scholarly journals Optimal Implantation Site of Orthodontic Micro-Screws in the Mandibular Anterior Region Based on CBCT

2021 ◽  
Vol 12 ◽  
Author(s):  
Yannan Wang ◽  
Quan Shi ◽  
Feng Wang

Background: To determine the optimal implantation site of orthodontic micro-screws based on cone beam computed tomography (CBCT) analysis in the mandibular anterior tooth region, provide a theoretical basis for orthodontic implant placement and improve post-implantation stability.Methods: Forty patients who underwent CBCT scanning were selected for this study. CBCT scanning was applied to measure the interradicular distance, buccolingual dimension, labial cortical bone thickness and lingual cortical bone thickness between mandibular anterior teeth at planes 2, 4, 6, and 8 mm below the alveolar ridge crest. The data were measured and collected to obtain a comprehensive evaluation of the specific site conditions of the alveolar bone.Results: The interradicular distance, buccolingual dimension and labial cortical bone thickness between the mandibular anterior teeth were positively correlated with the distance below the alveolar ridge crest (below 8 mm). The interradicular distance, buccolingual dimension, labial cortical bone thickness, and lingual cortical bone thickness were all greater than those in other areas between the lateral incisor root and canine incisor root 4, 6, and 8 mm below the alveolar ridge crest.Conclusion: The area between the lateral incisor root and the canine incisor root in planes 4, 6, and 8 mm from the alveolar ridge crest can be used as safe sites for implantation, while 8 mm below the alveolar ridge crest can be the optimal implantation site. An optimal implantation site can be 8 mm below the alveolar ridge crest between the lateral incisor root and the canine incisor root.

2019 ◽  
Author(s):  
Yannan Wang ◽  
Shi Quan ◽  
Juan Xu ◽  
Feng Wang

Abstract Background To determine the optimal implantation site of orthodontic micro-screws based on cone beam computed tomography (CBCT) analysis in the mandibular anterior tooth region, provide a theoretical basis for orthodontic implant placement and improve post-implantation stability. Methods Forty patients who underwent CBCT scanning were selected for this study. CBCT scanning was applied to measure the interradicular distance, buccolingual dimension, labial cortical bone thickness and lingual cortical bone thickness between mandibular anterior teeth at planes 2 mm, 4 mm, 6 mm and 8 mm below the alveolar ridge crest. The data were measured and collected to obtain a comprehensive evaluation of the specific site conditions of the alveolar bone. Results The interradicular distance, buccolingual dimension and labial cortical bone thickness between the mandibular anterior teeth were positively correlated with the distance below the alveolar ridge crest (below 8 mm). The interradicular distance, buccolingual dimension, labial cortical bone thickness and lingual cortical bone thickness were all greater than those in other areas between the lateral incisor root and canine incisor root 4 mm, 6 mm, and 8 mm below the alveolar ridge crest. Conclusion The area between the lateral incisor root and the canine incisor root in planes 4 mm, 6 mm, and 8 mm from the alveolar ridge crest can be used as safe sites for implantation, while 8 mm below the alveolar ridge crest can be the optimal implantation site. An optimal implantation site can be 8 mm below the alveolar ridge crest between the lateral incisor root and the canine incisor root.


2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Marziyeh Shafizadeh ◽  
Azita Tehranchi ◽  
Saeed Reza Motamedian

Context: The labial cortical bone may influence the outcomes of several treatments including fresh socket implant placement and orthodontic treatments. A thin labial plate may contribute to increased risks of periodontal consequences during dental procedures. Acknowledgment of the average values may guide clinicians to take particular considerations in making treatment decisions. Therefore, this study aimed to systematically review the labial cortical bone thickness (LBT) in the anterior maxillary teeth. Objective: The primary purpose of this study was to review the LBT in the anterior maxillary teeth to present the range of average LBT in the global population. Evidence Acquisition: An electronic search was conducted in PubMed, Embase, ProQuest, Web of Science, and Scopus databases. English studies that measured the LBT in the maxillary anterior teeth using CT or CBCT scans were deemed relevant. Only studies performed on adult patients with a lack of periodontal disease were included. Results: A total of 49 studies were included. Mean LBT ranged 0.13 - 3.08, 0.29 - 4.2, and 0.36 - 4.5 mm in maxillary central incisor, lateral incisor, and canine, respectively. Expectedly, LBT was affected by the vertical level of the measurement point and increased toward the apex. In total, the LBT in the anterior maxilla ranged from 0.13 to 4.5 mm. In comparison with other populations, a relatively thin labial plate was evidenced in the Iranian populations. Conclusions: This study showed a wide range of LBT in the esthetic zone. A thin plate in the esthetic area necessitates caution in orthodontic treatments, particularly when tooth expansion or proclination is required. Additionally, wide ranges of reported values which are mostly under 2 mm, highlight the importance of CBCT acquisition before any fresh socket implant placement.


