scholarly journals Introduction of a New Index of Field Operations Efficiency

2020 ◽  
Vol 10 (1) ◽  
pp. 329
Author(s):  
Kun Zhou ◽  
Dionysis Bochtis ◽  
Allan Leck Jensen ◽  
Dimitrios Kateris ◽  
Claus Grøn Sørensen
Keyword(s):  
Operations Management ◽  
Test Results ◽  
Agricultural Machinery ◽  
Machine Breakdowns ◽  
Agricultural Operations ◽  
Field Efficiency ◽  
Set Up ◽  
Machinery System ◽  
Selection Of

The evaluation and prediction of the agricultural machinery field efficiency is essential for agricultural operations management. Field efficiency is affected by unpredictable (e.g., machine breakdowns) and stochastic (e.g., yield) factors, and thus, it is generally provided by average norms. However, the average values and ranges of the field efficiency are of limited value when a decision has to be made on the selection of the appropriate machinery system for a specific operational set up. To this end, in this paper, a new index for field operability, the field traversing efficiency (FTE), a distance-based measure, is introduced and a dedicated tool for estimation of this measure is presented. In order to show the degree of the dependence of the FTE index on the operational features, a number of 864 scenarios derived from the consideration of six sample field shapes, three conventional fieldwork patterns, four driving directions, and twelve combinations of machine unit kinematics and implement width were evaluated by the developed tool. The test results showed that variation of FTE was up to 23% in the tested scenarios when using different operational setups.

Platelet Anti-Aggregating Activity and Tolerance of Clopidogrel in Atherosclerotic Patients

1996 ◽  
Vol 76 (06) ◽  
pp. 0939-0943 ◽  
Author(s):  
B Boneu ◽  
G Destelle ◽  
Keyword(s):  
Platelet Aggregation ◽  
Large Scale ◽  
Bleeding Time ◽  
Antithrombotic Activity ◽  
Ambulatory Patients ◽  
Patients At Risk ◽  
Set Up ◽  
Ischemic Events ◽  
Large Scale Clinical Trial ◽  
Selection Of

SummaryThe anti-aggregating activity of five rising doses of clopidogrel has been compared to that of ticlopidine in atherosclerotic patients. The aim of this study was to determine the dose of clopidogrel which should be tested in a large scale clinical trial of secondary prevention of ischemic events in patients suffering from vascular manifestations of atherosclerosis [CAPRIE (Clopidogrel vs Aspirin in Patients at Risk of Ischemic Events) trial]. A multicenter study involving 9 haematological laboratories and 29 clinical centers was set up. One hundred and fifty ambulatory patients were randomized into one of the seven following groups: clopidogrel at doses of 10, 25, 50,75 or 100 mg OD, ticlopidine 250 mg BID or placebo. ADP and collagen-induced platelet aggregation tests were performed before starting treatment and after 7 and 28 days. Bleeding time was performed on days 0 and 28. Patients were seen on days 0, 7 and 28 to check the clinical and biological tolerability of the treatment. Clopidogrel exerted a dose-related inhibition of ADP-induced platelet aggregation and bleeding time prolongation. In the presence of ADP (5 \lM) this inhibition ranged between 29% and 44% in comparison to pretreatment values. The bleeding times were prolonged by 1.5 to 1.7 times. These effects were non significantly different from those produced by ticlopidine. The clinical tolerability was good or fair in 97.5% of the patients. No haematological adverse events were recorded. These results allowed the selection of 75 mg once a day to evaluate and compare the antithrombotic activity of clopidogrel to that of aspirin in the CAPRIE trial.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

PENGEMBANGAN BAHAN AJAR IPA SMP PADA TEMA ENERGI DALAM TUBUH MENGGUNAKAN METODE 4STMD

EDUSAINS ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 166-175
Author(s):  
Gia Juniar Nur Wahidah ◽  
Sjaeful Anwar
Keyword(s):  
Concept Maps ◽  
The Body ◽  
Instructional Materials ◽  
Teaching Material ◽  
Test Results ◽  
Teaching Materials ◽  
Eligibility Criteria ◽  
Material Development ◽  
Selection Step ◽  
Selection Of

