scholarly journals Purification of Model Dairy Wastewaters by Ozone, Fenton Pre-treatment and Membrane Filtration

2020 ◽  
Vol 64 (3) ◽  
pp. 357-363 ◽  
Author(s):  
Mihály Zakar ◽  
Dániel Imre Farkas ◽  
Erika Hanczné Lakatos ◽  
Gábor Keszthelyi-Szabó ◽  
Zsuzsanna László
Keyword(s):  
Protein Separation ◽  
Membrane Filtration ◽  
Separation Efficiency ◽  
Dominant Role ◽  
Sodium Caseinate ◽  
Pollutant Removal ◽  
Ion Concentration ◽  
Fenton Reagents ◽  
Pre Treatment ◽  
Flocculation Effect

This study aimed to investigate the effect of ozone and Fenton-reaction as a pre-treatment before ultrafiltration of model dairy waste waters containing sodium caseinate. Filtration resistances and pollutant retentions were determined and compared. It was found, that both pre-treatment increased the retention, achieving almost 100 % pollutant elimination efficiency after short term pre-oxidation. The effect of Fe-ion concentration on Fenton pretreatment efficiency also was examined, and it was found that higher concentration resulted in decreased filtration resistances, revealing that coagulation-flocculation effect of reactants has dominant role in the protein separation efficiency. The presence of lactose also affects the pollutant removal efficiency, it promotes fouling in presence of Fenton reagents.

scholarly journals Purification of Dairy Wastewaters by Advanced Oxidation Processes and Membrane Filtration

2017 ◽  
Vol 11 (1) ◽  
pp. 32-38
Author(s):  
Mihály Zakar ◽  
Erika Lakatos ◽  
Gábor Keszthelyi-Szabó ◽  
Zsuzsanna László
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Separation ◽  
Separation Efficiency ◽  
Scale Up ◽  
Separation Processes ◽  
Physicochemical Changes ◽  
Current Trends ◽  
Pre Treatment ◽  
Cost Efficient

Membrane separation processes are space and cost-efficient, easy to scale-up operations, which have proved to treat food industrial wastewaters efficiently. Beside the advantages like high separation efficiency without any chemical changes and low energy-intensity, membrane filtration also has drawbacks, like decreased operational efficiency caused by flux decile resulting from fouling and concentration polarization. Combination of oxidation pre-treatment and membrane filtration is a promising method for decreasing fouling due to the physicochemical changes caused by pre-oxidation of the wastewater in structure of colloidal pollutants and in the interactions between the foulants and the membrane material. The aim of this work is to identify the parameters affecting the membrane fouling during treatment of dairy wastewaters, and present the current trends of research in this field.

Experimental Studies Concerning the Semipermeable Membrane Separation Efficiency for 134Cs, 137Cs, 57Co, 58Co, 60Co, 54Mn in Liquid Radioactive Waste I. Treatment of secondary waste from POD decontamination procedure

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Mirela Dulama ◽  
Nicoleta Deneanu ◽  
Cristian Dulama ◽  
Margarit Pavelescu
Keyword(s):  
Membrane Separation ◽  
Separation Efficiency ◽  
Liquid Radioactive Waste ◽  
Experimental Studies ◽  
Experimental Tests ◽  
Suspended Solid ◽  
Process Efficiency ◽  
Active Charcoal ◽  
Precipitation Process ◽  
Pre Treatment

The paper presents the experimental tests concerning the treatment by membrane techniques of radioactive aqueous waste. Solutions, which have been treated by using the bench-scale installation, were radioactive simulated secondary wastes from the decontamination process with modified POD. Generally, an increasing of the retention is observed for most of the contaminants in the reverse osmosis experiments with pre-treatment steps. The main reason for taking a chemical treatment approach was to selectively remove soluble contaminants from the waste. In the optimization part of the precipitation step, several precipitation processes were compared. Based on this comparison, mixed [Fe(CN)6]4-/Al3+/Fe2+ was selected as a precipitation process applicable for precipitation of radionuclides and flocculation of suspended solid. Increased efficiencies for cesium radionuclides removal were obtained in natural zeolite adsorption pre-treatment stages and this was due to the fact that volcanic tuff used has a special affinity for this element. Usually, the addition of powdered active charcoal serves as an advanced purifying method used to remove organic compounds and residual radionuclides; thus by analyzing the experimental data (for POD wastes) one can observe a decreasing of about 50% for cobalt isotopes subsequently to the active charcoal adsorption.. The semipermeable membranes were used, which were prepared by the researchers from the Research Center for Macromolecular Materials and Membranes, Bucharest. The process efficiency was monitored by gamma spectrometry.