2014 ◽  
Vol 85 (5) ◽  
pp. 799-805 ◽  
Author(s):  
Mehmet Akin ◽  
Zeliha Muge Baka ◽  
Zehra Ileri ◽  
Faruk Ayhan Basciftci

ABSTRACT Objective:  To quantitatively evaluate the effects of asymmetric rapid maxillary expansion (ARME) on cortical bone thickness and buccal alveolar bone height (BABH), and to determine the formation of dehiscence and fenestration in the alveolar bone surrounding the posterior teeth, using cone-beam computed tomography (CBCT). Materials and Methods:  The CBCT records of 23 patients with true unilateral posterior skeletal crossbite (10 boys, 14.06 ± 1.08 years old, and 13 girls, 13.64 ± 1.32 years old) who had undergone ARME were selected from our clinic archives. The bonded acrylic ARME appliance, including an occlusal stopper, was used on all patients. CBCT records had been taken before ARME (T1) and after the 3-month retention period (T2). Axial slices of the CBCT images at 3 vertical levels were used to evaluate the buccal and palatal aspects of the canines, first and second premolars, and first molars. Paired samples and independent sample t-tests were used for statistical comparison. Results:  The results suggest that buccal cortical bone thickness of the affected side was significantly more affected by the expansion than was the unaffected side (P < .05). ARME significantly reduced the BABH of the canines (P < .01) and the first and second premolars (P < .05) on the affected side. ARME also increased the incidence of dehiscence and fenestration on the affected side. Conclusions:  ARME may quantitatively decrease buccal cortical bone thickness and height on the affected side.


2019 ◽  
Author(s):  
Reza Derafshi ◽  
Janan Ghapanchi ◽  
Mitra Farzin ◽  
Abdolaziz Haghnegahdar ◽  
Maryam Zahed ◽  
...  

Abstract Background: Osteoporosis is a disease of the bone structure which has many outcomes for the patient. Tooth loss and failure of implant placement can be related to this disorder in the jaw bones which is shown by the reduction of mandibular inferior cortical thickness. The aim of this study is to find a relationship between mandibular inferior cortical thickness using panoramic radiographs and tooth existence. Methods: A total of 57 panoramic views of complete edentulous patients and 164 partial edentulous cases were evaluated and compared to 117 dentate age and sex matched subjects. Mandibular cortical thickness was measured on 3 reference points (below the mental foramen (S1), estimated position of the first molar (S2) estimated position of the third molar (S3)) on both left and right sides using marking gauge in Agfa program. Results: Data revealed that cortical bone thickness was significantly reduced in older patients (P=0.031). The final value of the three measurements of the mandibular border thickness was 2.3128mm ± 0.74840 in the right side (RS) and 2.407±0.802 mm in the left side (LS) for the complete edentulous group, 2.9026± 0.7513 mm in RS and 2.9976 ±1.06769 in LS for partial edentulous group and 2.8709± 0.6263 in RS and 2.9812 ±0.83081 in LS for the dentate cases. Complete edentulous cases and partial edentulous cases that had lost posterior teeth had no significant difference in cortical thickness, but both groups had a significant thinner cortical width compared to dentate subjects (P= 0.001 and P=0.002). But lack of anterior teeth did not have the same effect compared to dentate individuals (P=0.929). Conclusions: The present study demonstrates a significant relationship between tooth loss in the posterior region and reduction of inferior mandibular border which is a value of osteoporosis. Anterior tooth loss however does not have the same effect. Dentist and physicians should be in close contact in such patients to avoid further tooth loss and also diagnose this chronic disease in earlier stages.


2020 ◽  
Vol 25 (6) ◽  
pp. 33-42
Author(s):  
Carolina Carmo de Menezes ◽  
Sérgio Estelita Barros ◽  
Diego Luiz Tonello ◽  
Aron Aliaga-Del Castillo ◽  
Daniela Garib ◽  
...  

ABSTRACT Introduction: Controversial reports suggest a relationship between growth pattern and cortical alveolar bone thickness, and its effect in the use of mini-implants. Objective: The main purpose of this study was to assess the influence of the growth pattern on the cortical alveolar bone thickness and on the stability and success rate of mini-implants. Methods: Fifty-six mini-implants were inserted in the buccal region of the maxilla of 30 patients. These patients were allocated into two groups, based on their growth pattern (horizontal group [HG] and vertical group [VG]). Cortical thickness was measured using Cone Beam Computed Tomography. Stability of mini-implants, soft tissue in the insertion site, sensitivity during loading and plaque around the mini-implants were evaluated once a month. Intergroup comparisons were performed using t tests, Mann-Whitney tests, and Fisher exact tests. Correlations were evaluated with Pearson’s correlation coefficient. Results: The cortical bone thickness was significantly greater in the HG at the maxillary labial anterior region and at the mandibular buccal posterior and labial anterior regions. There was a significant negative correlation between Frankfort-mandibular plane angle (FMA) and the labial cortical thickness of the maxilla, and with the labial and lingual cortical bone thicknesses of the mandible. No significant intergroup difference was found for mini-implant mobility and success rate. No associated factor influenced stability of the mini-implants. Conclusions: Growth pattern affects the alveolar bone cortical thickness in specific areas of the maxilla and mandible, with horizontal patients presenting greater cortical bone thickness. However, this fact may have no influence on the stability and success rate of mini-implants in the maxillary buccal posterior region.


