scholarly journals Sediment Transport within the Reservoir of Mandali Dam

2020 ◽  
Vol 26 (2) ◽  
pp. 29-41
Author(s):  
Mustafa Suhail Abed ◽  
Riyadh Z. Azzubaidi
Keyword(s):  
Middle Part ◽  
Hydraulic Characteristics ◽  
High Concentration ◽  
North East ◽  
Annual Reduction ◽  
Intake Structure ◽  
High Elevations ◽  
Narrow Section ◽  
Very High ◽  
Bottom Reservoir

Mandali Dam is one of the small dams in Iraq; it is located on Haran Wadi, Gangir, just 3km north-east Mandali City. Mandali dam consists of four main parts, the dam body, the intake structure, the spillway, and the bottom outlet. The dam body is zoned earth filled with a central core.  The main purposes of the dam are to maintain flow of Wadi Haran, supplying irrigation and drinking water to Mandali City, and recharging the groundwater. Over a period of seven years of operation, the dam lost its ability to store water due to accumulated sediments within its reservoir. The accumulated sediment is about 2.25million m3. The average annual rate of reduction during this period is about 0.321million m3. This is form an annual reduction in the original capacity of the dam by 14.26%. This paper attempts to study the hydraulic characteristics and the characteristics of sediment process including the velocity patterns, the distribution concentration, and bed change of sediment within the reservoir of Mandali Dam. The main conclusions of the study that, the velocity is very high in the upstream of the reservoir, due to the relatively narrow section of the wadi and high elevations of the bottom reservoir at this part and the velocities tend to decrease gradually toward the middle part of the reservoir. High concentration in the reservoir is located at the upstream of the reservoir, due to high flow velocities at the upstream and decrease gradually toward the reservoir outlet from spillway. The thickness of deposited sediment is very high in the middle part of the reservoir due to immediate drop in the velocity of water at this part lead to high deposition of sediment.

Preliminary results of the study on the reasons of the Hai Hau erosion phenomenon

2007 ◽  
Vol 29 (3) ◽  
pp. 415-426
Author(s):  
Pham Van Ninh ◽  
Phan Ngoc Vinh ◽  
Nguyen Manh Hung ◽  
Dinh Van Manh
Keyword(s):  
Mathematical Modeling ◽  
Historical Data ◽  
Middle Part ◽  
Red River ◽  
Erosion Process ◽  
Red River Delta ◽  
The North ◽  
Severe Erosion ◽  
North And South ◽  
Very High

Overall the evolution process of the Red River Delta based on the maps and historical data resulted in a fact that before the 20th century all the Nam Dinh coastline was attributed to accumulation. Then started the erosion process at Xuan Thuydistrict and from the period of 1935 - 1965 the most severe erosion was contributed in the stretch from Ha Lan to Hai Trieu, 1965 - 1990 in Hai Chinh - Hai Hoa, 1990 - 2005 in the middle part of Hai Chinh - Hai Thinh (Hai Hau district). The adjoining stretches were suffered from not severe erosion. At the same time, the Ba Lat mouth is advanced to the sea and to the North and South direction by the time with a very high rate.The first task of the mathematical modeling of coastal line evolution of Hai Hau is to evaluate this important historical marked periods e. g. to model the coastal line at the periods before 1900, 1935 - 1965; 1965 - 1990; 1990 - 2005. The tasks is very complicated and time and working labors consuming.In the paper, the primarily results of the above mentioned simulations (as waves, currents, sediments transports and bottom - coastal lines evolution) has been shown. Based on the obtained results, there is a strong correlation between the protrusion magnitude and the southward moving of the erosion areas.

Ground water quality of selected areas of Punjab and Sind Provinces, Pakistan: Chemical and microbiological aspects

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Ionic Concentration ◽  
Chloride Ions ◽  
Potassium Ions ◽  
Ammonium Ions ◽  
High Concentration ◽  
Phosphate Ions ◽  
Sodium Magnesium ◽  
Very High ◽  
Microbiological Aspects

The assessment of groundwater is essential for the estimation of suitability of water for safe use. An attempt has been made to study the groundwater of selected areas of Punjab (Sheikhupura & Sahiwal) and Sindh (Sindh, Jawar Dharki and Dharki), Pakistan. The results indicate that pH, color and odor were all within limits of WHO that is pH ranges 6.5–8.5, colorless and odorless, respectively. The high values of suspended solids were observed in the Sindh-1 and Dharki samples. Microbiologically only Sahiwal and Jawar Dharki were found fit for drinking purpose. Trace metals analysis of Sheikhupura-1 and Sindh-1 showed that values do not fall within limits of WHO for Iron. The ionic concentration analysis showed that high bicarbonate (HCO3-), ions are present in the samples of Sahiwal and Dharki; Sindh-1 and Jawar Dharki samples showed very high concentration for chloride ions, all samples were satisfactory level for sulphate (SO42-), sodium, magnesium and phosphate ions except samples of Sindh-1 and Jawar Dharki. High concentration of calcium and potassium ions was observed in samples of Sindh-1, while all other samples were found fit for drinking purposes in respect of nitrate, nitrite and ammonium ions. The high concentration of Fluoride was found only in Sheikhupura-2 samples.

