scholarly journals A Review on Thermoplastic or Thermosetting Polymeric Matrices Used in Polymeric Composites Manufactured with Banana Fibers from the Pseudostem

2020 ◽  
Vol 10 (9) ◽  
pp. 3023
Author(s):  
Deesy G. Pinto ◽  
João Rodrigues ◽  
Luís Bernardo
Keyword(s):  
Natural Fibers ◽  
Tensile Modulus ◽  
Polymeric Composites ◽  
Degree Of Polymerization ◽  
Cellulose Content ◽  
Polymeric Matrices ◽  
Banana Fibers ◽  
Wide Range ◽  
Microfibrillar Angle ◽  
The Impact

Recent manufacturing advancements have led to the fabrication of polymeric composites (PC) reinforced with fibers. However, to reduce the impact on the environment, efforts have been made to replace synthetic fibers (SF) by natural fibers (NF) in many applications. NF, e.g., as banana fibers (BF) possess higher cellulose content, a higher degree of polymerization of cellulose, and a lower microfibrillar angle (MFA), which are crucial factors for the mechanical properties (MP), namely tensile modulus (TM) and tensile strength (TS), and many other properties that make them suitable for the reinforcement of PC. This review paper presents an attempt to highlight some recent findings on the MP of PC reinforced with unmodified or modified BF (UBF, MBF), which were incorporated into unmodified or modified (synthetic (SPM) or a bio (BPM)) polymeric matrices (UPM, MPM). The experimental results from previous studies are presented in terms of the variation in the percentage of the MP and show that BF can improve the MP of PC. The results of such studies suggest the possibility to extend the application of PC reinforced with BF (PCBF) in a wide range, namely from automotive to biomedical fields. The meanings of all the acronyms are listed in the abbreviations section.

Tuning the Mechanical and Geometric Properties of Electrochemically Aligned Collagen Threads Towards Applications in Biohybrid Robotics

2021 ◽  
Author(s):  
Wenhuan Sun ◽  
Jason Paulovich ◽  
Victoria Webster-Wood
Keyword(s):  
Tensile Modulus ◽  
Solution Concentration ◽  
Cross Sectional ◽  
Geometric Properties ◽  
Wide Range ◽  
Crosslinker Concentration ◽  
High Degree ◽  
The Impact ◽  
Fabrication Parameters ◽  
Manufacturing Parameters

Abstract Electrochemically Aligned Collagen (ELAC) threads fabricated by the isoelectric focusing (IF) of collagen have previously shown potential in tissue engineering and more recently in the fabrication of biohybrid robot structures. For applications in biohybrid robotics, ELAC structures are needed that are both robust and compliant enough to facilitate muscle actuation. However, studies on the effects of IF parameters, and the interactions of such fabrication parameters, on the mechanical and geometric properties of resulting ELAC threads have not been previously found in literature. Understanding the impact of these manufacturing parameters on the material properties is critical to facilitate biohybrid robot design. In this study, the effects of IF duration, IF voltage, and collagen solution concentration were investigated and showed statistically significant effects on adjusting ELAC properties via single-factor experiments. The interactions between parameters exhibited significant joint effects on ELAC property tuning through two-factor experiments. Scanning electron microscopy and 2,4,6-trinitrobenzenesulfonic assays revealed the correlation between high mechanical properties and a combination of low porosity and high degree of crosslinking. By simply tuning IF parameters without changing other fabrication steps, such as crosslinker concentration, ELAC threads with a wide range of mechanical and geometric properties were fabricated. The average tensile modulus of the resulting ELAC threads ranged from 198±90 to 758±138 MPa. The average cross-sectional area ranged from 7756±1000 to 1775±457 µm2. The resultant mapping between IF parameters and ELAC thread properties enabled the production of strong and flexible threads with customizable properties.

scholarly journals Evaluation of Mechanical and Interfacial Properties of Bio-Composites Based on Poly(Lactic Acid) with Natural Cellulose Fibers

2019 ◽  
Vol 20 (4) ◽  
pp. 960 ◽  
Author(s):  
Laura Aliotta ◽  
Vito Gigante ◽  
Maria Coltelli ◽  
Patrizia Cinelli ◽  
Andrea Lazzeri
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Agricultural Waste ◽  
Natural Fibers ◽  
Analytical Models ◽  
Poly Lactic Acid ◽  
Polymeric Matrices ◽  
Cellulosic Fibers ◽  
Natural Cellulose ◽  
Wide Range

