scholarly journals Rock Types Classification and Distribution on Anabanua Village, Barru Regency, South Sulawesi

2020 ◽  
Vol 8 (1) ◽  
pp. 1-8
Author(s):  
Muhammad Resky Ariansyah ◽  
Muhammad Fawzy Ismullah Massinai ◽  
Muhammad Altin Massinai

Anabanua Village, Barru Regency is one of the areas in South Sulawesi that has quite unique geological conditions. This condition inseparably comes from the complicated geological process that took place during the formation of the island, Sulawesi. In Anabanua Village, there are many types of rocks such as sedimentary rocks, metamorphic rocks and igneous rocks. This paper aims to map and classify the types of rock by taking samples on different places in the research area. Then we observe the samples physical properties. The results showed, from taking 10 rock samples in different places, they have various characteristics. 8 of them were sedimentary rocks, they are Limestone Quartz, Limestone Sand, Shale, Sandstone, Coal, Limestone Bioturbation, Breccia, and Chert Stone. The other 2 samples were metamorphic rocks, they are Greenschist and Quartzite.

2007 ◽  
Vol 40 (4) ◽  
pp. 1768 ◽  
Author(s):  
H. M. Dierckx ◽  
B. Tsikouras

The Minoans of East Crete used a variety of igneous and metamorphic rocks as stone implements. These were probably procured in dry riverbeds and beaches located in a region along the Bay of Mirabello or from an onlap conglomerate, which geologically dominates that region and contains rock types of igneous, metamorphic and sedimentary origin. Several rock samples were collected for pétrographie investigation to examine and confirm the source for the igneous rocks. Detailed pétrographie description of natural samples provides the identification of the rocks employed by Minoans and confirms the source of their origin. Apparently the Minoans were able to evaluate the hardness of the stones procured according to the desirable usage and their expected fatigue, thus avoiding unnecessary timeconsuming treatment. The identification of the variable lithotypes used for these implements and the verification of their source regions reveal the time it took to procure the raw materials as well as the time period during which the rocks were employed.


Author(s):  
Anthony S. R. Juo ◽  
Kathrin Franzluebbers

Soils are weathering products of rocks and minerals. The rocks in Earth’s outer surface can be classified as igneous, sedimentary, or metamorphic rocks. Igneous rocks are formed from molten magma. They are composed of primary minerals, which are minerals that have not been altered chemically since they formed as molten lava solidified. Examples of primary minerals are the light-colored minerals quartz, muscovite, feldspars, and orthoclase, and the dark-colored minerals biotite, augite, and hornblende. In general, dark-colored minerals contain iron (Fe) and magnesium (Mg) and are more easily weathered than light-colored minerals. Coarse-grained igneous rocks, such as granite and diorite, contain mainly lightcolored minerals, while medium-grained igneous rocks such as gabbro, peridotite, and hornblendite are composed of dark-colored primary minerals. Rhyolite and andesite are medium-grained igneous rocks containing light-colored primary minerals. Basalt is dark-colored with an intermediate to fine rock texture, and basaltic volcanic glass has a fine texture. Examples of light-colored igneous rocks with a fine texture are felsite and obsidian. Sedimentary rocks are the most common type of rock, covering about 75% of Earth’s land surface. They are mainly composed of secondary minerals, which are minerals that are recrystallized products of the chemical breakdown and/or alteration of primary minerals. Sedimentary rocks form when weathering products from rocks are cemented or compacted. For example, quartz (SiO2) sand, a weathering product of granite, may become cemented into sandstone. Another common sedimentary rock is limestone. There are two types of limestone, namely, calcite (CaCO3), and dolomite (CaCO3.MgCO3). Clays may become cemented into a sedimentary rock, which is known as shale. A sedimentary rock with several dominant minerals is called a conglomerate, in which small stones with different mineralogy are cemented together. Metamorphic rocks are formed by the metamorphism of igneous or sedimentary rocks. Great pressure and high temperatures, caused by the shifting of continental plates, can compress, distort, and/or partially re-melt the original rocks. Igneous rocks are commonly modified to form schist and gneiss, in which light and dark minerals have been reoriented into bands. Sedimentary rocks, such as limestone and shale, may be metamorphosed to form marble and slate, respectively.


