scholarly journals Optimation and Sensory Profile of Functional Drink from Cinnamon and Cardamom

2020 ◽  
Vol 4 (2) ◽  
pp. 189-195
Author(s):  
Mardiana Mardiana ◽  
Novriza Sativa ◽  
Hari Hariadi ◽  
Nanda Triandita ◽  
Nela Eska Putri
Keyword(s):  
Moisture Content ◽  
Sensory Evaluation ◽  
Sensory Analysis ◽  
Raw Materials ◽  
Ash Content ◽  
Sensory Profile ◽  
Amomum Compactum ◽  
Functional Drink ◽  
Maximum Moisture Content

Functional drinks can be made from local herbal ingredients that are often used for spices such as cinnamon (Cinnamomum burmanni) and cardamom (Amomum compactum). The purpose of this study is to determine the best formulation of cinnamon and cardamon as a herbal drink based on moisture content, ash content , and sensory evaluation. Raw materials were dried at 50 °C until reached a maximum moisture content 10% and were reduced in size. The formulations were made of comparison between cinnamon and cardamom which were A (100: 0)%; B (80:20)%; C (60:40)%; D (50:50)%; E (40:60)%; F (20:80)%; and G (0: 100)%. The moisture content of all formulas is between 7.12-7.33% (<10%) and the ash content of all formulas is between 4.83-5.06%. The results of sensory analysis showed that formula B had the best acceptance for color (3.03) and aroma (3.17). Thisproducthad moisture 7.23 % and ash content 4.83 %.

scholarly journals KARAKTERISTIK SIFAT-SIFAT KIMIA DAN ORGANOLEPTIK KUE KERING BERBAHAN DASAR PATI SAGU, UBI KAYU, UBI JALAR DAN KELADI

2016 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Febby J Polnaya ◽  
Rachel Breemer
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Sweet Potato ◽  
Sensory Analysis ◽  
Total Protein ◽  
Proximate Composition ◽  
Ash Content ◽  
Crude Fiber ◽  
Brownish Yellow ◽  
Color Texture

The purpose of this research was to characterize chemical and sensory properties (color, texture, taste and liking) of starch-based sago, cassava, sweet potato and cocoyam cookies. Analysis of cookies include moisture content, ash, fat, protein, crude fiber and sensory analysis including color, texture, taste and likeness). The proximate composition indicated that the water content of cookies varied between 1.48 to 2.05%, ash content of 0.65 to 0.72%, 19.23 to 21.76% of fat, crude fiber from 0.41 to 0.71% and 1.33 to 2.42% of total protein. Based on organoleptic tests, the color of cookies was yellow to brownish-yellow, with crispy texture, the taste was sweet and were mostly preferred.

scholarly journals Pemanfaatan Limbah Kulit Buah Naga (Hylocereus costaricensis) dalam Pembuatan Teh Herbal dengan Penambahan Jahe

2017 ◽  
Vol 2 (3) ◽  
pp. 233-243
Author(s):  
Raudhatul Aiyuni ◽  
Heru Prono Widayat ◽  
Syarifah Rohaya
Keyword(s):  
Moisture Content ◽  
Sensory Evaluation ◽  
Block Design ◽  
Ash Content ◽  
Herbal Tea ◽  
Fruit Peel ◽  
Randomized Block Design ◽  
Dragon Fruit ◽  
Two Factors ◽  
The Impact

