Morphological characteristics of meristem potato plants (Solanum tuberosum) under various LED light sources

2021 ◽  
Vol 22 (4) ◽  
Plant Disease ◽  
2021 ◽  
Author(s):  
Lingxiao Cui ◽  
Chengde Yang ◽  
Liping Yang ◽  
Mengjun Jin ◽  
Lijuan Wei

Potato (Solanum tuberosum) is one of the most economically important crops in China, containing carbohydrates, protein, fiber, numerous vitamins and minerals, and is a heart healthy food (Raidl, 2020). Potato infected by Fusarium spp. exhibits quality and yield decline, and even death. In infected plants, the upper leaves exhibit chlorosis, the lower leaves wither and the vascular bundles of stems and tubers turn yellow, and then tan to brown. In August 2018, symptomatic potato stems and roots were collected from Zhangye city, Gansu province, China. Diseased stem tissues were surface sterilized with 75% alcohol for 30 s, and then rinsed in sterile water. The tissue pieces were placed on potato dextrose agar (PDA) and incubated at 25°C in darkness. Fusarium-like colonies were consistently isolated and three monoconidial isolates were obtained. Isolate 3SMJ-2 was selected as a representative for morphological characterization, molecular analysis, and pathogenicity tests. 3SMJ-2 was inoculated in PDA liquid medium, grown on a shaker for 7 days at 25℃ to obtain a mix suspension of hypha fragments and spores (107 spores/mL). Healthy potato plants, named “Xin Daping” and were planted in pots (17 cm diameter by 12 cm) filled with 2L of sterile soil per pot. After 8 weeks, the plants were inoculated with the inoculum or distilled water. Then they were incubated in growth chambers at 25°C under a 12-h/12-h day/night potato period with 90% relative humidity for 24 h. For each treatment, 3 pots were inoculated. After 50 days, 100% of the inoculated potato plants exhibited wilt symptoms similar to those in the field but the control plants were symptomless. A Fusarium identical to strain 3SMJ-2 was re-isolated from symptomatic potato plants to fulfilling Koch’s postulates. Morphological characteristics of the re-isolated strain were identical to the original isolate, which confirmed pathogenicity of strain 3SMJ-2 originally isolated from the potatoes. Colonies of 3SMJ-2 were white with short conidiophores, a few microconidia and sickle-shaped macroconidia (25.2 to 42.9× 3.1 to 4.6 µm) (n = 60) with 4~7 septa, and mostly 5 septa, after cultivated on PDA in an incubator at 25℃ for 14 days. Spherical terminal or intercalary chlamydospores were observed on the mycelium. Strain 3SMJ-2 was identified preliminarily as Fusarium sp. based on morphological characteristics (Leslie et al., 2006). Genomic DNA was extracted from 3SMJ-2 using the OMEGA Fungal DNA kit according to the manufacturer’s protocol. The internal transcribed spacer (ITS), translation elongation factor 1-alpha (TEF) and RNA polymerase II second largest subunit (RPB2) were amplified using ITS1/ITS4 (White et al., 1990), Ef728M/Tef1R (Stępień et al., 2012) and 5F2 /7cR (O'Donnell et al., 2007), respectively. After sequencing by Beijing TSINGKE Biological Technology Co., Ltd., 3 fragments of approximately 519 bp, 587 bp and 1059 bp from the strain 3SMJ-2 were deposited in GenBank as MN420681, MW561963 and MW561964. The ITS, TEF and RPB2 sequences were 100%, 100% and 99.8% identical to those of F.equiseti (KY365589, KF499577, and MH582110). Based on the pathogenicity tests, morphological characteristics and molecular analyses, we identified the strain 3SMJ-2 as F. equiseti, the pathogen causing Fusarium wilt on potato in Zhangye City. Although, F. equiseti has been reported to cause root rot of cowpea (Li et al., 2017) and sugar beet (Cao et al., 2018) in China. To our knowledge, this is the first report confirming F. equiseti causing potato wilt in China. Potato is an economically important crop in Gansu and the occurrence of the new disease caused by F. equiseti on potato needs to be properly managed to reduce yield loss.


Author(s):  
Olga Nakonechnaya ◽  
Irina Gafitskaya ◽  
Ola Grishchenko ◽  
Yuri Kulchin ◽  
Victor Bulgakov ◽  
...  

