SPREAD AND HARMFULNESS OF THE THRIPS TABACI LIND IN APPLE PLANTATIONS OF THE KRASNODAR TERRITORY

2021 ◽  
Vol 66 (1) ◽  
pp. 82-88
Author(s):  
M. E. Podgornaya ◽  
S. V. Prakh ◽  
A. V. Vasilchenko
Keyword(s):  
High Temperatures ◽  
Growing Season ◽  
Thrips Tabaci ◽  
Relative Air Humidity ◽  
Tobacco Thrips ◽  
Fruit Damage ◽  
High Degree ◽  
Intensive Development ◽  
Fruit Plantations

The results of daily phytosanitary monitoring of fruit plantations and literature data on biology, ecology, harmfulness of tobacco thrips (Thrips tabaci Lind.) are presented. In the apple agrocenoses of the Kuban and Black Sea zones of Krasnodar Territory, an increase in the harmfulness of representatives of the order Thysanoptera is observed. An increase in the number of tobacco thrips was noted, which led to a decrease in the quality of fruits. In the growing season of 2018, isolated symptoms of fruit damage by phytophagous were noted, in the growing season of 2019, fruit damage reached up to 2 %, in 2020 — 5-30 %. It was revealed that during the flowering period the number of T. tabaci Lind was 1-2 specimens per inflorescence; at the end of flowering, the amount of the pest increased by 5 times. High temperatures and lack of precipitation led to an outbreak of the pest population; in the first decade of June, 15 to 40 individuals were fixed per leaf. A high degree of damage to the tops of shoots, leaves and fruits was observed, the tissue in the feeding places of the pest was deformed, discolored, acquiring the appearance of whitish spots, which grew during the growth and ripening of fruits. It is known that the intensive development of thrips takes place in dry and hot years; the optimum temperature for the development of T. tabaci Lind is +25 °C. As a result of our monitoring, it was revealed that the maximum amount of the pest was observed during the period when high temperatures and low relative air humidity were noted — June and early July. The greatest number of the pest was found in areas bordering the fields of grain and tilled crops, while the number of phytophages at the time of registration reached 45 individuals per leaf and more. It should be noted that when the air temperature rises above +35 °C, the development of the phytophage stops, and the mortality rate of all stages sharply increases. To ensure a stable phytosanitary situation in fruit agrocenoses and prevent loss of fruit quality from damage by thrips, it is necessary to develop a set of measures to control the number of pests.

scholarly journals Thrips are dangerous pests of vegetable crops

2019 ◽  
pp. 5-10
Author(s):  
Y. Klechkovskiy ◽  
S. Glushkova ◽  
O. Palagina
Keyword(s):  
Natural Enemies ◽  
Growing Season ◽  
Biological Agents ◽  
Southern Region ◽  
Thrips Tabaci ◽  
Vegetable Crops ◽  
Natural Conditions ◽  
Wide Range ◽  
Tobacco Thrips ◽  
Phytosanitary Measures

