scholarly journals Peran dan Mutu Pelaksanaan Pembelajaran oleh Guru di Satuan Pendidikan Tingkat Atas

2021 ◽  
Author(s):  
Zulhafizh Zulhafizh

The purpose of research to analyze the implementation of the role and the quality of learning carried out by teachers in upper-level education units. This research uses descriptive correlation method. The research sample consisted of 142 people who were spread across several upper level education units in Siak Regency, Riau Province. The instrument used for data collection was a Likert scale questionnaire. The analysis technique uses descriptive statistics, Product Moment correlation, normality, and anova. The results showed that all the actions taken had a significant role, namely reaching 47.8%, while 52.3% was determined by other factors. All activities carried out have an influence on the form of learning. The implementation of learning carried out in the upper level education unit has a very high quality standard. The teachers have taken appropriate actions to achieve learning objectives. The ability and skills of teachers in carrying out their duties are a means of realizing productive learning.

2021 ◽  
Vol 9 (2) ◽  
pp. 229
Author(s):  
Georgy Mitrofanov ◽  
Nikita Goreyavchev ◽  
Roman Kushnarev

The emerging tasks of determining the features of bottom sediments, including the evolution of the seabed, require a significant improvement in the quality of data and methods for their processing. Marine seismic data has traditionally been perceived to be of high quality compared to land data. However, high quality is always a relative characteristic and is determined by the problem being solved. In a detailed study of complex processes, the interaction of waves with bottom sediments, as well as the processes of seabed evolution over short time intervals (not millions of years), we need very high accuracy of observations. If we also need significant volumes of research covering large areas, then a significant revision of questions about the quality of observations and methods of processing is required to improve the quality of data. The article provides an example of data obtained during high-precision marine surveys and containing a wide frequency range from hundreds of hertz to kilohertz. It is shown that these data, visually having a very high quality, have variations in wavelets at all analyzed frequencies. The corresponding variations reach tens of percent. The use of the method of factor decomposition in the spectral domain made it possible to significantly improve the quality of the data, reducing the variability of wavelets by several times.


Utilitas ◽  
2002 ◽  
Vol 14 (3) ◽  
pp. 339-359 ◽  
Author(s):  
Torbjorn Tannsjo

Derek Parfit has famously pointed out that ‘total’ utilitarian views, such as classical hedonistic utilitarianism, lead to the conclusion that, to each population of quite happy persons there corresponds a more extensive population with people living lives just worth living, which is (on the whole) better. In particular, for any possible population of at least ten billion people, all with a very high quality of life, there must be some much larger imaginable population whose existence, if other things are equal, would be better, even though its members have lives that are barely worth living. This world is better if the sum total of well-being is great enough, and it is great enough if only enough sentient beings inhabit it. This conclusion has been considered by Parfit and others to be ‘repugnant’.


2011 ◽  
Vol 693 ◽  
pp. 208-216
Author(s):  
Leonel S. Batalla ◽  
Oscar A. Godoy ◽  
María Victoria Canullo

It is well known that mold and casting table maintenance has a direct impact on the internal quality and surface quality of billets. In this paper, the evolution of the main key performance indicators (KPIs) associated with the main consumables of the Wagstaff Air slip billet casting technology is shown, such as molds, casting rings, transition plates and thimbles. The strategies taken to preserve a high standard of quality whilst monitoring the associated costs, are discussed. An automated Mold and Casting Table Maintenance Management system has been developed in house to make available the relevant information from the casting table servicing at the casting pit and at the mold room. A case study is described where this tool allowed us to reduce costs, keeping a high quality standard of the casting table maintenance, ensuring the internal quality of the final product.


2014 ◽  
Vol 1044-1045 ◽  
pp. 1549-1552 ◽  
Author(s):  
Otakar Cigler ◽  
Karel Kubečka ◽  
Petr Waldstein

The construction and rehabilitation of buildings and structures are intervention in the environment of people. Therefore, we are always looking for new technologies that are not only environmentally friendly but also acceptable from the point of view. Speed, flexibility, minimum limit for residents and transport, and also a high efficiency is the reason why more and more in recent years carried out the rehabilitation of sewerage using remediation sleeves. One of the systems of trenchless rehabilitation of sewerage systems used in Western Europe is a system company RELINEEUROPE Alphaliner Liner GmBH & co., the company's Technicians have developed one of the most important practices in the area of trenchless rehabilitation of sewerage systems. A large proportion of the development also has operators and owners of the pipeline. Technology offers very high quality of carried out restorations. This article describes the procedures for ensuring the quality of the used in Germany, which is a world leader in the development, production and use of this technology.


2015 ◽  
Vol 22 (3) ◽  
pp. 291 ◽  
Author(s):  
Purwanto Purwanto ◽  
Thomas Sukardi

This study aims to know the quality of: (1) planning, (2) organizing, (3) actuating, and (4) controlling of mechanical engineering workshop management at SMK in Purworejo Regency. This study is a quantitative study with survey method. The respondents of this study were the practical lesson teachers of mechanical engineering SMK in Purworejo Regency. The data collection techniques were questionnaire, interview, and observation. The data analysis technique used was descriptive statistics. The results showed that: (1) the planning has a good quality with a mean of 2.961; (2) the organizing has a good quality with a mean of 2.947; (3) the actuating has a good quality with a mean of 3.207; and (4) the controlling has a good quality with a mean of 2.874.


