scholarly journals The current state of professional training of mechanical engineering specialists in Ukraine

2020 ◽  
Vol 5 (1) ◽  
pp. 9-17
Author(s):  
Sofiia Dembitska ◽  
◽  
Iryna Kobylyanska ◽  
Sergii Puhach ◽  
◽  
...  
Keyword(s):  
Mechanical Engineering ◽  
Professional Training ◽  
Research Problem ◽  
Machine Building ◽  
Building Industry ◽  
Practical Training ◽  
Current State ◽  
Competency Based ◽  
Definition Of ◽  
Different Levels

The article analyzes the features of professional training of future employees of the machine-building industry in higher education institutions of Ukraine. The existing developments on the research problem and practical aspects of training future specialists in mechanical engineering are analyzed. The object of research is the process of professional training of future specialists in mechanical engineering. The purpose of this article is to analyze the features of professional training of future specialists in the machine-building industry with further identification of problems and prospects for improving the professional training of future specialists in mechanical engineering. Based on the analysis of curricula for bachelors and masters of mechanical engineering, the structure of the study load by cycles of disciplines is established. In particular, the share of humanitarian, natural, professional and practical training of future workers in the machine-building industry is determined. The directions of improvement of professional training of future specialists of mechanical engineering by the analysis and adaptation of general didactic principles concerning definition of the maintenance of education are defined: the account of social conditions and needs of a society; compliance of the content of education with the goals of the chosen model of education; structural unity of the content of education at different levels; unity of semantic and procedural aspects of education; accessibility and environmental compliance. Prospects for further research are the development of methodological support for the training of future specialists in engineering specialties on the basis of a competency-based approach

scholarly journals PROSPECTS OF INNOVATIVE DEVELOPMENT OF THE MACHINE-BUILDING INDUSTRY IN AZERBAIJAN

2021 ◽  
Vol 16 (06) ◽  
pp. 37-42
Author(s):  
Natavan Ibragimova Natavan Ibragimova
Keyword(s):  
Economic Development ◽  
Mechanical Engineering ◽  
Machine Building ◽  
Building Industry ◽  
Industrial Complex ◽  
Innovative Development ◽  
Strategic Development ◽  
Current State ◽  
Qualified Personnel ◽  
Development State

The article discusses the priority directions of innovative development of the machine-building complex in Azerbaijan. Mechanical engineering as the most important branch of industry is an industry capable of ensuring sustainable and sustainable innovative development of the country's economy. However, in the era of globalization, this area has faced numerous problems. This can be explained by: a shortage of investments; outdated means of basic production; high competition in domestic and global markets; a shortage of qualified personnel, etc. All this makes it urgent to modernize and recreate the machine-building industry of Azerbaijan in accordance with the requirements of the time. Based on this necessity, the article examines the aspects of sustainable economic development of the machine-building industrial complex. At the end of the article, assessing the current state of the machine-building industrial complex of Azerbaijan, strategic directions of its scientifically-based innovative economic development are proposed. Keywords: strategic development, mechanical engineering, competitiveness, innovative development, state support

Trends and prospects of developing the export potential of Ukraine’s machine building industry

2021 ◽  
Vol 92 (1) ◽  
pp. 43-50
Author(s):  
Olena Liahovska
Keyword(s):  
Mechanical Engineering ◽  
Technological Development ◽  
Labour Force ◽  
Production Capacity ◽  
Machine Building ◽  
Global Market ◽  
Engineering Industry ◽  
Building Industry ◽  
Current State ◽  
Current Production

The purpose of the article is to analyse the current state of development of Ukraine’s mechanical engineering, looking at export trends of mechanical engineering products across product groups and the main importing countries. The analysis indicates that Ukrainian exports of engineering products have declined significantly in recent years. The low export orientation of machine-building production is mainly due to the low level of innovation investment, as a result of which the technological development of Ukraine’s machine building industry not aligned with the requirements of the global market. The author indicates directions of machine-building production that can make the Ukrainian industry more competitive in the future arguing that thanks to the current production capacity and technological skills, availability of the labour force, research institutions, opportunities for international cooperation, Ukraine is well-positioned to increase the export potential of the mechanical engineering industry.

scholarly journals АНАЛІЗ РИНКУ МАШИНОБУДУВАННЯ УКРАЇНИ: ПРОБЛЕМИ І ПЕРСПЕКТИВИ РОЗВИТКУ

