scholarly journals Tillering does not interfere on white oat grain yield response to plant density

2003 ◽  
Vol 60 (2) ◽  
pp. 253-258 ◽  
Author(s):  
Milton Luiz de Almeida ◽  
Luís Sangoi ◽  
Márcio Ender ◽  
Anderson Fernando Wamser

Plant density is one of the cropping practices that has the largest impact on individual plant growth. This work was conducted to evaluate the response of white oat (Avena sativa) cultivars with contrasting tillering patterns to variations in plant density. Two field experiments were carried out in Lages, SC, Brazil, during the 1998 and 1999 growing seasons. A split plot experimental design was used. Four oat cultivars were tested in the main plots: UFRGS 14, UFRGS 18, UPF 16 and UPF 17 using five plant densities split plots: 50, 185, 320, 455 and 550 plants m-2. Five plant samples were taken 25, 34, 48, 58 and 70 days after plant emergence to assess the treatment effects on dry matter partition between main stem and tillers. UFRGS 18 promoted dry matter allocation to tillers whereas UPF 17 directed dry mass mostly to the main stem. Differences in dry mass allocation between the main stem and tillers had no impact on grain yield, UPF 16 presenting the highest values for both growing seasons. The lack of interaction between population density and cultivar and the small effect of plant population on grain yield indicates that the oat tillering ability is not fundamental to define its grain yield.

2018 ◽  
Vol 45 (2) ◽  
pp. 82-86 ◽  
Author(s):  
F.D. Morla ◽  
O. Giayetto ◽  
E. M. Fernandez ◽  
G. A. Cerioni ◽  
C. Cerliani

ABSTRACT Plant density is one of the most important management factors affecting the peanut growth, modifying the capacity to capture radiation, water and nutrients. Peanut yield response to increased plant density changes according to environmental conditions, the genotype used, and planting date. Therefore, the optimum plant density (OPD) may vary with location. The aim of this project was (i) to fit the Mitscherlich's equation of diminishing productivities to the yield response of runner-type peanuts to increasing plant density under different growing conditions in the peanut growing region of Cordoba Argentina; and (ii) validate this model with independent experimental data. The first stage was based on the analysis of data from different projects of plant densities carried out in the peanut growing area of Córdoba. This information was adjusted to the decreasing yield equation and the OPD was calculated. For validation, a field experiment was conducted during the 2013/14 and 2014/15 growing seasons under irrigated and rain-fed conditions where pod yield was evaluated for 5, 12, 18, 25 and 36 plants/m2. No interaction was detected between soil moisture conditions and plant density. Yield response to plant density had a high degree of fitness for a wide range of environmental and crop conditions. In field experiments, the peanut yield decreased only at the lowest plant density (5 plants/m2). Yield response to density adjusted to the Mitscherlich equation indicated that OPD ranged from 10.5 to 24.8 plants/m2. Using a single adjustment equation y = 1(1 – e−0.1784x), OPD was estimated to be 16.8 plants/m2 at harvest (11.7 plants per linear meter in 0.7 m between rows) for the peanut growing region of Cordoba. This approach can be a valuable input, along with other variables to analyze, when choosing peanut sowing density.


2017 ◽  
Vol 30 (3) ◽  
pp. 670-678 ◽  
Author(s):  
ROGÉRIO PERES SORATTO ◽  
TIAGO ARANDA CATUCHI ◽  
EMERSON DE FREITAS CORDOVA DE SOUZA ◽  
JADER LUIS NANTES GARCIA

ABSTRACT The objective of this work was to evaluate the effect of plant densities and sidedressed nitrogen (N) rates on nutrition and productive performance of the common bean cultivars IPR 139 and Pérola. For each cultivar, a randomized complete block experimental design was used in a split-plot arrangement, with three replicates. Plots consisted of three plant densities (5, 7, and 9 plants ha-1) and subplots of five N rates (0, 30, 60, 120, and 180 kg ha-1). Aboveground dry matter, leaf macro- and micronutrient concentrations, yield components, grain yield, and protein concentration in grains were evaluated. Lower plant densities (5 and 7 plants m-1) increased aboveground dry matter production and the number of pods per plant and did not reduce grain yield. In the absence of N fertilization, reduction of plant density decreased N concentration in common bean leaves. Nitrogen fertilization linearly increased dry matter and leaf N concentration, mainly at lower plant densities. Regardless of plant density, the N supply linearly increased grain yield of cultivars IPR 139 and Pérola by 17.3 and 52.2%, respectively.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Guangzhou Liu ◽  
Wanmao Liu ◽  
Yunshan Yang ◽  
Xiaoxia Guo ◽  
Guoqiang Zhang ◽  
...  