2019 ◽  
pp. 75-85
Author(s):  
Canan Perdahci ◽  
Hamdi Ozkan

Turkey is rich in terms of renewable energy sources and, therefore, is now encouraging the use of sustainable clean lighting systems in road applications. High pressure sodium lamp is the most widely used type in main roads, but other types of lamps such as mercury vapour lamps or metal halide lamps can be utilized for street lighting. Since it enables energy and money saving, LED light technology has replaced high pressure sodium lamps nowadays. Once solar power system (PV) is integrated with LED lamp for street lighting, the amount of saving and local impact might be enriched. LEDs used as light sources in road lighting luminaires with rising lumen values, decreasing junction temperature, higher colour rendering efficiency, longer lifetime have become more efficient than many light sources with the latest developments. Since the structure of the luminaires in which the LED light sources are used differs from that of the conventional light sources, the optical, thermal and electrical design of the LED luminaires must be considered differently. Thus, this study concentrates upon design considerations and the operating principle of solarpowered LED road lighting luminaire in details. Also, a simple solar panel system was designed and the economical values obtained at the end of 20 years were compared when using the ongrid system and the off-grid system.


2019 ◽  
Vol 9 (2) ◽  
pp. 91
Author(s):  
Ghea Dotulong ◽  
Stella Umboh ◽  
Johanis Pelealu

Uji Toksisitas Beberapa Fungisida Nabati terhadap Penyakit Layu Fusarium (Fusarium oxysporum) pada Tanaman Kentang (Solanum tuberosum L.) secara In Vitro (Toxicity Test of several Biofungicides in controlling Fusarium wilt (Fusarium oxysporum) in Potato Plants (Solanum tuberosum L.) by In Vitro) Ghea Dotulong1*), Stella Umboh1), Johanis Pelealu1), 1) Program Studi Biologi, FMIPA Universitas Sam Ratulangi, Manado 95115*Email korespondensi: [email protected] Diterima 9 Juli 2019, diterima untuk dipublikasi 10 Agustus 2019 Abstrak Tanaman kentang (Solanum tuberosum L.) adalah salah satu tanaman hortikultura yang sering mengalami penurunan dari segi produksi dan produktivitasnya, akibat adanya serangan penyakit layu yang salah satunya disebabkan oleh Fusarium oxysporum. Tujuan penelitian ini adalah mengidentifikasi toksisitas beberapa fungisida nabati dalam mengendalikan penyakit Layu Fusarium (F. oxysporum) pada tanaman kentang (Solanum tuberosum L.) secara In Vitro. Metode Penelitian yang digunakan yaitu metode umpan beracun. Data dianalisis dengan Rancangan Acak Lengkap (RAL) dengan Analisis Varian (ANAVA) yang dilanjutkan dengan menggunakan metode BNT (Beda Nyata Terkecil). Hasil Penelitian, diperoleh nilai toksisitas fungisida nabati tertinggi yaitu pada ekstrak daun sirsak dengan nilai HR (69,44%), kategori berpengaruh, ditandai dengan diameter koloni 2,75 cm (100ppm) dan yang terendah toksisitasnya yaitu pada ekstrak daun jeruk purut dengan nilai HR (49,81%), kategori cukup berpengaruh ditandai dengan diameter koloni 3,75 cm (25ppm). Semakin tinggi konsentrasi yang diujikan maka semakin tinggi toksisitas dari fungisida nabati yang diberikan.Kata Kunci: fungisida nabati, Fusarium oxysporum, tanaman kentang, In Vitro Abstract Potato plants (Solanum tuberosum L.) is one of the horticulture plants which often decreases in terms of production and productivity, due to the attack of wilt, one of which is caused by Fusarium oxysporum. The purpose of this study was to determine the toxicity of several biofungicides in controlling Fusarium wilt (F. oxysporum) in potato plants (Solanum tuberosum L.) in Vitro. The research method used was the In Vitro method with the poison bait method. Data were analyzed by Completely Randomized Design with Variant Analysis (ANAVA), followed by the BNT method. The results showed that the highest biofungicide toxicity value was soursop leaf extract with HR values (69.44%), influential categories, characterized by colony diameter 2.75 cm (100ppm) and the lowest toxicity, namely in kaffir lime leaf extract with a value of HR (49.81%), quite influential category was characterized by colony diameter of 3.75 cm (25ppm). The higher the concentration tested, the higher the toxicity of the biofungicide given.Keywords: biofungicides, Fusarium oxysporum, Potato Plants, In Vitro.


