scholarly journals Movement Studies on a Hanging Glacier in Relation with an Ice Avalanche

1977 ◽  
Vol 19 (81) ◽  
pp. 671-672 ◽  
Author(s):  
André Flotron
Keyword(s):  
Flow Pattern ◽  
The State ◽  
Least Square ◽  
Velocity Versus ◽  
Surface Part ◽  
Different Types ◽  
Best Fit ◽  
Ice Avalanche

AbstractIn 1972 the state of a hanging glacier on the Weisshorn gave cause for alarm, as part of it seemed to be accelerating and a repetition of an earlier avalanche of ice seemed possible (see Röthlisberger, previous abstract). For this reason movement surveys were undertaken. The various surveying methods applied on the Weisshorn are outlined and the accuracy of the measurements is given. By least-square analysis different types of curves have been fitted to the data for velocity versus time. The best fit obtained so-far has been with hyperbolae. The confidence of extrapolations from such curves is discussed in relation to forecasts. By evaluating repeated photographs taken by an automatic camera from a single position, using a stereo plotter, the flow pattern has been established at the surface, part of the front, and one of the lateral faces of the ice mass. Changes with time caused by the deformation of the ice mass, the formation of crevasses and the crumbling away of the ice at the edge have been observed.

scholarly journals Movement Studies on a Hanging Glacier in Relation with an Ice Avalanche

1977 ◽  
Vol 19 (81) ◽  
pp. 671-672 ◽  
Author(s):  
André Flotron
Keyword(s):  
Flow Pattern ◽  
The State ◽  
Least Square ◽  
Velocity Versus ◽  
Surface Part ◽  
Different Types ◽  
Best Fit ◽  
Ice Avalanche

Abstract In 1972 the state of a hanging glacier on the Weisshorn gave cause for alarm, as part of it seemed to be accelerating and a repetition of an earlier avalanche of ice seemed possible (see Röthlisberger, previous abstract). For this reason movement surveys were undertaken. The various surveying methods applied on the Weisshorn are outlined and the accuracy of the measurements is given. By least-square analysis different types of curves have been fitted to the data for velocity versus time. The best fit obtained so-far has been with hyperbolae. The confidence of extrapolations from such curves is discussed in relation to forecasts. By evaluating repeated photographs taken by an automatic camera from a single position, using a stereo plotter, the flow pattern has been established at the surface, part of the front, and one of the lateral faces of the ice mass. Changes with time caused by the deformation of the ice mass, the formation of crevasses and the crumbling away of the ice at the edge have been observed.

Direct Assessment of Effective Renal Plasma Flow from Renoscintigraphy with a Gamma Camera and an On-Line Computer

1981 ◽  
Vol 20 (06) ◽  
pp. 274-278
Author(s):  
J. Liniecki ◽  
J. Bialobrzeski ◽  
Ewa Mlodkowska ◽  
M. J. Surma
Keyword(s):  
Count Rate ◽  
Renal Plasma Flow ◽  
Early Period ◽  
Least Square Method ◽  
Least Square ◽  
Uptake Coefficient ◽  
Positive Linear Correlation ◽  
On Line ◽  
Best Fit ◽  
Plasma Activity

A concept of a kidney uptake coefficient (UC) of 131I-o-hippurate was developed by analogy from the corresponding kidney clearance of blood plasma in the early period after injection of the hippurate. The UC for each kidney was defined as the count-rate over its ROI at a time shorter than the peak in the renoscintigraphic curve divided by the integral of the count-rate curve over the "blood"-ROI. A procedure for normalization of both curves against each other was also developed. The total kidney clearance of the hippurate was determined from the function of plasma activity concentration vs. time after a single injection; the determinations were made at 5, 10, 15, 20, 30, 45, 60, 75 and 90 min after intravenous administration of 131I-o-hippurate and the best-fit curve was obtained by means of the least-square method. When the UC was related to the absolute value of the clearance a positive linear correlation was found (r = 0.922, ρ > 0.99). Using this regression equation the clearance could be estimated in reverse from the uptake coefficient calculated solely on the basis of the renoscintigraphic curves without blood sampling. The errors of the estimate are compatible with the requirement of a fast appraisal of renal function for purposes of clinical diagknosis.

