Pemanfaatan Cangkang Pensi (Corbicula Moltkiana) sebagai Bahan Penyerap Zat Warna Rhodamin B Dalam Larutan

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Rahmiana Zein ◽  
Mutia Khuratul Aini ◽  
Hermansyah Aziz
Keyword(s):  
Rhodamine B ◽  
Sem Analysis ◽  
Spectra Analysis ◽  
Biosorption Capacity ◽  
Biosorption Process ◽  
Langmuir Isotherm Model ◽  
Ft Ir ◽  
Cationic Exchange ◽  
Rhodamin B ◽  
Model Isotherm

Biosorpsi zat warna Rhodamine B menggunakan cangkang Pensi (Corbicula moltkiana) telah dikaji. Percobaan dilakukan dengan system batch guna memperoleh kondisi optimum biosorspi zat warna. Kapasitas biosorpsi zat warna pada pH 2 adalah 0.9958 mg/g, dengan konsentrasi larutan mula-mula 150 mg/L waktu kontak 105 menit, massa biosorben 0.1 g, ukuran partikel 32 µm dan temperature pengeringan biosorben pada 75oC. Model isotherm Langmuir menunjukkan bahwa proses penyerapan berlangsung secara kimia dan biosorpsi homogeny dari adsorbat (Rhodamine B) pada permukaan biosorben membentuk lapisan tunggal dengan nilai R2 0.9966. Analisis XRF menunjukkan bahwa penurunan kadar unsur logam pada cangkang Pensi membuktikan bahwa proses biosorpsi berlangsung dengan pertukaran kation. Hasil analisis spektrum FT-IR membuktikan adanya interaksi antaramolekul Rhodamin B dengan gugus fungsi pada cangkang Pensi. Analisis dengan SEM memperlihatkan bahwa pori-pori cangkang Pensi telah terisi penuh oleh molekul Rhodamin B. Kondisi optimum biosorpsi telah diaplikasikan pada limbah kerupuk merah dengan kapasitas penyerapan sebesar 0,2835 mg/g.   The biosorption of Rhodamine B dyes by Pensi (Corbicula moltkiana) shell has been investigated. The experiment was conducted in batch sistem in order to obtain the optimum conditions of dye biosorption. Biosorption capacity of dye was 0.9958 mg/g at pH 2, initial concentration 150 mg/L, contact time 105 minutes, biosorbent mass 0.1 gram, particle size 32 µ m and biosorbent drying temperature was at 75oC. The Langmuir Isotherm model showed chemisorption and homogeneous biosorption process of adsorbates onto the biosorbent surface formed monolayer dye molecules on the biosorbent surface with R2 value was 0.9966. XRF analysis showed that reduction of metals unsure quantity of pensi shell indicated biosorption process was occupied through cationic exchange. The result of FTIR spectra analysis indicated an interaction between Rhodamin B molecules and functional group of pensi shell. SEM analysis showed that the pensi shell pores were completely filled by Rhodamine B molecules. The optimum condition of biosorption has been aplicated in red chips wastewater industry with biosorption capacity was 0.2835 mg/g.

Characteristics and Mechanisms of Cu (II) Biosorption on Sludge in the Presence of Citrate

2012 ◽  
Vol 599 ◽  
pp. 598-601
Author(s):  
Peng Jia ◽  
Ma Hong Yu
Keyword(s):  
Removal Rate ◽  
Correlation Coefficients ◽  
Kinetic Studies ◽  
Sem Analysis ◽  
Adsorption Mechanisms ◽  
Biosorption Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Modern Analysis ◽  
Ft Ir

The kinetics and thermodynamics of Cu(Ⅱ) biosorption on sludge in the presence of citrate were investigated. Biosorption mechanisms were characterized by biosorption characteristics and modern analysis means such as BET,FT-IR,XRD and SEM. The results show that the system of sludge and complexation of copper reaches equilibrium within 18h and the maximum removal rate of total copper is about 80%. Kinetic studies indicate that pseudo-second order model with correlation coefficients of 0.9959 best fits the biosorption process. The equilibrium of the system follows the Langmuir isotherm model. FT-IR spectral analysis indicates that amides, -OH, COO¯, silicate minerals, phosphate groups and polysaccharides serve as the main active groups. XRD and SEM analysis indicate the crystal shape of sludge changes and metal sediment can be found after biosorption. Adsorption mechanisms contain chelation, precipitation and ion-exchange.

