scholarly journals Biosintesis Nanopartikel Perak Menggunakan Ekstrak Metanol Daun Kemangi (Ocimum Citriodorum)

2017 ◽  
Author(s):  
Yusnita Rifai
Keyword(s):  
Silver Nanoparticles ◽  
Reduction Method ◽  
Average Particle Size ◽  
Mechanical Effect ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Cubic Crystal ◽  
X Ray ◽  
Speed Up ◽  
And Storage

AbstrakNanopartikel perak telah disintesis menggunakan metode reduksi. Dalam penelitian ini, ekstrak metanol daun Kemangi (Ocimum citriodorum) digunakan sebagai agen pereduksi untuk prekursor AgNO3. Sintesis nanopartikel perak dilakukan dengan mencampurkan laru- tan AgNO3 1mM dengan filtrat ekstrak daun kemangi. Hasil karakterisasi UV-Vis menun- jukkan bahwa nilai absorbansi meningkat dengan meningkatnya waktu kontak reaksi. Pun- cak absorbansi spektrum UV-Vis dari sampel biosintesis nanopartikel perak berkisar pada 427-439 nm selama 1 hari dengan pengadukan dan penyimpanan. Ukuran nanopartikel perak ditentukan menggunakan Pengukur Ukuran Partikel (PSA) dengan rata-rata distribusi uku- ran partikel sebesar 57,38 nm. Efek mekanik dalam proses biosintesis nanopartikel perak cenderung mempercepat pembentukan nanopartikel perak. Hasil karakterisasi menggunakan Difraksi Sinar-X (XRD) diketahui kristalit yang terbentuk memiliki intensitas terbesar pada sudut 38° dengan nilai FWHM 0,66310 (ukuran 0,3 nm) dalam sistem kristal kubik.Kata kunci: Biosintesis, Nanopartikel Perak, Ocimum citriodorum, Karakterisasi AbstractSynthesis of silver nanoparticles by using the reduction method with methanol extract basil (Ocimum citriodorum) leaves, which acted as a reducing agent for AgNO3 precursor have been conducted. Synthesis nanoparticles was carried out by mixing the solution of AgNO3 1mM with filtrate extract of Ocimum leaves. The results of characterization showed that absorbance values increased with the increase in reaction time. Peak of UV-Vis absorption spectrum of biosynthesis sample of silver nanoparticles with stirring and storage each at a wavelength 427-439 nm for 1 day. Silver nanoparticles size was determined by using PSA (Particles Size Analyzer) with an average particle size distribution of 57,38 nm. Mechanical effect in biosynthesis process of silver nanoparticles tends to speed up the formation of silver nanoparticles. The result of characterization by using X-Ray Diffraction (XRD) described that the formed crystal had the angle of 38° with the value of FWHM 0,66310 (sixe 0.3 nm) in cubic crystal system.Key word: Biosynthesis, Silver Nanoparticles, Ocimum citriodorum, Characterization.

scholarly journals Sargassum Influx on the Mexican Coast: A Source for Synthesizing Silver Nanoparticles with Catalytic and Antibacterial Properties

2021 ◽  
Vol 11 (10) ◽  
pp. 4638
Author(s):  
Jose Luis López-Miranda ◽  
Rodrigo Esparza ◽  
Marlen Alexis González-Reyna ◽  
Beatriz Liliana España-Sánchez ◽  
Angel Ramon Hernandez-Martinez ◽  
...  
Keyword(s):  
Particle Size ◽  
Silver Nanoparticles ◽  
Average Particle Size ◽  
Antibacterial Properties ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Experimental Parameters ◽  
First Time

This work reports, for the first time, the synthesis of silver nanoparticles using extracts of the species of Sargassum natans and Sargassum fluitans (AgNPs-S). Their antibacterial and catalytic properties are compared with silver nanoparticles obtained by chemical synthesis (AgNPs-C). The characterization of AgNPs-S and AgNPs-C was carried out using ultraviolet–visible spectroscopy (UV–Vis), dynamic light scattering (DLS), zeta potential, a scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis. The synthesis of silver nanoparticles using Sargassum extract was optimized through varying experimental parameters, such as the type of solvent used to prepare the extract, the volume of the extract, and the pH of the system. The most efficient sample (AgNPs-S) was prepared with a water–ethanol-based extract, using a 3:1 volumetric ratio of extract: a precursor salt with the addition of 1 mL of NaOH pH = 14. The AgNPs-C were spherical in shape, with an average particle size of 11.55 nm, while the AgNPs-S were polyhedral shaped, with an average particle size of 26.39 nm. The synthesized AgNPs-S were found to have significantly higher catalytic activity for the degradation of methylene blue and more effective antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa than AgNPs-C.

