The base catalyzed transesterification under different reactant proportion such as the molar ratio of alcohol to oil and mass ratio of catalyst to oil was studied for optimum production of castor biodiesel. The optimum condition for base catalyzed transesterification of castor oil was determined to be 1:4.5 of oil to methanol ratio and 0.005:1 of potassium hydroxide to oil ratio. The fuel properties of the produced CB such as the calorific value, flash point and density were analyzed and compared to conventional diesel. Diesel engine performance and emission test on different CB blends proved that CB was suitable to be used as diesel blends. CB was also proved to have lower emission compared to conventional diesel.

Sign in / Sign up

Export Citation Format

Share Document