scholarly journals Influence of Fly Ash and Polyacrylamide Mixtures on Growth Properties of Artemisia ordosica in the Desert Region of North China

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 590
Author(s):  
Jiping Niu ◽  
Xiaoling Su ◽  
Zejun Tang
Keyword(s):  
Fly Ash ◽  
North China ◽  
Soil Layer ◽  
Principal Component ◽  
Good Growth ◽  
Fresh Weight ◽  
Artemisia Ordosica ◽  
Basal Diameter ◽  
Growth Properties ◽  
Total Fresh Weight

This study investigated the effects of consolidated soil layer (CSL) composed of fly ash (FA) and polyacrylamide (PAM) on the growth of Artemisia ordosica through plot experiments in Inner Mongolia, North China. It could provide a feasibility reference for ecological restoration and combating desertification in the desert areas. The germination and growth characteristics of Artemisia ordosica were studied in the control soil and 6 kinds of CSL, which were formed with 3 addition rates of FA (5%, 10%, and 15% (w/w) soil) and 2 addition rates of PAM (0.006% and 0.012% (w/w) soil). The results showed that CSL could provide good growth conditions for Artemisia ordosica in arid regions, especially for plant height, basal diameter, total fresh weight, and total dry weight in F5P1 as seen in 2017 and 2018. The FA, the PAM, and the interaction of FA and PAM all had significant impacts on the percentage of seedling emergence and total fresh weight (p < 0.05). The effects of CSL on the emergence and growth properties of Artemisia ordosica were evaluated by principal component analysis, and the CSL consisting of 5% FA and 0.006% PAM was recommended for plant growth.

scholarly journals Coal Fly Ash and Polyacrylamide Influence Transport and Redistribution of Soil Nitrogen in a Sandy Sloping Land

Agriculture ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 47
Author(s):  
Kai Yang ◽  
Zejun Tang ◽  
Jianzhang Feng
Keyword(s):  
Fly Ash ◽  
Sandy Soil ◽  
Coal Fly Ash ◽  
Soil Layer ◽  
Nutrient Retention ◽  
Soil Surface ◽  
Rainfall Event ◽  
N Losses ◽  
N Concentration ◽  
Application Rates

Sandy soils are prone to nutrient losses, and consequently do not have as much as agricultural productivity as other soils. In this study, coal fly ash (CFA) and anionic polyacrylamide (PAM) granules were used as a sandy soil amendment. The two additives were incorporated to the sandy soil layer (depth of 0.2 m, slope gradient of 10°) at three CFA dosages and two PAM dosages. Urea was applied uniformly onto the low-nitrogen (N) soil surface prior to the simulated rainfall experiment (rainfall intensity of 1.5 mm/min). The results showed that compared with no addition of CFA and PAM, the addition of CFA and/or PAM caused some increases in the cumulative NO3−-N and NH4+-N losses with surface runoff; when the rainfall event ended, 15% CFA alone treatment and 0.01–0.02% PAM alone treatment resulted in small but significant increases in the cumulative runoff-associated NO3−-N concentration (p < 0.05), meanwhile 10% CFA + 0.01% PAM treatment and 15% CFA alone treatment resulted in nonsignificant small increases in the cumulative runoff-associated NH4+-N concentration (p > 0.05). After the rainfall event, both CFA and PAM alone treatments increased the concentrations of NO3−-N and NH4+-N retained in the sandy soil layer compared with the unamended soil. As the CFA and PAM co-application rates increased, the additive effect of CFA and PAM on improving the nutrient retention of sandy soil increased.

scholarly journals Fly Ash Modified Coalmine Solid Wastes for Stabilization of Trace Metals in Mining Damaged Land Reclamation: A Case Study in Xuzhou Coalmine Area

2018 ◽  
Vol 15 (10) ◽  
pp. 2317 ◽  
Author(s):  
Jiu Huang ◽  
Peng Wang ◽  
Chaorong Xu ◽  
Zhuangzhuang Zhu
Keyword(s):  
Fly Ash ◽  
Trace Metal ◽  
Soil Layer ◽  
Fly Ashes ◽  
Migration Ability ◽  
Metal Elements ◽  
Trace Metal Elements ◽  
Simulated Precipitation ◽  
Backfill Materials

