scholarly journals DEVELOPMENT OF SLIDE GATE POWDER WITH EMERGENT STRUCTURE TECHNOLOGY PRODUCTION

2020 ◽  
Vol 72 (2) ◽  
pp. 23-38
Keyword(s):  
Research Work ◽  
Slide Gate ◽  
Operation Time ◽  
Powder Coating ◽  
Carbon Layer ◽  
Raw Material ◽  
Automation System ◽  
Thermal Analyser ◽  
Emergent Structure

The paper presents the research work carried out at Ł–IMŻ on the optimisation of the technology for producing an innovative powder for slide gates as part of a research project carried out for PEDMO S.A. in Tychy. Attention was paid to the developed method for assessing the efficiency of coating powder grains with a sintering process inhibitor using thermal analysis. It is an important element in assessing the quality of the powder, and thus allowed to optimise the parameters of its production technology. In order to determine the effectiveness of coating powder grains with a carbon layer of sintering inhibitor, a number of experiments were carried out using a thermal analyser, controlling the type of gases emitting during sample heating, therefore the influence of various factors on the mixer working temperature, such as the temperature in the production hall, raw material temperature and mixer operation time, was examined. An additional area of study was the registration and analysis of acoustic signals emitted by the mixer, carried out in cooperation with EC TEST Systems to develop an objective method for determining the end of the powder coating process, which can be implemented in a production line automation system.

scholarly journals Development of technology for production of hot forged brackets made of S355 J2 +(N) steel bars

10.30544/219 ◽  
2016 ◽  
Vol 22 (2) ◽  
pp. 107-116
Author(s):  
Sveto Cvetkovski
Keyword(s):  
Preliminary Investigation ◽  
Research Work ◽  
Raw Material ◽  
Process Chain ◽  
Forging Process ◽  
Production Parameters ◽  
Stress Relieving ◽  
Steel Bars ◽  
Forging Die

Preliminary investigation of forged brackets produced of S355 J2+(N) steel is presented in this research work. Performed investigation was intended to approve predicted production technology. First, all stages in the complex production process chain were defined, starting from the construction of the forging die, heating of the pieces of raw material, preforming, forging of the piece, frying and stress relieving. Confirmation of the proposed production parameters was performed with an application of appropriate computer program DEFORM F3 Ver10. After performing the forging process, mechanical and microstructural investigations of the produced forging parts were done. These investigations confirmed that preliminary proposed forging process meets all requirements concerning quality of the forged brackets. It means that undesirable forging defects were not detected and mechanical properties (tensile strength and hardness) of the forgings are in accordance with standard requirements.

SISTEM OTOMASI PENYIRAMAN TANAMAN BERBASIS TELEGRAM

SIGMA TEKNIKA ◽  
2019 ◽  
Vol 2 (1) ◽  
pp. 81
Author(s):  
Muhammad Irsyam
Keyword(s):  
Soil Moisture ◽  
Plant Growth ◽  
Water Intake ◽  
Smart Phone ◽  
Growth Failure ◽  
Automation System ◽  
Notification System ◽  
Efficiency And Effectiveness ◽  
Plant Automation

ABSTRAK           Faktor yang menentukan kegagalan pertumbuhan suatu tanaman hampir dipengaruhi oleh teknik atau cara penyiraman tanaman yang salah. Hal ini disebabkan oleh teknik penyiraman yang dilakukan secara manual sehingga tidak semua tanaman mendapatkan asupan air yang merata untuk menghidari tanaman menjadi layu. Faktor lain yang menyebabkan kegagalan pertumbuhan tanaman adalah kelembaban tanah.          Oleh karena itu, untuk mengurangi permasalahan tersebut dirancanglah “Sistem Otomasi Penyiraman Tanaman Berbasis Telegram”. Adapun sistem ini meliputi penyiraman tanaman secara otomatis berdasarkan kadar kelembaban tanah dengan sistem pemberitahuan atau notifikasi yang akan dikirimkan kepada petani dengan menggunakan aplikasi smart phone Telegram.          Sistem ini telah mampu mengontrol penyiraman sesuai dengan kondisi yang diinginkan. Dengan adanya sistem otomasi penyiraman tanaman berbasis telegram maka dapat meningkatkan efesiensi dan efektivitas petani sehingga kualitas tanaman dapat terjaga dengan baik.Kata kunci -- Penyiraman Tanaman, Penyiraman Secara Otomatis, Telegram.ABSTRACT                Factors that determine the failure of a plant's growth of almost are influenced by incorrect cropping techniques or methods. This is caused by the technique of watering is done manually so that not all plants get a uniform water intake to avoid crops withered. Another factor that causes plant growth failure is soil moisture.          Therefore, to reduce the problem was designed "Telegram Based Water Planting Automation System". The system includes automatic watering of plants based on moisture level of the soil with a notification or notification system that will be sent to farmers using Telegram smart phone applications.          This system has been able to control the watering according to the desired conditions. With the telegraph-based plant watering plant automation system can improve the efficiency and effectiveness of farmers so that the quality of the plant can be maintained properly. Keywords -- Watering Plants, Watering Automatically, Telegram.  