2020 ◽  
pp. 21-28
Author(s):  
Юлія Борисівна Кракос ◽  
Аліна Олександрівна Приходько
Keyword(s):  
Mechanical Engineering ◽  
Machine Building ◽  
The State ◽  
Engineering Industry ◽  
Building Industry ◽  
Industrial Complex ◽  
Current State ◽  
General Scientific ◽  
Further Development

In the light of globalization processes at the present stage of development of the Ukrainian economy, domestic enterprises of the machine-building industry faced the problem of increasing their competitiveness in the world market, which in turn contributed to the Activation of their innovative activities. The need of implement measures to increase the level of investment attractiveness of Ukrainian enterprises, determines the feasibility of the analysis of the current state of the machine-building industry. The aim of study is to investigate the role of machine-building industry production in total industrial complex, the research status, the challenges and to identify priorities for further development of engineering in Ukraine that are taking into account the requirements of the Modern market.  Research object. The object of the research is the machine-building industry of Ukraine and its condition in the conditions of world globalization. Methods. Research methods that were used in the process of writing the article - providing for the application of General scientific and empirical approaches to economic science – were based on a systematic approach. The appliance of the dialectical method allows us to highlight the features of modern innovation processes, furthermore, to explore the problems of creating an investment-attractive environment in the machine-building industry of Ukraine.  The traditional method is applied in the study of previous experience chronology of events and facts in the development of the economy of Ukraine.  General scientific systematical and logical methods were also used to obtain research conclusions.  The basis of the information in this paper is on the researches consisted of monographs, scientific articles of domestic, foreign articles, legal activities of the enterprises and data of the State Statistics Service of Ukraine. The hypothesis of the study. Continuous monitoring of the current state of machine building in Ukraine and implementation of the results of its practical analysis will improve the investment attractiveness of the industry.  Presentation of the main material. In this scientific article the role of mechanical Engineering as the leading industry of economy of Ukraine is investigated.  Based on statistical data, the dynamics of the main indicators of development of the machine-building industry of Ukraine for 2010-2018 was analyzed. Significant problems of the studied area are Identified, priorities for further development are determined.  The originality and practical significance of this study is to investigate deeply the main problems of investment attractiveness of the engineering industry.  also this study’s main provisions can serve as a scientific basis for the development of machine-building enterprises, in the context of the study of the problems of increasing the investment attractiveness of the industry.  Conclusions of the study. Since Mechanical Engineering is one of the leading industries, it is an indicator of the technical level of the country.  Lack of financial resources at the enterprises through problems such as low speed potential restoration of production in industry were solved. This leaded to braking of the General development of mechanical engineering of Ukraine.  In challenging situations of financial and economic activity, the enterprises of the machine-building industry need support from the State, in particular that needs a part of tax incentives for large-scale projects to modernize production facilities and Provide domestic producers with state orders.  According to the results of the conducted research it can be argued that the main stimulus for the realization of the industry’s potential is the lack of material resources.  Therefore, the solution for problems of increasing the investment attractiveness of industry will insure the further development of machine-building complex of Ukraine.

scholarly journals FORMATION OF SAFETY SKILLS OF STUDENTS OF MACHINE-BUILDING SPECIALTIES: THEORETICAL ASPECT

2019 ◽  
pp. 16-21
Author(s):  
Sofia Dembitskaya
Keyword(s):  
Higher Education ◽  
Mechanical Engineering ◽  
Professional Training ◽  
Machine Building ◽  
Educational Process ◽  
Professional Activity ◽  
Building Industry ◽  
Institutions Of Higher Education ◽  
Technical Direction

The necessity of development of skills of safety activity of students of machine-building specialties in the process of professional training in institutions of higher education of technical direction are considered in the article. The urgency of the problem of formation of skills of safety activity future specialists in mechanical engineering in the process of professional training in institutions of higher education of technical direction is determined by the peculiarities of future professional activity. The key concepts of research are analyzed, in particular such as «safety activity», «safety competence», «culture of safety» and actual ways of developing labour-protection competence in the process of training specialists in machinebuilding specialties. Based on a solid analysis of scientific publications on the research problem, we outlined the conditions for the formation of skills of labour protection activities of future specialists in mechanical engineering in institutions of higher education. We relate to them clarification of the content of the concept of «labour protection competence» taking into account the peculiarities of the professional activity of specialists in the machine-building industry, determination of the components of safety competence of specialists of the machine-building industry and its interconnections in the structure of professional competence, determination of peculiarities and tasks of formation of safety competence of specialists in the machinebuilding industry in the system of professional training, ensuring motivation for the development of safety competence of future specialists in the machine-building industry as a necessary condition for professional adaptation and further professional growth, determination of the peculiarities of skills development in safety activities in the process of theoretical and practical training, industrial practice and graduation design, as well as the selection of appropriate pedagogical means for the educational process. Prospects for further research, we see in the development of methodological conditions and ways of developing the safety competence of future specialists in mechanical engineering at all stages of professional training in higher education institutions.