1959 ◽  
Vol 96 (6) ◽  
pp. 473-481 ◽  
Author(s):  
Derek Flinn

AbstractIn a recent account of the geology of North-east Shetland (Flinn, 1958, Quart. Jour. Geol. Soc.) two nappes of crystalline rocks lying one above the other on a base of meta-sedimentary rocks were recognised. Comparison with the Norwegian geological literature followed by field investigations in Norway has shown many similarities with the Jotunheim area of Norway. In both areas two relatively rigid nappes were thrust one after the other over the surface of the earth to their present positions. In both areas the lower of the two nappes was emplaced first and was subjected to erosion giving rise to sediments which were deposited on the nappes (Phyllite Group of Shetland and the Valdres Sparagmites of Norway). These sedimentary groups had a similar history of formation, deformation, and metamorphism, but differed somewhat in materials because the source rocks were different, although several strikingly similar rock types are present as pebbles in both areas. The remains of the first nappe and the newly deposited sediments were overrun by the second nappe in both areas. The emplacement of these nappes gave rise to considerable deformation and metamorphism in the underlying rocks. If the metamorphic rocks of Shetland are of Caledonian age, as seems likely, then it is possible that the Valdres Sparagmites and the Phyllite Group are stratigraphically equivalent: they are certainly tectonically equivalent.


1942 ◽  
Vol 32 (4) ◽  
pp. 373-388
Author(s):  
R. Hart

Discussion and SummaryThere are many areas throughout Britain where soil parent materials cannot be differentiated on the basis of solid geology alone, and difficulties are frequently experienced in classifying and mapping the soils. The object of this investigation was to study the parent materials and soils in a complex area of this kind.The area selected is in north-east Scotland, and about half of it is covered by acid igneous and metamorphic rocks and the rest by sedimentary rocks of Old Red Sandstone age. The geology is complicated by three glaciations giving rise to diverse soil parent materials.Five main groups of parent materials have been recognized, based on origin, texture and mineralogical composition. The first group consists of drift derived from acid igneous rocks and schists; the second of boulder clay from similar material plus an admixture of sedimentary rocks; the third of fluvioglacial deposits of varied textures; the fourth of conglomerate or thin drift from Old Red Sandstone rocks; and the fifth of boulder clay derived from Old Red Sandstone rocks where the influence of marls and shales in the drift is strong. Groups 1 and 5 are of major importance in this region and also elsewhere because of their widespread distribution. The others are more local.


Author(s):  
Jiří Zimák

Natural radioactive elements (potassium, uranium and thorium) abundances were measured in 769 samples of metamorphic and igneous rocks and pre-Cenozoic sedimentary rocks from all geological units on the map sheet 15-11 Zlaté Hory, using a laboratory gamma-ray spectrometer. Metamorphic rocks belong to two geological units of the Silesicum: to the Vrbno Group (a volcanosedimentary complex composed mainly of phyllites, quartzites, amphibolites, greenschists, acid to intermediate metavolcanites and their metatuff s) and the Desná Group (metagranites and blastomylonites). Unmetamorphosed pre-Cenozoic sedimentary rocks are represented by three Variscan flysch formations – the Andělská Hora, Horní Benešov, and Moravice Fms. (rocks of the first formation are unmetamorphosed to anchimetamorphosed), only in small areas by Cretaceous sandstones of the Peruc-Korycany Formation and Devonian limestones of the Líšeň Formation. Unmetamorphosed magmatites are represented by granitoids, lamprophyres andmicrogabbro. From calculated values of mass activity of 226Ra equivalent it is evident that natural radioactivity of most of the studied rocks is low. Slightly increased mass activity values were found in feldspar-rich quartzites (186 Bq.kg-1 on average), metakeratophyres (200 Bq.kg-1) and felsic metatuff s (229 Bq.kg-1) of the Vrbno Group.