2021 ◽  
Vol 80 (Suppl 1) ◽  
pp. 825.2-826
Author(s):  
M. Jansen ◽  
A. Ooms ◽  
T. D. Turmezei ◽  
J. W. Mackay ◽  
S. Mastbergen ◽  
...  

Background:In addition to cartilage degeneration, knee osteoarthritis (OA) causes bone changes, including cortical bone thickening, subchondral bone density decrease, and bone shape changes as a result of widening and flattening condyles and osteophyte formation. Knee joint distraction (KJD) is a joint-preserving treatment for younger (<65 years) knee OA patients that has been shown to reverse OA cartilage degradation. On radiographs, KJD showed a decrease in subchondral bone density and an increase in osteophyte formation. However, these bone changes have never been evaluated with a 3D imaging technique.Objectives:To evaluate cortical bone thickness, subchondral trabecular bone density, and bone shape on CT scans before and one year after KJD treatment.Methods:19 KJD patients were included in an extended imaging protocol, undergoing a CT scan before and one year after treatment. Stradview v6.0 was used for semi-automatic tibia and femur segmentation from axial thin-slice (0.45mm) CT scans. Cortical bone thickness (mm) and trabecular bone density (Hounsfield units, HU) were measured with an automated algorithm. Osteophytes were excluded. Afterwards, wxRegSurf v18 was used for surface registration. Registration data was used for bone shape measurements. MATLAB R2020a and the SurfStat MATLAB package were used for data analysis and visualization. Two-tailed F-tests were used to calculate changes over time. Two separate linear regression models were used to show the influence of baseline Kellgren-Lawrence grade and sex on the changes over time. Statistical significance was calculated with statistical parametric mapping; a p-value <0.05 was considered statistically significant. Bone shape changes were explored visually using vertex by vertex displacements between baseline and follow-up. Patients were separated into two groups based on whether their most affected compartment (MAC) was medial or lateral. Only patients with axial CT scans at both time points available for analysis were included for evaluation.Results:3 Patients did not have complete CTs and in 1 patient the imaged femur was too short, leaving 16 patients for tibial analyses and 15 patients for femoral analyses. The MAC was predominantly the medial side (medial MAC n=14; lateral n=2). Before treatment, the MAC cortical bone was compared to the rest of the joint (Figure 1). One year after treatment, MAC cortical thickness decreased, although this decrease of up to approximately 0.25 mm was not statistically significant. The trabecular bone density was also higher before treatment in the MAC, and a decrease was seen throughout the entire joint, although statistically significant only for small areas on mostly the MAC where this decrease was up to approximately 80 HU (Figure 1). Female patients and patients with a higher Kellgren-Lawrence grade showed a somewhat larger decrease in cortical bone thickness. Trabecular density decreased less for patients with a higher Kellgren-Lawrence grade, and female patients showed a higher density decrease interiorly while male patients showed a higher decrease exteriorly. None of this was statistically significant. The central areas of both compartments showed an outward shape change, while the outer ring showed inward changes.Conclusion:MAC cortical bone thickness shows a partial decrease after KJD. Trabecular bone density decreased on both sides of the joint, likely as a direct result of the bicompartmental unloading. For both subchondral bone parameters, MAC values became more similar to the LAC, indicating (partial) subchondral bone normalization in the most affected parts of the joint. The bone shape changes may indicate a reversal of typical OA changes, although the inward difference that was seen on the outer edges may be a result of osteophyte-related changes that might have affected the bone segmentation. In conclusion, KJD treatment shows subchondral bone normalization in the first year after treatment, and longer follow-up might show whether these changes are a temporary result of joint unloading or indicate more prolonged bone changes.Disclosure of Interests:None declared.


2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Sadaf Adibi ◽  
Alireza Shakibafard ◽  
Zohreh Karimi Sarvestani ◽  
Najmeh Saadat ◽  
Leila Khojastepour

Background. Usefulness of ultrasound (US) in detection of intrabony lesions has been showed. A cortical bone perforation or a very thin and intact cortical bone is prerequisite for this purpose.Objective. The current in vitro study was aimed at measuring the cut-off thickness of the overlying cortical bone which allows ultrasonic assessment of bony defects.Materials and Methods. 20 bovine scapula blocks were obtained. Samples were numbered from 1 to 20. In each sample, 5 artificial lesions were made. The lesions were made in order to increase the overlying bone thickness, from 0.1 mm in the first sample to 2 mm in the last one (with 0.1 mm interval). After that, the samples underwent ultrasound examinations by two practicing radiologists.Results. All five lesions in samples numbered 1 to 11 were detected as hypoechoic area. Cortical bone thickness more than 1.1 mm resulted in a failure in the detection of central lesions.Conclusion. We can conclude that neither bony perforation nor very thin cortical bones are needed to consider US to be an effective imaging technique in the evaluation of bony lesion.


Sign in / Sign up

Export Citation Format

Share Document