scholarly journals Size Selectivity of Anionic and Cationic Dyes Using LDH Modified Adsorbent with Low-Cost Rambutan Peel to Hydrochar

2021 ◽  
Vol 16 (4) ◽  
pp. 869-880
Author(s):  
Normah Normah ◽  
Novie Juleanti ◽  
Patimah Mega Syah Bahar Nur Siregar ◽  
Alfan Wijaya ◽  
Neza Rahayu Palapa ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Isotherm ◽  
Low Cost ◽  
Sem Analysis ◽  
Blue Dye ◽  
Maximum Adsorption Capacity ◽  
Adsorbent Regeneration ◽  
Langmuir Isotherm Model ◽  
Ft Ir ◽  
Double Hydroxide

Modification of the layered double hydroxide of CuAl-LDHs by composite with hydrochar (HC) to form CuAl-HC LDH. Material characterization by XRD, FT-IR and SEM analysis was used to prove the success of the modification. The characterization of XRD and FT-IR spectra showed similarities to pure LDH and HC. Selectivity experiments were carried out by mixing malachite green, methylene blue, rhodamine-B, methyl orange, and methyl red to produce the most suitable methyl blue dye for CuAl-LDH, HC and CuAl-HC adsorbents. The effectiveness of CuAl-HC LDH as adsorbent on methylene blue adsorption was tested through several influences such as adsorption isotherm, thermodynamics, and adsorbent regeneration. CuAl-HC LDH adsorption isotherm data shows that the adsorption process tends to follow the Langmuir isotherm model with a maximum adsorption capacity of 175.439 mg/g with a threefold increase compared to pure LDH. The effectiveness of the adsorbent for repeated use reaches five cycles as evidenced by the maximum capacity regeneration data reaching 82.2%, 79.3%, 77.9%, 76.1%, and 75.8%. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

scholarly journals An Investigation on Zinc Biosorption with Agar Extraction Waste from Gracilaria tenuistipitata

KIMIKA ◽  
2020 ◽  
Vol 31 (2) ◽  
pp. 11-26
Author(s):  
Nikko Angelo S. Carisma ◽  
Reniza Yvonne E. Gonzales ◽  
Nancy Lazaro-Llanos
Keyword(s):  
Exchange Process ◽  
Kinetic Studies ◽  
The Philippines ◽  
Red Seaweed ◽  
Gracilaria Tenuistipitata ◽  
Spectra Analysis ◽  
Biosorption Capacity ◽  
Future Studies ◽  
Ion Exchange Process ◽  
Ft Ir

This study determined the biosorption capacity of algal waste, obtained through agar extraction from Gracilaria tenuistipitata, a common red seaweed in the Philippines and potential biosorbent, on Zn2+ ions. Agar was extracted from the seaweed and characterized through Fourier-transform infrared spectroscopy (FT-IR). The algal waste was then subjected to a biosorption study involving various Zn2+ standards. Atomic absorption spectroscopy (AAS) and FT-IR were employed to evaluate sorption processes. Biosorption data was analyzed using Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms which yielded  values of 0.9680, 0.8103, and 0.5254, respectively. The Langmuir ( ), Freundlich ( ), and D-R ( ) constants garnered were 0.0231 L/mg, 0.9829 mg/g, and 2.159  10-6 mol2 J-2 respectively, qualifying the adsorption of Zn2+ ions onto the algal waste as a favorable and physical process. FT-IR spectra analysis suggests that carboxylic acid and amide groups are involved in biosorption, possibly an ion-exchange process taking place for the uptake of Zn2+ ions. It was concluded that G. tenuistipitata waste is a promising biosorbent for Zn2+ ions. Performing the biosorption procedure in triplicates and the inclusion of kinetic studies are recommended to improve and ensure the accuracy in determining biosorption capacity and optimization in future studies.