The circular economy policy and the interest for sustainable material are inducing a constant expansion of the bio-composites market. The opportunity of using natural fibers in bio-based and biodegradable polymeric matrices, derived from industrial and/or agricultural waste, represents a stimulating challenge in the replacement of traditional composites based on fossil sources. The coupling of bioplastics with natural fibers in order to lower costs and promote degradability is one of the primary objectives of research, above all in the packaging and agricultural sectors where large amounts of non-recyclable plastics are generated, inducing a serious problem for plastic disposal and potential accumulation in the environment. Among biopolymers, poly(lactic acid) (PLA) is one of the most used compostable, bio-based polymeric matrices, since it exhibits process ability and mechanical properties compatible with a wide range of applications. In this study, two types of cellulosic fibers were processed with PLA in order to obtain bio-composites with different percentages of microfibers (5%, 10%, 20%). The mechanical properties were evaluated (tensile and impact test), and analytical models were applied in order to estimate the adhesion between matrix and fibers and to predict the material’s stiffness. Understanding these properties is of particular importance in order to be able to tune and project the final characteristics of bio-composites.

Mechanical and Thermal Properties of Polyamide 6 Nanocomposite Toughened with Epoxidised Natural Rubber-25

2011 ◽  
Vol 471-472 ◽  
pp. 518-523 ◽  
Author(s):  
Nematzadeh Navid ◽  
Uzir Wahit Mat ◽  
Hassan Azman ◽  
Mahmoudian Shaya
Keyword(s):  
Thermal Properties ◽  
Natural Rubber ◽  
Tensile Modulus ◽  
Polyamide 6 ◽  
Mechanical And Thermal Properties ◽  
Gravimetric Analysis ◽  
Wide Range ◽  
Injection Molded ◽  
The Impact ◽  
Thermal Stability Of

Polyamide (PA6) is an engineering plastic with wide range of applications and the development in the field of montmorillonite (MMT) filled polymer nanocomposites has resulted in the development of PA6/MMT nanocomposites. However, MMT filled PA6 nanocomposites are notch sensitive and brittle at low temperatures, which posed as a major setback for many of its applications. The main objective of this study is to enhance the toughness of PA6/MMT (100/4) nanocomposites with epoxidised natural rubber-25 (ENR25). The ENR-25 content in the composites ranged from 15 to 30 wt%. The PA6/ENR/MMT nanocomposites were extruded and injection molded into tensile and impact test samples. The addition of ENR25 into PA6/MMT nanocomposites improved the impact strength of the nanocomposites while tensile modulus and tensile strength decreased with increasing ENR25 content. The thermal properties of PA6/ENR/MMT nanocomposites were also investigated via thermal gravimetric analysis (TGA). Both T10% and derivative thermal analysis (DTA) determined the lower thermal stability of PA6/MMT nanocomposites after addition of ENR.

THE IMPACT OF LEADERSHIP PRACTICES TO TEAM MEMBERS’ SATISFACTION

2009 ◽  
Vol 8 (1) ◽  
Author(s):  
Chalimah .
Keyword(s):  
Conflict Resolution ◽  
Leadership Practices ◽  
Hotel Industry ◽  
Leader Behavior ◽  
Team Leader ◽  
Shop Floor ◽  
Team Members ◽  
Top Executives ◽  
Wide Range ◽  
The Impact

eamwork is becoming increasingly important to wide range of operations. It applies to all levels of the company. It is just as important for top executives as it is to middle management, supervisors and shop floor workers. Poor teamwork at any level or between levels can seriously damage organizational effectiveness. The focus of this paper was therefore to examine whether leadership practices consist of team leader behavior, conflict resolution style and openness in communication significantly influenced the team member’s satisfaction in hotel industry. Result indicates that team leader behavior and the conflict resolution style significantly influenced team member satisfaction. It was surprising that openness in communication did not affect significantly to the team members’ satisfaction.

Stress, anxiety, depression and burnout in frontline health care workers during COVID-19 pandemic: a brief systematic review and new data from Russia

2021 ◽  
Author(s):  
Ekaterina Mosolova ◽  
Dmitry Sosin ◽  
Sergey Mosolov
Keyword(s):  
Risk Factors ◽  
Systematic Review ◽  
Female Gender ◽  
Assessment Tools ◽  
Care Workers ◽  
Younger Age ◽  
Wide Range ◽  
Associated Risk Factors ◽  
Anxiety Depression ◽  
The Impact