Low-pressure membrane filtration with unconventional coagulation regimes

2005 ◽  
Vol 5 (5) ◽  
pp. 1-8 ◽  
Author(s):  
K.Y. Choi ◽  
B.A. Dempsey
Keyword(s):  
Activated Carbon ◽  
Membrane Filtration ◽  
Membrane Surface ◽  
Cross Flow ◽  
Chemical Cleaning ◽  
Sand Filters ◽  
Charge Neutralization ◽  
Floc Size ◽  
Filtration System ◽  
Pre Treatment

The objective of the research was to evaluate in-line coagulation to improve performance during ultrafiltration (UF). In-line coagulation means use of coagulants without removal of coagulated solids prior to UF. Performance was evaluated by removal of contaminants (water quality) and by resistance to filtration and recovery of flux after hydraulic or chemical cleaning (water production). We hypothesized that coagulation conditions inappropriate for conventional treatment, in particular under-dosing conditions that produce particles that neither settle nor are removed in rapid sand filters, would be effective for in-line coagulation prior to UF. A variety of pre-treatment processes for UF have been investigated including coagulation, powdered activated carbon (PAC) or granular activated carbon (GAC), adsorption on iron oxides or other pre-formed settleable solid phases, or ozonation. Coagulation pre-treatment is often used for removal of fouling substances prior to NF or RO. It has been reported that effective conventional coagulation conditions produced larger particles and this reduced fouling during membrane filtration by reducing adsorption in membrane pores, increasing cake porosity, and increasing transport of foulants away from the membrane surface. However, aggregates produced under sweep floc conditions were more compressible than for charge neutralization conditions, resulting in compaction when the membrane filtration system was pressurized. It was known that the coagulated suspension under either charge-neutralization or sweep floc condition showed similar steady-state flux under the cross-flow microfiltration mode. Another report on the concept of critical floc size suggested that flocs need to reach a certain critical size before MF, otherwise membranes can be irreversibly clogged by the coagulant solids. The authors were motivated to study the effect of various coagulation conditions on the performance of a membrane filtration system.

scholarly journals Comparative environmental impact evaluation using life cycle assessment approach: a case study of integrated membrane-filtration system for the treatment of aerobically-digested palm oil mill effluent

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Yeit Haan Teow ◽  
Meng Teck Chong ◽  
Kah Chun Ho ◽  
Abdul Wahab Mohammad
Keyword(s):  
Activated Carbon ◽  
Life Cycle ◽  
Palm Oil ◽  
Membrane Filtration ◽  
Electricity Consumption ◽  
Sand Filters ◽  
Unit Operations ◽  
Filtration System ◽  
Pre Treatment ◽  
Aerobically Digested

AbstractAiming to mitigate wastewater pollution arising from the palm oil industry, this university-industry research-and-development project focused on the integration of serial treatment processes, including the use of moving bed biofilm reactor (MBBR), pre-treatment with sand filters and activated carbon filters, and membrane technology for aerobically-digested palm oil mill effluent (POME) treatment. To assess the potential of this sustainable alternative practice in the industry, the developed technology was demonstrated in a pilot-scale facility: four combinations (Combinations I to IV) of unit operations were developed in an integrated membrane-filtration system. Combination I includes a MBBR, pre-treatment unit comprising sand filters and activated carbon filters, ultrafiltration (UF) membrane, and reverse osmosis (RO) membrane, while Combination II excludes MBBR, Combination III excludes UF membrane, and Combination IV excludes both MBBR and UF membrane. Life cycle assessment (LCA) was performed to evaluate potential environmental impacts arising from each combination while achieving the goal of obtaining recycled and reusable water from the aerobically-digested POME treatment. It is reported that electricity consumption is the predominant factor contributing to most of those categories (50–77%) as the emissions of carbon dioxide (CO2), sulfur dioxide (SO2), nitrogen oxides, and volatile mercury during the combustion of fossil fuels. Combination I in the integrated membrane-filtration system with all unit operations incurring high electricity consumption (52 MJ) contributed to the greatest environmental impact. Electricity consumption registers the highest impact towards all life cycle impact categories: 73% on climate change, 80% on terrestrial acidification, 51% on eutrophication, and 43% on human toxicity. Conversely, Combination IV is the most environmentally-friendly process, since it involves only two-unit operations – pre-treatment unit (comprising sand filters and activated carbon filters) and RO membrane unit – and thus incurs the least electricity consumption (41.6 MJ). The LCA offers insights into each combination of the operating process and facilitates both researchers and the industry towards sustainable production.

