scholarly journals On the Effect of Soft Molecularly Imprinted Nanoparticles Receptors Combined to Nanoplasmonic Probes for Biomedical Applications

2021 ◽  
Vol 9 ◽  
Author(s):  
Nunzio Cennamo ◽  
Alessandra Maria Bossi ◽  
Francesco Arcadio ◽  
Devid Maniglio ◽  
Luigi Zeni
Keyword(s):  
Single Molecule ◽  
Limit Of Detection ◽  
Superior Performance ◽  
Slab Waveguide ◽  
Plasmonic Sensor ◽  
Detection Range ◽  
Molecularly Imprinted ◽  
Longitudinal Orientation ◽  
Molecularly Imprinted Nanoparticles ◽  
Optical Nanostructures

Soft, deformable, molecularly imprinted nanoparticles (nanoMIPs) were combined to nano-plasmonic sensor chips realized on poly (methyl methacrylate) (PMMA) substrates to develop highly sensitive bio/chemical sensors. NanoMIPs (dmean < 50 nm), which are tailor-made nanoreceptors prepared by a template assisted synthesis, were made selective to bind Bovine Serum Albumin (BSA), and were herein used to functionalize gold optical nanostructures placed on a PMMA substrate, this latter acting as a slab waveguide. We compared nanoMIP-functionalized non-optimized gold nanogratings based on periodic nano-stripes to optimized nanogratings with a deposited ultra-thin MIP layer (<100 nm). The sensors performances were tested by the detection of BSA using the same setup, in which both chips were considered as slab waveguides, with the periodic nano-stripes allocated in a longitudinal orientation with respect to the direction of the input light. Result demonstrated the nanoMIP-non optimized nanogratings showed superior performance with respect to the ultra-thin MIP-optimized nanogratings. The peculiar deformable character of the nano-MIPs enabled to significantly enhance the limit of detection (LOD) of the plasmonic bio/sensor, allowing the detection of the low femtomolar concentration of analyte (LOD ∼ 3 fM), thus outpassing of four orders of magnitude the sensitivies achieved so far on optimized nano-patterned plasmonic platforms functionalized with ultra-thin MIP layers. Thus, deformable nanoMIPs onto non-optimized plasmonic probes permit to attain ultralow detections, down to the quasi-single molecule. As a general consideration, the combination of more plasmonic transducers to different kinds of MIP receptors is discussed as a mean to attain the detection range for the selected application field.

scholarly journals Competitive pseudo-ELISA based on molecularly imprinted nanoparticles for microcystin-LR detection in water

2019 ◽  
Vol 91 (10) ◽  
pp. 1593-1604
Author(s):  
Yadiris Garcia ◽  
Francesco Canfarotta ◽  
Katarzyna Smolinska-Kempisty ◽  
Sergey A. Piletsky ◽  
Eduardo Pereira
Keyword(s):  
Water Samples ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Cross Reactivity ◽  
Molecularly Imprinted ◽  
The Public ◽  
Analytical Recovery ◽  
Cost Effective Alternative ◽  
Molecularly Imprinted Nanoparticles ◽  
The Stability

Abstract Microcystins (MCs) are dangerous cyanotoxins for the public health, and microcystin-LR (MC-LR) is one of most toxic, dangerous, and frequently found in water bodies. Typically, the detection of MCs is carried out by means of competitive ELISAs which, however, need special precautions for handling and storage, due to the stability of the antibodies used in this test. Molecularly imprinted nanoparticles (nanoMIPs) represents more robust and cost-effective alternative to antibodies. In this work, we developed a competitive pseudo-ELISA based on nanoMIPs (which are used in place of natural antibodies), for the detection of microcystin-LR (MC-LR). This pseudo-ELISA showed a linear response towards MC-LR, showing high affinity and low cross-reactivity against another analogue toxin (microcystin-YR). The analytical recovery of MC-LR in the analysis of water samples by the proposed pseudo-ELISA was 96 %–130 % and the limit of detection was 2.64 × 10−4 nM. The obtained results suggest that this competitive pseudo-ELISA could have high potential in the detection of toxins, due to its rapid, sensitive and accurate detection of toxin in water samples.