Goal. To provide information about dangerous pests of vegetable crops — thrips. To describe the morphology and biology of the pest, the methods of spreading and harmfulness, provide information on the necessary phytosanitary measures to restrict its development and reduce the harmfulness, and to justify the need to use alternative biological methods to control the population of thrips in the conditions of the Southern steppe of Ukraine on an example of the most common of them — tobacco thrips (Thrips tabaci Lind.). Methods. Informational and analytical. The collection of information was carried out in accessible specialized literature and the Internet. Results. The information about sucking pests of vegetable crops - thrips is given.  Thrips are known for a long time, they belong to wide polyphages, that is they harm a wide range of cultural and wild plants  (from 100 to 400 spesies). On an example of the most common of them — tobacco thrips (Thrips tabaci Lind.) there is given information about the morphology and biology of the pest, the methods of its spreading and harmfulness, as well as the information on the necessary phytosanitary measures for restriction its development and reduction of the harm. This most widespread and dangerous polyphage, due to its close connection with plants, where its entire life cycle develops - from eggs to imago, has inhabited almost all greenhouses. In the natural conditions of the southern region of Ukraine, the tobacco thrips were found on large areas of vegetable crops with the seedling method of their cultivation, mainly cucumbers, tomatoes, onions, cabbage, watermelons, and the like. It harms bulbs in vegetable stores, which leads to a deterioration in the quality of garden plants and gardening material. The reaction of the plant to the damage by the trips is desensitization, which is manifested in growth retardation, distortion and loss of turgor of damaged leaves, which later become yellow and dries. Imago winter, mostly females, in greenhouses - in different slits, and in open ground - in the upper layer of soil at a depth of 7-10 cm, under plant remains or in the rootstock of perennials or weeds. At temperatures below 0 ° С and in the absence of snow cover, insects die. The pest spreads at all stages of development - eggs, larvae, imago - with planting material of vegetable crops (with plants or in soil), transport, containers, workers' tools, their clothes or footwear. This also occurs when collecting, packing and selling contaminated products. This is especially true for cabbage, with which the thrips can get to the greenhouse or indoor plants. In the conditions of the steppe and forest-steppe zones of Ukraine, the tobacco thrips can develop in open soil at temperatures over 10 ° C during the growing season from the second decade of May to the end of September, causing significant damage to vegetable crops. If this is the case, the pest can give 3-4 to 5-6 generations, depending on the weather conditions. In the population control of tobacco thrips, satisfactory results are received by systematic cultivation of plants with the following insecticides: Akketlik, Aktar, Phyitoverm, Karate Zeon, Confidor Maxi (with irrigation water) and others. It is obligatory to change preparations during the growing season. On the onion fields thrips is successfully reduced with insecticide of natural origin Spintor when using periodic spraying of plants. Because thrips are very resistant pests, therefore, in addition to insecticides, the use of predatory mites Amblyseius cucumeris, A. barken, A. derenerans, as well as predators of Orius laevigatus, O. magusaculus can be used to destroy them. Taking into account that nowadays the protection of vegetable crops takes the direction for the use of biological agents against pests - polyphages, special attention should be paid to the use of natural enemies of the tobacco thrips. Conclusions. In the natural conditions of the southern region of Ukraine, tobacco thrips were found on large areas of vegetable crops, therefore, there are all reasons for phytosanitary surveys of open-air vegetable crops to detect and eliminate this dangerous pest. Taking into account that nowadays the protection of vegetable crops takes the direction for the use of biological agents against pests - polyphages, special attention should be paid to the use of natural enemies of the tobacco thrips.

Automation of selected brazes' dynamic properties in high-temperatures' measurement process

2013 ◽  
Vol 18 (2-3) ◽  
pp. 33-41
Author(s):  
Dominik Sankowski ◽  
Marcin Bakala ◽  
Rafał Wojciechowski
Keyword(s):  
Surface Tension ◽  
High Temperatures ◽  
Dynamic Properties ◽  
Automatic Measurement ◽  
Measurement Methodology ◽  
Joining Process ◽  
Wetting Force ◽  
Research Grant

Abstract The good quality of several manufactured components frequently depends on solidliquid interactions existing during processing. Nowadays, the research in material engineering focuses also on modern, automatic measurement methods of joining process properties, i.a. wetting force and surface tension, which allows for quantitative determination of above mentioned parameters. In the paper, the brazes’ dynamic properties in high-temperatures’ measurement methodology and the stand for automatic determination of braze’s properties, constructed and implmented within the research grant nr KBN N N519 441 839 - An integrated platform for automatic measurement of wettability and surface tension of solders at high temperatures, are widely described

Агрономическая эффективность промышленной (голландской) технологии возделывания картофеля

2018 ◽  
Author(s):  
C. Coy ◽  
A.V. Shuravilin ◽  
O.A. Zakharova
Keyword(s):  
Heavy Metals ◽  
Regression Analysis ◽  
Positive Response ◽  
Growth Yield ◽  
Correlation And Regression Analysis ◽  
Yield And Quality ◽  
Quality Of Products ◽  
High Degree ◽  
The Impact

