Characterization of refined papermaking pulps using hydrodynamic parameters from filtration analysis

TAPPI Journal ◽  
2015 ◽  
Vol 14 (5) ◽  
pp. 305-309
Author(s):  
S. S. LAVRYKOV ◽  
B.V. RAMARAO
Keyword(s):  
Fiber Quality ◽  
Quality Analysis ◽  
Hydrodynamic Characteristics ◽  
Pulp Fibers ◽  
Permeability Characteristics ◽  
Surface Areas ◽  
Geometrical Features ◽  
The Impact ◽  
Specific Volumes

It is often necessary to characterize papermaking pulps in order to determine the impact of refining or to predict their drainage properties. The newer methods for pulp quality analysis determine geometrical features of pulp fibers by microimaging techniques. However, features such as fiber length, coarsenes, and their distributions do not yield easily to estimation of their drainage or papermaking properties. In quantifying the impact of refining on fiber quality, it is useful to approach the rheology of pulps as an indicator of their behavior. We determined the hydrodynamic characteristics of a variety of refined pulps along with their permeability characteristics, i.e., the hydrodynamic specific surface area and the specific volume. Our method was to analyze the filtration/drainage curves and fit predictions from models with observed data. This inversion problem is usually complex and requires global minimization techniques. This paper presents data on bleached kraft hardwood pulps and mixtures with fines and how their surface areas and specific volumes change with composition. These data are further used to predict the behavior of the pulps in drainage situations using models of forming.

scholarly journals Possibility of Using t-Plots, Obtained from Nitrogen Adsorption for the Valuation of Zeolites

1986 ◽  
Vol 3 (3) ◽  
pp. 159-166 ◽  
Author(s):  
P. Hudec ◽  
J. Novanský ◽  
S. Silhár ◽  
T. N. Trung ◽  
M. Zúbek ◽  
...  
Keyword(s):  
Specific Surface ◽  
Quantitative Estimation ◽  
Nitrogen Adsorption ◽  
Surface Areas ◽  
Bet Analysis ◽  
Zeolite Content ◽  
Synthetic Zeolites ◽  
Specific Surface Areas ◽  
Specific Volumes

Data of adsorption isotherms of nitrogen adsorption at 77 K on various samples of zeolites were measured. Besides derivation of specific surface area by BET analysis, samples were characterised by values obtained by t-plots; specific surface areas of mesopores and specific volumes of micropores are also calculated. Results show the value of the use of t-plot method for the characterization of microporosity changes in zeolites after various treatments, and also for quantitative estimation of zeolite content in natural zeolites and the crystallinity of synthetic zeolites.

scholarly journals Synthesis and Characterization of Nanoporous Carbon Carriers for Losartan Potassium Delivery

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7345
Author(s):  
Aleksander Ejsmont ◽  
Anna Stasiłowicz-Krzemień ◽  
Dominika Ludowicz ◽  
Judyta Cielecka-Piontek ◽  
Joanna Goscianska
Keyword(s):  
Functional Groups ◽  
Losartan Potassium ◽  
Templating Method ◽  
Precise Control ◽  
Surface Areas ◽  
Ordered Mesoporous ◽  
Adsorption And Release ◽  
New Applications ◽  
The Impact

Losartan potassium is most commonly used for the treatment of hypertension. In recent years, new applications of this drug have emerged, encouraging the design of novel nanoporous carriers for its adsorption and release. The purpose of this study was to synthesize ordered mesoporous carbon vehicles via a soft-templating method altered with the use of nitrogen precursors and via a hard-templating method followed by chitosan functionalization. As a result, the materials obtained differed in nitrogen content as well as in the number of total surface functional groups. The impact of the modification on the physicochemical properties of carbon carriers and their interaction with losartan potassium during adsorption and release processes was examined. The materials were characterized by various morphologies, specific surface areas (101–1180 m2 g−1), and the amount of acidic/basic oxygen-containing functional groups (1.26–4.27 mmol g−1). These features, along with pore sizes and volumes, had a key effect on the sorption capacity of carbon carriers towards losartan potassium (59–161 mg g−1). Moreover, they contributed to the differential release of the drug (18.56–90.46%). Losartan potassium adsorption onto the surface of carbonaceous materials was mainly based on the formation of hydrogen bonds and π–π interactions and followed the Langmuir type isotherm. It has been shown that the choice of the method of carbon carriers’ synthesis and their modification allows for the precise control of the kinetics of the losartan potassium release from their surface, resulting in rapid or sustained drug liberation.

