scholarly journals Growth and Yields Response of Some Varieties of Soybean (Glycine Max (L) Merill) on Ultisol Soil

2020 ◽  
Vol 2 (3) ◽  
pp. 137-145
Author(s):  
Syariani Tambunan ◽  
Afkar Afkar ◽  
Nico Syahputra Sebayang
Keyword(s):  
Nutritional Value ◽  
Block Design ◽  
Agricultural Product ◽  
Test Results ◽  
Plant Seeds ◽  
Randomized Block Design ◽  
Aceh Province ◽  
Glycine Max L ◽  
Wide Adaptation ◽  
Number Of Segments

Soybean is an agricultural product that has a good nutritional value, especially Protein content. This study aims to find superior varieties that have a wide adaptation to the sour soil especially in Ultisol soils. The study was conducted in Gulo Village, Darul Hasanah Sub-District, Southeast Aceh Regency, Aceh Province, from May to September 2019. The study used a non factorial randomized block design (RBD), with 4 treatment varieties (V) levels that were repeated as many as 4 replications; namely V1: Anjasmoro Varieties, V2: Dena Varieties, V3: Deja Varieties 1, V4: Detaptive Varieties 1, Variance analysis test results showed that the plant height was 1 WAP, Age 2 WAP, Age 3 WAP, Age 4 WAP, Age 5 WAP , and Age 6 WAP had no significant effect. However the highest yield on 1 WAP was found in variety V4 (10.40) in the second test and the lowest was in the first test. V2 was second test. While the best number of segments and branches were produced by V3 treatment. The best results for the total number of pods, number of pods, total empty pods, number of sample plant seeds and weight of sample plant seeds were produced by treatment V3.

scholarly journals Pertumbuhan Batang Pada Beberapa Varietas Kedelai (Glycine max (L.) Merr) Terhadap Jenis Tanah Aluvial, Regosol Dan Latosol

2020 ◽  
Vol 13 (01) ◽  
pp. 24-32
Author(s):  
Kurniawan M.R.D ◽  
P. S. Ajiningrum
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Stem Length ◽  
Test Results ◽  
Hypocotyl Length ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Different Types ◽  
Glycine Max L ◽  
Soybean Plants

This study aims to determine the growth of 10 superior soybean varieties planted in 3 different types of soil (alluvial, regosol and latosol) and to find out whether the 3 types of soil give an effect to the growth of 10 superior soybean varieties viewed from 4 parameters (hypocotyl length, length epicotiles, stem length and stem dry weight).This study used a Randomized Block Design (RBD) consisting of 10 varieties of soybean plants (anjasmoro, argomulyo, detam 1, detam 3 prida, detam 4 prida, detap 1, devon 1, devon 2, yellow gepak and deja 1) and 3 types of soil (alluvial, regosol, and latosol) was repeated 2 times. Data were analyzed using the two-way ANAVA 5% test and the 5% DMRT test. The results showed a significant difference in soybean growth. The best soybean varieties in hypocotyl length are Devon 2, in epicotile length are Anjasmoro, Devon 1 and Devon 2, the stem length and dry weight of the stem are Detap 1. The DMRT test results state that all three soil types (alluvial, regosol and latosol) have influence on the parameters of hypocotyl length and epicotyl length, whereas the parameters of stem length and plant dry weight have no effect.   Keywords: Soybean, Variety, Growing test  

scholarly journals PERTUMBUHAN BERBAGAI VARIETAS KEDELAI (Glycine max L. Merril) PADA TANAH ULTISOL KABUPATEN ACEH TENGGARA

2019 ◽  
Vol 7 (2) ◽  
pp. 146
Author(s):  
Syariani Br. Tambunan ◽  
Afkar Afkar
Keyword(s):  
Glycine Max ◽  
Plant Height ◽  
Block Design ◽  
Flowering Period ◽  
Vegetative Period ◽  
Plot Size ◽  
Randomized Block Design ◽  
Aceh Province ◽  
Glycine Max L ◽  
Different Response