During the COVID-19 pandemic, healthcare workers (HCWs) have been subject to increased workload while also exposed to many psychosocial stressors. In a systematic review we analyze the impact that the pandemic has had on HCWs mental state and associated risk factors. Most studies reported high levels of depression and anxiety among HCWs worldwide, however, due to a wide range of assessment tools, cut-off scores, and number of frontline participants in the studies, results were difficult to compare. Our study is based on two online surveys of 2195 HCWs from different regions of Russia during spring and autumn epidemic outbreaks revealed the rates of anxiety, stress, depression, emotional exhaustion and depersonalization and perceived stress as 32.3%, 31.1%, 45.5%, 74.2%, 37.7% ,67.8%, respectively. Moreover, 2.4% of HCWs reported suicidal thoughts. The most common risk factors include: female gender, nurse as an occupation, younger age, working for over 6 months, chronic diseases, smoking, high working demands, lack of personal protective equipment, low salary, lack of social support, isolation from families, the fear of relatives getting infected. These results demonstrate the need for urgent supportive programs for HCWs fighting COVID-19 that fall into higher risk factors groups.

A MODELING SYSTEM FOR CLIMATE CHANGE RISK ASSESSMENT, MANAGEMENT AND HEDGING IN COASTAL AREAS

2017 ◽  
Author(s):  
Sergei Soldatenko ◽  
Sergei Soldatenko ◽  
Genrikh Alekseev ◽  
Genrikh Alekseev ◽  
Alexander Danilov ◽  
...  
Keyword(s):  
Climate Change ◽  
Risk Assessment ◽  
Coastal Areas ◽  
Mitigation Strategies ◽  
System Structure ◽  
The Arctic ◽  
Risk Modeling ◽  
Wide Range ◽  
Adverse Weather ◽  
The Impact

Every aspect of human operations faces a wide range of risks, some of which can cause serious consequences. By the start of 21st century, mankind has recognized a new class of risks posed by climate change. It is obvious, that the global climate is changing, and will continue to change, in ways that affect the planning and day to day operations of businesses, government agencies and other organizations and institutions. The manifestations of climate change include but not limited to rising sea levels, increasing temperature, flooding, melting polar sea ice, adverse weather events (e.g. heatwaves, drought, and storms) and a rise in related problems (e.g. health and environmental). Assessing and managing climate risks represent one of the most challenging issues of today and for the future. The purpose of the risk modeling system discussed in this paper is to provide a framework and methodology to quantify risks caused by climate change, to facilitate estimates of the impact of climate change on various spheres of human activities and to compare eventual adaptation and risk mitigation strategies. The system integrates both physical climate system and economic models together with knowledge-based subsystem, which can help support proactive risk management. System structure and its main components are considered. Special attention is paid to climate risk assessment, management and hedging in the Arctic coastal areas.

The Management of Post-Tonsillectomy Morbidity in Patients With Sleep Apnoea

2019 ◽  
Vol 70 (10) ◽  
pp. 3738-3740
Keyword(s):  
Day Surgery ◽  
Sleep Apnoea ◽  
Integrative Approach ◽  
Multicenter Studies ◽  
Therapeutic Modalities ◽  
Advantages And Disadvantages ◽  
Obstructive Sleep ◽  
Wide Range ◽  
The Impact ◽  
Surgery Center

The Tonsillectomy in children or adults is an intervention commonly encountered in the ENT (Ear Nose and Throat) and Head and Neck surgeon practice. The current tendency is to perform this type of surgery in major ambulatory surgery centers. Two objectives are thus pursued: first of all, the increase of the patient quality of life through the reintegration into the family as quickly as possible and secondly, the expenses associated with continuous hospitalization are reduced. Any tertiary (multidisciplinary) sleep center must ensure the complete diagnosis and treatment (including surgery) of sleep respiratory disorders. Under these conditions the selection of patients and especially the implementation of the specific protocols in order to control the postoperative complications it becomes essential. The present paper describes our experience of tonsillectomy as treatment for selected patients with chronic rhonchopathy (snoring) and mild to moderate obstructive sleep apnoea. It was presented the impact of antibiotics protocols in reducing the main morbid outcomes following tonsillectomy, in our day surgery center. The obtained results can also be a prerequisite for the integrative approach of the patients with sleep apnoea who were recommended surgical treatment. Considering the wide range of therapeutic modalities used in sleep apnoea, each with its specific advantages and disadvantages, more extensive and multicenter studies are needed. Keywords: post-tonsillectomy morbidity, day surgery center, sleep disorders

Cognitive Impact of Cerebellar Damage: Is There a Future for Cognitive Rehabilitation?