Abstrak. Tujuan penelitian untuk mengetahui pengaruh suhu pengeringan kulit buah naga dan konsentrasi penambahan jahe terhadap teh herbal serta mengetahui tingkat penerimaan konsumen terhadap teh herbal kulit buah naga dan jahe. Penelitian menggunakan Rancangan Acak Kelompok (RAK) Faktorial dengan 2 faktor. Faktor pertama adalah suhu pengeringan (T) yaitu T1 = 50⁰C, T2 = 60⁰C, T3 = 70⁰C. Faktor kedua adalah konsentrasi jahe (J) yaitu J1= 0%, J2= 10%, J3= 14%. Hasil penelitian menunjukkan bahwa suhu pengeringan berpengaruh sangat nyata (P≤0,01) terhadap kadar air, kadar abu, dan nilai organoleptik warna teh herbal kulit buah naga dan jahe yang dihasilkan, dan berpengaruh nyata (P≤0,05) terhadap nilai organoleptik rasa. Konsentrasi jahe (J) berpengaruh sangat nyata (P≤0,01) terhadap nilai organoleptik rasa teh herbal kulit buah naga dan jahe, dan berpengaruh nyata (P≤0,05) terhadap kadar air, dan nilai organoleptik warna. Interaksi suhu pengeringan dengan konsentrasi jahe (T×J) berpengaruh nyata (P≤0,05) terhadap nilai organoleptik rasa teh herbal kulit buah naga dan jahe. Berdasarkan hasil penelitian diperoleh perlakuan terbaik yaitu perlakuan dengan suhu pengeringan 50OC (T1) dan penambahan konsentrasi jahe 14% (J3) memiliki kadar air 10,89%, kadar abu 5,85%, aktivitas antioksidan 59,05% dan total fenol 6,07 mg GAE/g bahan. Utilization Of Waste Dragon Fruit Peel (Hylocereus Costaricensis) In The Production Of Herbal Tea With Additional Ginger Abstract. The purpose of this study was to know the impact of dried temperature and concentration additional of ginger and also to know the level of accept consumen for herbal tea dragon fruit peel and ginger. This study uses a randomized block design (RAK) Faktorial two factors. The first factor is dried temperature (T) that is T1 = 50⁰C, T2 = 60⁰C, T3 = 70⁰C. Factor II is consentration to add ginger (J) that is J1= 0%, J2= 10%, J3= 14%. The result of it showed that dried temperature obviously affected (P ≤ 0.01) on the moisture content, ash content, and sensory evaluation of color herbal tea dragon fruit peel and ginger, and obviously affected (P≤0,05) to the sensory evaluation of taste. While, the ginger consentration obviously affected (P ≤ 0.01) on the sensory evaluation of taste herbal tea dragon fruit peel and ginger, and obviously affected (P≤0,05) on the moisture content, and sensory evaluation of color. The interaction type of dried temperature with the ginger consentration obviously affected (P≤0,05) on the on the sensory evaluation of taste herbal tea dragon fruit peel and ginger. The best treatment is obtained from dried temperature 50°C (T1) and the addition of ginger concentration of 14% (J3) that product moisture content of  10,89%, ash content 5,85%,  antioxidant activity 59,05% and total phenol 6.07 mg GAE / g of material.

scholarly journals Study of utilization three varieties of mango and concentration of apple vinegar towards physicochemical characteristics of mango chutney

2019 ◽  
Vol 1 (1) ◽  
pp. 4
Author(s):  
Muhammad Husa, Elfi Anis Saati Desiana Nuriza Putri
Keyword(s):  
Antioxidant Activity ◽  
Vitamin C ◽  
Moisture Content ◽  
Raw Materials ◽  
Physicochemical Characteristics ◽  
Ash Content ◽  
Soluble Solids ◽  
Crude Fiber ◽  
Color Intensity ◽  
Total Soluble Solids

Abstract. Chutney is a native Indian processed product, made from cuts of fruits or vegetables and nuts cooked in a sweet, sour and spice mixture. The quality requirements of chutney are influenced by the use of raw materials herbs and spices. The purpose of this study was to determine the response of three varieties of mango and its interaction with concentration of apple vinegar towards physicochemical characteristics of mango chutney. The experimental design of this study used a nested design with two factors. The first factor was three varieties of mango consisting of podang mango, gadung, and kweni and the second factor was the concentration of apple vinegar (5%: 10%: 15%).Parameters analyzed were moisture content, ash content, vitamin C, total soluble solids, total titrated acids, pH, crude fiber, antioxidant activity, color intensity, topicality and hedonic test (flavor, aroma, and appearance). The study showed that differences in mango varieties and apple vinegar concentration did not interact with moisture content, ash content, total soluble solids, total titrated acids, vitamin C, crude fiber, antioxidant activity, pH, color intensity, topicality and hedonic test. The differences in mango varieties significantly affected on water content, color intensity (L and a+), topicality, and hedonic test, whereas the difference of apple vinegar concentration had no significant effect on ash content, pH, total soluble solids, total titrated acids, vitamin C, crude fiber, and antioxidant activity. The optimum composition based on De Garmo test chutney made from gadung mango and 5% apple vinegar (G2C1) with moisture content 23,50 %, ash content 3,15 % vitamin C 0,10 %, total titrated acid 0,75 %, crude fiber 7,05 %, total soluble solids 4,60 ºbrix, ph 4,31 %, antioxidant activity 93,67 %, colour intensity: lightness (L) 36,13, redness (a+ ) 4,67 and yellowness ( b+) 10,00, Topicality 10,67 cm, and hedonic test : appearance 2,13 %, aroma 3,30 % and flavor 2,97 %.