Abstract Marginal superiority is a common phenomenon in crops, and is caused by the competitiveness of individual plant for resources and crop adaptability to crowded growth conditions. In this study, in order to clarify the response of marginal superiority to maize morphology and plant-density tolerance, field experiments without water and nutrition stress were conducted at Qitai Farm in Xinjiang, China, in 2013–2014 and 2016–2019. The results showed that no more than three border rows of all the cultivars had marginal superiority under high density, about 90% of all the cultivars had no more than two border row that had marginal superiority and a significant negative correlation was observed between marginal superiority and population grain yield (first border row: y = − 2.193x + 213.9, p < 0.05; second border row: y = − 2.076x + 159.2, p < 0.01). Additionally, marginal superiority was found to have a significant positive relationship with plant density (first border row: y = 6.049x + 73.76, p < 0.01; second border row: y = 1.88x + 95.41, p < 0.05) and the average leaf angle above the ear (first border row: y = 2.306x + 103.1, p < 0.01). These results indicated that the smaller the leaf angle above the ear, the weaker the marginal superiority and the higher the grain yield. It suggests that the magnitude of marginal superiority in the border rows can be an indicator for plant-density tolerance under high density. What’s more, cultivars with small leaf angle above the ear can be selected to weaken the marginal superiority and improve grain yield under high plant density. Conversely, cultivars with a large leaf angle above the ear can be selected to achieve higher individual yield in intercropping systems with no more than four rows alternated with other crops.


2012 ◽  
Vol 40 (1) ◽  
pp. 201 ◽  
Author(s):  
Shakeel AHMAD ◽  
Mirza HASANUZZAMAN

Two field experiments were conducted for two years (2000 and 2001) at Agronomic Research Area, University of Agriculture Faisalabad (UAF), Pakistan. There were 15 treatment combinations for experiment-I having three plant densities, viz., one seedling hill-1 (PD1), two seedlings hill-1 (PD2) and three seedlings hill-1 (PD3) and five nitrogen rates, viz., 0, (N0); 50, (N50); 100, (N100); 150, (N150); and 200 (N200) kg N ha-1. Experiment-II also included 15 treatments having three plant densities, viz., one seedling hill-1 (PD1), two seedlings hill-1 (PD2) and three seedlings hill-1 (PD3) and five irrigation regimes, viz., 62.5 cm (I1), 77.5 cm (I2), 92.5 cm (I3), 107.5 cm (I4), and 122.5 cm (I5). A randomized complete block design (RCBD) was employed with three repetitions. The results for experiment-I revealed that the highest biomass (1438 g m-2), grain yield (497 g m-2), crop growth rate (15.36 g m-2 d-1), net assimilation rate (4.24 g m-2 d-1) were observed in the treatment having combination of two seedlings hill-1 and 200 kg N ha-1 (PD2N200). The agronomic and economic nitrogen and PAR use efficiencies were also higher in this treatment. In case of experiment-II, the highest biomass and grain yield were obtained in case of treatment having combination of two seedlings hill-1 and 107.5 cm irrigation regime (PD2I107.5). The irrigation application based water productivity ranged from 0.36 kg mm-3 to 0.61 kg mm-1, irrigation plus precipitation based water productivity ranged from 0.32 kg mm-3 to 0.55 kg mm-3 and evapotranspiration based water productivity ranged from 0.65 kg mm-3 to 0.84 kg mm-3 among 15 treatments combination of plant density and irrigation regimes. This study concludes that for increasing the benefits for the resource-poor growers, the integration of crop management practices is an optimum strategy to substantially increase the resources use efficiency under irrigated semiarid environment.


2017 ◽  
Vol 52 (11) ◽  
pp. 997-1005 ◽  
Author(s):  
Lucieli Santini Leolato ◽  
Luis Sangoi ◽  
Murilo Miguel Durli ◽  
Fernando Panison ◽  
Ramon Voss

Abstract: The objective of this work was to evaluate the effect of application of the growth regulator Trinexapac-ethyl on maize response to the increase in plant density at two sowing dates. A field experiment was carried out in the municipality of Lages, state of Santa Catarina, Brazil, during the 2014/2015 and 2015/2016 growing seasons. Two sowing dates (10/15 - preferential, and 12/5 - late), four plant densities (5, 7, 9, and 11 plants m-2), with and without Trinexapac-ethyl application, were tested. The growth regulator was sprayed at a rate of 150 g a.i. ha-1, when hybrid P30F53YH was at the V5 and V10 growth stages. The spraying of Trinexapac-ethyl decreased the stem length above the ear insertion node at both growing seasons. Grain yield ranged from 11,422 to 14,805 kg ha-1, and increased in a quadratic way with the increment in plant density. The highest yields were reached when maize was sown in October. The spraying of Trinexapac-ethyl did not affect grain yield, but decreased the 1,000 kernels mass at both sowing dates. The use of Trinexapac-ethyl does not enhance grain yield of maize hybrid P30F53YH at crowded stands in response to the densification, regardless of sowing time.