scholarly journals 4-Mercaptopyridine Modified Fiber Optic Plasmonic Sensor for Sub-nM Mercury (II) Detection

2021 ◽  
Author(s):  
Yifan Duan ◽  
Yang Zhang ◽  
Fang Wang ◽  
Yuting Sun ◽  
Ming Chen ◽  
...  
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Tap Water ◽  
Point Of Care ◽  
Mercury Ion ◽  
Sensor Surface ◽  
Plasmonic Sensor ◽  
External Temperature ◽  
Detection Range

AbstractIn this paper, we propose and demonstrate a high-performance mercury ion sensor with sub-nM detection limit, high selectivity, and strong practicability based on the small molecule of the 4-mercaptopyridine (4-MPY) modified tilted fiber Bragg grating surface plasmon resonance (TFBG-SPR) sensing platform. The TFBG-SPR sensor has a rich mode field distribution and a narrow bandwidth, which can detect the microscopic physical and chemical reactions on the sensor surface with high sensitivity without being disturbed by the external temperature. For the environmental compatibility and highly efficient capture of the toxic mercury ion, 4-MPY is modified on the sensor surface forming a stable (4-MPY)-Hg-(4-MPY) structure due to the specific combination between the nitrogen of the pyridine moiety and the Hg2+ via multidentate N-bonding. Moreover, gold nanoparticles (AuNPs) are connected to the sensor surface through the (4-MPY)-Hg-(4-MPY) structure, which could play an important role for signal amplification. Under the optimized conditions, the limit of detection of the sensor for mercury ions detection in the solution is as low as 1.643×10−10 M (0.1643nM), and the detection range is 1×10−9 M − 1×10−5 M. At the same time, the mercury ion spiked detection with tap water shows that the sensor has the good selectivity and reliability in actual water samples. We develop a valuable sensing technology for on-time environmental Hg2+ detection and in-vivo point of care testing in clinic applications.

Liquid Chromatography Analysis of Clozapine in Rat Brain Tissue, Using its Molecularly Imprinted Polymer after Administration of Toxic Dose of Drug and Lipid Emulsion Therapy

2019 ◽  
Vol 15 (3) ◽  
pp. 251-257
Author(s):  
Bahareh Sadat Yousefsani ◽  
Seyed Ahmad Mohajeri ◽  
Mohammad Moshiri ◽  
Hossein Hosseinzadeh
Keyword(s):  
Rat Brain ◽  
Brain Tissue ◽  
Molecularly Imprinted Polymer ◽  
Lipid Emulsion ◽  
Limit Of Detection ◽  
Imprinted Polymer ◽  
Toxic Dose ◽  
Molecularly Imprinted ◽  
The Brain ◽  
Rat Brain Tissue

Background:Molecularly imprinted polymers (MIPs) are synthetic polymers that have a selective site for a given analyte, or a group of structurally related compounds, that make them ideal polymers to be used in separation processes.Objective:An optimized molecularly imprinted polymer was selected and applied for selective extraction and analysis of clozapine in rat brain tissue.Methods:A molecularly imprinted solid-phase extraction (MISPE) method was developed for preconcentration and cleanup of clozapine in rat brain samples before HPLC-UV analysis. The extraction and analytical process was calibrated in the range of 0.025-100 ppm. Clozapine recovery in this MISPE process was calculated between 99.40 and 102.96%. The limit of detection (LOD) and the limit of quantification (LOQ) of the assay were 0.003 and 0.025 ppm, respectively. Intra-day precision values for clozapine concentrations of 0.125 and 0.025 ppm were 5.30 and 3.55%, whereas inter-day precision values of these concentrations were 9.23 and 6.15%, respectively. In this study, the effect of lipid emulsion infusion in reducing the brain concentration of drug was also evaluated.Results:The data indicated that calibrated method was successfully applied for the analysis of clozapine in the real rat brain samples after administration of a toxic dose to animal. Finally, the efficacy of lipid emulsion therapy in reducing the brain tissue concentration of clozapine after toxic administration of drug was determined.Conclusion:The proposed MISPE method could be applied in the extraction and preconcentration before HPLC-UV analysis of clozapine in rat brain tissue.