scholarly journals Karakteristik Fisikokimia dan Sensoris Nugget Kijing (Pilsbryoconcha exilis)

2018 ◽  
Vol 7 (1) ◽  
pp. 76-85
Author(s):  
Ina Permata Sari ◽  
Herpandi Herpandi ◽  
Shanti Dwita Lestari
Keyword(s):  
Moisture Content ◽  
Protein Content ◽  
Water Content ◽  
Sensory Analysis ◽  
Block Design ◽  
Ash Content ◽  
Sensory Characteristics ◽  
Chemical Characteristics ◽  
Physical Chemical ◽  
Randomized Block Design

The purpose of this research was to observe the effects of threadfin breams surimi (Nemiptarus nematophorus) and mussel (Pilsbryoconcha exilis) to physical, chemical and sensory characteristics of nugget. This research used randomized block design (RBD) consisted of one factor treatment and three replications. Factor treatment consisted of combination ratio threadfin breams surimi and mussel 100% : 0%, 75% : 25%, 50% : 50%, 25% : 75%, 0% : 100%. The variables observed were physical characteristics (elasticity), chemical characteristics (moisture content, ash, protein, fat, carbohydrate, and iron) and sensory analysis on appereance, flavour, taste and texture of the final products. Different combinations of threadfin breams surimi and mussel had significant effect on elasticity (222.53 gf, 278.33 gf, 300.66 gf, 312.13 gf, 452.86 gf), ash content (3.26%, 2.51%, 2.23%, 1.63%, 1.45%), protein content (8.27%, 12.11%, 14.8%, 17.14%, 20.73%), carbohydrate content (17.32%, 14.34%, 11.11%, 8.42%, 3.5%), and iron (23.61%, 18.56%, 12.77%, 7.24%, 1.54%). Based on the results, the greater addition of surimi concentration caused the increasing value of elasticity, protein, and water content. While the greater addition of mussel concentration resulted on the increased value of ash, fat and iron. This research showed that the combination of 75% threadfin breams surimi and 25% mussel produced on nugget with the best characteristics.

scholarly journals Optimization of Formula Film based on Amylopectin Cassava Starch and Carrageenan as a Raw Materials of Capsule Shell

2017 ◽  
Vol 3 (1) ◽  
pp. 20-32
Author(s):  
G Jeni Christi A ◽  
Laksmi Ambarsari ◽  
Heri Purwoto
Keyword(s):  
Moisture Content ◽  
Raw Materials ◽  
Pharmaceutical Preparations ◽  
Ash Content ◽  
Raw Material ◽  
Solubility In Water ◽  
Prediction Response ◽  
Capsule Shell ◽  
Optimum Formula ◽  
Central Composite

Capsules are very important in the packaging of pharmaceutical preparations. Commercial capsule shell is generally made of gelatin from cows and pigs. Alternatives to gelatin from non-animal raw materials can be obtained from polysaccharides like starch and carrageenan. The purpose of this study was to obtain the optimum formula between amylopectin and carrageenan as a raw material subtitute for gelatin capsule shell. Program Design Expert 7.0.0 (trial version) with Response Surface Methodology (RSM) Central Composite Design was used to optimize formula with three variable factors and three response variables. Based on the analysis by determining the adjusted range, program recommends 29 optimization solution with desirability value 1. Formula 6 and 28 was selected for validation with factors 1,01% of amylopectin, 1.01% of carrageenan, 2.17% of glycerin (formula 6) and 3.00% of amylopectin, 2.00% of carrageenan, 2.90% of glycerin (formula 28). Prediction response value was 12.94% of moisture content, 6.35% of ash content (formula 6) and 12.99% of moisture content, 8.67% of ash content (formula 28). Validation result value was 21.45% of moisture content, 7.58% of ash content, 6.12 minutes of solubility in water (formula 6) and 17.67% of moisture content, 7.78% of ash content, 9.30 minutes of solubility in water.

scholarly journals Preparation of raw materials, creation of compositions and granulation from obsolete sludge, peat and biomass