1893 ◽  
Vol 10 (5) ◽  
pp. 204-210
Author(s):  
T. G. Bonney

A thick mass of bedded schists, as I have described in more than one paper, occupies the highest position among the socalled metamorphic rocks of the Alps. With the exception of some gneisses—so far as I know of a porphyritic character, and almost certainly intrusive granites modified by pressure— and various green schists, which, in part at least, are basic igneous rocks, similarly affected, the group, which may be traced from one end of the chain to the other, consists of altered sediments.


2011 ◽  
Vol 90-93 ◽  
pp. 2025-2032
Author(s):  
Pei Dong Su

The geological setting of Sichuan-Tibet Railway is complicated, while magmatic and metamorphic rocks are widely distributed. Reference to the other engineering experience of underground works under similar geological conditions at home and abroad, the analysis shows that it exists the hazardous possibility that the inorganic gas are toxic and harmful in the tunnels of Sichuan-Tibet Railway. Combining the conditions that inorganic gas produced and the geological conditions along the Sichuan-Tibet Railway, it analyzes and predicates that CH4, CO2, H2S, SO2, CO, NO2, NH3 and H2 are the main types of poisonous gas along the Sichuan-Tibet Railway. The poisonous gas is mainly distributed in the three suture zones, three crustal fault zones and more than three basement fault zones and mafic and ultrabasic rock zone, granites zone, volcanic zone and contact metamorphic zone. All these zones are the favorable migration point to area and gathering area to the toxic and harmful gas. It should be highly mentioned on the construction of the tunnels.


1938 ◽  
Vol 75 (7) ◽  
pp. 296-304 ◽  
Author(s):  
Edwin Sherbon Hills

The occurrence of andalusite and sillimanite in unaltered igneous rocks is, according to the orthodox view expressed in most standard textbooks (see, e.g., Tyrrell, 1934, pp. 50, 164; Shand, 1927, pp. 62, 146; Grout, 1932, p. 230), always to be ascribed to contamination of magmas by highly aluminous sedimentary or metamorphic rocks. Having been given cause to doubt the correctness of this view by the recognition at Pyramid Hill, Victoria, of andalusite-bearing granites and aplites in which evidence of assimilation is lacking, I was then very interested to discover that the opinion has often been expressed, and evidence adduced in support of it, that both andalusite and sillimanite may be normal pyrogenetic constituents of igneous rocks.1 That is, they may under certain conditions crystallize from uncontaminated magmas. Some authors, while admitting that andalusite and sillimanite may crystallize from magmas, regard such pyrogenetic occurrences of these minerals as caused by the development of local excess of alumina, due to the assimilation of shales (e.g. Wells, 1931; Shand, 1927, p. 62). Others do not make their position clear, merely classing andalusite and sillimanite as assimilation minerals (sic), but Tyrrell goes so far as to state that they are “never of pyrogenetic oiigin” (1934, p. 50). Because of the reliance that is placed upon accessory minerals in igneous rocks as indicators of consanguinity of magmas and of the role of assimilation and other processes in pedogenesis, it is important that the status of each mineral should be thoroughly understood. In most classifications of accessory minerals andalusite and sillimanite are either classed as “contamination accessories” (Wells, 1931) or grouped with minerals that are commonly due to contamination (Wright, 1932), and Wright regards them as “of little value for correlation purposes”. Chatterjee, however, was able to use andalusite as an indicator, on the one hand, of relationship between the Falmouth and Bodmin Moor granites, both of these containing a purple variety in fair amount, and, on the other, of the distinction of these granites from those of Dartmoor and St. Austell, in which andalusite is colourless and rare. The rare, sporadically developed andalusite in the Dartmoor granite is considered by Brammall and Harwood (1923) to be a contamination mineral, but Teall suggested (1887) that the andalusite in the Cheesewring granite is probably an “original constituent” (i.e. not mechanically incorporated with the granite, as strew from xenoliths or wall rocks), and the relative abundance and uniformity of distribution of andalusite in the normal type of the Bodmin Moor granite, as exhibited at the Cheesewring (see Ghosh, 1927), lend support to this suggestion.


