scholarly journals Synthesis of graphene/Fe3O4 nano composites

2015 ◽  
Vol 18 (2) ◽  
pp. 166-176
Author(s):  
Trinh Thi Tuyet Ho ◽  
Tam Thanh Mai ◽  
Huy Duc Ha
Keyword(s):  
Aqueous Media ◽  
Synthesis Method ◽  
Environmental Water ◽  
Water Soluble ◽  
Coprecipitation Method ◽  
Nano Particles ◽  
Magnetic Characteristics ◽  
Maximum Adsorption Capacity ◽  
Freundlich Isotherms ◽  
Structure Morphology

In this work, we have demonstrated a coprecipitation method combined in situreduction method for the synthesis of graphene/magnetite nanocomposites (MRGO) and for its application in dye removal from aqueous media for the environmental water treatment. The Fe3O4 nano particles were synthesized by coprecipitation method, and water-soluble chitosan was used as surface-active substances to help the dispersion stability of Fe3O4 nano particles. In addition, graphene oxide (GO) was reduced into graphene by Lascorbic acid. The structure, morphology, and magnetic characteristics of the nanosized composite were investigated by analysis methods such as XRD, FTIR, TEM, SEM, VSM, TGA ... The synthesis method is efficient, scalable, green, and controllable. Fe3O4 nanoparticles in size of 9-15 nm were homogeneously dispersed onto graphene sheets. The saturated magnetization of MRGO is 41 emu/g. Adsorption isotherm of Rhodamine (RhB) onto RGO/Fe3O4 nanocomposites were studied in a batch system. The experimental results showed that the adsorption data were much fitted with Langmuir adsorption isotherms than with Freundlich isotherms. The maximum adsorption capacity of RhB on MRGO is 38 mg/g.

scholarly journals Eco-Friendly Ferrimagnetic-Humic Acid Nanocomposites as Superior Magnetic Adsorbents

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5125
Author(s):  
Chenhua Deng ◽  
Linjie Hou ◽  
Caifeng Zhang
Keyword(s):  
Hydrothermal Synthesis ◽  
Humic Acid ◽  
Synthesis Method ◽  
Coprecipitation Method ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
High Sorption Capacity ◽  
Magnetic Adsorbents ◽  
High Sorption ◽  
Efficient Adsorbent

Recyclable, cheap, eco-friendly, and efficient adsorbent materials are very important for the removal of pollution. In this work, we report the design and implementation of ferrimagnetic-humic acid nanocomposites as superior magnetic adsorbent for heavy metals. Ferrimagnetic and ferrimagnetic-humic acid nanocomposite particles with different morphologies were prepared using the coprecipitation method and hydrothermal synthesis method, respectively. The results show that the morphology of the nanoparticles prepared by the coprecipitation method is more uniform and the size is smaller than that by the hydrothermal synthesis method. Adsorption experiments show that the ferrimagnetic-humic acid nanoparticles prepared by the coprecipitation method has high sorption capacity for cadmium, and the maximum adsorption capacity is about 763 μg/g. At the same time, magnetic technology can be used to realize the recycling of ferrimagnetic-humic acid adsorbents.

scholarly journals Synthesis of novel adsorbent based on tetrasulfide-functionalized fibrous silica KCC-1 for removal of Hg(II) cations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Azam Marjani ◽  
Reza Khan Mohammadi
Keyword(s):  
Effective Interaction ◽  
Sol Gel ◽  
Aqueous Media ◽  
Synthesis Method ◽  
Mercury Ions ◽  
Toxic Heavy Metals ◽  
Uptake Capacity ◽  
Hydrothermal Preparation ◽  
Ultrasonic Assisted ◽  
First Time

