scholarly journals Probiotic Lactobacillus sp. with bioremediation potential of toxic heavy metals

2018 ◽  
Vol 34 (1) ◽  
pp. 43-46 ◽  
Author(s):  
Sangita Ahmed ◽  
Md Rafiqul Islam ◽  
Jannatul Ferdousi ◽  
Tabassum Samia Iqbal
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Industrial Development ◽  
Biochemical Properties ◽  
Low Ph ◽  
Drug Resistant ◽  
Toxic Heavy Metals ◽  
Human Gut ◽  
Probiotic Lactobacillus ◽  
Lactobacillus Spp

Pollution of the environment and food with toxic heavy metals is being intensified in Bangladesh with industrial development. Consumption of foods and water contaminated with heavy metals imposes threat to human health. Aiming to find a solution to this problem, the present study focuses on probiotic Lactobacillus spp. with potential to remove heavy metals from environment as well as human body. A total of three Lactobacillus spp were isolated from curd samples and were identified based on their morphological and biochemical properties. These isolates were tolerant to low pH and bile salt which aids in their application in human gut. All isolates could tolerate 600 ppm chromium, 400 ppm lead, 400 ppm copper and 400 ppm zinc. The heavy metal tolerant Lactobacillus spp were also multi drug resistant and showed 100% resistance to Azithromycin, Cloxacillin, Gentamicin, Vancomycin, Streptomycin, Nalidixic acid, Trimethoprim-Sulfamethoxazole and Penicillin, while 100% sensitivity was observed to Imipenem. Bangladesh J Microbiol, Volume 34 Number 1 June 2017, pp 43-46

scholarly journals Heavy Metal Tolerance and Antibiotic Resistance of Bacillus spp. Isolated from Two Major Rivers in Bangladesh

2016 ◽  
Vol 30 (1-2) ◽  
pp. 17-22 ◽  
Author(s):  
Tahmina Shammi ◽  
Sangita Ahmed
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Antibiotic Resistance ◽  
Biochemical Analysis ◽  
Metal Tolerance ◽  
Heavy Metal Tolerance ◽  
Drug Resistant ◽  
Toxic Heavy Metals ◽  
The World ◽  
Bacillus Spp

Pollution of the environment with toxic heavy metals is spreading throughout the world along with industrial progress. Removal of these toxic heavy metals by using bacteria has achieved growing attention in recent years. The present study focuses on isolation of lead and chromium tolerant Bacillus spp., from the Buriganga and the Shitalkhya, the two major rivers surrounding Dhaka. A total of 25 Bacillus spp. isolates tolerant to 50 ppm lead and chromium were preliminarily identified based on morphological and biochemical analysis. Further investigation revealed that all isolates were also able to grow at 1000 ppm lead and 400 ppm chromium, while tolerance to 1500 ppm lead and 500 ppm chromium was observed among 48% and 76% isolates, respectively. All isolates were also able to grow at 50 ppm copper and 50 ppm zinc, while 72% grew at 100 ppm copper. The heavy metal tolerant Bacillus spp were also multi drug resistant and showed resistance to Tetracycline (100%), Ceftazidime (100%), Ceftriaxone (100%), Ampicillin (28%) and Nalidixic acid (24%).Bangladesh J Microbiol, Volume 30, Number 1-2,June-Dec 2013, pp 17-22

ASSESSMENT OF HEAVY METAL CONCENTRATION IN COCONUT WATER

1970 ◽  
pp. 07-10
Author(s):  
MdDidarul Islam, Ashiqur Rahaman, Aboni Afrose
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Concentration ◽  
Coconut Water ◽  
Toxic Heavy Metals ◽  
High Concentration ◽  
Toxic Heavy Metal ◽  
Low Concentration ◽  
Wet Ashing ◽  
Aas Method

This study was based on determining concentration of essential and toxic heavy metal in coconut water available at a local Hazaribagh area in Dhaka, Bangladesh. All essential minerals, if present in the drinking water at high concentration or very low concentration, it has negative actions. In this study, fifteen samples and eight heavy metals were analyzed by Atomic Absorption Spectroscopy (AAS) method which was followed by wet ashing digestion method. The concentration obtained in mg/l were in the range of 0.3 to 1.5, 7.77 to 21.2, 0 to 0.71, 0 to 0.9, 0 to 0.2, 0.9 to 17.3, 0.1 to 0.9, 0 to 0.9 and 0 to 0.7 for Fe, Ni, Cu, Cd, Cr, Zn, Pb and Se respectively. From this data it was concluded that any toxic heavy metals like Cd, Cr, Pb and Ni exceed their toxicity level and some essential nutrients were in low concentration in those samples. 