Abstract This research aims to produce science teaching materials in junior level with Energy in The Body as the theme using Four Steps Teaching Material Development  (4STMD). The material is presented in an integrated way so that students can  think holistically and contextually. The method used in this study is Research and Development. In this R&D methods is used 4STMD. There are four steps done on the development of teaching materials, the selection step, structuring step, characterization, and didactic reduction. Selection step includes the selection of indicators in accordance with the demands of the curriculum which is then developed with the selection of concepts and values that are integrated with the concept of science. Structuring step includes make macro structures, concept maps, and multiple representations. Characterization's step includes preparation instruments, then  trial to students to identify difficult concepts. The last, didactic reduction was done by neglect and the annotations in the form of sketches.The test results readability aspect instructional materials lead to the conclusion that by determining the main idea, the legibility of teaching materials reached 67%, with moderate readability criteria. Test results of feasibility aspects based on the results of questionnaires to the 11 teachers lead to the conclusion that the overall, level of eligibility teaching materials reached 91% with the eligibility criteria well. Keywords: teaching materials; energy; 4STMD Abstrak Penelitian ini bertujuan untuk menghasilkan bahan ajar IPA SMP pada tema Energi dalam Tubuh menggunakan metode Four Steps Teaching Material Development (4STMD). Materi disajikan secara terpadu sehingga memacu siswa untuk berpikir secara holistik dan kontekstual. Metode penelitian yang digunakan pada penelitian ini adalah metode penelitian dan pengembangan. Dalam penelitian dan pengembangan yang ini, digunakan metode Four Steps Teaching Material Development (4STMD). Terdapat empat tahap yang dilakukan pada pengembangan bahan ajar, yakni tahap seleksi, strukturisasi, karakterisasi, dan reduksi didaktik. Tahap seleksi meliputi pemilihan indikator yang sesuai dengan tuntutan kurikulum yang kemudian dikembangkan dengan pemilihan konsep dan nilai yang diintegrasikan dengan konsep IPA. Tahap strukturisasi meliputi pembuatan struktur makro, peta konsep, dan multipel representasi dari materi. Tahap karakterisasi meliputi penyusunan instrumen karakterisasi, kemudian uji coba kepada siswa untuk mengidentifikasi konsep sulit. Tahap terakhir, yaitu reduksi didaktik konsep terhadap konsep sulit. Reduksi didaktik yang dilakukan berupa pengabaian dan penggunaan penjelasan berupa sketsa. Hasil uji aspek keterbacaan bahan ajar menghasilkan kesimpulan bahwa berdasarkan penentuan ide pokok, keterbacaan bahan ajar mencapai 67%, dengan kriteria keterbacaan tinggi. Hasil uji aspek kelayakan berdasarkan hasil angket terhadap 11 orang guru menghasilkan kesimpulan bahwa secara keseluruhan tingkat kelayakan bahan ajar mencapai 91% dengan kriteria kelayakan baik sekali. Kata Kunci: bahan ajar; energi; 4STMD  Permalink/DOI: http://dx.doi.org/10.15408/es.v8i2.2039  

HUBUNGAN UMUR DAN PARITAS DENGAN PEMILIHAN ALAT KONTRASEPSI METODE OPERASI WANITA (MOW) DI POLIKLINIK KEBIDANAN RS BHAYANGKARA PALEMBANG TAHUN 2012

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Y. Widyastuti Y. Widyastuti
Keyword(s):  
Family Planning ◽  
Medical Records ◽  
Test Results ◽  
Family Planning Services ◽  
Chi Square ◽  
Cross Sectional ◽  
Planning Methods ◽  
Chi Square Test ◽  
Family Planning Methods ◽  
Selection Of