2021 ◽  
Vol 11 (9) ◽  
pp. 4035
Author(s):  
Jinsheon Kim ◽  
Jeungmo Kang ◽  
Woojin Jang

In the case of light-emitting diode (LED) seaport luminaires, they should be designed in consideration of glare, average illuminance, and overall uniformity. Although it is possible to implement light distribution through auxiliary devices such as reflectors, it means increasing the weight and size of the luminaire, which reduces the feasibility. Considering the special environment of seaport luminaires, which are installed at a height of 30 m or more, it is necessary to reduce the weight of the device, facilitate replacement, and secure a light source with a long life. In this paper, an optimized lens design was investigated to provide uniform light distribution to meet the requirement in the seaport lighting application. Four types of lens were designed and fabricated to verify the uniform light distribution requirement for the seaport lighting application. Using numerical analysis, we optimized the lens that provides the required minimum overall uniformity for the seaport lighting application. A theoretical analysis for the heatsink structure and shape were conducted to reduce the heat from the high-power LED light sources up to 250 W. As a result of these analyses on the heat dissipation characteristics of the high-power LED light source used in the LED seaport luminaire, the heatsink with hexagonal-shape fins shows the best heat dissipation effect. Finally, a prototype LED seaport luminaire with an optimized lens and heat sink was fabricated and tested in a real seaport environment. The light distribution characteristics of this prototype LED seaport luminaire were compared with a commercial high-pressure sodium luminaire and metal halide luminaire.


2021 ◽  
Vol 22 (3) ◽  
pp. 1455
Author(s):  
Varsha Garg ◽  
Aleksandra Hackel ◽  
Christina Kühn

In potato plants, the phloem-mobile miR172 is involved in the sugar-dependent transmission of flower and tuber inducing signal transduction pathways and a clear link between solute transport and the induction of flowering and tuberization was demonstrated. The sucrose transporter StSUT4 seems to play an important role in the photoperiod-dependent triggering of both developmental processes, flowering and tuberization, and the phenotype of StSUT4-inhibited potato plants is reminiscent to miR172 overexpressing plants. The first aim of this study was the determination of the level of miR172 in sink and source leaves of StSUT4-silenced as well as StSUT4-overexpressing plants in comparison to Solanum tuberosum ssp. Andigena wild type plants. The second aim was to investigate the effect of sugars on the level of miRNA172 in whole cut leaves, as well as in whole in vitro plantlets that were supplemented with exogenous sugars. Experiments clearly show a sucrose-dependent induction of the level of mature miR172 in short time as well as long time experiments. A sucrose-dependent accumulation of miR172 was also measured in mature leaves of StSUT4-silenced plants where sucrose export is delayed and sucrose accumulates at the end of the light period.


Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1089 ◽  
Author(s):  
Sara Raggiunto ◽  
Alberto Belli ◽  
Lorenzo Palma ◽  
Piergiovanni Ceregioli ◽  
Massimo Gattari ◽  
...  

Digital LED drivers capable of blending the spectrum of two LED fixtures with different Correlated Color Temperatures through the LEDs’ power supply control are widespread. However, the digital control of lighting systems is possible only after a careful study of the LED’s response, in terms of illuminance and Correlated Color Temperature. The proposed work takes advantage of the Tunable White technology for the realization of an efficient method for LED light source characterization. In order to evaluate how the light changes as a function of the electric power supplied by the LED drivers, an experimental setup to characterize LED light sources has been designed. Starting from the data acquired from the experimental setup, a model for dimming the LED driver and obtaining the desired values of quality of light has been developed. The proposed model is based on the least squares method and its accuracy is evaluated by comparing the obtained values of illuminance and Correlated Color Temperature with those measured by an illuminance spectrophotometer. Results achieved an error of 0.3% for Correlated Color Temperature and 1.5% for illuminance using the proposed approximation functions.


Sign in / Sign up

Export Citation Format

Share Document