2001 ◽  
Vol 136 (3) ◽  
pp. 291-299 ◽  
Author(s):  
J. V. D. K. KUMAR RAO ◽  
C. JOHANSEN ◽  
Y. S. CHAUHAN ◽  
Y. S. CHAUHAN ◽  
V. K. JAIN ◽  
...  

The response of eight long-duration pigeonpea [Cajanus cajan (L) Millsp.] genotypes to irrigation was studied at Gwalior in Central India during the 1990–91, 1991–92 and 1992–93 growing seasons on an Inceptisol. The crop was grown at two spacings as it was expected that crop density could interact with the crop's ability to extract soil moisture. The irrigation treatment received furrow irrigation four times during the 1990–91 and 1992–93 seasons and twice during the 1991–92 season. Grain yields of all genotypes were 11 % higher when planted at higher density than at low density. There was a differential variation in yield and harvest index among genotypes due to season but not due to spacing and irrigation suggesting the validity of the present approach of testing genotypes under optimum conditions. Grain yield declined by 21 % from the 1990 to 1992 season. The decline was > 1 t/ha in some cultivars (ICPL 366, GW3), and between 0·5 and 1·0 t/ha in others (NP [WR] 15, ICP 87143 and ICPL 84072). In others (Bahar, ICP 9174, ICP 8860) the yield fluctuation was < 0·5 t/ha. The genotypes' mean yields were as high as 2·7 t/ha for ICPL 87143, ICPL 84072 and ICPL 366. There was a significant reduction in both grain yield (16 %), and also above-ground plant dry mass (18 %) due to soil moisture limitation in the unirrigated treatment. Both the above-ground plant dry mass and grain yields were significantly more at high plant density than at lower plant density especially with irrigation. The genotypes were found to differ in their response to production environment (irrigation, spacing and to the undefined differences of the 3 years). Genotypic variation in yield within a production environment was found to vary in relation to changes in harvest index and across environment (irrigation, seasons) due to variation in total dry matter production. A lack of negative relationship between the total dry matter and harvest index suggests the possibility of optimizing both for obtaining higher yield from long-duration genotypes.


2020 ◽  
Vol 9 (11) ◽  
pp. e3999118850
Author(s):  
Ritieli Baptista Mambrin ◽  
Darlene Sausen ◽  
Diogo da Silva Moura ◽  
Ivan Ricardo Carvalho ◽  
Vinícius Jardel Szareski ◽  
...  

The objectives of this work were to evaluate the genetic variability of bean lineages in relation to phosphorus accumulation in plant tissues and yield, in addition to identifying efficient bean lineages in the use of phosphorus and responsive to the application of phosphorus in the crop environment. Work was carried out at Plant Science Department of the Federal University of Santa Maria. Concentrations of phosphorus in the nutrient solution between 1.33 and 1.84 mmol L-1 provide higher dry mass of pods, grains, number of grains and grain yield for the cultivars Pérola and IPR88 Uirapurú in the growing seasons autumn-winter and spring-summer. Concentrations between 1.37 and 1.96 mmol L-1 have the highest values of phosphorus in plant tissues, grain yield and phytic acid. Characteristics dry matter of leaves, stem and pods in pod filling, dry matter of grains on maturation, number of grains, number of pods and phosphorus concentration in plant tissues at the pod filling stage are promising because it allows for indirect selection. The nutritional value of leaves in young plants, for phosphorus, equivalent to that of grains. There is genetic variability among the bean lineages studied, for the production of dry mass, yield and accumulation of phosphorus in the tissues. Lineage L 2527 showed to be efficient and responsive to the use of phosphorus for the shoot of the plant. Lineage L 2225 showed to be efficient in the use of phosphorus in shoot, grains and grain production, besides maintaining this characteristic in the two growing seasons. 