Приведены результаты исследований по изучению влияния промышленной технологии возделывания картофеля на развитие, урожайность и качество продукции. Выявлена положительная реакция растений на подкормку K2SO4 в период посадки. Корреляционно-регрессионный анализ урожайности и качества клубней выявил высокую степень достоверности результатов опыта. Содержание нитратов и тяжелых металлов в клубнях было ниже допустимых величин.The results of studies on the impact of industrial technology of potato cultivation on growth, yield and quality of products. There was a positive response of plants to fertilizer K2SO4 in the period of planting. Correlation and regression analysis of yield and quality of tubers revealed a high degree of reliability of the results of experience. The contents of nitrates and heavy metals in tubers was below the permissible values.

Improvement of separate elements of the techno-logy of cultivation of white cabbage in the conditions of the of the central region of the non-chernozem zone

2020 ◽  
Author(s):  
A.V. Konstantinovich ◽  
◽  
A.S. Kuracheva ◽  
E.D. Binkevich
Keyword(s):  
Seed Treatment ◽  
Unit Area ◽  
Growing Season ◽  
Agricultural Products ◽  
Stress Factors ◽  
High Quality ◽  
Temperature And Precipitation ◽  
White Cabbage ◽  
Sowing Seed

In conditions of climate change, when temperature and precipitation fluctuations occur more and more frequently during the growing season, it is necessary to obtain high quality seedlings with "immunity" to various stress factors, including high weediness, the damage from which is associated with a decrease in yield (by 25 -35%) and with a deterioration in the quality of agricultural products. Due to the imbalance in production technology, seedlings are often weakened, overgrown, with a low yield per unit area and survival rate in the field. One of the solutions to this problem is the use of PP for pre-sowing seed treatment to increase the competitiveness of seedlings in the field.

Current Progress in Biomedical Applications of Chitosan-Carbon Nanotube Nanocomposites: A Review

2020 ◽  
Vol 20 (16) ◽  
pp. 1619-1632
Author(s):  
Katarzyna Pieklarz ◽  
Michał Tylman ◽  
Zofia Modrzejewska
Keyword(s):  
Carbon Nanotube ◽  
Medical Science ◽  
Antimicrobial Properties ◽  
Polymer Materials ◽  
Biological Macromolecules ◽  
Medical Sciences ◽  
New Generation ◽  
High Degree ◽  
Dressing Materials

The currently observed development of medical science results from the constant search for innovative solutions to improve the health and quality of life of patients. Particular attention is focused on the design of a new generation of materials with a high degree of biocompatibility and tolerance towards the immune system. In addition, apart from biotolerance, it is important to ensure appropriate mechanical and technological properties of materials intended for intra-body applications. Knowledge of the above parameters becomes the basis for considerations related to the possibilities of choosing the appropriate polymer materials. The researchers' interest, as evidenced by the number of available publications, is attracted by nanobiocomposites based on chitosan and carbon nanotubes, which, due to their properties, enable integration with the tissues of the human body. Nanosystems can be used in many areas of medicine. They constitute an excellent base for use as dressing materials, as they exhibit antimicrobial properties. In addition, they can be carriers of drugs and biological macromolecules and can be used in gene therapy, tissue engineering, and construction of biosensors. For this reason, potential application areas of chitosan-carbon nanotube nanocomposites in medical sciences are presented in this publication, considering the characteristics of the system components.

scholarly journals The Neural Basis of Vivid Memory Is Patterned on Perception

2012 ◽  
Vol 24 (9) ◽  
pp. 1867-1883 ◽  
Author(s):  
Bradley R. Buchsbaum ◽  
Sabrina Lemire-Rodger ◽  
Candice Fang ◽  
Hervé Abdi
Keyword(s):  
Brain Activity ◽  
Sensory Perception ◽  
Direct Perception ◽  
Neural Basis ◽  
Activation Patterns ◽  
Short Video ◽  
Initial Perception ◽  
Experiential Quality ◽  
High Degree