  ABSTRACT [In advanced countries the number of permanent contraception option ( kontap ) approximately 10 % of all national family planning methods , while in Indonesia reached approximately 5.7 % . Based on data obtained from medical records Bhayangkara Hospital Palembang in 2010 the number of achievement when seen from the percentage of contraceptive use is only 9.10 % The purpose of this study is known age and parity relationship with the selection of contraceptive methods Surgery Women ( MOW ) in Palembang RS.Bhayangkara obstetrics clinic in 2012 . This study uses the analytic survey with cross sectional approach . The population in this study were women who become new acceptors were recorded in medical records at the hospital . Palembang Bhayangkara Hospitals January 1, 2012 to December 31 in 2012 . The sample in this study is part of a whole number of new acceptors ( either using contraception methods MOW and other family planning methods ) were registered in the hospital . Palembang Police Hospitals of January 1, 2012 to December 31 years of data 2012.Analisa univariate and bivariate statistical Chi - Square test with significance level α = 0.05 . The results showed there were 80 respondents ( 46.3 % ) who became MOW contraceptive acceptors , acceptors who have old age by 45 respondents ( 56.3 % ) and who has a young age by 35 respondents ( 43.8 % ) . acceptors which have high parity were 44 respondents ( 55 % ) who had low parity and a total of 36 respondents ( 45 % ) . From the results of Chi-square test value obtained ρ = 0.00 is smaller than α = 0.05 . There is a significant correlation between age and the selection of MOW Chi square test results obtained ρ value = 0.00 and there was a significant association between parity with the election MOW Chi square test results obtained ρ value = 0 , . From these results , it is expected to power health, especially family planning services at the hospital . Palembang Police Hospitals in order to improve the quality of family planning services in an effective, efficient , and safe are considered particularly suitable for users of contraception OperatingMethodWomen(MOW).                                      ABSTRAK Di negara sudah maju jumlah pilihan kontrasepsi mantap (kontap) sekitar 10% dari semua metode KB nasional, sedangkan di Indonesia baru mencapai sekitar 5,7 %. Berdasarkan data yang diperoleh dari Rekam medik  Rumah Sakit Bhayangkara Palembang tahun 2010 Jumlah pencapain tersebut jika dilihat dari persentasi penggunaan kontrasepsi MOW hanya  9,10% Tujuan penelitian ini adalah diketahuinya hubungan umur dan paritas dengan pemilihan alat kontrasepsi Metode Operasi Wanita (MOW) di poliklinik kebidanan RS.Bhayangkara Palembang Tahun 2012. Penelitian ini menggunakan metode survey analitik dengan pendekatan cross sectional. Populasi dalam penelitian ini adalah wanita yang menjadi akseptor KB Baru yang tercatat di rekam medik  di RS. Bhayangkara Palembang tanggal 1 januari 2012 sampai dengan 31 Desember  tahun 2012. Sampel dalam penelitian ini adalah sebagian dari seluruh jumlah akseptor KB Baru (baik yang menggunakan alat kontrasepsi Metode MOW maupun Metode KB lain) yang teregister di RS. Bhayangkara Palembang dari tanggal 1 januari 2012 sampai dengan 31 Desember  tahun 2012.Analisa data dilakukan secara univariat dan bivariat dengan uji statistik Chi-Square dengan tingkat kemaknaan α = 0,05. Hasil penelitian menunjukkan dari 80 responden terdapat (46,3%) yang menjadi akseptor kontrasepsi MOW, akseptor yang memiliki umur tua sebanyak 45 responden (56,3%) dan yang memiliki  umur muda sebanyak 35 responden (43,8%). akseptor yang memiliki paritas tinggi sebanyak 44 responden  (55%) dan yang memiliki  paritas rendah sebanyak 36 responden (45%). Dari hasil uji Chi square didapatkan ρ value = 0,00 lebih kecil dari α = 0,05. Ada hubungan yang bermakna antara umur dengan pemilihan MOW dari hasil uji Chi square didapatkan ρ value = 0,00 dan ada hubungan yang bermakna antara paritas dengan pemilihan MOW hasil uji Chi square didapatkan ρ value = 0,.Dari hasil penelitian ini, diharapkan kepada tenaga kesehatan khususnya pelayanan KB  di RS. Bhayangkara Palembang  agar dapat meningkatkan kualitas pelayanan KB secara efektif, efisien, dan aman yang dianggap cocok bagi penggunanya khususnya mengenai kontrasepsi Metode Operasi Wanita (MOW).    