This study aims to determine the growth of various soybean varieties on Ultisol soil, especially on Ultisol soils in Kutacane. The study was conducted in Gulo Village, Darul Hasanah District, Southeast Aceh Regency, Aceh Province with hilly topography, from May to September 2019 at an altitude of 3200 asl. The study used a Non Factorial Randomized Block Design (RBD), with 4 treatment varieties (V) repeated in 4 replications with 63 plants per plot with 7 samples per plot. The plot size  is 3 m x 2 m with 30 x 20 cm spacing. The total number of plants was 1008, while the total number of sample plants was 112 plants. There are 4 soybean varieties: (V1) Anjasmoro, (V2) Dena1, (V3) Deja 1, and  (V4) Detap 1. The parameters observed in this study during vegetative period include plant height at 1, 2, 3, 4, 5, and 6 week after planting. The plant height were measured from the base of the stem to the highest leaf. The result is that each variety has a different response to the environment so that the growth, flowering period, and harvest period are also different on Ultisol soil especially in District of Southeast Aceh.

scholarly journals Pertumbuhan dan Hasil Kedelai di Lahan Rawa Lebak dengan Aplikasi Pupuk Hayati dan Kimia

2018 ◽  
Vol 45 (3) ◽  
pp. 263
Author(s):  
Endriani , ◽  
Munif Ghulamahdi ◽  
Dan Eko Sulistyono
Keyword(s):  
Glycine Max ◽  
Soil Fertility ◽  
Block Design ◽  
Randomized Block Design ◽  
National Production ◽  
Glycine Max L ◽  
Number Of Leaves ◽  
Four Levels ◽  
P Fertilizers ◽  
Number Of Branches

Soybean (Glycine max L. Merrill) demand is high in Indonesia, however national production is low, therefore improving productivity is important. The research was aimed to determine the effect of application of biofertilizer containing N- fixing and P- solubilizing bacteria on the growth and production of soybean in lowland swamp. The experiment was conducted  at  Labuhan Ratu VI Village, District of Labuhan Ratu, East Lampung Regency from September to December 2014. The experiment was arranged in factorial randomized block design with three replications. N and P fertilizers were applied in four levels. Doses of N were 0, 11.25, 22.50, 33.75 kg ha-1, doses of P were 0, 36, 72, 108 P2O5 kg ha-1, in combination with and without biofertilizer application. The results showed that interaction between biofertilizer and N significantly affected number of branches and number of leaves at maximum vegetative phase. The influence of three types of fertilizer had no significant effect on the productivity of soybean in lowland swamp with soil pH of 7.0 and medium soil fertility. It is recommended to apply Biofertilizer + 11,25 kg N ha-1 + 36 kg P2O5 ha-1 to obtain high soybean production in lowland swamp area.<br /><br />Keywords: nitrogen, phosphate, productivity, soil fertility<br /><br />

scholarly journals Keragaman Fenotipe dan Heritabilitas Kedelai (Glycine max [L.] Merril) Generasi F6 Hasil Persilangan Wilis X Mlg2521

2017 ◽  
Vol 16 (2) ◽  
Author(s):  
Ridwan Kusuma ◽  
Nyimas Sa’diyah ◽  
Yayuk Nurmiaty
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Grain Weight ◽  
Phenotypic Variance ◽  
Plant Weight ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Heritability Estimates ◽  
Number Of Seeds ◽  
Made In

Soybean consumption here in Indonesia continues to increase each year that is notaccompanied by an increase in soybean production. One way to increase soybeanproduction by using improved varieties. The purpose of this study were (1) Estimating thevalue of the diversity of phenotypes soy F6 generations from crosses between Wilis x Mlg2521,(2) Estimating the heritability estimates soybean F6 generations from crosses Wilis x Mlg2521,(3) Know the numbers expectation of F6 generation crosses Wilis x Mlg2521. The researchwas conducted from March 2014 until June 2014 at the Land Lab Lampung StatePolytechnic and observations made in Laboratory of Seed and Plant Breeding, University ofLampung. Soybean seeds used were F6 generation zuriat from Wilis x Mlg2521, Wilis andMlg2521. The treatment laid out in a randomized block design, 2 replications. The resultsshowed that (1) The diversity of phenotypes population F6 for characters date of flowering,harvesting age, plant height, number of productive branches, total number of pods plant,weight of 100 grains, grain weight plant and number of seeds plant including all the broadcriteria, (2) The value of heritability estimates the population F6 for characters date offlowering, harvesting age, plant height, number of productive branches, total number ofpods plant, weight of 100 grains, grain weight per plant and number of seeds plantbelonging to the high criteria, (3) Number expectations of the population F6 is 7-64-1-8 and7-64-1-3.Keywords: heritability, phenotypic variance, soybean