When we have a rich and vivid memory for a past experience, it often feels like we are transported back in time to witness once again this event. Indeed, a perfect memory would exactly mimic the experiential quality of direct sensory perception. We used fMRI and multivoxel pattern analysis to map and quantify the similarity between patterns of activation evoked by direct perception of a diverse set of short video clips and the vivid remembering, with closed eyes, of these clips. We found that the patterns of distributed brain activation during vivid memory mimicked the patterns evoked during sensory perception. Using whole-brain patterns of activation evoked by perception of the videos, we were able to accurately classify brain patterns that were elicited when participants tried to vividly recall those same videos. A discriminant analysis of the activation patterns associated with each video revealed a high degree (explaining over 80% of the variance) of shared representational similarity between perception and memory. These results show that complex, multifeatured memory involves a partial reinstatement of the whole pattern of brain activity that is evoked during initial perception of the stimulus.

scholarly journals Measuring spatial price differentials at the basic heading level: a comparison of stochastic index number methods

2021 ◽  
Author(s):  
Sebastian Weinand
Keyword(s):  
Price Level ◽  
Consumer Price Index ◽  
Index Number ◽  
Price Data ◽  
Estimation Efficiency ◽  
Spatial Price ◽  
Price Comparisons ◽  
High Degree ◽  
The Impact

AbstractSpatial price comparisons rely to a high degree on the quality of the underlying price data that are collected within or across countries. Below the basic heading level, these price data often exhibit large gaps. Therefore, stochastic index number methods like the Country–Product–Dummy (CPD) method and the Gini–Eltetö–Köves–Szulc (GEKS) method are utilised for the aggregation of the price data into higher-level indices. Although the two index number methods produce differing price level estimates when prices are missing, the present paper demonstrates that both can be derived from exactly the same stochastic model. For a specific case of missing prices, it is shown that the formula underlying these price level estimates differs between the two methods only in weighting. The impact of missing prices on the efficiency of the price level estimates is analysed in two simulation studies. It can be shown that the CPD method slightly outperforms the GEKS method. Using micro data of Germany’s Consumer Price Index, it can be observed that more narrowly defined products improve estimation efficiency.

Kaolin impacts on hormonal balance, polyphenolic composition and oenological parameters in red grapevine berries during ripening

2021 ◽  
pp. 1-15
Author(s):  
Sara Bernardo ◽  
Lia-Tânia Dinis ◽  
Nelson Machado ◽  
Ana Barros ◽  
Marta Pitarch-Bielsa ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Growing Season ◽  
Growing Seasons ◽  
Polyphenolic Composition ◽  
Berry Ripening ◽  
Hormonal Balance ◽  
Summer Stress ◽  
Fruit Damage ◽  
Stress Signals

BACKGROUND: Kaolin particle-film application is a well-known strategy to avoid fruit damage. However, its putative role in balancing berry ripening under a changing climate remains poorly explored. OBJECTIVE: We assessed kaolin treatment effect on several ripening berry components, hormonal balance and oenological parameters of the field-grown Touriga-Franca (TF) and Touriga–Nacional (TN) grapevine varieties at veraison (EL35) and ripening (EL38) during two growing seasons (2017 and 2018). RESULTS: Under the adverse summer conditions (two heatwave events) of 2017, kaolin application increased 211.2 %and 51.4 %the salicylic acid (SA) and abscisic acid (ABA) levels in TF berries at EL38, while no significant differences were observed in TN. Conversely, TF, and TN kaolin treated berries showed lower SA and ABA accumulation in 2018, respectively. Tartaric acid content increased about 17.2 %, and 24.2 %in TF and TN treated berries at stage EL35 in the 2017 growing season. Though kaolin treatment had no consistent effect on anthocyanins accumulation, flavonoids, ortho-diphenols and tannins increased in kaolin treated grapevines in 2017. CONCLUSIONS: This study highlights the key role of climate in triggering ripening related processes and fruit quality potential. Nevertheless, kaolin treated grapevines displayed an improved response to oxidative stress signals by increasing secondary metabolites accumulation in warm vintages. Kaolin application promoted different varietal responses, with a possible ripening delaying effect in TF, reinforcing its efficiency in alleviating severe summer stress impacts.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

Sign in / Sign up

Export Citation Format

Share Document