Use of thermomechanical pulp fibers from waste woods for making eco-friendly cushioning material

TAPPI Journal ◽  
2010 ◽  
Vol 9 (7) ◽  
pp. 15-21 ◽  
Author(s):  
JI-YOUNG LEE ◽  
CHUL-HWAN KIM ◽  
JEONG-MIN SEO ◽  
HO-KYUNG CHUNG ◽  
KYUNG-KIL BACK ◽  
...  
Keyword(s):  
Impact Test ◽  
Product Distribution ◽  
Expanded Polystyrene ◽  
Thermomechanical Pulp ◽  
Fiber Structure ◽  
Pulp Fibers ◽  
Cationic Starch ◽  
Thermal Insulating ◽  
Surface Sizing ◽  
The Impact

Eco-friendly cushioning materials were made with thermomechanical pulps (TMPs) from waste woods collected from local mountains in Korea, using a suction-forming method without physical pressing. The TMP cushions had superior shock-absorbing performance, with lower elastic moduli than expanded polystyrene (EPS) or molded pulp. Even though the TMP cushions made using various suction times had many voids in their inner fiber structure, their apparent densities were a little higher than that of EPS and much lower than that of molded pulp. The addition of cationic starch contributed to an increase in the elastic modulus of the TMP cushions without increasing the apparent density, an effect which was different from that of surface sizing with starch. In the impact test, the TMP cushions showed a more ductile pattern than the brittle EPS. The porosity of the TMP cushion was a little less than that of EPS and much greater than that of molded pulp. The porous structure of the TMP cushions contributed to their excellent thermal insulating capacity, which was equivalent to that of EPS. In summary, the TMP packing cushions showed great potential for surviving external impacts during product distribution.

The Analyses of Learning Strategies in English as a Second Language: Theoretical Classification and Measurement Test

2020 ◽  
Vol 4 (2) ◽  
pp. 118-129
Author(s):  
Asti Gumartifa ◽  
◽  
Indah Windra Dwie Agustiani
Keyword(s):  
Language Learning ◽  
Learning Outcomes ◽  
Learning Strategies ◽  
Learning Process ◽  
English Learners ◽  
English Language ◽  
Point Of View ◽  
Effective Learning ◽  
The Impact

Gaining English language learning effectively has been discussed all years long. Similarly, Learners have various troubles outcomes in the learning process. Creating a joyful and comfortable situation must be considered by learners. Thus, the implementation of effective learning strategies is certainly necessary for English learners. This descriptive study has two purposes: first, to introduce the classification and characterization of learning strategies such as; memory, cognitive, metacognitive, compensation, social, and affective strategies that are used by learners in the classroom and second, it provides some questionnaires item based on Strategy of Inventory for Language Learning (SILL) version 5.0 that can be used to examine the frequency of students’ learning strategies in the learning process. The summary of this study explains and discusses the researchers’ point of view on the impact of learning outcomes by learning strategies used. Finally, utilizing appropriate learning strategies are certainly beneficial for both teachers and learners to achieve the learning target effectively.

scholarly journals The impact of the microphysical properties of aerosol on the atmospheric correction of hyperspectral data in coastal waters

2015 ◽  
Vol 8 (3) ◽  
pp. 1593-1604 ◽  
Author(s):  
C. Bassani ◽  
C. Manzo ◽  
F. Braga ◽  
M. Bresciani ◽  
C. Giardino ◽  
...  
Keyword(s):  
Accuracy Assessment ◽  
Atmospheric Correction ◽  
Solar Spectrum ◽  
Hyperspectral Data ◽  
High Spectral Resolution ◽  
Quality Analysis ◽  
Microphysical Properties ◽  
Quantitative Remote Sensing ◽  
The Impact ◽  
Aerosol Types