Separation of Heavy Metal Ions from the Solution Obtained by Leaching Low-Grade Pyrolusite with Pyrite and H2SO4

2013 ◽  
Vol 773 ◽  
pp. 283-288
Author(s):  
Xing Zou ◽  
Xiang Quan Chen ◽  
Hai Chao Xie ◽  
Xiao Dan Qiu
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Separation Efficiency ◽  
Ph Value ◽  
Sulfate Solution ◽  
Ion Concentration ◽  
Manganese Sulfate ◽  
Low Grade ◽  
High Concentration

The manganese sulfate solution leached from low-grade pyrolusite with pyrite and H2SO4 contains heavy metal ions of high concentration, influencing the quality of the final products of manganese compounds and causing manganese ions not to be electrolyzed. The present study was focused on the separation of Co, Ni and Zn ions from the leached solution with BaS. By controlling the pH value at 5.0-6.5, temperature at 50-60°C, reaction time at 15 min and mixing velocity at 78 rpm, the heavy metal ions could be separated effectively. Under the above optimized conditions, the ion concentration of Co, Ni, and Zn in the solution was reduced to 0.06 mg.L-1, 0.27mg.L-1 and 0.01mg.L-1, and the separation efficiency was 99.72%, 99.18% and 99.9% respectively. The obtained pure solution meets the demands of manganese electrowinning.

scholarly journals Removal of Organic Compounds with an Amino Group during the Nanofiltration Process

Membranes ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 58
Author(s):  
Renata Żyłła ◽  
Magdalena Foszpańczyk ◽  
Magdalena Olak-Kucharczyk ◽  
Joanna Marszałek ◽  
Stanisław Ledakowicz
Keyword(s):  
Organic Compounds ◽  
Natural Organic Matter ◽  
Oxidation Product ◽  
Membrane Filtration ◽  
Separation Efficiency ◽  
Ph Value ◽  
Oxidation Products ◽  
Low Molecular Weight ◽  
Amino Group ◽  
Amino Groups

The research covered the process of nanofiltration of low molecular weight organic compounds in aqueous solution. The article presents the results of experiments on membrane filtration of compounds containing amino groups in the aromatic ring and comparing them with the results for compounds without amino groups. The research was carried out for several commercial polymer membranes: HL, TS40, TS80, DL from various manufacturers. It has been shown that the presence of the amino group and its position in relation to the carboxyl group in the molecule affects the retention in the nanofiltration process. The research also included the oxidation products of selected pharmaceuticals. It has been shown that 4-Amino-3,5-dichlorophenol—a oxidation product of diclofenac and 4-ethylbenzaldehyde—a oxidation product of IBU, show poor separation efficiency on the selected commercial membranes, regardless of the pH value and the presence of natural organic matter (NOM). It has been shown that pre-ozonation of natural river water can improve the retention of pollutants removed.

scholarly journals Recent Advances in Enzymes for the Bioremediation of Pollutants

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Seyyed Mojtaba Mousavi ◽  
Seyyed Alireza Hashemi ◽  
Seyed Mohammad Iman Moezzi ◽  
Navid Ravan ◽  
Ahmad Gholami ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Azo Dyes ◽  
Membrane Filtration ◽  
Cost Effective ◽  
Physicochemical Characteristics ◽  
Pollutant Removal ◽  
Inorganic Pollutants ◽  
Environment Friendly ◽  
Different Types ◽  
Biological Methods

Nowadays, pollution of the environment is a huge problem for humans and other organisms’ health. Conventional methods of pollutant removal like membrane filtration or ion exchange are not efficient enough to lower the number of pollutants to standard levels. Biological methods, because of their higher efficiency and biocompatibility, are preferred for the remediation of pollutants. These cost-effective and environment-friendly methods of reducing pollutants are called bioremediation. In bioremediation methods, enzymes play the most crucial role. Enzymes can remedy different types of organic and inorganic pollutants, including PAHs, azo dyes, polymers, organocyanides, lead, chromium, and mercury. Different enzymes isolated from various species have been used for the bioremediation of pollutants. Discovering new enzymes and new subtypes with specific physicochemical characteristics would be a promising way to find more efficient and cost-effective tools for the remediation of pollutants.