2020 ◽  
Author(s):  
Zulhafizh

The research objective is to foster student learning activities through the TIE (Translation, Interpretation, Extrapolation) method. The research method used was descriptive correlational method. The research sample consisted of 75 people. The data instrument was in the form of a Likert scale questionnaire which consisted of the aspects of translation, interpretation, and extrapolation. Data analysis technique used descriptive statistics, Product Moment correlation, chi square normality, and Anova. The result of the study showed that the average score for translation was 3,767 which was in the high category; the average score for interpretation was 4,075 categorized as very high; and the exploration average score was 4,065 categorized as very high. Overall, it was at an average of 3,969 which was in the high category. If the translation, interpretation, and extrapolation activities were carried out properly,it could build up to 99,3% of learning activities. In conlcusion, the TIE method is important to apply in independent learning activities because it can stimulate students' cognition and psychomotor to achieve better learning quality. In addition, it can present insightful and experienced students.


Author(s):  
Almubarak Almubarak ◽  
Muhammad Fakhri Nawidi ◽  
Nurrusshobah Nurrusshobah ◽  
Santi Dwi Sadiah

Validitas dan kepraktisan suatu produk merupakan bagian terpenting dari penelitian pengembangan, terlebih karena kajian yang dibawa bersentuhan dengan kearifan lokal sehingga penting untuk dilakukan. Penelitian ini merupakan R&D (Research & Development). Tujuan penelitian yakni untuk mengetahui validitas dan kepraktisan modul pembelajaran kimia yang dikembangkan. Metode penelitian yang digunakan yakni penelitian pengembangan dengan model Plomp. Teknik pengumpulan data yang dilakukan yakni angket (lembar validasi dan kepraktisan produk). Teknik analisis data yang digunakan yakni Descriptive Statistics Approach. Hasil penelitian menunjukkan bahwa pengembangan modul dinyatakan valid (3,45) dan kepraktisan ditunjukkan dari kemampuan guru mengelola pembelajaran dengan rata-rata 92,89 pada kriteria “sangat tinggi”, serta rata-rata angket respon siswa sebesar 39,90 pada kategori “baik”. Hasil tersebut menunjukkan bahwa modul ajar yang dikembangkan telah memenuhi kriteri sehingga produk ini dinyatakan layak untuk diimplementasi pada pembelajaran kimia. Kesimpulannya bahwa, modul kimia berbasis lahan basah dengan teknologi Augmented Reality (AR)-Sparkol bisa menjadi media pembelajaran kimia yang inovatif agar siswa memahami materi kimia secara nyata, efektif, dan ilmiah. The validity and practicality are the most important part of development research, mainly because the studies carried out are in contact with local wisdom, so it is essential to do this. This research is R&D (Research & Development). The purpose of the study was to determine the validity and practicality of the chemistry learning module developed. The research method used is development research with the Plomp model. The data collection technique used is a questionnaire (validation sheet and product practicality). The data analysis technique used is the Descriptive Statistics Approach. The results showed that the module development was declared valid (3.45), and practicality was shown from the teacher's ability to manage learning with an average of 92.89 on the "very high" criteria and the average student questionnaire response was 39.90 in the "good" category. " These results indicate that the developed teaching module has met the criteria so that this product is declared feasible to be implemented in chemistry learning. The conclusion is that the wetland-based chemistry module with Augmented Reality (AR)-Sparkol technology can be innovative chemistry learning media to understand chemistry in a real, effective, and scientific way. 


2015 ◽  
Vol 21 (3) ◽  
pp. 564-569 ◽  
Author(s):  
Bartlomiej S. Witkowski ◽  
Lukasz Wachnicki ◽  
Sylwia Gieraltowska ◽  
Anna Reszka ◽  
Bogdan J. Kowalski ◽  
...  

AbstractWe present results of cathodoluminescence (CL) investigations of high-quality zinc oxide (ZnO) nanorods obtained by an extremely fast hydrothermal method on a silicon substrate. A scanning electron microscopy (SEM) system equipped with CL allows direct comparison of SEM images and CL maps, taken from exactly the same areas of samples. Investigations are performed at a temperature of 5 K. An interlink between sample microstructure and emission properties is investigated. CL confirms a very high quality of ZnO nanorods produced by our method. In addition, the presence of super radiation effects in ZnO nanorod arrays is suggested.


2021 ◽  
Vol 3 (1) ◽  
pp. 179-180
Author(s):  

The peer review process represents the driving force of journal development, with reviewers acting as the gatekeepers who ensure that Clocks & Sleep maintains its high-quality standard of published papers [...]


Sign in / Sign up

Export Citation Format

Share Document