In China, coalmine wastes, such as gangues, are used for reclamation of mining subsided land. However, as waste rocks, gangues contain several trace metal elements, which could be released under natural weathering and hydrodynamic leaching effects and then migrate into the reclamed soil layer. However, it is very difficult to find adequate other backfill materials for substitution of gangues. In this paper, we present a novel method and case study to restrict the migration ability of trace metal elements in gangues by using another kind of coalmine solid waste—fly ashes from coal combustion. In this study, fly ashes were mixed with gangues in different mass proportions 1:0.2, 1:0.4, 1:0.6 and 1:0.8 as new designed backfill materials. Due to the help of fly ash, the occurrence states of studied trace metal elements were greatly changed, and their releasing and migration ability under hydrodynamic leaching effect were also significantly restricted. In this research seven trace metal elements in gangues Cu, Zn, Pb, Cd, Cr, Mn and Ni were studied by using soil column hydrodynamical leaching method and simulated precipitation for one year. The results show that under the driving of natural precipitation trace metal elements were generally transported deep inside the reconstructed land base, i.e., far away from soil layer and most of the trace metal elements were transformed into a bonded state, or combined in inert occurrence states, especially the residual state. With this method, the migration activities of tested trace metal elements were greatly restricted and the environmental potential risk could be significantly reduced.

scholarly journals The efficacy of different seed priming agents for promoting sorghum germination under salt stress

PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0245505
Author(s):  
Xiaofei Chen ◽  
Ruidong Zhang ◽  
Yifan Xing ◽  
Bing Jiang ◽  
Bang Li ◽  
...  
Keyword(s):  
Salt Stress ◽  
Seed Germination ◽  
Germination Rate ◽  
Principal Component ◽  
Dry Weight ◽  
Seed Priming ◽  
Nacl Stress ◽  
Future Research ◽  
Fresh Weight ◽  
Positive Effects

Sorghum [Sorghum bicolor (L.) Moench] seed germination is sensitive to salinity, and seed priming is an effective method for alleviating the negative effects of salt stress on seed germination. However, few studies have compared the effects of different priming agents on sorghum germination under salt stress. In this study, we quantified the effects of priming with distilled water (HP), sodium chloride (NaCl), potassium chloride (KCl), calcium chloride (CaCl2), and polyethylene glycol (PEG) on sorghum seed germination under 150 mM NaCl stress. The germination potential, germination rate, germination index, vigor index, root length, shoot length, root fresh weight, shoot fresh weight, root dry weight, and shoot dry weight were significantly reduced by salt stress. Different priming treatments alleviated the germination inhibition caused by salt stress to varying degrees, and 50 mM CaCl2 was the most effective treatment. In addition, the mitigation effect of priming was stronger on root traits than on shoot traits. Mitigation efficacy was closely related to both the type of agent and the concentration of the solution. Principal component analysis showed that all concentrations of CaCl2 had higher scores and were clearly distinguished from other treatments based on their positive effects on all germination traits. The effects of the other agents varied with concentration. The priming treatments were divided into three categories based on their priming efficacy, and the 50, 100, and 150 mM CaCl2 treatments were placed in the first category. The 150 mM KCl, 10% PEG, HP, 150 mM NaCl, 30% PEG, and 50 mM KCl treatments were placed in the second category, and the 100 mM NaCl, 100 mM KCl, 20% PEG, and 50 mM NaCl treatments were least effective and were placed in the third category. Choosing appropriate priming agents and methods for future research and applications can ensure that crop seeds germinate healthily under saline conditions.

scholarly journals Thermal and mechanical behavior of composite mortars containing natural sorptive clays and fly ash

2019 ◽  
Vol 51 (1) ◽  
pp. 39-56 ◽  
Author(s):  
Anja Terzic ◽  
Lato Pezo ◽  
Ljiljana Milicic ◽  
Nevenka Mijatovic ◽  
Zagorka Radojevic ◽  
...  
Keyword(s):  
Fly Ash ◽  
Mechanical Behavior ◽  
Mechanical Performance ◽  
Thermal Characteristics ◽  
Principal Component ◽  
Effective Dosage ◽  
Factor Space ◽  
Ann Model ◽  
River Sand ◽  
Mineral Additives

Mineral additives are extensively applied as cement replacement materials in both construction concrete and mortar. Fly ash is one of the most commonly utilized additives which improve rheological properties, as well as thermal and mechanical behavior of mortar, and as such it has been widely investigated. This industrial byproduct comprises heavy metals in its composition; therefore further research is needed to optimize its effective dosage. Moreover, certain sorptive clays, such as natural zeolite and bentonite, can prevent migration of toxic elements from fly ash by immobilizing them in their structure. Ten experimental mortars are prepared with Portland cement, river sand and addition of fly ash, zeolite and/or bentonite in accordance with chemometric experimental design rules. The aim of the study was to investigate the effect of mineral additives on thermal and mechanical performances of mortar. Thermal characteristics were monitored via dilatometric analysis and DTA method. Principal component analysis was used on the results of physico-mechanical testing (workability, bulk density, water absorption, shrinkage, compressive and flexural strength) to enable the divisions of the observed samples into groups in the factor space. The performance of Artificial Neural Network was compared with the experimental data in order to develop rapid and accurate method for prediction of mechanical parameters of mortar. The ANN model showed high overall prediction accuracy (r2 = 0.989, during training cycle). The test results indicate that incorporation of the mineral additives gave cost effective mortars with sufficiently good properties. However, tools of analytical modeling highlighted mortar with zeolite and fly ash as the optimal composition regarding its mechanical performance.