AbstractHg(II) has been identified to be one of the extremely toxic heavy metals because of its hazardous effects and this fact that it is even more hazardous to animals than other pollutants such as Ag, Au, Cd, Ni, Pb, Co, Cu, and Zn. Accordingly, for the first time, tetrasulfide-functionalized fibrous silica KCC-1 (TS-KCC-1) spheres were synthesized by a facile, conventional ultrasonic-assisted, sol–gel-hydrothermal preparation approach to adsorb Hg(II) from aqueous solution. Tetrasulfide groups (–S–S–S–S–) were chosen as binding sites due to the strong and effective interaction of mercury ions (Hg(II)) with sulfur atoms. Hg(II) uptake onto TS-KCC-1 in a batch system has been carried out. Isotherm and kinetic results showed a very agreed agreement with Langmuir and pseudo-first-order models, respectively, with a Langmuir maximum uptake capacity of 132.55 mg g–1 (volume of the solution = 20.0 mL; adsorbent dose = 5.0 mg; pH = 5.0; temperature: 198 K; contact time = 40 min; shaking speed = 180 rpm). TS-KCC-1was shown to be a promising functional nanoporous material for the uptake of Hg(II) cations from aqueous media. To the best of our knowledge, there has been no report on the uptake of toxic Hg(II) cations by tetrasulfide-functionalized KCC-1 prepared by a conventional ultrasonic-assisted sol–gel-hydrothermal synthesis method.

scholarly journals Efficient Adsorption of Methylene Blue by Porous Biochar Derived from Soybean Dreg Using a One-Pot Synthesis Method

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 661
Author(s):  
Zhiwei Ying ◽  
Xinwei Chen ◽  
He Li ◽  
Xinqi Liu ◽  
Chi Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
Urban Pollution ◽  
Maximum Adsorption Capacity ◽  
One Pot ◽  
Average Pore ◽  
X Ray ◽  
Isotherm Equation

Soybean dreg is a by-product of soybean products production, with a large consumption in China. Low utilization value leads to random discarding, which is one of the important sources of urban pollution. In this work, porous biochar was synthesized using a one-pot method and potassium bicarbonate (KHCO3) with low-cost soybean dreg (SD) powder as the carbon precursor to investigating the adsorption of methylene blue (MB). The prepared samples were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), elemental analyzer (EA), Brunauer-Emmett-Teller (BET), X-ray diffractometer (XRD), Raman spectroscopy (Raman), Fourier transform infrared spectrometer (FTIR), and X-ray photoelectron spectroscopy (XPS). The obtained SDB-K-3 showed a high specific surface area of 1620 m2 g−1, a large pore volume of 0.7509 cm3 g−1, and an average pore diameter of 1.859 nm. The results indicated that the maximum adsorption capacity of SDB-K-3 to MB could reach 1273.51 mg g−1 at 318 K. The kinetic data were most consistent with the pseudo-second-order model and the adsorption behavior was more suitable for the Langmuir isotherm equation. This study demonstrated that the porous biochar adsorbent can be prepared from soybean dreg by high value utilization, and it could hold significant potential for dye wastewater treatment in the future.

scholarly journals Self-Healing Polymer-Clay Hybrids by Facile Complexation of a Waterborne Polymer with a Clay

2021 ◽  
Author(s):  
Aranee Pleng Teepakakorn ◽  
Makoto Ogawa
Keyword(s):  
Vinyl Alcohol ◽  
Aqueous Media ◽  
Water Soluble ◽  
Poly Vinyl Alcohol ◽  
Self Healing ◽  
Soluble Polymer ◽  
Water Soluble Polymer ◽  
Smectite Clay

Water-induced self-healing materials were prepared by the hybridization of a water-soluble polymer, poly(vinyl alcohol), with a smectite clay by mixing in an aqueous media and subsequent casting. Without using chemical...

scholarly journals Silica Monolith for the Removal of Pollutants from Gas and Aqueous Phases

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1316
Author(s):  
Vanessa Miglio ◽  
Chiara Zaccone ◽  
Chiara Vittoni ◽  
Ilaria Braschi ◽  
Enrico Buscaroli ◽  
...  
Keyword(s):  
Rhodamine B ◽  
Water Solution ◽  
Synthesis Method ◽  
Textural Properties ◽  
Adsorption Properties ◽  
Water Soluble ◽  
Silica Monoliths ◽  
Physico Chemical ◽  
Gaseous Toluene ◽  
Mcm 41

This study focused on the application of mesoporous silica monoliths for the removal of organic pollutants. The physico-chemical textural and surface properties of the monoliths were investigated. The homogeneity of the textural properties along the entire length of the monoliths was assessed, as well as the reproducibility of the synthesis method. The adsorption properties of the monoliths for gaseous toluene, as a model of Volatile Organic Compounds (VOCs), were evaluated and compared to those of a reference meso-structured silica powder (MCM-41) of commercial origin. Silica monoliths adsorbed comparable amounts of toluene with respect to MCM-41, with better performances at low pressure. Finally, considering their potential application in water phase, the adsorption properties of monoliths toward Rhodamine B, selected as a model molecule of water soluble pollutants, were studied together with their stability in water. After 24 h of contact, the silica monoliths were able to adsorb up to the 70% of 1.5 × 10−2 mM Rhodamine B in water solution.