scholarly journals A simple approach to prepare fluorescent molecularly imprinted nanoparticles

RSC Advances ◽  
2021 ◽  
Vol 11 (13) ◽  
pp. 7732-7737
Author(s):  
Fenying Wang ◽  
Dan Wang ◽  
Tingting Wang ◽  
Yu Jin ◽  
Baoping Ling ◽  
...  
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Sol Gel ◽  
Silica Sol ◽  
Simple Approach ◽  
Imprinted Polymer ◽  
Molecularly Imprinted ◽  
Low Toxicity ◽  
Good Biocompatibility ◽  
Molecularly Imprinted Nanoparticles

Fluorescent molecularly imprinted polymer (FMIP) gains great attention in many fields due to their low cost, good biocompatibility and low toxicity. Here, a high-performance FMIP was prepared based on the autocatalytic silica sol–gel reaction.

scholarly journals A Compact Detection Platform Based on Gradient Guided-Mode Resonance for Colorimetric and Fluorescence Liquid Assay Detection

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2797
Author(s):  
Jing-Jhong Gao ◽  
Ching-Wei Chiu ◽  
Kuo-Hsing Wen ◽  
Cheng-Sheng Huang
Keyword(s):  
Limit Of Detection ◽  
Detection System ◽  
Fluorescence Emission ◽  
Assay Sensitivity ◽  
Detection Range ◽  
Current Form ◽  
Guided Mode ◽  
Spectral Detection ◽  
Guided Mode Resonance ◽  
Colorimetric Assays

This paper presents a compact spectral detection system for common fluorescent and colorimetric assays. This system includes a gradient grating period guided-mode resonance (GGP-GMR) filter and charge-coupled device. In its current form, the GGP-GMR filter, which has a size of less than 2.5 mm, can achieve a spectral detection range of 500–700 nm. Through the direct measurement of the fluorescence emission, the proposed system was demonstrated to detect both the peak wavelength and its corresponding intensity. One fluorescent assay (albumin) and two colorimetric assays (albumin and creatinine) were performed to demonstrate the practical application of the proposed system for quantifying common liquid assays. The results of our system exhibited suitable agreement with those of a commercial spectrometer in terms of the assay sensitivity and limit of detection (LOD). With the proposed system, the fluorescent albumin, colorimetric albumin, and colorimetric creatinine assays achieved LODs of 40.99 and 398 and 25.49 mg/L, respectively. For a wide selection of biomolecules in point-of-care applications, the spectral detection range achieved by the GGP-GMR filter can be further extended and the simple and compact optical path configuration can be integrated with a lab-on-a-chip system.

scholarly journals A Molecularly Imprinted Polymer for Selective Extraction of Phenolic Acids from Human Urine

2021 ◽  
Vol 11 (4) ◽  
pp. 1577
Author(s):  
Marco Mora-Granados ◽  
David González-Gómez ◽  
Jin Su Jeong ◽  
Alejandrina Gallego-Picó
Keyword(s):  
Phenolic Acids ◽  
Molecularly Imprinted Polymer ◽  
Human Urine ◽  
Limit Of Detection ◽  
Ph Dependence ◽  
Selective Extraction ◽  
Screening Methods ◽  
Specific Method ◽  
Imprinted Polymer ◽  
Molecularly Imprinted