scholarly journals Effect of Postsowing Compaction on Cold and Frost Tolerance of North China Plain Winter Wheat

2017 ◽  
Vol 2017 ◽  
pp. 1-9
Author(s):  
Caiyun Lu ◽  
Chunjiang Zhao ◽  
Xiu Wang ◽  
Zhijun Meng ◽  
Jian Song ◽  
...  
Keyword(s):  
Winter Wheat ◽  
Soil Temperature ◽  
North China Plain ◽  
North China ◽  
Growth Parameters ◽  
Soil Layer ◽  
Frost Tolerance ◽  
Cold Weather ◽  
Shoot Number ◽  
Soil Temperatures

Improper postsowing compaction negatively affects soil temperature and thereby cold and frost tolerance, particularly in extreme cold weather. In North China Plain, the temperature falls to 5 degrees below zero, even lower in winter, which is period for winter wheat growing. Thus improving temperature to promote wheat growth is important in this area. A field experiment from 2013 to 2016 was conducted to evaluate effects of postsowing compaction on soil temperature and plant population of wheat at different stages during wintering period. The effect of three postsowing compaction methods—(1) compacting wheel (CW), (2) crosskill roller (CR), and (3) V-shaped compacting roller after crosskill roller (VCRCR)—on winter soil temperatures and relation to wheat shoot growth parameters were measured. Results showed that the highest soil midwinter temperature was in the CW treatment. In the 20 cm and 40 cm soil layer, soil temperatures were ranked in the following order of CW > VCRCR > CR. Shoot numbers under CW, CR, and VCRCR treatments were statistically 12.40% and 8.18% higher under CW treatment compared to CR or VCRCR treatments at the end of wintering period. The higher soil temperature under CW treatment resulted in higher shoot number at the end of wintering period, apparently due to reduced shoot death by cold and frost damage.

Influence of Planting Date on the Growth of Johnsongrass (Sorghum halepense) from Seed

Weed Science ◽  
1979 ◽  
Vol 27 (5) ◽  
pp. 554-558 ◽  
Author(s):  
P. E. Keeley ◽  
R. J. Thullen
Keyword(s):  
Seed Production ◽  
Planting Date ◽  
Sorghum Halepense ◽  
Viable Seed ◽  
Fresh Weight ◽  
Total Fresh Weight

Seed of johnsongrass [Sorghum halepense(L.) Pers.] were planted during 1976 and 1977 at monthly intervals from March through October to study the growth and reproductive habits of this weed at Shafter, California. Plants were grown for 12 weeks and harvested at 3-week intervals. Emergence and development of plants increased with temperature. April through August plantings yielded 10-to 20-fold as much total fresh weight as March and September plantings. After planting, rhizome production normally began in 3 to 6 weeks and seed production in 6 to 9 weeks. From the April through August plantings, rhizomes accounted for averages of 13, 25, and 40% of the total fresh weight of plants 6, 9, and 12 weeks after planting, respectively. This compared, respectively, with 16, 9, and 6% for roots and 70, 66, and 54% for shoots. Seedlings emerging in March produced rhizomes in early June and viable seed in late June. Seedlings emerging as late as September produced rhizomes and some viable seed before killing frosts in November.

scholarly journals Nutrient Release Pattern and Greenhouse-Grown Swiss Chard Response to Biochar Inoculated with Vermicast

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Lord Abbey ◽  
Jinsheng Cai ◽  
Lokanadha R. Gunupuru ◽  
Mercy Ijenyo ◽  
Ebenezer O. Esan ◽  
...  
Keyword(s):  
Plant Growth ◽  
Growth Response ◽  
Leaf Surface ◽  
Nutrient Release ◽  
Principal Component ◽  
Fresh Weight ◽  
Total Leaf Area ◽  
Total Leaf ◽  
Swiss Chard ◽  
Leaf Surface Area