Dissociation of imino proton(s) of a highly water-soluble metal-free phthalocyanine and determination of its pKa value in water

2013 ◽  
Vol 17 (06n07) ◽  
pp. 447-453 ◽  
Author(s):  
Hiroaki Isago ◽  
Harumi Fujita
Keyword(s):  
Aqueous Media ◽  
Thermal Reaction ◽  
Water Soluble ◽  
Acid Dissociation ◽  
Acid Dissociation Constant ◽  
Metal Free ◽  
Imino Proton ◽  
Pka Value ◽  
Triton X

Dissociation of imino proton(s) in the cavity of the macrocycle of a highly water-soluble, metal-free phthalocyanine ( H 2( H 4 tsppc ); where H 4 tsppc denotes tetrakis{(2′,6′-dimethyl-4′-sulfonic acid)phenoxy}phthalocyaninate) in ethanolic and aqueous solutions has spectrophotometrically been investigated. The spectral changes associated with reaction with NaOH have been found to involve one-proton transfer process in aqueous media while two-protons process in ethanolic media. The acid-dissociation constant of the first imino proton in water (in the presence of Triton X-100) has been determined to be 12.5 ± 0.2 (as pKa) at 25 °C. The doubly deprotonated species in EtOH has been easily converted to its corresponding cobalt(II) derivative by thermal reaction with anhydrous CoCl 2.

scholarly journals Sustainable Chromium (VI) Removal from Contaminated Groundwater Using Nano-Magnetite-Modified Biochar via Rapid Microwave Synthesis

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 103
Author(s):  
Xiaoming Song ◽  
Yuewen Zhang ◽  
Nan Cao ◽  
Dong Sun ◽  
Zhipeng Zhang ◽  
...  
Keyword(s):  
Synthesis Method ◽  
Microwave Treatment ◽  
Contaminated Groundwater ◽  
Maximum Adsorption Capacity ◽  
Intraparticle Diffusion Model ◽  
Adsorption Mechanisms ◽  
Chromium Vi ◽  
Modified Biochar ◽  
Pseudo Second Order ◽  
Nano Fe3o4

This study developed a nano-magnetite-modified biochar material (m-biochar) using a simple and rapid in situ synthesis method via microwave treatment, and systematically investigated the removal capability and mechanism of chromium (VI) by this m-biochar from contaminated groundwater. The m-biochar was fabricated from reed residues and magnetically modified by nano-Fe3O4. The results from scanning electron microscopy (SEM) and X-ray diffraction (XRD) characterisations confirmed the successful doping of nano-Fe3O4 on the biochar with an improved porous structure. The synthesised m-biochar exhibited significantly higher maximum adsorption capacity of 9.92 mg/g compared with that (8.03 mg/g) of the pristine biochar. The adsorption kinetics followed the pseudo-second-order model and the intraparticle diffusion model, which indicated that the overall adsorption rate of Cr(VI) was governed by the processes of chemical adsorption, liquid film diffusion and intramolecular diffusion. The increasing of the pH from 3 to 11 significantly affected the Cr(VI) adsorption, where the capabilities decreased from 9.92 mg/g to 0.435 mg/g and 8.03 mg/g to 0.095 mg/g for the m-biochar and pristine biochar, respectively. Moreover, the adsorption mechanisms of Cr(VI) by m-biochar were evaluated and confirmed to include the pathways of electrostatic adsorption, reduction and complexation. This study highlighted an effective synthesis method to prepare a superior Cr(VI) adsorbent, which could contribute to the effective remediation of heavy metal contaminations in the groundwater.

scholarly journals Nanostructured LiFe5O8 by a Biogenic Method for Applications from Electronics to Medicine

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 193
Author(s):  
Silvia Soreto Teixeira ◽  
Manuel P. F. Graça ◽  
José Lucas ◽  
Manuel Almeida Valente ◽  
Paula I. P. Soares ◽  
...  
Keyword(s):  
Spinel Ferrite ◽  
Sol Gel ◽  
Reaction Medium ◽  
Magnetic Hyperthermia ◽  
Magnetic Characteristics ◽  
Secondary Phases ◽  
Heat Treated ◽  
Structure Morphology ◽  
Sol Gel Process ◽  
Crystallite Sizes