scholarly journals Near quantitative synthesis of urea macrocycles enabled by bulky N-substituent

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Yingfeng Yang ◽  
Hanze Ying ◽  
Zhixia Li ◽  
Jiang Wang ◽  
Yingying Chen ◽  
...  
Keyword(s):  
High Efficiency ◽  
Molecular Structures ◽  
High Yield ◽  
Kinetic Control ◽  
High Concentration ◽  
Weak Association ◽  
Quantitative Synthesis ◽  
Thermodynamic Stabilization ◽  
Discrete Structures ◽  
Very High

AbstractMacrocycles are unique molecular structures extensively used in the design of catalysts, therapeutics and supramolecular assemblies. Among all reactions reported to date, systems that can produce macrocycles in high yield under high reaction concentrations are rare. Here we report the use of dynamic hindered urea bond (HUB) for the construction of urea macrocycles with very high efficiency. Mixing of equal molar diisocyanate and hindered diamine leads to formation of macrocycles with discrete structures in nearly quantitative yields under high concentration of reactants. The bulky N-tert-butyl plays key roles to facilitate the formation of macrocycles, providing not only the kinetic control due to the formation of the cyclization-promoting cis C = O/tert-butyl conformation, but also possibly the thermodynamic stabilization of macrocycles with weak association interactions. The bulky N-tert-butyl can be readily removed by acid to eliminate the dynamicity of HUB and stabilize the macrocycle structures.

Small-volume vitrification and rapid warming yield high survivals of one-cell rat embryos in cryotubes

2021 ◽  
Author(s):  
Yasuyoshi Fukuda ◽  
Misako Higashiya ◽  
Takahiro Obata ◽  
Keita Basaki ◽  
Megumi Yano ◽  
...  
Keyword(s):  
Cooling Rate ◽  
Small Volume ◽  
Sucrose Solution ◽  
High Concentration ◽  
Rat Embryos ◽  
Low Concentrations ◽  
Intracellular Ice Formation ◽  
Intracellular Ice ◽  
Warming Rate ◽  
Very High

Abstract To cryopreserve cells, it is essential to avoid intracellular ice formation during cooling and warming. One way to achieve this is to convert the water inside the cells into a non-crystalline glass. It is currently believed that to accomplish this vitrification, the cells must be suspended in a very high concentration (20–40%) of a glass-inducing solute, and subsequently cooled very rapidly. Herein, we report that this belief is erroneous with respect to the vitrification of one-cell rat embryos. In the present study, one-cell rat embryos were vitrified with 5 μL of EFS10 (a mixture of 10% ethylene glycol, 27% Ficoll, and 0.45 M sucrose) in cryotubes at a moderate cooling rate, and warmed at various rates. Survival was assessed according to the ability of the cells to develop into blastocysts and to develop to term. When embryos were vitrified at a 2,613 °C/min cooling rate and thawed by adding 1 mL of sucrose solution (0.3 M, 50 °C) at a warming rate of 18,467 °C/min, 58.1 ± 3.5% of the EFS10-vitrified embryos developed into blastocysts, and 50.0 ± 4.7% developed to term. These rates were similar to those of non-treated intact embryos. Using a conventional cryotube, we achieved developmental capabilities in one-cell rat embryos by rapid warming that were comparable to those of intact embryos, even using low concentrations (10%) of cell-permeating cryoprotectant and at low cooling rates.

Diffusion In Insect Wing Muscle, The Most Active Tissue Known

1964 ◽  
Vol 41 (2) ◽  
pp. 229-256 ◽  
Author(s):  
TORKEL WEIS-FOGH
Keyword(s):  
Liquid Phase ◽  
Safety Factor ◽  
Metabolic Rates ◽  
High Concentration ◽  
Tracheal System ◽  
Insect Wing ◽  
Main Site ◽  
Normal Diffusion ◽  
Large Fibre ◽  
Very High

1. The tracheal system of insect wing muscle is so dense that between 10-1 and 10-3 of any cut area is occupied by air tubes. In most cases, air tube diffusion of O2 and CO2 through the muscle is therefore several thousand times quicker than diffusion in the liquid phase. 2. In large insects the primary tracheal supply must be strongly ventilated while diffusion is sufficient in the remaining part of the air tubes, even at the highest metabolic rates encountered in any insect. 3. The tracheoles represent the main site of exchange between the gaseous and the liquid phase while the tracheae are of little significance in this respect. The fibres cannot exceed about 20 µ in diameter unless the tracheoles indent the surface and become ‘internal’. 4. Muscular pumping of air and blood due to shortening is of little importance for the exchange of gases but of major importance for the supply with fuel for combustion. However, the large fibre diameters and the tidal nature of the pumping necessitates a very high concentration of fuel in the haemolymph. The high concentration of trehalose in insect blood is considered to be an essential adaptation to flapping flight. 5. The transport by diffusion of O2 and CO2 was followed in detail in a number of concrete examples in the gaseous as well as in the liquid phase. Within a safety factor of 2-3, the rate of transport was always found to be adequate. There is no reason to suggest other mechanisms than a simple, normal diffusion.