A study was performed to assess nutrient release from biochar inoculated with solid vermicast (SVB), vermicast tea (VTB), deionized water (DWB), uninoculated biochar (Bioc), and Promix-BX (Pro-BX). The growth response of Swiss chard (Beta vulgaris subsp. vulgaris) cv. Rhubarb chard was also assessed. Comparatively, nutrients were released slowly from treatments SVB and VTB compared to the other treatments. The rate of nutrient release determined by total dissolved solids and electric conductivity from the Pro-BX was the highest. The trend for the plant growth components, total leaf surface area and leaf fresh weight at first harvest, was Pro-BX > Bioc > DWB = SVB > VTB. The only treatment that increased total leaf area and leaf fresh weight at the second harvest by approximately 1.02- and 1.88-fold was VTB. Leaf fresh weight was significantly reduced by approximately 0.33-fold for DWB, 0.28-fold for Bioc, and 0.70-fold for Pro-BX but was not altered by SVB at the second harvest as compared to the first harvest. A 2-dimensional principal component analysis (PCA) biplot confirmed that treatment Pro-BX increased plant growth components at the first harvest only. The locations of SVB and VTB on the PCA biplot confirmed their efficacies, which led to increases in the plant growth components at the second harvest. Overall, the VTB adsorbed more nutrients onto its surface that were slowly released to enhance the Swiss chard cv. Rhubarb chard plant growth at the second harvest. Further studies should consider microbial activities.

scholarly journals Growth and Ginsenosides Content of Ginseng Sprouts According to LED-Based Light Quality Changes

Agronomy ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1979
Author(s):  
Yoon-Jeong Kim ◽  
Thi Kim Loan Nguyen ◽  
Myung-Min Oh
Keyword(s):  
Photosynthetic Rate ◽  
Dry Weight ◽  
Fresh Weight ◽  
Light Spectra ◽  
Fluorescent Lamps ◽  
Total Saponin ◽  
R Ratio ◽  
Saponin Content ◽  
One Year ◽  
Total Fresh Weight

This study investigated growth and ginsenosides content of ginseng sprouts under various light spectra. One-year-old ginseng seedlings were cultivated under various light treatments including: monochromatic (red (R), green (G), and blue (B)), various RB and RGB combinations, white (fluorescent lamps (FL) and natural white (NW)), and supplemental far red (FR). R and high R ratio increased growth characteristics of ginseng sprouts (excepted for root dry weight). The replacement of G for B in RGB group and W group did not increase the growth, and supplemental FR increased shoot and root fresh weights, total fresh weight, and leaf area. R had 1.5 times higher photosynthetic rate compared to B and G, and R8G1B1 and R9G1B0 showed the highest values in RGB group; whereas the RB, W, and FR groups did not enhance photosynthetic rate. B and high B ratio increased shoot saponin and ginsenosides, total saponin and ginsenosides contents. Total saponin content in shoot was 4.4 times higher than that in root. The supplemental FR enhanced both total saponin and ginsenosides contents. In conclusion, NW + FR showed the highest total fresh weight, saponin and ginsenosides contents among all treatments, suggesting that supplementation of FR has a positive effect on ginseng sprouts grown in plant factories.

Seedling Growth Characteristics of 24 Provenances of Larix principis-rupprechtii

2014 ◽  
Vol 1073-1076 ◽  
pp. 1099-1103
Author(s):  
Guo Jun Zhang ◽  
Cheng He Wang ◽  
Min Hua Zhao ◽  
Wan Qi Wang ◽  
Jun Ming Yang
Keyword(s):  
Seedling Growth ◽  
Root Length ◽  
Growth Traits ◽  
Comprehensive Evaluation ◽  
Correlation Coefficients ◽  
Growth Characteristics ◽  
Fresh Weight ◽  
Basal Diameter ◽  
Membership Value

Seedling growth traits of 24 provenances of Larix principis-rupprechtii were analyzed to select superior provenances. Variance and correlation on height, basal diameter, root length, root and stem fresh weight of 1-year old and 2-year old seedlings of those provenances were analyzed. Then correlation coefficients between these growth traits and membership value of height and basal diameter of 24 provenances were carried on. Results showed that variance on growth traits of 1-year old seedlings among 24 provenances were only significant for height, but for basal diameter, height, root and stem fresh weight of 2-year old seedlings. Based on correlation coefficients between growth traits, height and basal diameter were selected for comprehensive evaluation. The top 5 provenances of Larix principis-rupprechtii were Neimeng Balinzuo, Hebei Weichang 1-21, 7-46, 8-75, and Beijing, according to average of membership value of height and basal diameter.

Sign in / Sign up

Export Citation Format

Share Document