scholarly journals Thermal, Structural, and Physical Properties of Freeze Dried Tropical Fruit Powder

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
K. A. Athmaselvi ◽  
C. Kumar ◽  
M. Balasubramanian ◽  
Ishita Roy
Keyword(s):  
Particle Size ◽  
Physical Properties ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Tropical Fruit ◽  
X Ray ◽  
Freeze Dried ◽  
Fruit Powder ◽  
Lcr Meter

This study evaluates the physical properties of freeze dried tropical (guava, sapota, and papaya) fruit powders. Thermal stability and weight loss were evaluated using TGA-DSC and IR, which showed pectin as the main solid constituent. LCR meter measured electrical conductivity, dielectric constant, and dielectric loss factor. Functional groups assessed by FTIR showed presence of chlorides, and O–H and N–H bonds in guava, chloride and C–H bond in papaya, and chlorides, and C=O and C–H bonds in sapota. Particle size and type of starch were evaluated by X-ray diffraction and microstructure through scanning electronic microscopy. A semicrystalline profile and average particle size of the fruit powders were evidenced by X-ray diffraction and lamellar/spherical morphologies by SEM. Presence of A-type starch was observed in all three fruits. Dependence of electric and dielectric properties on frequency and temperature was observed.

Preparation and Magnetic Properties of Carbon Encapsulated Fe-Cu Alloy Nanoparticles

2010 ◽  
Vol 177 ◽  
pp. 673-676 ◽  
Author(s):  
Jun Xue ◽  
Hou Kui Xiang ◽  
Hong Qiao Ding ◽  
Shu Li Pang ◽  
Xue Hua Wang ◽  
...  
Keyword(s):  
Magnetic Measurement ◽  
Average Particle Size ◽  
Soft Magnetic Property ◽  
Copper Nitrate ◽  
Synthesis Process ◽  
Ferric Nitrate ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Alloy

Carbon encapsulated Fe-Cu alloys nanoparticles were synthesized by using ferric nitrate, copper nitrate as metal sources and using sucrose as carbon source. The synthesis process involved a step of hydrazine hydrate reduction in alcohol solution and a step of annealing carbonization. The as-prepared samples were characterized by X-ray diffraction technique, X-ray energy dispersion spectrograph, trans- mission electron microscopy and Raman spectroscopy. The results showed the sample was core / shell structure, the metalic core was crystalline FeCu4 alloy, the shell was amorphous carbon, and the average particle size was about 51nm. The magnetic measurement by using a vibrating sample magnetometer revealed that the sample has ultra-soft magnetic property with the saturation magnetization Ms of 13.01 emu/g, residual magnetization Mr of 0.37 emu/g and coercive forces Hc of 54.43 Oe at room temperature.

Preparation and Luminescence Properties of Sr2CeO4 Doped with Ho3+

2013 ◽  
Vol 591 ◽  
pp. 272-276
Author(s):  
Fang Zhang ◽  
Chao Song ◽  
Ling Li Ma ◽  
Xiao Li Xu ◽  
Zi Fei Peng
Keyword(s):  
Sintering Temperature ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
X Ray ◽  
Ultraviolet Excitation ◽  
Near Ultraviolet ◽  
State Method ◽  
Photo Luminescent

Sr2CeO4: Ho3+ was prepared by high-temperature solid-state method. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and photo luminescent (PL). The Sr2CeO4:Ho3+ phosphors showed a red emission under the near-ultraviolet excitation (280 nm) and the main emission centered at 475 nm. It has been found that A+ (A+ = Li+, Na+ or K+) codoped Sr2CeO4: Ho3+ phosphors could lead to a remarkable increase of photoluminescence. Luminous intensity was the highest when doping Li+ ions. Investigation indicated that Sr2Ce0.989O4: 0.001Ho3+, 0.01Li+ exhibited the strongest emission. The average particle size was about 6 um. The optimum sintering temperature was 1200 °C and the possible mechanism was also discussed.