2012 ◽  
Vol 42 (12) ◽  
pp. 2145-2152 ◽  
Author(s):  
Rogério Antonio Bellé ◽  
Edileusa Kersting da Rocha ◽  
Fernanda Alice Antonello Londero Backes ◽  
Mauricio Neuhaus ◽  
Natalia Teixeira Schwab

The objectives of this study were to test the effects of different plant densities on stem characteristics in two growing seasons: Fall/Winter and Spring/Summer. The plant densities evaluated were 48, 64, 80, 96, 112 and 128plants m-2. The Fall/Winter growing season was from 04/04/2008 to 23/08/2008 and the Spring/Summer growing season was from 03/10/2008 to 23/12/2008. Total and partial plant height did not differ among plant densities in the Fall/Winter growing season. However, in the Spring/Summer growing season total plant height had a quadratic response to increase in plant population whereas the partial height did not vary. In the Fall/Winter cultivation, plants presented larger stems and branches diameter, branches length and total number of nodes main stem and branches diameters, number and length of branches, fresh and dry mass decreased as density increased in the two growing seasons. The capitulum's diameter decreased as density increased in the Fall/Winter growing season, but at the Spring/Summer growing season it decreased in the density from 48 to 96plants m-2 and increased in the density from 112 a 128plants m-2.


2021 ◽  
Vol 10 (9) ◽  
pp. e39310914751
Author(s):  
Mariana Alves de Oliveira ◽  
Claudemir Zucareli ◽  
Allan Ricardo Domingues ◽  
Lucas Augusto de Assis Moraes ◽  
Leandro Teodoski Spolaor ◽  
...  

Plant growth regulators, which can alter the plant size and anatomy, allow the use of cultivars of interest that do not have a modern leaf architecture, making higher plant densities possible. The objective of this study was to evaluate the agronomic performance of second season corn, grown at different plant densities and under Trinexapac-ethyl applications at different stages of crop development. The field study was carried out in two growing seasons (2013 and 2014), at the Fazenda Escola of the State University of Londrina. Fifteen treatments were evaluated in a randomized block, 5 x 3 factorial design, at five plant densities (40,000, 60,000, 80,000, 100,000 and 120,000 plants per hectare), of Trinexapac-ethyl applied in three stages: control (no application), V6 and V9, with four replications. The morphological plant characteristics, the yield components and grain yield were evaluated. Increases in plant density raise the plant height, reduce the number of grains per ear, ear length and 100-kernel weight, and have no influence on grain yield. The application of Trinexapac-ethyl in stage V9 reduces plant and ear insertion height and 100-kernel weight.


1973 ◽  
Vol 81 (3) ◽  
pp. 455-463 ◽  
Author(s):  
E. S. Bunting

SUMMARYResults from 10 field experiments are reported. Inra 200, the standard variety in official maize grain trials in Britain, was grown in six of the trials; comparative information was obtained on a range of competitive commercial hybrids and an experimental, early flowering, hybrid. The final plant densities most commonly involved ranged from 5 to 20 plants/m2, with extremes of 2 and 30 plants/m2. The effects of spatial arrangement were also considered in multifactorial or systematic designs; in general, yields increased slightly with more even spacing but no evidence was adduced that spacing, within the limits likely to be encountered in commercial practice, would significantly modify interpretations of density effects.In all varieties tested, a satisfactory model for the response in yield of grain to changes in plant density was 1/y = a + bx + cx2, where y = grain yield/plant and x = density. Estimated parameter values, however, were not the same for all varieties and significant genotype × density interactions were obtained.Grain yield/unit area in Inra 200 was maximal at densities of 8–10 plants/m2, but the response curve did not have a pronounced peak; differences in average yieldat densities ranging from 6 to 14 plants/m2 were less than 6%, and yield at 20 plants/m2 was about 80% of the maximum. Other flint × dent hybrids grown commercially for grain in northern areas (Anjou 210, L.G. 11, Warwick SL 209) reached maximum grain yield/unit area at lower densities (6–8 plants/m2), and the decline in yield with increasing density was much more marked than in Inra 200. In contrast, an earlier flowering, shorter growing, experimental hybrid (ARC 51 A) did not reach maximum yield until density was raised to 14 plants/m2, and was even more tolerant of high plant densities than Inra 200. With increasing plant density the number of ears/plant declined, falling below 1–0 in Inra 200 at densities in excess of 10 plants/m2, and averaging about 0–8 at plants/m2. Over the range 6–20 plants/m2 shelling percentage was reduced by no more than 4%, but water content of the ear (grain plus rachis) increased significantly with density. In the very early hybrid, ARC 51A, the difference in water content of the ear at 6 and 20 plants/m2 was less than 3%, but in Inra 200 it averaged about 8% and in varieties less tolerant of high densities it was often ofthe order of 15%. These results could be related to the delaying effects of increasing density on time of silk emergence. Relatively, time of pollen shed was little affected by density changes. In Inra 200 the difference in time between mid-anthesis and mid-silk was about 7 days more at 20 plants/m2 than at 6 plants/m2 while in Anjou 210 and Kelvedon 59A the comparable increase was 14 days.The practical significance of the findings is discussed in relation to current grain and silage maize production practices, and to future breeding and testing programmes in Northern Europe.


Sign in / Sign up

Export Citation Format

Share Document