scholarly journals Heavy metal composition of maize and tomato grown on contaminated soils

2018 ◽  
Vol 3 (1) ◽  
pp. 414-426
Author(s):  
A.O. Adekiya ◽  
A.P. Oloruntoba ◽  
S.O. Ojeniyi ◽  
B.S. Ewulo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Heavy Metal Contamination ◽  
Mining Area ◽  
Atomic Absorption Spectrophotometry ◽  
Toxic Heavy Metals ◽  
Mining Site ◽  
Solanum Lycopersicum L ◽  
Sources Of Pollution

Abstract The study investigated the level of heavy metal contamination in plants {maize (Zea mays) and tomato (Solanum lycopersicum L.)} from thirty soil samples of three locations (Epe, Igun and Ijana) in the Ilesha gold mining area, Osun State, Nigeria. Total concentrations of As, Cd, Co, Cr, Cu, Ni, Pb and Zn were determined using atomic absorption spectrophotometry. Spatial variations were observed for all metals across the locations which was adduced to pH and the clay contents of the soils of each location. The results showed that heavy metals are more concentrated in the areas that are closer to the mining site and the concentrations in soil and plants (maize and tomato) decreased with increasing perpendicular distance from the mining site, indicating that the gold mine was the main sources of pollution. The mean concentrations of heavy metals in plants (tomato and maize) samples were considered to be contaminated as As, Cd and Pb respectively ranged from 0.6 - 2.04 mg kg-1, 0.8 - 5.2 mg kg-1, 0.8 - 3.04 mg kg-1 for tomato and respectively 0.60 - 2.00 mg kg-1, 1.50 - 4.60 mg kg-1 and 0.90 - 2.50 mg kg-1 for maize. These levels exceeded the maximum permissible limits set by FAO/WHO for vegetables. In conclusion, monitoring of crops for toxic heavy metals is essential for food safety in Nigeria.

scholarly journals Metalliferous content of drinking water and sediments in storage tanks of some schools in Erbil city, Iraq

2020 ◽  
Vol 9 (3) ◽  
Author(s):  
Hawraz Sami Khalid ◽  
Hoshyar Saadi Ali ◽  
Dhary Almashhadany
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Heavy Metal ◽  
Drinking Water ◽  
Water Samples ◽  
World Health ◽  
Storage Tanks ◽  
Quality Indices ◽  
Toxic Heavy Metals ◽  
Water Quality Indices

The present study was conducted to evaluate the quality of drinking water in randomly selected schools in Erbil city, Kurdistan Region, Iraq. The water quality indices such as the Heavy metal Pollution Index (HPI) and Heavy metal Evaluation Index (HEI) were applied to characterize water quality. Eighteen schools were incorporated and sampled for their water storage tanks available to students. Water samples and sediment samples from tanks floor were analyzed by Inductively Coupled Plasma Optical Emission Spectrometer for the determination of twenty-two metal elements. In drinking water samples, all detected metals did not exceed the permissible limits of the World Health Organization. The results of this study showed that the average values of HPI and HEI for As, Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn were 54.442 and 0.221, respectively. According to data of the water quality indices, the schools drinking water quality are good and suitable for drinking in terms of heavy metals. However, sediments samples contained high concentrations of all elements including the toxic heavy metals (As, Cd, Cr, and Pb). Re-suspension of sediments into water column after refilling storage tanks can pose a serious threat to students drinking water from such vessels. It is therefore recommended that proper storage tanks are provided to the schools accompanied by continuous sanitation and hygiene practice to mitigate the corrosion of tanks to avoid health risks of toxic metal

scholarly journals Spatial distribution of heavy metals in surface sediments of Kalametiya Lagoon in southern Sri Lanka; insight towards pollution status and socio-economic interactions

2021 ◽  
Author(s):  
Sunanda Kodikara ◽  
Hossein Tiemoory ◽  
Mangala Chathura De Silva ◽  
Pathmasiri Ranasinghe ◽  
Sudarshana Somasiri ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Spatial Distribution ◽  
Sri Lanka ◽  
Suspended Sediments ◽  
Potential Effect ◽  
Toxic Heavy Metals ◽  
Threshold Effect Level ◽  
Effect Level ◽  
Economic Interactions