2021 ◽  
pp. 14-18
Author(s):  
Zh.O. Petrova ◽  
Yu.P. Novikova
Keyword(s):  
Moisture Content ◽  
Raw Materials ◽  
Ash Content ◽  
Raw Material ◽  
Optimal Ratio ◽  
Two Component ◽  
Material Preparation

The article presents research on the preparation of raw materials, creation and granulation of compositions from obsolete sludge deposits of peat and biomass. Studies of raw material preparation processes have shown that obsolete sludge deposits have excessive ash content. To reduce ash content, it is advisable to add peat and biomass to sludge. During the study of peat, it was determined that peat extracted from the floodplain of Irpen has a high ash content, so for further research used peat from Chernihiv. The created compositions were subjected to granulation in different compositions and ratios. Preliminary dehydration of peat in the drying cabinet and moistening of the sludge were performed to create different sludge-peat mixtures with different moisture content of sludge and peat. When creating two-component compositions to sludge-peat add biomass. Studies have allowed us to choose the optimal ratio for granulation.

scholarly journals Effect of Peanut Shell Torrefaction on Qualities of The Produced Bio-pellet

REAKTOR ◽  
2019 ◽  
Vol 18 (04) ◽  
pp. 183 ◽  
Author(s):  
Santiyo Wibowo ◽  
Ningseh Lestari
Keyword(s):  
Moisture Content ◽  
Raw Materials ◽  
Calorific Value ◽  
Ash Content ◽  
Peanut Shell ◽  
Fixed Carbon ◽  
Heating Value ◽  
Fuel Consumption Rate ◽  
Peanut Shells ◽  
Previously Treated

Peanut shells could be regarded as biomass wastes generated from agricultural products, which are abundantly available.  The current handling of those wastes is merely through direct incineration, without a proper and controlled manner. Consequently, it could arouse environmental concerns, such as air pollution and human respiratory diseases.  One alternative solution is converting those peanut shells to bio-pellet, expectedly applicable for fuels.  Relevantly, research on bio-pellet manufacture from peanut shells, previously treated with the torrefaction, was conducted. It’s aimed mainly to identify the fuel-related characteristics of bio-pellet products.  The tested bio-pellet parameters covered, moisture content, ash content, volatile matters, fixed carbon content, calorific values, and density.  The results revealed that torrefaction temperature and time at raw materials (peanut shells) could improve their qualities in regard to particular calorific value compared to those before such torrefaction; which referred to Indonesia’s Standard (SNI-8021-2014) for wood bio-pellet.  Further, torrefaction could increase bio-pellet quality which satisfied the SNI’s Standard, except for ash content.  Optimal torrefaction treatment was obtained at 300oC temperature for 60 minutes, whereby it achieved remarkable bio-pellet characteristics in terms of moisture content (3.092%), ash content (6.116%), volatile matters (38.387%), fixed carbon (55.447%), calorific value (6174 cal/g), and density (0.703 g/cm3). The torrefaction bio-pellets from peanut shells could achieve remarkable performances, with respect to fuel consumption rate (0.68 kg/hr), heating value (6174 kcal/kg), and thermal efficiency (16.67%).

scholarly journals Physicochemical Properties and Sensory Evaluation of Banana Peel Flour Biscuits

2019 ◽  
Vol 7 (4.14) ◽  
pp. 253
Author(s):  
Syarifah Khadijah Syed Abu Bakar ◽  
Noorlaila Ahmad ◽  
Fadhilah Jailani
Keyword(s):  
Moisture Content ◽  
Physicochemical Properties ◽  
Dietary Fiber ◽  
Texture Analysis ◽  
Sensory Evaluation ◽  
Wheat Flour ◽  
Ash Content ◽  
Banana Peel ◽  
Total Dietary Fiber ◽  
Overall Acceptability

Banana peels consist of valuable bioactive compounds and yet remain underutilised. This study investigated the effect of banana peel flour incorporation into biscuit formulation. The physicochemical properties and sensorial acceptability of biscuits produced at the different level of substitution (0%, 10%, 20%, 30% and 40%) of Banana Peel Flour (BPF) were determined. The ash content (1.66% to 2.11%), moisture content (2.13% to 2.66%), fat content (24.2% to 30.7%) and total dietary fiber content (1.83 g/100g to 4.70 g/100g) in biscuits increased when the level of BPF substitution increased. The texture analysis demonstrated that BPF-containing biscuits had significantly higher value in hardness (1071.15 to 1300.61g) than control biscuit (992.69 g). İn contrast, the study showed a significant decrease in fracturability, lightness, width and height as the concentration of BPF increased. Sensory evaluation indicated that biscuit incorporated with BPF up to 20% level did not affect the appearance, taste, texture and overall acceptability ratings by the panelists. İn conclusion, BPF can be used as a functional ingredient and partially substituted wheat flour in biscuit production. 