The physical properties of the cubic and ferrimagnetic spinel ferrite LiFe5O8 has made it an attractive material for electronic and medical applications. In this work, LiFe5O8 nanosized crystallites were synthesized by a novel and eco-friendly sol-gel process, by using powder coconut water as a mediated reaction medium. The dried powders were heat-treated (HT) at temperatures between 400 and 1000 °C, and their structure, morphology, electrical and magnetic characteristics, cytotoxicity, and magnetic hyperthermia assays were performed. The heat treatment of the LiFe5O8 powder tunes the crystallite sizes between 50 nm and 200 nm. When increasing the temperature of the HT, secondary phases start to form. The dielectric analysis revealed, at 300 K and 10 kHz, an increase of ε′ (≈10 up to ≈14) with a tanδ almost constant (≈0.3) with the increase of the HT temperature. The cytotoxicity results reveal, for concentrations below 2.5 mg/mL, that all samples have a non-cytotoxicity property. The sample heat-treated at 1000 °C, which revealed hysteresis and magnetic saturation of 73 emu g−1 at 300 K, showed a heating profile adequate for magnetic hyperthermia applications, showing the potential for biomedical applications.

Ouricuri (Syagrus coronata) fiber: a novel biosorbent to remove methylene blue from aqueous solutions

2016 ◽  
Vol 75 (1) ◽  
pp. 106-114 ◽  
Author(s):  
Lucas Meili ◽  
Társila Santos da Silva ◽  
Daniely Carlos Henrique ◽  
João Inácio Soletti ◽  
Sandra Helena Vieira de Carvalho ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Experimental Design ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Fiber Diameter ◽  
Aqueous Media ◽  
Process Efficiency ◽  
Maximum Adsorption Capacity ◽  
Equilibrium Studies

In this work, the potential of ouricuri (Syagrus coronata) fiber as a novel biosorbent to remove methylene blue (MB) from aqueous solutions was investigated. The fiber was prepared and characterized according to the fundamental features for adsorption. A 23 experimental design was used to evaluate the effects of adsorbent dosage (M), fiber diameter (D) and agitation (A) on the adsorption capacity. In the more adequate conditions, kinetic and equilibrium studies were performed. The experimental design results showed that M = 10 g L−1), D = 0.595 mm and A = 200 rpm were the more adequate conditions for MB adsorption. Based on the kinetic study, it was found that the adsorption process was fast, being the equilibrium was attained at about 5 min, with 90% of color removal. The isotherm was properly represented by the Sips model, and the maximum adsorption capacity was 31.7 mg g−1. In brief, it was demonstrated that ouricuri fiber is an alternative biosorbent to remove MB from aqueous media, taking into account the process efficiency and economic viewpoint.

scholarly journals A Novel Photosynthesis of Carboxymethyl Starch-Stabilized Silver Nanoparticles

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
M. A. El-Sheikh
Keyword(s):  
Silver Nanoparticles ◽  
Room Temperature ◽  
Colloidal Solution ◽  
Synthesis Method ◽  
Silver Ions ◽  
Water Soluble ◽  
Synthesis Process ◽  
Carboxymethyl Starch ◽  
Round Shape ◽  
First Time

The water soluble photoinitiator (PI) 4-(trimethyl ammonium methyl) benzophenone chloride is used for the first time in the synthesis of silver nanoparticles (AgNPs). A new green synthesis method involves using PI/UV system, carboxymethyl starch (CMS), silver nitrate, and water. A mechanism of the reduction of silver ions to AgNPs by PI/UV system as well as by the newly born aldehydic groups was proposed. The synthesis process was assessed by UV-vis spectra and TEM of AgNPs colloidal solution. The highest absorbance was obtained using CMS, PI and AgNO3concentrations of 10 g/L, 1 g/L, and 1 g/L, respectively; 40°C; 60 min; pH 7; and a material : liquor ratio 1 : 20. AgNPs so-obtained were stable in aqueous solution over a period of three weeks at room temperature (~25°C) and have round shape morphology. The sizes of synthesized AgNPs were in the range of 1–21 nm and the highest counts % of these particles were for particles of 6–10 and 1–3 nm, respectively.

Sign in / Sign up

Export Citation Format

Share Document