Abstract Heavy metal (HM) pollution has become a serious threat to coastal aquatic ecosystems. This study, therefore, aimed at assessing the spatial distribution of selected heavy metals/metalloids including Arsenic (As), Cadmium (Cd), Chromium (Cr), Lead (Pb), and Mercury (Hg) in surface sediment (0–15 cm) samples collected across Kalametiya Lagoon in southern Sri Lanka. Forty-one (41) grid points of the lagoon were sampled and the sediment samples were analyzed for HM content by using ICP-MS. A questionnaire survey was carried out to investigate the possible sources for HM pollution in Kalametiya Lagoon. Water pH and salinity showed significant variation across the lagoon. Overall mean value of pH and salinity were 6.68 ± 0.17 and 2.9 ± 2.2 PSU respectively. The spatial distribution of the heavy metals was not monotonic and showed a highly spatial variation. The kernel density maps of the measured heavy metals demarcated several different areas of the lagoon. The mean contents of As, Cd, Cr, Hg, and Pb were lower than that of threshold effect level (TEL) however, higher for Hg at the North Inlet. Nevertheless, it was still lower than potential effect level (PEL). Socio-economic interactions have dramatically reduced during the past two decades. Industrial sewage, river suspended sediments and agrochemicals such as fertilizers, pesticides were reportedly identified as the possible sources for heavy metal loads. Accumulation of toxic heavy metals can be minimized by detouring the water inflow to the lagoon.

scholarly journals Heavy Metals Removal from Water by Efficient Adsorbents

Water ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 2659
Author(s):  
Muhammad Zaim Anaqi Zaimee ◽  
Mohd Sani Sarjadi ◽  
Md Lutfor Rahman
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Water Treatment ◽  
Adsorption Process ◽  
Natural Occurrence ◽  
Toxic Heavy Metals ◽  
Major Purpose ◽  
Treatment Methods ◽  
Metals Removal ◽  
Harmful Effects

Natural occurrence and anthropogenic practices contribute to the release of pollutants, specifically heavy metals, in water over the years. Therefore, this leads to a demand of proper water treatment to minimize the harmful effects of the toxic heavy metals in water, so that a supply of clean water can be distributed into the environment or household. This review highlights several water treatment methods that can be used in removing heavy metal from water. Among various treatment methods, the adsorption process is considered as one of the highly effective treatments of heavy metals and the functionalization of adsorbents can fully enhance the adsorption process. Therefore, four classes of adsorbent sources are highlighted: polymeric, natural mineral, industrial by-product, and carbon nanomaterial adsorbent. The major purpose of this review is to gather up-to-date information on research and development on various adsorbents in the treatment of heavy metal from water by emphasizing the adsorption capability, effect of pH, isotherm and kinetic model, removal efficiency and the contact of time of every adsorbent.

scholarly journals Determination of heavy metals and selenium content in chicken liver at Erbil city, Iraq

2020 ◽  
Vol 9 (3) ◽  
Author(s):  
Hoshyar Saadi Ali ◽  
Dhary Alewy Almashhadany ◽  
Hawraz Sami Khalid
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Inductively Coupled Plasma ◽  
Heavy Metal Contamination ◽  
Optical Emission ◽  
Critical Issue ◽  
Chicken Liver ◽  
Poultry Meat ◽  
Emission Spectrometry ◽  
Toxic Heavy Metals

Heavy metal contamination of poultry meat is a critical issue for human health due to associated risks of cytotoxicity and systemic pathologies after ingestion of such metals. A total of twenty chicken liver samples were collected from markets of Erbil city and analyzed for ten heavy metals contents by Inductively Coupled Plasma Optical Emission Spectrometry. The targeted metals were cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), mercury (Hg), zinc (Zn) and selenium (Se). The average concentrations (mg/kg) of targeted trace elements were 0.06±0.027, 0.06±0.05, 2.05±0.34, 1.85±0.47, 0.15±0.17, and 33.53±5.24 for Co, Cr, Cu, Mn, Ni, and Zn respectively. Copper (Cu) levels significantly exceeded the maximum permissible limit of WHO. Moreover, the average concentrations of toxic heavy metals and selenium were 0.07±0.037, 0.278±0.10, 0.11±0.083, and 2.01±0.454 mg/kg for Cd, Pb, Hg, and Se respectively. Hg and Pb levels exceeded the permissible limits of WHO. Higher levels of Cu and Hg in poultry may pose a serious threat to consumers which demand countermeasures and precautions to be taken. Iraqi Standards Authority and relevant official institutions are strongly recommended to regulate safe disposal of heavy metal waste in the environment to reduce animal exposure to such metals.

scholarly journals Advances in heavy metal removal by sulfate-reducing bacteria

2020 ◽  
Vol 81 (9) ◽  
pp. 1797-1827 ◽  
Author(s):  
Ya-Nan Xu ◽  
Yinguang Chen
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Industrial Development ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Sulfate Reducing Bacteria ◽  
Sulfate Reducing ◽  
Recent Advances ◽  
Conventional Methods ◽  
Reducing Bacteria