scholarly journals Sensory evaluation of commercial fat spreads based on oilseeds and walnut

2013 ◽  
pp. 21-30
Author(s):  
Etelka Dimic ◽  
Vesna Vujasinovic ◽  
Olga Radocaj ◽  
Bojan Boric
Keyword(s):  
Sensory Evaluation ◽  
Raw Materials ◽  
Standard Procedure ◽  
Peanut Butter ◽  
Point Of View ◽  
Sensory Profile ◽  
Scoring Method ◽  
Walnut Oil ◽  
Butter Oil ◽  
Dark Green

The main focus of this study was on the sensory evaluation of commercial oilseeds spreads, as the most significant characteristic of this type of product from the consumers? point of view. Sensory analysis was conducted by five experts using a quantitative descriptive and sensory profile test, applying a scoring method according to the standard procedure. Five different spreads were evaluated: sunflower, pumpkin, sesame, peanut, and walnut. Oil content and amounts of separated oil on the surface were determined for each spread. The results have shown that the color of spreads was very different, depending on the oilseed: gray for sunflower, brown for walnut, yellowish-brown for peanut butter, ivory for sesame and profoundly dark green for pumpkin seeds spread. The flavor and odor of the spreads were characteristic for the raw materials used; however, the sunflower and walnut spreads had a slight rancid flavor. Generally, the spreadability of all spreads was good, but their mouth feel was not acceptable. During the consumption, all of them were sticking immensely to the roof of the mouth, which made the swallowing harder. The highest total score of 16.20 points (max. 20) was obtained for the peanut butter, while the lowest (10.38) was achieved by the sunflower butter. Oil separation (various degrees) was noticed in all spreads, which negatively influenced the appearance and entire sensorial quality of the products. The quantity of separated oil depended on the age and total amount of oil in the spreads, and was between 1.13% in the peanut butter and 12.15% in the walnut spread in reference to the net weight of the product.

scholarly journals Pengaruh Temperatur, Komposisi Bahan Cangkang Inti Kelapa Sawit dan Konsentrasi Perekat pada Karakteristik Briket Komersial dari Tempurung Kelapa Sawit

2020 ◽  
Vol 4 (2) ◽  
pp. 126
Author(s):  
Guna Bangun Persada ◽  
Putty Yunesti
Keyword(s):  
Moisture Content ◽  
Raw Materials ◽  
Palm Kernel ◽  
Calorific Value ◽  
Good Alternative ◽  
Ash Content ◽  
Fixed Carbon ◽  
Palm Kernel Shell ◽  
Processing Plants ◽  
Cylindrical Mold

Briquettes are an essential product for metal mineral processing plants in Indonesia. One good alternative raw materials for briquettes that do not pollute the environment is the palm kernel shell. This research was conducted by making briquettes from palm kernel shells to find optimal variations in carbonization temperature, material mixture, and adhesive mixture. The research was conducted on a laboratory scale. The palm kernel shell and coal kernel were carbonized at various temperatures, namely 450°C, 550°C, and 650°C, then crushed and sieved to 35 mesh. The powdered palm kernel shell and coal that have become powdered charcoal are weighted based on a mixture of powder and the adhesive composition ratio of 40 g. After that, the briquettes were formed under a pressure of 100 kg/cm² on a cylindrical mold with 40 mm. The analyzes carried out were moisture content, ash content, volatile substances content, fixed carbon content, calorific value, compressive strength, density, porosity, and SEM (Scanning Electron Microscope). The results showed that the briquette from the kernel of the palm kernel shell was optimal at a temperature of 550 ° C with a starch adhesive mixture of 7.5%, a pressure of 100 kg/cm², moisture content of 5.34%, an ash content of 5.81%, a substance content. Volatile amounted to 18.77%, 71.08% for fixed carbon, heating value 7125.86 cal/g. Density of 0.78, porosity of 0.04 and strength of 72.56 kg / cm².

Sign in / Sign up

Export Citation Format

Share Document