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Physico-Chemical Aspects of the Influence of Raw Material Components on the Quality of Ceramic Brick

2019 ◽  
Vol 777 (12) ◽  
pp. 37-42
Author(s):  
G.Yu. SHAGIGALIN ◽  
◽  
P.A. FEDOROV ◽  
L.N. LOMAKINA ◽  
◽  
...  
Keyword(s):  
Raw Material ◽  
Ceramic Brick ◽  
Physico Chemical

Simulation and Emulation Tools for Fog Computing

2020 ◽  
Vol 13 ◽  
Author(s):  
Simar Preet Singh ◽  
Rajesh Kumar ◽  
Anju Sharma ◽  
S. Raji Reddy ◽  
Priyanka Vashisht
Keyword(s):  
Quality Of Service ◽  
Programming Languages ◽  
Traffic Management ◽  
Fog Computing ◽  
Research Work ◽  
Research Experience ◽  
Computing Paradigm ◽  
Quality Of Service Parameters ◽  
User Friendly

Background: Fog computing paradigm has recently emerged and gained higher attention in present era of Internet of Things. The growth of large number of devices all around, leads to the situation of flow of packets everywhere on the Internet. To overcome this situation and to provide computations at network edge, fog computing is the need of present time that enhances traffic management and avoids critical situations of jam, congestion etc. Methods: For research purposes, there are many methods to implement the scenarios of fog computing i.e. real-time implementation, implementation using emulators, implementation using simulators etc. The present study aims to describe the various simulation and emulation tools for implementing fog computing scenarios. Results: Review shows that iFogSim is the simulator that most of the researchers use in their research work. Among emulators, EmuFog is being used at higher pace than other available emulators. This might be due to ease of implementation and user-friendly nature of these tools and language these tools are based upon. The use of such tools enhance better research experience and leads to improved quality of service parameters (like bandwidth, network, security etc.). Conclusion: There are many fog computing simulators/emulators based on many different platforms that uses different programming languages. The paper concludes that the two main simulation and emulation tools in the area of fog computing are iFogSim and EmuFog. Accessibility of these simulation/emulation tools enhance better research experience and leads to improved quality of service parameters along with the ease of their usage.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

scholarly journals Effect of carbon anode production parameters on anode cracking

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Salah Amrani ◽  
Duygu Kocaefe ◽  
Yasar Kocaefe ◽  
Dipankar Bhattacharyay ◽  
Mohamed Bouazara ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Crack Density ◽  
Raw Material ◽  
Carbon Anode ◽  
Know How ◽  
Production Parameters ◽  
Environmental Emissions ◽  
Carbon Anodes ◽  
Tomographic Analysis