Abstract. Hyperspectral imaging provides quantitative remote sensing of ocean colour by the high spectral resolution of the water features. The HICO™ (Hyperspectral Imager for the Coastal Ocean) is suitable for coastal studies and monitoring. The accurate retrieval of hyperspectral water-leaving reflectance from HICO™ data is still a challenge. The aim of this work is to retrieve the water-leaving reflectance from HICO™ data with a physically based algorithm, using the local microphysical properties of the aerosol in order to overcome the limitations of the standard aerosol types commonly used in atmospheric correction processing. The water-leaving reflectance was obtained using the HICO@CRI (HICO ATmospherically Corrected Reflectance Imagery) atmospheric correction algorithm by adapting the vector version of the Second Simulation of a Satellite Signal in the Solar Spectrum (6SV) radiative transfer code. The HICO@CRI algorithm was applied on to six HICO™ images acquired in the northern Mediterranean basin, using the microphysical properties measured by the Acqua Alta Oceanographic Tower (AAOT) AERONET site. The HICO@CRI results obtained with AERONET products were validated with in situ measurements showing an accuracy expressed by r2 = 0.98. Additional runs of HICO@CRI on the six images were performed using maritime, continental and urban standard aerosol types to perform the accuracy assessment when standard aerosol types implemented in 6SV are used. The results highlight that the microphysical properties of the aerosol improve the accuracy of the atmospheric correction compared to standard aerosol types. The normalized root mean square (NRMSE) and the similar spectral value (SSV) of the water-leaving reflectance show reduced accuracy in atmospheric correction results when there is an increase in aerosol loading. This is mainly when the standard aerosol type used is characterized with different optical properties compared to the local aerosol. The results suggest that if a water quality analysis is needed the microphysical properties of the aerosol need to be taken into consideration in the atmospheric correction of hyperspectral data over coastal environments, because aerosols influence the accuracy of the retrieved water-leaving reflectance.

scholarly journals Modulation of Gut Microbiota and Oxidative Status by β-Carotene in Late Pregnant Sows

2020 ◽  
Vol 7 ◽  
Author(s):  
Xupeng Yuan ◽  
Jiahao Yan ◽  
Ruizhi Hu ◽  
Yanli Li ◽  
Ying Wang ◽  
...  
Keyword(s):  
Gut Microbiota ◽  
Dietary Supplementation ◽  
Basal Diet ◽  
Fecal Microbiota ◽  
Control Group ◽  
Metabolic Activities ◽  
The Impact ◽  
Positive Effect ◽  
Β Carotene

Recent evidences suggest that gut microbiota plays an important role in regulating physiological and metabolic activities of pregnant sows, and β-carotene has a potentially positive effect on reproduction, but the impact of β-carotene on gut microbiota in pregnant sows remains unknown. This study aimed to explore the effect and mechanisms of β-carotene on the reproductive performance of sows from the aspect of gut microbiota. A total of 48 hybrid pregnant sows (Landrace × Yorkshire) with similar parity were randomly allocated into three groups (n = 16) and fed with a basal diet or a diet containing 30 or 90 mg/kg of β-carotene from day 90 of gestation until parturition. Dietary supplementation of 30 or 90 mg/kg β-carotene increased the number of live birth to 11.82 ± 1.54 and 12.29 ± 2.09, respectively, while the control group was 11.00 ± 1.41 (P = 0.201). Moreover, β-carotene increased significantly the serum nitric oxide (NO) level and glutathione peroxidase (GSH-Px) activity (P < 0.05). Characterization of fecal microbiota revealed that 90 mg/kg β-carotene increased the diversity of the gut flora (P < 0.05). In particular, β-carotene decreased the relative abundance of Firmicutes including Lachnospiraceae AC2044 group, Lachnospiraceae NK4B4 group and Ruminococcaceae UCG-008, but enriched Proteobacteria including Bilophila and Sutterella, and Actinobacteria including Corynebacterium and Corynebacterium 1 which are related to NO synthesis. These data demonstrated that dietary supplementation of β-carotene may increase antioxidant enzyme activity and NO, an important vasodilator to promote the neonatal blood circulation, through regulating gut microbiota in sows.

scholarly journals Clonal approaches to understanding the impact of mutations on hematologic disease development

Blood ◽  
2019 ◽  
Vol 133 (13) ◽  
pp. 1436-1445 ◽  
Author(s):  
Jyoti Nangalia ◽  
Emily Mitchell ◽  
Anthony R. Green
Keyword(s):  
Somatic Mutations ◽  
Clonal Selection ◽  
Single Cells ◽  
Driver Mutations ◽  
Great Promise ◽  
Tumor Evolution ◽  
Disease Development ◽  
Hematopoietic Tissue ◽  
The Impact