2020 ◽  
Vol 7 (3) ◽  
pp. 1-13
Author(s):  
Florent Jodry ◽  
Marion Delloul ◽  
Christophe Croutsch ◽  
Philippe Duringer ◽  
Gilles Fronteau

A preventive archaeological excavation carried out in 2012 at Dambach-la-Ville (Bas-Rhin, France) uncovered a large Middle Neolithic settlement (Upper Rhine West Bischheim group) dating from the second half of the 5th millennium BCE. The site comprised a very large assemblage of well-dated macrolithic tools (more than 600). Grinding stones, including about roughouts, make up the bulk of the assemblage. Morphological analyses indicate that certain types of use-wear are linked directly to specific types of rock. The variety of rock types is unusual for this period. In fact, contrary to other assemblages from the same period mainly made up of Lower Triassic sandstone (Vosges sandstone; 43%), the tools fashioned on this settlement are mostly made from sedimentary rocks of the Permian and Lower Triassic (possible sources at 15 km), and more rarely from plutonic and metamorphic rocks (possible sources between 5 and 15 km). The use of rough textured rocks such as arkosic sandstone or microconglomerate largely dominating the assemblage. This one also includes a large group of hammerstones from different rock types (sedimentary, plutonic, volcanic and metamorphic). More than half are silicified micritic limestones, a rock that is extremely rare and can be unambiguously traced to a single outcrop about 15 kilometres from the site. This systematic interdisciplinary study of the tools and their petrography offers the opportunity to explore questions regarding provenance and procurement networks in Alsace around 4150 BCE.


Author(s):  
Mochamad Nursiyam Barkah ◽  
Fauziyah Hani ◽  
Bombom Rachmat Suganda ◽  
Munib Ikhwatun Iman ◽  
Cecep Yandri Sunarie ◽  
...  

Muarabungo Groundwater Basin,is locateed in Jambi and West Sumatra Province. Based on the four rainfall stations in Muaratebo, Dusun Rantau Pandan, Sungai Bengkal and Komplek Pengairan PU Station recorded in 2008 to 2011, the precipitation (ppt) in study area is 1799.09 mm/year. Value of evapotranspiration (Evpt) in the study area is equal to 1261.26 mm / year (70.1%). Groundwater Basin of Muarabungo has an infiltration debit of 2,516,791,750 m3 / year and run-off debit (Ro) of 798 042 638 m3 / year. Rock composer in the Muarabungo Groundwater Basin are dominated by Alluvium Deposition, Quaternary rocks, and also the surrounding areas are composed by igneous and metamorphic rocks. Aquifer with a good productvity can be found on Alluvium and sedimentary rocks such as tuff sandy, whereas region without exploitable groundwater are composed by igneous rocks and metamorphic rocks. Based on groundwater quality, Groundwater Basin is divided into 13 facies, namely Ca; Cl, ​​Mg; Cl, ​​Na + K, Cl, Ca; HCO3, Mg; HCO3, Na + K; HCO3, Ca; No. dominant type, Mg; Nodominan type, Na + K; No. dominant type, No. dominant type; Cl, ​​No. dominant type; HCO3, Nodominan type; SO4, and No. dominant type; No. dominant type. The result of water balance measurement in research area is used to show the areas for crisis and secure area. The water balance calculation and determining recharge and discharge areas are needed for developing conservation strategy.


Sign in / Sign up

Export Citation Format

Share Document