scholarly journals PERUBAHAN BENTUK DAN UKURAN BENIH DUA KULTIVAR KEDELAI (Glycine max (L.) Merr.) DI JATINANGOR DAN CIKAJANG

2017 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Siti Rodiah ◽  
Zulfatunnisa Zulfatunnisa ◽  
Sumadi Sumadi ◽  
Anne Nuraini ◽  
Meddy Rachmadi ◽  
...  
Keyword(s):  
Glycine Max ◽  
Low Temperature ◽  
Seed Size ◽  
Block Design ◽  
Soybean Seed ◽  
Growth Environment ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Improved Cultivars ◽  
Size Heterogeneity

The variation of the seed size in each species and individuals might be from of difference species adaptation for  a difference environment. This difference may also arise from the constraints of limited formation of seed size. The use of adaptive ciltivars on the growth environment is very influential on the succes in the farm field. This research was aimed to find the adaptation of phase and size seed of two cultivars of soybeans in Jatinangor and Cikajang. This research was held in Jatinangor (Sumedang regency) and Cikajang (Garut regency) from April to July 2016. The design that used in this research was Randomized Block Design (RBD) and Duncan at 5% rate. Improved cultivars that tested in this research were placed at Grobogan and Anjasmoro which were repeated 5 times. The results of experiment showed that adaptation of size seed showed of 100 grains and large seeds. The low temperature condition can increase of variability of seed size. Heterogeneity of environment can not sustain the size of soybean seed. Genetic and environment factors influence significantly for weight of 100 grains and seed size Grobogan in Jatinangor. The weight of 100 grains Grobogan in Jatinangor and Cikajang haved a greater than Anjasmoro. Environmental factors influence yield of soybean, weight of 100 grains of cultivars in Cikajang haved a greater than Jatinangor caused by the seed size.

scholarly journals Studying the Solubility, availability, and uptake of silicon (Si) from some ore minerals in sandy soil

2018 ◽  
Vol 15 (2) ◽  
pp. 69 ◽  
Author(s):  
Rama T. Rashad ◽  
Rashad A. Hussien
Keyword(s):  
Sandy Soil ◽  
Block Design ◽  
Soybean Seed ◽  
Available N ◽  
Randomized Block Design ◽  
Silicon Uptake ◽  
Constant Rate ◽  
Ore Minerals ◽  
Glycine Max L ◽  
The Individual

The solubility and availability of Si from the feldspar, silica, and zeolite as Si-bearing minerals were studied in a sandy soil. Silicon uptake by the soybean (<em>Glycine max L.</em>)<em> </em>plant was discussed. The minerals used were applied before planting in two separate rates; rate 1 ≈ 595.2 and rate 2 ≈ 1190.5 kg ha<strong><sup>-1</sup></strong> accompanied by a ≈ 4.8 kg ha<strong><sup>-1</sup></strong> constant rate of the K-humate sprayed as a solution on soil after planting in a complete randomized block design. The dissolved Si from the different minerals at rate 2 followed an opposite direction to their SiO<sub>2</sub> percentage that may be due to the structural differences: silica (1.46 mg kg<strong><sup>-1</sup></strong> - SiO<sub>2 </sub>=98.4%) &lt; zeolite (1.71 mg kg<strong><sup>-1</sup></strong> - SiO<sub>2 </sub>=75.9%) &lt; feldspar (2.09 mg kg<strong><sup>-1</sup></strong> - SiO<sub>2 </sub>= 71.9%). The individual mineral treatments at rate 2 have almost decreased the available NPK estimated after soybean harvesting. The K-humate has enhanced the effect of silica at rate 2 for the available N and P. The soybean seed yield (kg ha<strong><sup>-1</sup></strong>) increased significantly by 117.9% for the S1 + H, 109.2% for K-humate and 57.5% for the Z2 + H. The seeds’ Si (mg kg<strong><sup>-1</sup></strong>) increased significantly from 3.6% to 102.9% affected by the silica treatments.