Vaporization and Ultra-Fine Particle Generation during the Plasma Spraying Process

1997 ◽  
Author(s):  
K.A. Gross ◽  
P. Fauchais ◽  
M. Vardelle ◽  
J. Tikkanen ◽  
J. Keskinen
Keyword(s):  
Fine Particles ◽  
High Concentration ◽  
Thermal Spray Process ◽  
Particle Generation ◽  
Spray Process ◽  
Ultra Fine Particle ◽  
Fast Cooling ◽  
Ultra Fine Particles ◽  
Plasma Spraying Process ◽  
Very High

Abstract The thermal spray process melts powder at very high temperatures and propels the molten material to the substrate to produce a coherent deposit. This heating produces a certain amount of vaporization of the feedstock. Upon exiting the plasma plume the fast cooling conditions lead to condensation of the vapor. An electrical low pressure impactor was used to monitor the concentration of ultra-fine particles at various radial and axial distances. Metal, namely iron powder, showed very high concentration levels which increase with distance. Ultra-fine particles from ZrO2-8Y2O3 reached a peak concentration at 6 cm. Use of an air barrier during spraying decreases the population of ultra-fine particles facilitating the production of a stronger coating.

The effect of seed rate and nitrogen fertilizer on the yield and nutritive value of oat-vetch mixtures

1989 ◽  
Vol 112 (1) ◽  
pp. 57-66 ◽  
Author(s):  
N. Moreira
Keyword(s):  
Nitrogen Fertilizer ◽  
Crude Protein ◽  
Nutritive Value ◽  
High Yield ◽  
Mineral Nutrient ◽  
Yield Response ◽  
N Nutrition ◽  
North East ◽  
Positive Effect ◽  
Very High

SummaryExperiments were conducted on the seed rates of the components of oat-vetch mixtures combined with varying rates of nitrogen fertilizer in a rainfed area of north-east Portugal in 1982–3 and 1984–5.Forage oats grown alone showed a very high yield response to N and rainfall ranging from 30 to 18·2 t D.M./ha, but had a very low crude protein concentration (37–54 g/kg D.M.) and a poor mineral nutrient composition.The increased use of vetch in the seed mixture had a buffering effect on dry-matter (D.M.) yield but this depended very much on crop N nutrition. For N-deficient conditions vetch inclusion increased the D.M. yield and had a strong positive effect on total forage crude protein (CP) and mineral composition. When crop N nutrition was good, very high D.M. yields (> 12 t D.M./ha) were possible using a high proportion of oats, with vetch making a reduced contribution to the yield and nutritive value of total forage.Seed rates suggested in the literature for Mediterranean conditions are adequate for low N inputs and low available soil N, but not for high D.M. yields which can only be obtained by using a higher proportion of oats and adequate N fertilizer.

scholarly journals Synthesis of [1,2-3H2]cholecalciferol and metabolism of [4-14C,1,2-3H2]- and [4-14C,1-3H]-cholecalciferol in rachitic rats and chicks

1971 ◽  
Vol 121 (4) ◽  
pp. 673-682 ◽  
Author(s):  
D. E. M. Lawson ◽  
B. Pelc ◽  
P. A. Bell ◽  
P. W. Wilson ◽  
E. Kodicek
Keyword(s):  
Vitamin D ◽  
Substance P ◽  
Rat Kidney ◽  
Intracellular Localization ◽  
Specific Radioactivity ◽  
Experimental Period ◽  
Time Interval ◽  
High Concentration ◽  
Very High ◽  
25 Hydroxycholecalciferol

[1,2-3H2]Cholecalciferol has been synthesized with a specific radioactivity of 508mCi/mmol by using tristriphenylphosphinerhodium chloride, the homogeneous hydrogen catalyst. With doses of 125ng (5i.u.) of [4-14C,1-3H2]cholecalciferol the tissue distribution in rachitic rats of cholecalciferol and its metabolites (25-hydroxycholecalciferol and peak P material) was similar to that found in chicken with 500ng doses of the double-labelled vitamin. The only exceptions were rat kidney, with a very high concentration of vitamin D, and rat blood, with a higher proportion of peak P material, containing a substance formed from vitamin D with the loss of hydrogen from C-1. Substance P formed from [4-14C,1,2-3H2]cholecalciferol retained 36% of 3H, the amount expected from its distribution between C-1 and C-2, the 3H at C-1 being lost. 25-Hydroxycholecalciferol does not seem to have any specific intracellular localization within the intestine of rachitic chicks. The 3H-deficient substance P was present in the intestine and bone 1h after a dose of vitamin D and 30min after 25-hydroxycholecalciferol. There was very little 25-hydroxycholecalciferol in intestine at any time-interval, but bone and blood continued to take it up over the 8h experimental period. It is suggested that the intestinal 3H-deficient substance P originates from outside this tissue. The polar metabolite found in blood and which has retained its 3H at C-1 is not a precursor of the intestinal 3H-deficient substance P.

Sign in / Sign up

Export Citation Format

Share Document