Abstract Industrial development has led to generation of large volumes of wastewater containing heavy metals, which need to be removed before the wastewater is released into the environment. Chemical and electrochemical methods are traditionally applied to treat this type of wastewater. These conventional methods have several shortcomings, such as secondary pollution and cost. Bioprocesses are gradually gaining popularity because of their high selectivities, low costs, and reduced environmental pollution. Removal of heavy metals by sulfate-reducing bacteria (SRB) is an economical and effective alternative to conventional methods. The limitations of and advances in SRB activity have not been comprehensively reviewed. In this paper, recent advances from laboratory studies in heavy metal removal by SRB were reported. Firstly, the mechanism of heavy metal removal by SRB is introduced. Then, the factors affecting microbial activity and metal removal efficiency are elucidated and discussed in detail. In addition, recent advances in selection of an electron donor, enhancement of SRB activity, and improvement of SRB tolerance to heavy metals are reviewed. Furthermore, key points for future studies of the SRB process are proposed.

Batch and column tests for the development of an immobilization technology for toxic heavy metals in contaminated soils of closed mines

1998 ◽  
Vol 37 (8) ◽  
pp. 81-88 ◽  
Author(s):  
A. Jang ◽  
Y. S. Choi ◽  
In S. Kim
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Contaminated Soils ◽  
Mine Drainage ◽  
Fine Sand ◽  
Design Parameters ◽  
Batch Adsorption ◽  
Toxic Heavy Metals ◽  
Chemical Additives ◽  
Column Tests

Laboratory tests of various chemical treatments for the immobilization of copper, nickel, and lead in soils typically found at mine facilities were evaluated. A series of batch, adsorption tests, and lab-scale continuous column tests were conducted to optimize the design parameters for the full-scale immobilization processes. The laboratory test program consisted of batch and column experiments to measure the leachability and subsequent immobilization of the single heavy metal, Cu2+, Pb2+, and Ni2+ in an artificial soil which was composed of bentonite and quartz fine sand. Batch equilibrium methods were used to test the ability of a large number of chemical additives to react with heavy metals in contaminated soil. The two best treatment chemicals (CaO and Na2S) for each soil-metal combination were selected for more detailed columns studies. The column tests were carried out in the acidic pH range. According to the results of the column leaching test, it was found that the degree of heavy metal leaching is highly dependent on pH. An adsorption test was performed under acidic conditions (pH 4) to evaluate bentonite as an additive to treat acid mine drainage (AMD).

scholarly journals Bioremediation of Chromium by Microorganisms and Its Mechanisms Related to Functional Groups

2021 ◽  
Vol 2021 ◽  
pp. 1-21
Author(s):  
Abate Ayele ◽  
Yakob Godebo Godeto
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Ions ◽  
Functional Groups ◽  
Heavy Metal Ions ◽  
Future Research ◽  
Oil Well ◽  
Toxic Heavy Metals ◽  
Toxic Heavy Metal ◽  
Minimum Concentration

Heavy metals generated mainly through many anthropogenic processes, and some natural processes have been a great environmental challenge and continued to be the concern of many researchers and environmental scientists. This is mainly due to their highest toxicity even at a minimum concentration as they are nonbiodegradable and can persist in the aquatic and terrestrial environments for long periods. Chromium ions, especially hexavalent ions (Cr(VI)) generated through the different industrial process such as tanneries, metallurgical, petroleum, refractory, oil well drilling, electroplating, mining, textile, pulp and paper industries, are among toxic heavy metal ions, which pose toxic effects to human, plants, microorganisms, and aquatic lives. This review work is aimed at biosorption of hexavalent chromium (Cr(VI)) through microbial biomass, mainly bacteria, fungi, and microalgae, factors influencing the biosorption of chromium by microorganisms and the mechanism involved in the remediation process and the functional groups participated in the uptake of toxic Cr(VI) from contaminated environments by biosorbents. The biosorption process is relatively more advantageous over conventional remediation technique as it is rapid, economical, requires minimal preparatory steps, efficient, needs no toxic chemicals, and allows regeneration of biosorbent at the end of the process. Also, the presence of multiple functional groups in microbial cell surfaces and more active binding sites allow easy uptake and binding of a greater number of toxic heavy metal ions from polluted samples. This could be useful in creating new insights into the development and advancement of future technologies for future research on the bioremediation of toxic heavy metals at the industrial scale.

Sign in / Sign up

Export Citation Format

Share Document