scholarly journals CURRENT STATE AND PROBLEMS OF DEVELOPMENT OF UKRAINIAN MACHINE-BUILDING ENTERPRISES

2021 ◽  
pp. 227-238
Author(s):  
Oksana Khodyrieva
Keyword(s):  
Sustainable Development ◽  
Industrial Development ◽  
Mechanical Engineering ◽  
Machine Building ◽  
The State ◽  
Building Industry ◽  
Industrial Complex ◽  
Current State ◽  
Main Factors ◽  
Building Enterprises

Introduction. As the industrial sector is of key importance for the economy of Ukraine, the indicators of its functioning are the main factor in the social and economic development of the country. In particular, mechanical engineering is one of the basic sectors of Ukraine's economy and a strategically important sector that affects the development of technological potential and competitiveness of Ukraine's economy as a whole. The level of development of mechanical engineering is one of the main factors that allows to ensure sustainable development of the Ukrainian economy, the level of development of the country depends on its level and dynamics of development. Therefore, the study of the current state of the machine-building industry, the efficiency of machine-building enterprises, identification of current problems will identify tools for recovery and further sustainable development of machine-building enterprises as one of the key sectors of the national economy. Purpose. Analyze the state of Ukrainian machine building, identify the main trends and problems of the industrial complex in modern economic conditions and provide recommendations for their solution to ensure sustainable development of machine building enterprises and increase the level of economic potential of industry. Method (methodology). The research was conducted through the analysis and synthesis of data based on the evaluation of statistical data of the State Statistics Service of Ukraine (2010-2019) in order to study the current state of the machine-building industry of Ukraine; tabular and graphical methods for visual presentation of the material. Results. The study confirms the link between economic growth and industrial development. The peculiarities of the conditions of activity of machine - building enterprises are determined. The tendencies of the lag of the Ukrainian industry on level from the developed countries are revealed. The main factors of reduction of production volumes of machine - building branch are analyzed. The analysis of the level of innovative activity of machine - building enterprises is carried out. The main factors hindering innovation are identified. The existing level and structure of capital investments are analyzed. The main destabilizing problems of the machine-building industry in Ukraine are outlined. A conclusion is made and a number of measures aimed at creating conditions for sustainable development of the machine-building industry taking into account the potential and capabilities of machine-building enterprises are proposed.

Prospects for the development of the machine-building industry in the context of neo-industrial development of the Russian economy

2020 ◽  
pp. 49-55
Author(s):  
М.К. Измайлов
Keyword(s):  
Industrial Development ◽  
Statistical Data ◽  
Machine Building ◽  
Engineering Industry ◽  
Building Industry ◽  
Industrial Economy ◽  
Basic Industry ◽  
Russian Economy ◽  
Current State ◽  
Promising Development

Статья посвящена исследованию проблем развития машиностроительной отрасли в условиях развития неоиндустриальной экономики России. Обоснована актуальность и важность развития машиностроительной отрасли как базовой отрасли развития всей экономики России. Проведено исследование статистических данных, отражающих современное состояние развития машиностроительной отрасли. Разработана концептуальная модель перспективного развития машиностроительной отрасли в условиях неиндустриального развития экономики России. The article is devoted to the study of the problems of the development of the engineering industry in the conditions of the development of the neo-industrial economy of Russia. The relevance and importance of the development of the engineering industry as the basic industry for the development of the entire Russian economy is justified. A study of statistical data reflecting the current state of development of the engineering industry has been carried out. A conceptual model of the promising development of the machine-building industry in the conditions of the neo-industrial development of the Russian economy has been developed.