The Analysis of Urban Road Traffic State Based on Kinds Floating Car Data

2014 ◽  
Vol 694 ◽  
pp. 80-84
Author(s):  
Xiao Tong Yin ◽  
Chao Qun Ma ◽  
Liang Peng Qu
Keyword(s):  
Road Traffic ◽  
Velocity Estimation ◽  
Least Square ◽  
Single Type ◽  
Estimation Model ◽  
Average Speed ◽  
Urban Road ◽  
Traffic State ◽  
Floating Car Data ◽  
Different Types

The analysis of the unban road traffic state based on kinds of floating car data, is based on the model and algorithm of floating car data preprocessing and map matching, etc. Firstly, according to the characteristics of the different types of urban road, the urban road section division has been carried on the elaboration and optimization. And this paper introduces the method of calculating the section average speed with single floating car data, also applies the dynamic consolidation of sections to estimate the section average velocity.Then the minimum sample size of floating car data is studied, and section average velocity estimation model based on single type of floating car data in the different case of floating car data sample sizes has been built. Finally, the section average speed of floating car in different types is fitted to the section average car speed by the least square method, using section average speed as the judgment standard, the grade division standard of urban road traffic state is established to obtain the information of road traffic state.

scholarly journals Unraveling the fine-tuned lemon coloration of a pierid butterfly Catopsilia pomona

Microscopy ◽  
2017 ◽  
Vol 66 (6) ◽  
pp. 414-423
Author(s):  
Monalisa Mishra ◽  
Ashutosh Choudhury ◽  
P Sagar Achary ◽  
Harekrushna Sahoo
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Variable Temperature ◽  
Wing Pattern ◽  
Physical Composition ◽  
Different Types ◽  
Microscopy Techniques ◽  
Pierid Butterfly ◽  
Best Fit ◽  
Scanning Electron

Abstract Butterflies wings possess different types of scales to perform diverse functions. Each scale has many nano and microstructures, which interferes with light, resulting in unique coloration for each butterfly. Besides coloration, the arrangement of scales further helps in giving better survivability. Thus, analysis of wing pattern provides an overall idea about adaptation and activity of the animal. The current study deciphers the structure and composition of a wing of a pierid butterfly Catopsilia pomona, which remains active at 42°C at which temperature all other butterflies face a tougher task for existence. In order to know the relation between survivability and adaptation in the wing, we have investigated the structural and physical composition of the wing of C. pomona under optical spectroscopy (absorption, reflectance and transmittance) along with microscopy techniques (optical and scanning electron microscopy), which are not described in earlier studies. The current findings reveal unique structural arrangement within scales to provide the best fit to the animal in variable temperature.

Fitting Weibull Strength Data and Applying It to Stochastic Mechanical Design

1992 ◽  
Vol 114 (1) ◽  
pp. 35-41 ◽  
Author(s):  
C. R. Mischke
Keyword(s):  
Mechanical Design ◽  
Least Square ◽  
Stochastic Methods ◽  
Coordinate Transformations ◽  
Strength Data ◽  
The Third ◽  
Tension Tests ◽  
Property Data ◽  
Simple Tension ◽  
Best Fit

This is the second paper in a series relating to stochastic methods in mechanical design. The first is entitled, “Some Property Data and Corresponding Weibull Parameters for Stochastic Mechanical Design,” and the third, “Some Stochastic Mechanical Design Applications.” When data are sparse, many investigators prefer employing coordinate transformations to rectify the data string, and a least-square regression to seek the best fit. Such an approach introduces some bias, which the method presented here is intended to reduce. With mass-produced products, extensive testing can be carried out and prototypes built and evaluated. When production is small, material testing may be limited to simple tension tests or perhaps none at all. How should a designer proceed in order to achieve a reliability goal or to assess a design to see if the goal has been realized? The purpose of this paper is to show how sparse strength data can be reduced to distributional parameters with less bias and how such information can be used when designing to a reliability goal.