Characteristics of coagulation-flocculation of humic acid with effective performance of polymeric flocculant and inorganic coagulant

2003 ◽  
Vol 47 (1) ◽  
pp. 89-95 ◽  
Author(s):  
J. Yu ◽  
D.D. Sun ◽  
J.H. Tay
Keyword(s):  
Humic Acid ◽  
Membrane Fouling ◽  
Membrane Filtration ◽  
Molecular Size ◽  
Aluminium Sulphate ◽  
Fouling Control ◽  
Effective Performance ◽  
Water And Wastewater ◽  
Pre Treatment ◽  
Flocculation Process

Ferric chloride and aluminium sulphate as coagulants and positive charged flocculants PDDMAC ((PDDMAC = poly (diallyldimethylammonium chloride) were used for pre-treatment of water and wastewater for removing humic substance prior to RO membrane filtration. It was found that a combination of flocculant and coagulant enhanced the coagulation-flocculation process and humic acid removal. The optimum conditions of coagulation-flocculation were established in reference to the ratio of humic acid and coagulant. Zeta potential and the ratio of E4/E6 were investigated to explore the possible micro-mechanisms of coagulation-flocculation. The ratios of E4/E6 show the molecular size variations using different coagulants and flocculants, which are expected to benefit membrane-fouling control.

scholarly journals Oily Wastewater Treatment Using Polyamide Thin Film Composite Membrane Technology

Membranes ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 84 ◽  
Author(s):  
Sarah Elhady ◽  
Mohamed Bassyouni ◽  
Ramadan A. Mansour ◽  
Medhat H. Elzahar ◽  
Shereen Abdel-Hamid ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Membrane Filtration ◽  
Edible Oil ◽  
Oily Wastewater ◽  
Permeate Flux ◽  
Treatment Unit ◽  
Thin Film Composite ◽  
Ro Membrane ◽  
Pre Treatment ◽  
Oil Wastewater

In this study, polyamide (PA) thin film composite (TFC) reverse osmosis (RO) membrane filtration was used in edible oil wastewater emulsion treatment. The PA-TFC membrane was characterized using mechanical, thermal, chemical, and physical tests. Surface morphology and cross-sections of TFCs were characterized using SEM. The effects of edible oil concentrations, average droplets size, and contact angle on separation efficiency and flux were studied in detail. Purification performance was enhanced using activated carbon as a pre-treatment unit. The performance of the RO unit was assessed by chemical oxygen demand (COD) removal and permeate flux. Oil concentration in wastewater varied between 3000 mg/L and 6000 mg/L. Oily wastewater showed a higher contact angle (62.9°) than de-ionized water (33°). Experimental results showed that the presence of activated carbon increases the permeation COD removal from 94% to 99%. The RO membrane filtration coupled with an activated carbon unit of oily wastewater is a convenient hybrid technique for removal of high-concentration edible oil wastewater emulsion up to 99%. Using activated carbon as an adsorption pre-treatment unit improved the permeate flux from 34 L/m2hr to 75 L/m2hr.

scholarly journals Selective Flotation of Pyrite from Arsenopyrite by Low Temperature Oxygen Plasma Pre-Treatment

Minerals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 568 ◽  
Author(s):  
Jincheng Ran ◽  
Xianyang Qiu ◽  
Zhen Hu ◽  
Quanjun Liu ◽  
Baoxu Song
Keyword(s):  
Low Temperature ◽  
Oxygen Plasma ◽  
Separation Efficiency ◽  
Plasma Modification ◽  
Xps Analysis ◽  
Pyrite Surface ◽  
Oxidation Degree ◽  
Selective Flotation ◽  
Icp Ms ◽  
Pre Treatment

In this study, the surface modification of arsenopyrite and pyrite with low temperature oxygen plasma was developed as an effective approach to improve the flotation separation efficiency of minerals. The micro-flotation experiments results indicated that plasma pre-treatment can achieve selective flotation of arsenopyrite from pyrite. The XPS analysis results indicated that the oxidation degree of plasma-modification arsenopyrite surface is much higher than that of pyrite. A large number of sulfide components on the surface of the mineral were oxidized to highly-valence hydrophilic oxides by plasma pre-treatment. ICP-MS analysis results revealed that the dissolution rate was determined by the oxidation degree of minerals and plasma modified accelerated the dissolution of arsenopyrite and pyrite. Zeta potential determination results confirmed that plasma can keep a relatively higher adsorption of SBX on the pyrite surface but inhibit the adsorption of collector onto the arsenopyrite surface.

Sign in / Sign up

Export Citation Format

Share Document