The State of Mechanical Engineering in the Modern Russian Economy

2020 ◽  
Vol 12 (4-2) ◽  
pp. 277-290
Author(s):  
Natalia Bozo ◽  
◽  
Ekaterina Malysheva ◽  
Nadezhda Filatyeva ◽  
◽  
...  
Keyword(s):  
Mechanical Engineering ◽  
Full Employment ◽  
Import Substitution ◽  
Geographic Location ◽  
Educational Background ◽  
Machine Building ◽  
Added Value ◽  
High Tech ◽  
Building Industry ◽  
Effective Development

Machine building is a leading industry in advanced countries. It provides many industries with machines and equipment as it is the main link in the system of intersectoral linkages. Innovations in engineering create the basis for increasing production and qualitative changes in the structure of industry, that creates a synergistic effect for the economy as a whole. Thus, it secures full employment for highly skilled employees, promotes the growth of the level of educational background of the population and contributes to the development of the scientific and technological potential of the country. However, underinvestment in innovation technologies and processes, a limited character of the import substitution model and an insufficient support of the export model greatly hinder rapid and effective development of the machine-building industry. Specific peculiarities of the machine building development such as R&D intensity, labor intensity, and the intensity of metal use, the need in cooperation and consumer orientation influence their geographic location. Despite the decline in the number of enterprises and employment in the machine-building industry, the industry’s contribution to the GVA is stable. At the same time, the state’s interest in the development of all sectors with high added value will influence the future of engineering. In statistics innovative activity in mechanical engineering began to be considered relatively recently. The highest rates of innovation are high-tech engineering. The state’s share in supporting innovation in both manufacturing and engineering is increasing. The coefficients of specialization are calculated for all Federal districts and each of the 85 subjects of the Federation for the period from 2007 to 2017. Calculations were carried out for all types of economic activity, according to the classifier of OKVED. The specialization industries for each of the regions are identified. The group of regions where engineering is concentrated is defined. These 19 regions did not change their industry of specialization during the analyzed period from 2008 to 2017.

scholarly journals Methodology of teaching bachelors of "Management in the business of design" in the discipline of "Basics of design in Fashion", demonstrated on the example of a project assignment on researching brands: "FASHION DNА".

2021 ◽  
Author(s):  
Varvara Vladimirovna Andreeva
Keyword(s):  
Creative Process ◽  
Business Education ◽  
Design Education ◽  
Professional Training ◽  
Fashion Industry ◽  
Design Project ◽  
Analytical Process ◽  
Project Method ◽  
Definition Of ◽  
Different Levels

The article discusses the principles of interdisciplinary relations required to train the students of "Management in business of design", who specialize in the fashion industry. A description of a tested methodology of a design project on research and definition of the "DNA of fashion brands" is provided. The article substantiates the application of the project method in business education and design education, which has established itself as effective in training future specialists at different levels of professional training. This method provides the opportunity to integrate students into the creative process and motivate them to solve unconventional problems. Working on this project in a group allows students to acquire teamwork skills and get acquainted with the functioning of global manufacturers of clothing and accessories. The result of the project is a presentation in which all stages of research, analytical process.

scholarly journals PECULIARITIES OF THE CONTENT OF PRIMARY SCHOOL TEACHER PROFESSIONAL TRAINING TO WORKING IN MULTILINGUAL ENVIRONMENT IN UKRAINE AND FLANDERS (BELGIUM)

2019 ◽  
pp. 241-258
Author(s):  
Tetiana Holovatenko
Keyword(s):  
Teacher Training ◽  
Primary School ◽  
Professional Training ◽  
School Teacher ◽  
Foreign Languages ◽  
Primary School Teacher ◽  
Teaching Methodology ◽  
Practical Training ◽  
Competency Based ◽  
Interdisciplinary Integration

The article provides a comparative analysis of future primary school teacher training programs to working in a multilingual environment on the example of Artesis Plantijn Hogeschool Antwerpen and Borys Grinchenko Kyiv University. General tendencies in teacher training at the level of content and methodological support are highlighted and systematized. They are the duration of general pedagogical training, competency-based training, interactive learning, individualization of the professional trajectory of the future teacher, interdisciplinary integration at the level of the educational program, the study of foreign languages and teaching methodology. A significant importance before the enrollment to a Hogeschool in Flanders is given to a placement test enabling various types of further individualization of the professional training. In Ukraine individualization is applied after the institutional screening test. As evidenced by a curriculum analysis in both Flanders and Ukraine, study time of general pedagogical subjects is the same. A competency-based approach goes through the entire curriculum up to practical training which occupies a major place in the teacher training process. Teacher training to working in a multilingual environment takes place while learning foreign languages, teaching methodology, and studying socio-cultural modules/subjects. This approach is ensured through interdisciplinary integration within the curriculum. For instance, in Flanders students are offered a multilingual subject program, built as a language maintenance program type A (according to J. Cenoz) in both Dutch and French. In Ukraine students are offered an integrated course of English and teaching methodology. According to the results of our research, multilingual content of teacher training is more developed in Flanders. Therefore, further research of primary school teacher training to working in the multilingual environment in Wallonia and Brussels is needed

Sign in / Sign up

Export Citation Format

Share Document