Atomization of Liquids by Means of a Rotating Cup

1950 ◽  
Vol 17 (2) ◽  
pp. 145-153 ◽  
Author(s):  
J. O. Hinze ◽  
H. Milborn
Keyword(s):  
Working Conditions ◽  
Drop Size ◽  
Film Formation ◽  
Angular Speed ◽  
The State ◽  
Experimental Results ◽  
Drop Formation ◽  
Dimensionless Groups ◽  
Different Types ◽  
Centrifugal Action

Abstract Liquid, supplied through a stationary tube to the inner part of a rotating cup widening toward a brim, flows viscously in a thin layer toward this brim and is then flung off, all by centrifugal action. The flow within this layer and the disintegration phenomena occurring beyond the brim have been studied, experimentally as well as theoretically. A formula has been derived for the thickness and for the radial velocity of the liquid layer within the cup, which proved to agree reasonably well with experimental results. Three essentially different types of disintegration may take place around and beyond the edge of the cup designated, respectively, by: (a) the state of direct drop formation; (b) the state of ligament formation; and (c) the state of film formation. Which one of these is realized depends upon working conditions. Transition from state (a) into (b), or of state (b) into state (c) is promoted by an increased quantity of supply, an increased angular speed, a decreased diameter of the cup, an increased density, an increased viscosity, and a decreased surface tension of the liquid. The experimental results have been expressed in relationships between relevant dimensionless groups. For the state of ligament formation a semiempirical relationship has been derived between the number of ligaments and dimensionless groups determining the working conditions of the cup. Results of drop-size measurements made for the state of ligament formation as well as for the state of film formation show that atomization by mere rotation of the cup is much more uniform than commonly achieved with pressure atomizers.

Comparison of two different types of fractional-order COVID-19 distributed time-delay models with real data application

2021 ◽  
pp. 2150219
Author(s):  
Liangli Yang ◽  
Yongmei Su ◽  
Xinjian Zhuo
Keyword(s):  
Time Delay ◽  
Fractional Order ◽  
Distributed Delay ◽  
Real Data ◽  
Least Square ◽  
Order Model ◽  
The Real ◽  
Fractional Order Model ◽  
Different Types ◽  
Distributed Time Delay

The outbreak of COVID-19 has a great impact on the world. Considering that there are different infection delays among different populations, which can be expressed as distributed delay, and the distributed time-delay is rarely used in fractional-order model to simulate the real data, here we establish two different types of fractional order (Caputo and Caputo–Fabrizio) COVID-19 models with distributed time-delay. Parameters are estimated by the least-square method according to the report data of China and other 12 countries. The results of Caputo and Caputo–Fabrizio model with distributed time-delay and without delay, the integer-order model with distributed delay are compared. These show that the fractional-order model can be better in fitting the real data. Moreover, Caputo order is better in short-term time fitting, Caputo–Fabrizio order is better in long-term fitting and prediction. Finally, the influence of several parameters is simulated in Caputo order model, which further verifies the importance of taking strict quarantine measures and paying close attention to the incubation period population.

Differential Multipliers for Tourism in Victoria

1997 ◽  
Vol 3 (1) ◽  
pp. 57-68 ◽  
Author(s):  
Guy R. West ◽  
Ari Gamage
Keyword(s):  
Economic Impacts ◽  
Value Added ◽  
The State ◽  
Input Output ◽  
Relative Contribution ◽  
State Economy ◽  
Different Types

This study assesses the significance of different types of tourists to Victoria, Australia, by their relative contribution to the economy. Differential impacts are calculated using an input–output model incorporating marginal household coefficients. The analysis demonstrates that the conventional input–output model can overestimate the flow-on effects to value added, income and employment by a significant amount. It finds that domestic tourists are the largest contributor to the State economy, with day-trippers spending the greatest amount. International tourists rank last in terms of economic impacts on the state.

Inside global financial networks

2018 ◽  
Vol 8 (3) ◽  
pp. 294-299 ◽  
Author(s):  
Laura-Marie Töpfer
Keyword(s):  
Firm Behavior ◽  
Financial System ◽  
The State ◽  
Financial Networks ◽  
Different Types ◽  
Competitive Hierarchies ◽  
Global Financial System

The commentaries on this forum’s anchor article, ‘China’s Integration into the Global Financial System: Toward a State-led Conception of Global Financial Networks’, examine how the state is shaping global financial networks (GFNs). In response to these reviews, this article discusses three common themes that bind the different commentaries: (1) different types of agency, power, and the rise of new actors; (2) the methodology behind studying state-led GFNs; and (3) the structural question of ‘Chinese exceptionalism’ as a mode of capitalism. Overall, this article affirms that the state remains central to our understanding of competitive hierarchies and firm behavior in financial networks.

Sign in / Sign up

Export Citation Format

Share Document