Metallothermic Reduction at Low Temperature Synthesis of Ti4O7 Powder with Lithium Ion Insertion/Extraction Property

2019 ◽  
Vol 956 ◽  
pp. 55-66
Author(s):  
Bei Lei Yan ◽  
Wei Wei Meng ◽  
San Chao Zhao
Keyword(s):  
Reduction Method ◽  
Average Particle Size ◽  
Active Material ◽  
Reduction Process ◽  
Lithium Ion ◽  
Thermal Reduction ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Metallothermic Reduction ◽  
Extraction Property

In this work, a thermal reduction process via ultrafine titanium powder as the reducing agent under argon atmosphere is firstly used to prepare Ti4O7. Compared with the conventional method, this experiment process reduces the sintering temperature to 850°C. The phase transformation and the morphology of the as-prepared powders are examined by X-Ray diffraction (XRD) and scanning electron microscopy (SEM). Besides, it is found that the Ti4O7 powders obtained by titanium thermal reduction method exhibited the crystal structure, distinctly possessing an average particle size around 750 nm. The as-prepared Ti4O7 nanoparticles are used as anode active material in lithium battery. The results demonstrate that the anode with Ti4O7 calcined at 850°C by titanium thermal reduction method exhibited insertion/extraction lithium ion property.

scholarly journals Synthesis of Silver Nanoparticles Using Muntingia Calabura L. Leaf Extract as Bioreductor and Applied as Glucose Nanosensor

2018 ◽  
Vol 34 (6) ◽  
pp. 3088-3094 ◽  
Author(s):  
Abdul Wahid Wahab ◽  
Abdul Karim ◽  
Nursiah La Nafie ◽  
Nurafni Nurafni ◽  
I. Wayan Sutapa
Keyword(s):  
Particle Size ◽  
Silver Nanoparticles ◽  
Reduction Method ◽  
Measurement Range ◽  
Structure Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Size Analyzer ◽  
Muntingia Calabura

Silver nanoparticles have been synthesized by reduction method using extract of Muntingia calabura L. leaf a bioreductor. The process of silver nanoparticles formation was monitored by UV-Vis method. The results showed that the absorbance values increased according to the increase of reaction time. Maximum absorption of silver nanoparticle was obtained at a wavelength of 41-421 nm. The size of silver nanoparticles was determined using a PSA (Particle Size Analyzer) with a particle size distribution of 97.04 nm. The functional groups compound that contribute in the synthesis was analyzed using Fourier Transform Infrared Spectroscopy (FTIR). Morphology of the silver nanoparticles was observed by an Scanning Electron Microscope instrument and the structure characterization of the compounds were analyzed using X-Ray Diffraction. The glucose nanosensor based on silver nanoparticles have the measurement range of 1 mM - 4 mM with the regretion (R2) is 0,9516, the detection limit of sensor is 3,2595 mM, the sensitivity of sensor is 2,0794 A. mM-1. mM-2.

scholarly journals Structural Analysis of Platinum Nanoparticles on Carbon Nanotube Surface as Electrocatalyst System

2017 ◽  
Vol 9 (2) ◽  
pp. 60 ◽  
Author(s):  
Sudirman Sudirman ◽  
Indriyati Indriyati ◽  
Wisnu Ari Adi ◽  
Rike Yudianti ◽  
Emil Budianto
Keyword(s):  
Cell Volume ◽  
Unit Cell Volume ◽  
Average Particle Size ◽  
Unit Cell ◽  
Lattice Parameters ◽  
Atomic Density ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Great Opportunity ◽  
X Ray

Synthesis of Pt/CNT composite by using sol gel method has been performed which the composition of CNT on the composite are vary, (x = 20, 40, 60 and 80 wt%). Performance of composite was characterized by Transmission Electron Microscope (TEM) and X-Ray Diffraction (XRD), respectively. In the refinement results of X-ray diffraction pattern, the composite consists of two phases, namely, carbon and platinum phases. Carbon phase has a structure hexagonal (P 63 m c) with lattice parameters a = b = 2.451(2) Å and c = 6.89(1) Å, α = β = 90° and γ = 120°, the unit cell volume of V = 35.8(1) A3, and the atomic density of ρ = 2.224 g.cm-3. While platinum phase has the structure of cubic (F m -3 m) with lattice parameters a = b = c = 3.921(2) Å, α = β = γ = 90°, the unit cell volume of V = 60.3(1) A3, and the atomic density of ρ = 21.487 g.cm-3.According to the image of TEM, the average particle size for Pt nano particle is estimated to range from 4.1-4.3 nm. While the cavity diameter average of CNT is estimated to range from 5.9-7.5 nm. Based on the calculation, the crystallite size of the Pt particle was around 4.31 nm. The optimum value of dispersed Pt into CNT occurred at 60 wt% CNT with the best composition of Pt in the unit cell of cystal structure. We concluded that this study successfully dispersed Pt nanoparticles onto CNT formed Pt/CNT composite. This was a great opportunity that the composite can be applied as electrocatalyst system on fuel cell application.