STUDY OF INACCURACY IN THE OPERATION OF THE MAIN CONTROLLER OF STB MACHINE

2019 ◽  
Keyword(s):  
Normal Distribution ◽  
Stable Process ◽  
Random Errors ◽  
Actual Length ◽  
Experimental Data Processing ◽  
Set Up ◽  
Main Regulator ◽  
Transmission Gear ◽  
Selection Of

At production of fabrics, including fabrics for agricultural purpose, an important role is played by the cor-rect adjustment of operation of machine main regulator. The quality of setup of machine main controller is determined by the proper selection of rotation angle of warp beam weaving per one filling thread. In the pro-cess of using the regulator as a result of mistakes in adjustment, wear of transmission gear and backlashes in connections of details there are random changes in threads length. The purpose of the article is the research of property of random errors of basis giving by STB machine regulator. Mistakes can be both negative, and positive. In case of emergence only negative or only positive mistakes operation of the machine becomes im-possible as there will be a consecutive accumulation of mistakes. As a result of experimental data processing for stable process of weaving and the invariable diameter of basis threads winding of threads it is revealed that the random error of giving is set up as linear function of the accidental length having normal distribution. Measurements of accidental deviations in giving of a basis by the main regulator allowed to construct a curve of normal distribution of its actual length for one pass of weft thread. The presented curve of distribution of random errors in giving of a basis is the displaced curve of normal distribution of the accidental sizes. Also we define the density of probability of normal distribution of basis giving errors connected with a margin er-ror operation of the main regulator knowing of which allows to plan ways of their decrease that is important for improvement of quality of the produced fabrics.

scholarly journals Car braking effectiveness after adaptation for drivers with motor dysfunctions

2021 ◽  
Vol 11 (1) ◽  
pp. 617-623
Author(s):  
Adam Sowiński ◽  
Tomasz Szczepański ◽  
Grzegorz Koralewski
Keyword(s):  
Efficiency Index ◽  
Mathematical Function ◽  
Test Results ◽  
Braking Performance ◽  
Braking System ◽  
System Adaptation ◽  
Parametric Description ◽  
Limited Power ◽  
Braking Force ◽  
Selection Of

Abstract This article presents the results of measurements of the braking efficiency of vehicles adapted to be operated by drivers with motor dysfunctions. In such cars, the braking system is extended with an adaptive device that allows braking with the upper limb. This device applies pressure to the original brake in the car. The braking force and thus its efficiency depend on the mechanical ratio in the adapting device. In addition, braking performance depends on the sensitivity of the car’s original braking system and the maximum force that a disabled person can exert on the handbrake lever. Such a person may have limited power in the upper limbs. The force exerted by the driver can also be influenced by the position of the driver’s seat in relation to the handbrake lever. This article describes the research aimed at understanding the influence of the above-mentioned factors on the car braking performance. As a part of the analysis of the test results, a mathematical function was proposed that allows a parametric description of the braking efficiency index on the basis of data on the braking system, adaptation device, driver’s motor limitations, and the position of the driver’s seat. The information presented in this article can be used for the preliminary selection of adaptive devices to the needs of a given driver with a disability and to the vehicle construction.

What Every Neuropathologist Needs to Know: Practical Aspects and Pitfalls in Molecular Diagnosis of Brain Tumors

2021 ◽  
Author(s):  
J Stephen Nix ◽  
Cristiane M Ida
Keyword(s):  
Brain Tumors ◽  
Molecular Diagnosis ◽  
Genetic Alterations ◽  
Genetic Alteration ◽  
Molecular Testing ◽  
Test Results ◽  
Molecular Test ◽  
Molecular Tests ◽  
Clinically Significant ◽  
Selection Of

Abstract Molecular testing has become part of the routine diagnostic workup of brain tumors after the implementation of integrated histomolecular diagnoses in the 2016 WHO classification update. It is important for every neuropathologist to be aware of practical preanalytical, analytical, and postanalytical factors that impact the performance and interpretation of molecular tests. Prior to testing, optimizing tumor purity and tumor amount increases the ability of the molecular test to detect the genetic alteration of interest. Recognizing basic molecular testing platform analytical characteristics allows selection of the optimal platform for each clinicopathological scenario. Finally, postanalytical considerations to properly interpret molecular test results include understanding the clinical significance of the detected genetic alteration, recognizing that detected clinically significant genetic alterations are occasionally germline constitutional rather than somatic tumor-specific, and being cognizant that recommended and commonly used genetic nomenclature may differ. Potential pitfalls in brain tumor molecular diagnosis are also discussed.