Nano-ZrO2/TiO2 Impregnated Orange Wood Sawdust and Peach Stone Shell Adsorbents for Cr (VI) Removal

2020 ◽  
Vol 16 (7) ◽  
pp. 880-892
Author(s):  
Şerife Parlayıcı ◽  
Kübra Tuna Sezer ◽  
Erol Pehlivan
Keyword(s):  
Contact Time ◽  
Ph Value ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Wood Sawdust ◽  
Adsorption Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Equilibrium Status

Background: In this work, Cr (VI) adsorption on nano-ZrO2๏TiO2 impregnated orange wood sawdust (Zr๏Ti/OWS) and nano-ZrO2๏TiO2 impregnated peach stone shell (Zr๏Ti/PSS) was investigated by applying different adsorption parameters such as Cr (VI) concentrations, contact time, adsorbent dose, and pH for all adsorbents. Methods: The adsorbents were characterized by SEM and FT-IR. The equilibrium status was achieved after 120 min of contact time and optimum pH value around 2 were determined for Cr (VI) adsorption. Adsorption data in the equilibrium is well-assembled by the Langmuir model during the adsorption process. Results: Langmuir isotherm model showed a maximum adsorption value of OWS: 21.65 mg/g and Zr๏Ti/OWS: 27.25 mg/g. The same isotherm displayed a maximum adsorption value of PSS: 17.64 mg/g, and Zr๏Ti/PSS: 31.15 mg/g. Pseudo-second-order kinetic models (R2=0.99) were found to be the best models for describing the Cr (VI) adsorption reactions. Conclusıon: Thermodynamic parameters such as changes in ΔG°, ΔH°, and ΔS° have been estimated, and the process was found to be spontaneous.

Competitive Biosorption of Pb(II) and Cu(II) by Functionalised Micropogonias undulates Scales

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Ibrahim O. Tijani ◽  
Oluwaseun J. Ajala ◽  
Fisayo O. Ayandele ◽  
Omodele A. Eletta ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Fish Scales ◽  
Wet Impregnation ◽  
Monolayer Adsorption ◽  
Competitive Biosorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Best Fit

Background: Modified bio-based adsorbents from plant sources can be used for pollution remediation by adsorption due to their low cost and availability in large quantities. Objective: In this study, the competitive biosorption of Pb(II) and Cu(II) by Micropogonias undulates functionalised fish scales (FFS) was conducted. The functionalisation was done by wet impregnation with Fe2+. Method: The biosorbent was characterised by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS) and Branueur–Emmett–Teller (BET) analyses. Results: The major constituents in the FFS were calcium and phosphorus from the collagen and apatite on the scales. Optimum removal efficiency for both metals was >99% at 10 g/l dosage. It was observed that the Langmuir isotherm model and the pseudo second order kinetics model were the best fit for the experimental data. The monolayer adsorption capacity of FFS for Pb(II) and Cu(II) was observed to be 96.15 mg/g and 100 mg/g respectively. Conclusion: The study revealed that the competitive biosorption of heavy metals can be achieved (at a good adsorption capacity) using functionalised Micropogonias undulates fish scales.

scholarly journals Incorporation of silver stearate nanoparticles in methacrylate polymeric monoliths for hemeprotein isolation