Studies for monitoring the bioavailability of dietary flavonoid compounds generate great interest. Among them, low-molecular-weight phenolic acids, secondary metabolites present in colonic catabolism and urinary excretion, have been proposed as biomarkers of polyphenol intake. Using 4-hydroxyphenylacetic acid as a template, a molecularly imprinted polymer (MIP) was synthesized for selective extraction of these hydroxylated metabolites from human urine samples and posterior analysis in an HPLC-DAD-MS system. Polymers were characterized by Scanning electron microscopy (SEM), Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), Brunauer-Emmett-Teller (BET) method, and binding experiments. MIP presents specific recognition ability for template and analogues molecules. This capacity of recognition and the pH dependence of the binding strength was also studied. The method was validated over a concentration range of 0.25–40 mg/L, r2 > 0.995. In the optimized conditions, the recovery value was 94% with RSD 1.2%. The Limit of Detection (LOD) and Limit of Quantification (LOQ) were 1.22 and 3.69 mg/L, respectively. In our knowledge, it is the first time that this methodology is applied to analyze urinary catabolites of the polyphenol compound and to provide a specific method and simple analysis alternative. The selective extraction of these metabolites improves the application and results obtained by other less sensitive analysis methods than the validation method. It also facilitates the development of new screening methods.

scholarly journals Ratiometric Fluorescent Biosensors for Glucose and Lactate Using an Oxygen-Sensing Membrane

Biosensors ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 208
Author(s):  
Hong Dinh Duong ◽  
Jong Il Rhee
Keyword(s):  
Limit Of Detection ◽  
Oxygen Sensing ◽  
High Sensitivity ◽  
Glucose Sensing ◽  
Oxidation Reactions ◽  
Lactate Oxidase ◽  
Lactate Oxidation ◽  
Detection Range ◽  
Quenching Effect ◽  
Sensing Membrane

In this study, ratiometric fluorescent glucose and lactate biosensors were developed using a ratiometric fluorescent oxygen-sensing membrane immobilized with glucose oxidase (GOD) or lactate oxidase (LOX). Herein, the ratiometric fluorescent oxygen-sensing membrane was fabricated with the ratio of two emission wavelengths of platinum meso-tetra (pentafluorophenyl) porphyrin (PtP) doped in polystyrene particles and coumarin 6 (C6) captured into silica particles. The operation mechanism of the sensing membranes was based on (i) the fluorescence quenching effect of the PtP dye by oxygen molecules, and (ii) the consumption of oxygen levels in the glucose or lactate oxidation reactions under the catalysis of GOD or LOX. The ratiometric fluorescent glucose-sensing membrane showed high sensitivity to glucose in the range of 0.1–2 mM, with a limit of detection (LOD) of 0.031 mM, whereas the ratiometric fluorescent lactate-sensing membrane showed the linear detection range of 0.1–0.8 mM, with an LOD of 0.06 mM. These sensing membranes also showed good selectivity, fast reversibility, and stability over long-term use. They were applied to detect glucose and lactate in artificial human serum, and they provided reliable measurement results.

scholarly journals A Nanoplasmonic-Based Biosensing Approach for Wide-Range and Highly Sensitive Detection of Chemicals

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1961
Author(s):  
Francesco Arcadio ◽  
Luigi Zeni ◽  
Aldo Minardo ◽  
Caterina Eramo ◽  
Stefania Di Di Ronza ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Limit Of Detection ◽  
Slab Waveguide ◽  
Grating Pattern ◽  
Transparent Substrate ◽  
Synthetic Receptor ◽  
Sensing Applications ◽  
Wide Range ◽  
Plastic Optical Fibers ◽  
Highly Sensitive Detection

In a specific biosensing application, a nanoplasmonic sensor chip has been tested by an experimental setup based on an aluminum holder and two plastic optical fibers used to illuminate and collect the transmitted light. The studied plasmonic probe is based on gold nanograting, realized on the top of a Poly(methyl methacrylate) (PMMA) chip. The PMMA substrate could be considered as a transparent substrate and, in such a way, it has been already used in previous work. Alternatively, here it is regarded as a slab waveguide. In particular, we have deposited upon the slab surface, covered with a nanograting, a synthetic receptor specific for bovine serum albumin (BSA), to test the proposed biosensing approach. Exploiting this different experimental configuration, we have determined how the orientation of the nanostripes forming the grating pattern, with respect to the direction of the input light (longitudinal or orthogonal), influences the biosensing performances. For example, the best limit of detection (LOD) in the BSA detection that has been obtained is equal to 23 pM. Specifically, the longitudinal configuration is characterized by two observable plasmonic phenomena, each sensitive to a different BSA concentration range, ranging from pM to µM. This aspect plays a key role in several biochemical sensing applications, where a wide working range is required.