Abstract Interrogation of hematopoietic tissue at the clonal level has a rich history spanning over 50 years, and has provided critical insights into both normal and malignant hematopoiesis. Characterization of chromosomes identified some of the first genetic links to cancer with the discovery of chromosomal translocations in association with many hematological neoplasms. The unique accessibility of hematopoietic tissue and the ability to clonally expand hematopoietic progenitors in vitro has provided fundamental insights into the cellular hierarchy of normal hematopoiesis, as well as the functional impact of driver mutations in disease. Transplantation assays in murine models have enabled cellular assessment of the functional consequences of somatic mutations in vivo. Most recently, next-generation sequencing–based assays have shown great promise in allowing multi-“omic” characterization of single cells. Here, we review how clonal approaches have advanced our understanding of disease development, focusing on the acquisition of somatic mutations, clonal selection, driver mutation cooperation, and tumor evolution.

scholarly journals Waterfall Algorithm as a tool of investigation the geometrical features of granular porous media

2021 ◽  
Author(s):  
Wojciech Sobieski
Keyword(s):  
Particle Size ◽  
Porous Media ◽  
Lattice Boltzmann ◽  
Granular Media ◽  
Density Ratio ◽  
Geometrical Features ◽  
Granular Porous Media ◽  
Collision Density ◽  
Boltzmann Method ◽  
The Impact

AbstractThe paper describes the so-called Waterfall Algorithm, which may be used to calculate a set of parameters characterising the spatial structure of granular porous media, such as shift ratio, collision density ratio, consolidation ratio, path length and minimum tortuosity. The study is performed for 1800 different two-dimensional random pore structures. In each geometry, 100 individual paths are calculated. The impact of porosity and the particle size on the above-mentioned parameters is investigated. It was stated in the paper, that the minimum tortuosity calculated by the Waterfall Algorithm cannot be used directly as a representative tortuosity of pore channels in the Kozeny or the Carman meaning. However, it may be used indirect by making the assumption that a unambiguous relationship between the representative tortuosity and the minimum tortuosity exists. It was also stated, that the new parameters defined in the present study are sensitive on the porosity and the particle size and may be therefore applied as indicators of the geometry structure of granular media. The Waterfall Algorithm is compared with other methods of determining the tortuosity: A-Star Algorithm, Path Searching Algorithm, Random Walk technique, Path Tracking Method and the methodology of calculating the hydraulic tortuosity based on the Lattice Boltzmann Method. A very short calculation time is the main advantage of the Waterfall Algorithm, what meant, that it may be applied in a very large granular porous media.

scholarly journals Exploring the Characteristics and Influencing Factors of Leisure Walking Based on the Demand of Behavior

2021 ◽  
Vol 13 (8) ◽  
pp. 4105
Author(s):  
Yupei Jiang ◽  
Honghu Sun
Keyword(s):  
Health Benefits ◽  
Health Benefit ◽  
Public Health Research ◽  
Space Time ◽  
Time Behavior ◽  
Walking Behavior ◽  
Face To Face ◽  
Residential Neighborhood ◽  
The Impact

Leisure walking has been an important topic in space-time behavior and public health research. However, prior studies pay little attention to the integration and the characterization of diverse and multilevel demands of leisure walking. This study constructs a theoretical framework of leisure walking behavior demands from three different dimensions and levels of activity participation, space-time opportunity, and health benefit. On this basis, through a face-to-face survey in Nanjing, China (N = 1168, 2017–2018 data), this study quantitatively analyzes the characteristics of leisure walking demands, as well as the impact of the built environment and individual factors on it. The results show that residents have a high demand for participation and health benefits of leisure walking. The residential neighborhood provides more space opportunities for leisure walking, but there is a certain constraint on the choice of walking time. Residential neighborhood with medium or large parks is more likely to satisfy residents’ demands for engaging in leisure walking and obtaining high health benefits, while neighborhood with a high density of walking paths tends to limit the satisfaction of demands for space opportunity and health benefit. For residents aged 36 and above, married, or retired, their diverse demands for leisure walking are more likely to be fulfilled, while those with high education, medium-high individual income, general and above health status, or children (<18 years) are less likely to be fulfilled. These finding that can have important implications for the healthy neighborhood by fully considering diverse and multilevel demands of leisure walking behavior.

Sign in / Sign up

Export Citation Format

Share Document