2020 ◽  
Vol 18 (1) ◽  
pp. 399-411
Author(s):  
Eman Alzahrani
Keyword(s):  
Noble Metals ◽  
Extraction Process ◽  
Sem Analysis ◽  
X Ray ◽  
Polymeric Scaffold ◽  
Extended Surface ◽  
Unique Method ◽  
Unique Approach ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractA unique method was used to synthesize extremely stable silver stearate nanoparticles (AgStNPs) incorporated in an organic-based monolith. The facile strategy was then used to selectively isolate hemeproteins, myoglobin (Myo) and hemoglobin (Hb). Ethyl alcohol, silver nitrate, and stearic acid were, respectively, utilized as reducing agents, silver precursors, and capping agents. The color changed to cloudy from transparent, indicating that AgStNPs had been formed. AgStNP nanostructures were then distinctly integrated into the natural polymeric scaffold. To characterize the AgStNP–methacrylate polymeric monolith and the silver nanoparticles, energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), and Fourier-transform infrared (FT-IR) spectroscopy were used. The results of the SEM analysis indicated that the AgStNP–methacrylate polymeric monolith’s texture was so rough in comparison with that of the methacrylate polymeric monolith, indicating that the extraction process of the monolith materials would be more efficient because of the extended surface area of the absorbent. The comparison between the FT-IR spectra of AgStNPs, the bare organic monolith, and AgStNP–methacrylate polymeric monolith confirms that the AgStNPs were immobilized on the surface of the organic monolith. The EDX profile of the built materials indicated an advanced peak of the Ag sequence which represented an Ag atom of 3.27%. The results therefore established that the AgStNPs had been successfully integrated into the monolithic materials. Extraction efficiencies of 92% and 97% were used to, respectively, recover preconcentrated Myo and Hb. An uncomplicated method is a unique approach of both fabrication and utilization of the nanosorbent to selectively isolate hemeproteins. The process can further be implemented by using other noble metals.

scholarly journals From Waste to Biosorbent: Removal of Congo Red from Water by Waste Wood Biomass

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 279 ◽  
Author(s):  
Marija Stjepanović ◽  
Natalija Velić ◽  
Antonela Galić ◽  
Indira Kosović ◽  
Tamara Jakovljević ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Congo Red ◽  
Contact Time ◽  
Synthetic Wastewater ◽  
Wood Biomass ◽  
Waste Wood ◽  
Biosorption Capacity ◽  
Biosorption Process ◽  
Cr Concentration ◽  
Cr Removal

The aim of the study was to screen the waste wood biomass of 10 wood species as biosorbents for synthetic dye Congo Red (CR) removal from water and to single out the most efficient species for further batch biosorption experiments. Euroamerican poplar (EP), the most efficient species achieving 71.8% CR removal and biosorption capacity of 3.3 mg g−1, was characterized by field emission scanning electron microscopy (FE-SEM) and Fourier transform infrared spectroscopy (FTIR). Different factors affecting the biosorption process were investigated: initial biosorbent concentration (1–10 g dm−3), contact time (5–360 min), initial CR concentration (10–100 mg dm−3), and the initial pH (pH = 4–9). The results showed that CR removal efficiency increased with the increase of biosorbent concentration and contact time. Increase of initial CR concentration led to an increase of the biosorption capacity, but also a decrease of CR removal efficiency. The highest CR removal efficiency was achieved at pH = 4, while at pH = 9 a significant decrease was noticed. The percentage of CR removal from synthetic wastewater was 18.6% higher than from model CR solution. The Langmuir model fitted well the biosorption data, with the maximum biosorption capacity of 8 mg g−1. The kinetics data were found to conform to the pseudo-second-order kinetics model.

Synthesis and Characterization of Silver Nanoparticles from Psidium Guajava Leaf Extract

2021 ◽  
Vol 14 (5) ◽  
pp. 5634-5638
Author(s):  
Sruthi Radhakrishnan
Keyword(s):  
Silver Nanoparticles ◽  
Silver Nanoparticle ◽  
Leaf Extract ◽  
Nanoparticle Synthesis ◽  
Ethanolic Extract ◽  
Psidium Guajava ◽  
Sem Analysis ◽  
Synthesis Of Nanoparticles ◽  
Elemental Silver ◽  
Ft Ir

Green route for the synthesis of nanoparticles has become more acceptable than the other chemical as well as biological route. In the present study, silver nanoparticle is synthesized using ethanolic extract of Psidium guajava leaves. Further the synthesized silver nanoparticles were characterized by UV-Visible Spec, FT-IR, X-Ray Diffraction FESEM and E-DAX. The results of FT-IR provided evidence of the involvement of phytochemicals present in the leaf extract in the reduction of silver nitrate to silver nanoparticles. XRD confirmed the crystalline structure as well as shape of the synthesized nanoparticle as face-centred cubic. E-DAX profiling helped in determining the presence of elemental silver. The size of the nanoparticle procured by SEM analysis was found to be approximately 30-50 nm in size. Thus, the findings of this study showed that the plant assisted method for silver nanoparticle synthesis is more effective and further application level studies can shed lights on their use in healing of various human ailments.   