scholarly journals Planting Density and Soybean (Glycine max L.) Cultivars Effects on Yield Components in the Amazon

2020 ◽  
Vol 8 (3) ◽  
pp. 63
Author(s):  
Priscila Pereira Sacramento ◽  
Letícia Cunha da Hungria ◽  
Jamil Chaar El-Husny ◽  
Luis De Souza Freitas
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Block Design ◽  
Planting Density ◽  
Maximum Height ◽  
Soybean Cultivars ◽  
Linear Behavior ◽  
Randomized Block Design ◽  
Glycine Max L

The aim of this study was to evaluate the influence of planting density and cultivar of soybean on yield components in the southeast Amazon. The experiment was carried out in an Oxisol, with a randomized block design in a 2 x 4 factorial scheme. The treatments were two soybean cultivars (BRS 9090 RR and BRS 8990 RR) and four planting densities (13, 15, 18 and 20 plants m-1), with three replications. First pod insertion height (IFP), plant height (H), number of pods per plant (NPP), grain yield (Y) and weight of 100 grains (W100) were evaluated. The insertion height of the first pod showed a tendency of increase with the increment of plants per linear meter for cultivar BRS 8990 RR, different of the behavior observed for the cultivar BRS 9090 RR, which only showed difference when the density of 300.000 plants ha-1 was tested. For plant height, among soybean cultivars, there was only difference in D400, with BRS 8990 RR showing a maximum height of 83.3 cm, 21% higher than BRS 9090 RR. When evaluated under D350, BRS 8990 RR showed an increase of 13% in the number of pods compared to BRS 9090 RR. Both cultivars showed linear behavior for the grain yield, increasing according the plant population, with the highest grain yield obtained under the density of 400.000 plants ha-1 (4527.3 kg ha-1). The weight of 100 grains was not influenced by any variation factor.

scholarly journals Does the nitrogen application associated with Azospirillum brasilense inoculation influence corn nutrition and yield?

2019 ◽  
Vol 23 (1) ◽  
pp. 53-59 ◽  
Author(s):  
Elton M. de Souza ◽  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Paulo R. T. da Silva ◽  
Arthur C. dos Santos ◽  
...  
Keyword(s):  
Grain Yield ◽  
Azospirillum Brasilense ◽  
Nutritional Value ◽  
Block Design ◽  
Brazilian Cerrado ◽  
Nitrogen Application ◽  
No Till ◽  
Randomized Block Design ◽  
Set Up ◽  
Corn Grain

ABSTRACT The aim of this study was to investigate the synergistic effect between inoculation with Azospirillum brasilense and nitrogen application, thus enabling a higher efficiency of nitrogen fertilization, as evaluated by nutritional value, components production, and grain yield of irrigated corn. The experiment was conducted in Selvíria, MS, Brazil, under a no-till system, on an Oxisol in the Brazilian Cerrado. The experiment was set up in a randomized block design with four replications, in a 4 × 2 factorial arrangement: four patterns of nitrogen application [application of 30 kg ha-1 of N at sowing and 150 kg ha-1 as cover (30 + 150); 30 kg ha-1 of N at sowing, split into two applications of 75 kg ha-1 as cover (30 + 75 + 75); 180 kg ha-1 of N at sowing (180); and 150 kg ha-1 of N at sowing and 30 kg ha-1 as cover (150 + 30)]; with and without inoculation of the seeds with A. brasilense. The application of 30 kg ha-1 of N at sowing and a single application of 150 kg ha-1 or two applications of 75 kg ha-1 in topdressing, inoculated with Azospirillum brasilense provided better nutrition and development, with a positive reflection on irrigated corn grain yield in the Brazilian Cerrado.