scholarly journals Label-Free Electrochemical Biosensor Based on Au@MoS₂–PANI for Escherichia coli Detection

Chemosensors ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 49
Author(s):  
Pushap Raj ◽  
Man Hwan Oh ◽  
Kyudong Han ◽  
Tae Yoon Lee
Keyword(s):  
Escherichia Coli ◽  
Bacterial Infections ◽  
Limit Of Detection ◽  
Bacterial Pathogens ◽  
Cost Effective ◽  
Covalent Immobilization ◽  
Label Free ◽  
Self Assembled Monolayer ◽  
Detection Range ◽  
Linear Detection

Bacterial infections have become a significant challenge in terms of public health, the food industry, and the environment. Therefore, it is necessary to address these challenges by developing a rapid, cost-effective, and easy-to-use biosensor for early diagnosis of bacterial pathogens. Herein, we developed a simple, label-free, and highly sensitive immunosensor based on electrochemical detection using the Au@MoS₂–PANI nanocomposite. The conductivity of the glassy carbon electrode is greatly enhanced using the Au@MoS₂–PANI nanocomposite and a self-assembled monolayer of mercaptopropionic acid on the gold nanoparticle surface was employed for the covalent immobilization of antibodies to minimize the nonspecific adsorption of bacterial pathogens on the electrode surface. The biosensor established a high selectivity and sensitivity with a low limit of detection of 10 CFU/mL, and detected Escherichia coli within 30 min. Moreover, the developed biosensor demonstrated a good linear detection range, practical utility in urine samples, and electrode regenerative studies.

scholarly journals Gold-nanourchin complexed silicon dioxide-probe on gap-fingered interdigitated electrode surface for Parkinson’s Disease determination by current–volt measurement

2021 ◽  
Vol 11 ◽  
pp. 184798042098735
Author(s):  
Xiaohong Li ◽  
Wei Shi ◽  
Wenyan Zhang ◽  
Weiyao Chen ◽  
Dan Cao ◽  
...  
Keyword(s):  
Parkinson’S Disease ◽  
Parkinson's Disease ◽  
Silicon Dioxide ◽  
Limit Of Detection ◽  
Detection System ◽  
Interdigitated Electrode ◽  
Limit Of Quantification ◽  
Neurofilament Light Chain ◽  
Neurofilament Light ◽  
Detection Range

Parkinson’s disease (PD) is a nervous disorder, affects physical movement, and leads to difficulty in balancing, walking, and coordination. A novel sensor is mandatory to determine PD and monitor the progress of the treatment. Neurofilament light chain (NfL) has been recognized as a good biomarker for PD and also helps to distinguish between PD and atypical PD syndromes. Immunosensor was generated by current–volt measurement on gap-fingered interdigitated electrode with silicon dioxide surface to determine NfL level. To enhance the detection, anti-NfL antibody was complexed with gold-nanourchin and immobilized on the sensing electrode. The current–volt response was gradually increased at the linear detection range from 100 fM to 1 nM. Limit of detection and sensitivity were 100 fM with the signal-to-noise ratio at n = 3 on a linear curve ( y = 0.081 x + 1.593; R 2 = 0.9983). Limit of quantification falls at 1 pM and high performance of the sensor was demonstrated by discriminating against other neurogenerative disease markers, in addition, it was reproducible even in serum-spiked samples. This method of detection system aids to measure the level of NfL and leads to determine the condition with PD.

Sign in / Sign up

Export Citation Format

Share Document