AbstractCarbon anodes are used in the electrolytic production of aluminum. The quality of anodes is directly related to the production cost, carbon and energy consumption, and environmental emissions. It is desired that the anodes have high density, low porosity/cracks, low electrical resistivity as well as low air and CO2 reactivities. Low resistivity of anodes reduces energy required to produce aluminum during electrolysis. The presence of cracks and pores increases the anode electrical resistivity. Therefore, it is important to know how and when the pores and cracks form during the anode production so that the necessary actions could be taken to prevent their formation. A study was carried out to investigate the effect of different anode production parameters such as anode composition, type of raw material used, time and top-former bellow pressure of vibro-compactor, green anode cooling medium, and heating rate used during baking on the crack formation. The anodes are fabricated at the carbon laboratory of University of Quebec at Chicoutimi (UQAC) and characterized by measuring their properties (density, electrical resistivity, and surface crack density). The anode properties, hence the anode quality, were correlated with the anode production parameters. Also, their tomographic analysis was carried out to visualize and quantify the internal cracks. Graphical abstract

scholarly journals Comparing quality of life between patients undergoing trans-areola endoscopic thyroid surgery and trans-oral endoscopic thyroid surgery

BMC Surgery ◽  
2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Shuang Shen ◽  
Xiaochi Hu ◽  
Rui Qu ◽  
Youming Guo ◽  
Libo Luo ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Thyroid Surgery ◽  
Short Form ◽  
Endoscopic Thyroidectomy ◽  
Operation Time ◽  
Endoscopic Thyroid Surgery ◽  
Sf 36 ◽  
Areola Approach ◽  
High Level

Abstract Background Compared with conventional open surgery, endoscopic thyroidectomy via the oral vestibular approach (ETVOA) and endoscopic thyroidectomy via the areola approach (ETAA) avoided scarring of the skin, which may help patients achieve a better quality of life (QOL). However, the benefit of the QOL from this technique has not been adequately investigated, therefore this study compared the QOL outcomes between ETVOA and ETAA. Methods 131 patients were enrolled in this study. ETAA surgery and ETVOA surgery were performed in 74 patients and 57 patients, respectively. These patients were followed up at 2 weeks, 4 weeks, and 8 weeks, and their QOL was evaluated using a thyroid surgery-specific questionnaire and a short-form health survey (SF-36). Results There were no differences in clinical characteristics such as gender, age, body mass index (BMI), and tumor size between the two groups. The volume of intraoperative blood loss, cost of hospitalization, and complications between the two procedures showed no differences. Compared with ETAA, ETVOA has a longer operation time, no drainage, and shorter hospital stay. In the QOL questionnaire, several parameters in ETVOA were better. The satisfaction scores of patients undergoing ETVOA were higher. In addition, the cosmetic satisfaction in patients who received ETOVA was significantly better than that of patients who underwent ETAA. The degree of neck movement disorder in patients with ETVOA was milder. Patients who received ETVOA had higher score on the SF-36. Conclusions The trans-oral endoscopic approach can acquire better cosmetic results and achieved high-level QOL.

scholarly journals Effect of Fertilisation on the Quality of Dried Coriander (Coriandrum sativum L.) and Lovage (Levisticum officinale)

Agriculture ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 386
Author(s):  
Natalia Matłok ◽  
Józef Gorzelany ◽  
Adam Figiel ◽  
Maciej Balawejder
Keyword(s):  
Bioactive Compounds ◽  
Crop Production ◽  
Solid Phase ◽  
Quality Parameters ◽  
Raw Material ◽  
Vacuum Microwave ◽  
Dpph Method ◽  
Total Antioxidant ◽  
Total Antioxidant Potential

The study presents the effects of fertilisation on selected quality parameters of the dried material obtained from plants of lovage and coriander. During the crop production process, the plants were treated with two fertilisers containing substances potentially acting as elicitors. The dried material was obtained in course of a drying process carried out in optimum conditions and based on the CD-VMFD method which combines convective pre-drying (CD) at a low temperature (40 °C) with vacuum-microwave finish drying with the use of 240 W microwaves (VMFD). The quality of the dried material was evaluated through measurement of the total contents of polyphenols, total antioxidant potential (ABTS and DPPH method), and the profile of volatile compounds (headspace-solid phase microextractio-HS-SPME) as well as assessment of the colour. It was found that by applying first fertilisation (with organic components) it is possible to significantly increase the contents of both bioactive compounds and volatile substances responsible for the aroma. It was determined that the higher content of bioactive compounds was related to the composition of the first fertiliser, presumably the extract from common nettle. The study showed that the application of the first fertiliser contributed to enhanced quality parameters of the raw material obtained.

Sign in / Sign up

Export Citation Format

Share Document