scholarly journals PVA-Based Mixed Matrix Membranes Comprising ZSM-5 for Cations Separation

Membranes ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 114 ◽  
Author(s):  
Fangmeng Sheng ◽  
Noor Ul Afsar ◽  
Yanran Zhu ◽  
Liang Ge ◽  
Tongwen Xu
Keyword(s):  
Divalent Cations ◽  
Sem Analysis ◽  
Limiting Current ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix ◽  
Transport Pathways ◽  
Dispersion Phase ◽  
Fast Transport ◽  
Cationic Exchange ◽  
Matrix Membranes

The traditional ion-exchange membranes face the trade-off effect between the ion flux and perm-selectivity, which limits their application for selective ion separation. Herein, we amalgamated various amounts of the ZSM-5 with the polyvinyl alcohol as ions transport pathways to improve the permeability of monovalent cations and exclusively reject the divalent cations. The highest contents of ZSM-5 in the mixed matrix membranes (MMMs) can be extended up to 60 wt% while the MMMs with optimized content (50 wt%) achieved high perm-selectivity of 34.4 and 3.7 for H+/Zn2+ and Li+/Mg2+ systems, respectively. The obtained results are high in comparison with the commercial CSO membrane. The presence of cationic exchange sites in the ZSM-5 initiated the fast transport of proton, while the microporous crystalline morphology restricted the active transport of larger hydrated cations from the solutions. Moreover, the participating sites and porosity of ZSM-5 granted continuous channels for ions electromigration in order to give high limiting current density to the MMMs. The SEM analysis further exhibited that using ZSM-5 as conventional fillers, gave a uniform and homogenous formation to the membranes. However, the optimized amount of fillers and the assortment of a proper dispersion phase are two critical aspects and must be considered to avoid defects and agglomeration of these enhancers during the formation of membranes.

scholarly journals Effects of Gum Arabic-Coated Magnetite Nanoparticles on the Removal of Pb Ions from Aqueous Solutions

2021 ◽  
pp. 889-896
Author(s):  
Hanan J. Mustafa ◽  
Tagreed M. Al-Saadi
Keyword(s):  
Aqueous Solutions ◽  
Crystallite Size ◽  
Magnetite Nanoparticles ◽  
Gum Arabic ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
Absorption Bands ◽  
X Ray ◽  
Ft Ir ◽  
Pb Ions

To study the removal of lead (Pb) ions from aqueous solutions, novel magnetite nanoparticles (NPs) of Ni0.31Mg0.15Ag0.04Fe2.5O4 were synthesized by coprecipitation synthesis using metal sulfates, and then coated with Gum Arabic (GA). The prepared NPs were analyzed using various spectroscopic and analytical methods, such as X-Ray diffraction analysis (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray spectroscopy (EDX), Fourier Transform Infra-Red spectroscopy (FT-IR), and Atomic Absorption Spectrophotometer (AAS). By using XRD analysis, the cubic inverse spinel structure of the prepared NPs was proven, showing average values of crystallite size, lattice constant, and density of 28.57nm, 8.32582Å, and 5.2890 g/cm3, respectively. FE-SEM analysis revealed the sphere-like shape of the nanoparticles with a measured crystallite size of 25.93nm. The existence of constituent elements was evidenced by EDX. FT-IR test proved the success of the coating process of magnetite NPs by the presence of the main characteristic absorption bands of GA in the FT-IR spectrum of GA-magnetite NPs. The adsorption of Pb ions by GA- magnetite NPs was shown by AAS analysis, where the concentration of Pb ions decreased from 25ppm to 6.6ppm, reaching 1.1ppm at the time of 25min. The porosity of the NPs and the carboxyl groups in GA played an important role in the process.

Sign in / Sign up

Export Citation Format

Share Document