DIELECTRIC PROPERTIES OF ULTRAFINE Zn-DOPED CaCu3Ti4O12 CERAMIC

2012 ◽  
Vol 02 (01) ◽  
pp. 1250007 ◽  
Author(s):  
LAXMAN SINGH ◽  
U. S. RAI ◽  
K. D. MANDAL ◽  
MADHU YASHPAL
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Single Phase ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sintered Powder

Ultrafine powder of CaCu2.80Zn0.20Ti4O12 ceramic was prepared using a novel semi-wet method. DTA/TG analysis of dry powder gives pre-information about formation of final product around 800°C. The formation of single phase was confirmed by X-ray diffraction analysis. The average particle size of sintered powder of the ceramic obtained from XRD and Transmission electron microscopy was found 59 nm and 102 nm, respectively. Energy Dispersive X-ray studies confirm the stoichiometry of the synthesized ceramic. Dielectric constant of the ceramic was found to be 2617 at room temperature at 1 kHz.

Effect of Concentration of Iron Oxide on Crystallization Behavior in Leadless Iron Oxide Crystalline Glaze

2012 ◽  
Vol 554-556 ◽  
pp. 18-22
Author(s):  
Supakorn Silakate ◽  
Anucha Wannagon ◽  
Apinon Nuntiya
Keyword(s):  
Iron Oxide ◽  
Nepheline Syenite ◽  
Crystallization Behavior ◽  
Raw Materials ◽  
Average Particle Size ◽  
Average Particle ◽  
Oxide Content ◽  
Iron Oxide Content ◽  
X Ray Diffraction ◽  
X Ray

The objectives of this study were to prepare leadless crystalline glazes from iron oxide by using low temperature firing (1,100°C) and to study the effect of concentration of iron oxide on the phase composition of the glaze raw materials on phase transformation in leadless iron oxide crystalline glaze. The crystalline phases were investigated by using the DTA, X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The composition of the glaze raw materials compose of nepheline syenite, colemanite, pottery stone, bentonite, ZnO, Li2CO3, SiOSubscript text2 and 10, 15 and 20%(w/w) iron oxide (Fe2O3). The glaze raw materials were ground for homogeneous mixtures by ball milling for 24h. The average particle size of the mixture was 3.86 µm. The glaze bodies were carried to firing at 1,100°C at the heating rate of 2°C/min and soaking for 0.5h. Then, the glaze bodies were cooled at the cooling rate of 1°C/min and maintained at 1,080°C for 3h and then maintained at 980°C for 1h, respectively. From the experiment results, it was found that the crystallization temperatures (Tc) of franklinite (ZnFe2O4) and anorthite (CaAl2Si2O8) depend on the concentration of iron oxide content.

scholarly journals Biosintesis Nanopartikel Perak menggunakan Ekstrak Daun Ketapang, Modifikasi dengan Asam p-kumarat untuk Aplikasi Deteksi Melamin

2017 ◽  
Vol 4 (2) ◽  
pp. 367-372
Author(s):  
Andi Rusnaenah ◽  
Muhammad Zakir ◽  
Prastawa Budi
Keyword(s):  
Silver Nanoparticles ◽  
Surface Plasmon Resonance ◽  
Leaf Extract ◽  
Reduction Method ◽  
Coumaric Acid ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Unit Cells ◽  
Visible Absorption Spectroscopy

Biosynthesis of silver nanoparticles (AgNPs) using ketapang leaf extract, modification with p-coumaric acid for detecting melamine has conducted. This research aimed to synthesize AgNPs via bio-reduction method using ketapang leaf extract followed by modification with p-coumaric acid (APK), and evaluating its application detecting melamine. The AgNPs were characterized through ultraviolet-visible absorption spectroscopy (UV-Vis) and X-ray diffraction (XRD). Observation suggested that an increase of incubation time had affected its surface Plasmon resonance trend. Further analysis of crystallite via XRD suggested that nanoparticle size at 43 nm estimated using Debye-Scherer, within the form of unit cells is cubic. The performance of product as melamine detector suggested that the AgNPs-APK had detected melamine in range of concentration from 0.1 to 1000 ppm.

Sign in / Sign up

Export Citation Format

Share Document