scholarly journals Produtividade e valor nutritivo de gramíneas tropicais em monocultivo e em consórcio com milho na segunda safra

2018 ◽  
Vol 39 (6) ◽  
pp. 2517
Author(s):  
Armindo Neivo Kichel ◽  
Luis Carlos Ferreira de Souza ◽  
Roberto Giolo de Almeida ◽  
José Alexandre Agiova da Costa
Keyword(s):  
Crude Protein ◽  
Dry Matter ◽  
Nutritional Value ◽  
Cropping Systems ◽  
Block Design ◽  
Panicum Maximum ◽  
Forage Production ◽  
Brachiaria Brizantha ◽  
Brachiaria Ruziziensis ◽  
Randomized Block Design

This study aimed to assess productivity and nutritional value of the tropical grasses Brachiaria brizantha cv. Piatã, Xaraés, and Marandu, Panicum maximum cv. Mombaça, and B. ruziziensis cv. Kennedy in the interseason of an integrated crop-livestock (ICL) system since alternatives are needed for forage production for animal grazing in Autumn and Winter. The experimental design was a randomized block design in a split-split plot scheme with four replications. The treatments of plots consisted of five grasses, subplots consisted of three cropping systems (monoculture, intercropping with corn and unsuppressed grass, and intercropped with corn and suppressed grass), and sub-subplots consisted of four cutting intervals of grasses (50, 90, 125, and 195 days after emergence - DAE). The experiment was carried out from February to September 2014. Dry matter (DM) productivity, obtained at 195 DAE for the three cropping systems (monoculture grass, unsuppressed and suppressed grass in intercropping), were 18.45, 7.15, and 3.05 t ha?1, respectively, and average crude protein contents of leaf blades of grasses decreased linearly between the cutting intervals of 50 to 195 DAE from 19.95 to 9.70%, respectively. Under integrated systems, the studied grasses showed better yields and nutritional quality when compared to traditional grazing systems. Panicum maximum cv. Mombaça and Brachiaria brizantha cv. Xaraés and Piatã had the highest leaf and crude protein yields when compared to Brachiaria ruziziensis cv. Kennedy and Brachiaria brizantha cv. Marandu. In terms of nutritional value, Brachiaria ruziziensis cv. Kennedy was superior to Mombaça and Xaraés grasses but had lower total dry matter yield. Finally, Xaraés, Piatã and Mombaça grasses are recommended choices ICL systems when fodder grass production is the goal.

The role of Vesicular Arbuscular Mycorrhiza (VAM) and rock phosphate application on production and nutritional value of centro legumes(Centrosema pubescens)

2016 ◽  
Vol 39 (6) ◽  
Author(s):  
Nyimas Popi Indriani ◽  
Yuyun Yuwariah ◽  
Ana Rochana ◽  
, Iin Susilawati ◽  
Lizah Khairani
Keyword(s):  
Arbuscular Mycorrhiza ◽  
Dry Matter ◽  
Nutritional Value ◽  
Rock Phosphate ◽  
Block Design ◽  
Vesicular Arbuscular Mycorrhiza ◽  
Optimum Dosage ◽  
Randomized Block Design ◽  
Vesicular Arbuscular

The role of Vesicular Arbuscular Mycorrhiza (VAM) and rock phosphate application on production and nutritional value of centro legumes was studied. The aim of the study was to know the interaction of rock phosphate and VAM and to know the optimum dosage of VAM and rock phosphate on production and nutritional value of centro legumes. The experimental design was randomized block design. The treatments and rock phosphate levels was 0, 100, 200 and 300 kg ha-1 of P2O5 with and without VAM. The results revealed that VAM application increase the plant height and dry matter of centro legumes. The optimum dosage of Rock Phosphate was 200 kg ha-1 of P2O5.

Sign in / Sign up

Export Citation Format

Share Document