A Design Guide for Estimating Speed Made Good for a Sailing Yacht

1981 ◽  
Author(s):  
Deborah W. Berman
Keyword(s):  
Numerical Data ◽  
Quantitative Information ◽  
Test Results ◽  
Standard Series ◽  
Hull Form ◽  
Design Guide ◽  
Current Design ◽  
Sailing Yacht ◽  
Pencil And Paper ◽  
Selection Of

This study develops a simplified comparative procedure for use in preliminary yacht design to predict Equilibrium sideforce, resistance, leeway angle and speed made good to windward for a canoe hull sailing yacht within specific form parameters on any of five standard series keels. These forces, angles and speeds are predicted for any yacht hull resembling one of nine models - ranging from light to medium-heavy length to displacement ratio - (190 to 351) - of the Delft Systematic Series for which there is numerical data. The forces are calculated at speed to length ratio of 1. 3 and heel angle of 30° to enable the designer to make use of existing comparative sail plan and rigging data. The five keels of varying aspect and area ratio, spanning current design practice, are part of a matrix developed at the Davidson Laboratory. In this paper, a canoe yacht hull form similar to Model 7 of the Delft Series is tank tested on 3 Standard Series keels and compared to results obtained from testing a 5.5 m hull, which is similar to Model 8, on the same keels. A prediction procedure is developed and checked against test results. A few Equations, selected values from included tabulations, a calculator, pencil and paper will yield quantitative information for the yacht designer in the selection of a keel for the hull of a sailing yacht.

Development and Verification of Modeling Practice for CFD Decay Calculations to Obtain Roll Damping of FPSO

2021 ◽  
Author(s):  
Arjen Koop ◽  
Pierre Crepier ◽  
Sebastien Loubeyre ◽  
Corentin Dobral ◽  
Kai Yu ◽  
...  
Keyword(s):  
Model Test ◽  
Test Results ◽  
Cfd Modelling ◽  
Roll Damping ◽  
Natural Period ◽  
Computational Mesh ◽  
Safety Studies ◽  
Offshore Industry ◽  
Decay Tests ◽  
Set Up

Abstract Estimates for roll damping are important input parameters for simulation studies on vessels operating at sea, e.g. FPSO mooring in waves, wind and current, workability and operability investigations, Dynamic Position studies, ship-to-ship operations and safety studies of vessels. To accurately predict the motions of vessels this quantity should be determined with confidence in the values. Traditionally, model experiments in water basins using so-called decay tests are carried out to determine the roll damping. With recent advancements in CFD modelling, the offshore industry has started using CFD as an alternative tool to compute the roll damping of FPSO’s. In order to help adopt CFD as a widely accepted tool, there is a need to develop confidence in CFD predictions. Therefore, a practical CFD modelling practice is developed within the Reproducible CFD JIP for roll decay CFD simulations. The Modelling Practice describes the geometry modelling, computational mesh, model set-up and post-processing for these type of CFD calculations. This modelling practice is verified and validated by three independent verifiers against available model test data. This paper provides an overview of the developed modelling practice and the calculated CFD results from the verifiers. The CFD modelling practice is benchmarked against available model test results for a tanker-shaped FPSO. By following this modelling practice, the CFD predictions for the equivalent linear damping coefficient and natural period of the roll motions are within 10% for all verifiers and within 10% from the model test results. Therefore, we conclude that when following the developed modelling practice for roll decay simulations, reliable, accurate and reproducible results can be obtained for the roll damping of tanker-shaped FPSOs.

GIS Based Multi-Criteria decision support system and machine learning for Hospital Site Selection case study Oran - Algeria

2022 ◽  
Vol 14 (1) ◽  
pp. 0-0
Keyword(s):  
Site Selection ◽  
Decision Makers ◽  
Analysis Method ◽  
Automatic Learning ◽  
Hospital Site ◽  
Set Up ◽  
High Level ◽  
Selection Of ◽  
The Ideal

The selection of hospital sites is one of the most important choice a decision maker has to take so as to resist the pandemic. The decision may considerably affect the outbreak transmission in terms of efficiency , budget, etc. The main targeted objective of this study is to find the ideal location where to set up a hospital in the willaya of Oran Alg. For this reason, we have used a geographic information system coupled to the multi-criteria analysis method AHP in order to evaluate diverse criteria of physiological positioning , environmental and economical. Another objective of this study is to evaluate the advanced techniques of the automatic learning . the method of the random forest (RF) for the patterning of the hospital site selection in the willaya of Oran. The result of our study may be useful to decision makers to know the suitability of the sites as it provides a high level of confidence and consequently accelerate the power to control the COVID19 pandemic.

Sign in / Sign up

Export Citation Format

Share Document