2018 ◽  
Vol 17 (3) ◽  
pp. 199-206 ◽  
Author(s):  
Kim van Dun ◽  
Frank V. Overwalle ◽  
Mario Manto ◽  
Peter Marien
Keyword(s):  
Affective Disorders ◽  
Cognitive Rehabilitation ◽  
Therapeutic Interventions ◽  
Posterior Fossa Surgery ◽  
Daily Life Activities ◽  
Wide Range ◽  
Affective Deficits ◽  
Cerebellar Injury ◽  
Cognitive Therapies ◽  
The Impact

Background & Objective: During the past 3 decades, numerous neurophysiological, neuroimaging, experimental and clinical studies have evidenced a crucial role for the cerebellum in cognitive, affective and behavioral functions. As a result of the acknowledged modulatory role of the cerebellum upon remote structures such as the cerebral cortex, cerebellar injury may give rise to a constellation of behavioral, affective and cognitive symptoms (Schmahmann's Syndrome). In sharp contrast to the wide range of therapeutic interventions to treat cognitive and affective disorders following cerebral cortical lesions and despite the consequences of Schmahmann’s syndrome upon daily life activities, the literature is surprisingly only scantly documented with studies investigating the impact of cognitive therapies on cerebellar induced cognitive and affective disorders. This survey aims to present an overview of the therapeutic interventions available in the literature as a possible treatment for Schmahmann’s Syndrome after cerebellar injury, after posterior fossa surgery in children, and in children with neurodevelopmental disorders. Although systematical studies are clearly warranted, available evidence suggests that cerebellar-induced cognitive and affective disorders should be treated in a specific way. Approaches where the patients are explicitly made aware of their deficits and are considered to act as an “external cerebellum” are the most promising. Conclusion: The study of the anatomical connectivity of the cerebellar microcomplexes involved in cognitive/affective deficits is likely to play a major-role in the future.

Religion and Medicine

2020 ◽  
Author(s):  
Jeff Levin ◽  
Stephen G. Post
Keyword(s):  
Clinical Decision Making ◽  
Well Being ◽  
Clinical Decision ◽  
Religion And Medicine ◽  
Physical And Mental Health ◽  
Faith Based ◽  
Baylor University ◽  
Wide Range ◽  
History Of ◽  
The Impact

In Religion and Medicine, Dr. Jeff Levin, distinguished Baylor University epidemiologist, outlines the longstanding history of multifaceted interconnections between the institutions of religion and medicine. He traces the history of the encounter between these two institutions from antiquity through to the present day, highlighting a myriad of contemporary alliances between the faith-based and medical sectors. Religion and Medicine tells the story of: religious healers and religiously branded hospitals and healthcare institutions; pastoral professionals involved in medical missions, healthcare chaplaincy, and psychological counseling; congregational health promotion and disease prevention programs and global health initiatives; research studies on the impact of religious and spiritual beliefs and practices on physical and mental health, well-being, and healing; programs and centers for medical research and education within major universities and academic institutions; religiously informed bioethics and clinical decision-making; and faith-based health policy initiatives and advocacy for healthcare reform. Religion and Medicine is the first book to cover the full breadth of this subject. It documents religion-medicine alliances across religious traditions, throughout the world, and over the course of history. It summarizes a wide range of material of relevance to historians, medical professionals, pastors and theologians, bioethicists, scientists, public health educators, and policymakers. The product of decades of rigorous and focused research, Dr. Levin has produced the most comprehensive history of these developments and the finest introduction to this emerging field of scholarship.

Textual Transformations

2019 ◽  
Keyword(s):  
Early Modern ◽  
Financial Incentives ◽  
Book History ◽  
John Dryden ◽  
Book Production ◽  
Original Essays ◽  
Wide Range ◽  
Lucy Hutchinson ◽  
The Many ◽  
The Impact

This collection of twelve original essays by an international team of eminent scholars in the field of book history explores the many ways in which early modern books were subject to reworking, re-presentation, revision and reinterpretation. Their history is often the history of multiple, sometimes competing, agencies as their texts were re-packaged, redirected and transformed in ways that their original authors might hardly recognize. The essays discuss the processes of editing, revision, redaction, selection, abridgement, glossing, disputation, translation and posthumous publication that resulted in a textual elasticity and mobility that could dissolve distinctions between text and paratexts, textuality and intertextuality, manuscript and print, author and reader or editor, such that title and author’s name are no longer sufficient pointers to a book’s identity or contents. The essays are alive to the impact of commercial and technological aspects of book production and distribution (discussing, for example, the career of the pre-eminent bookseller John Nourse, the market appeal of abridgements, and the financial incentives to posthumous publication), but their interest is also in the many additional forms of agency that shaped texts and their meanings as books were repurposed to articulate, and respond to, a variety of cultural and individual needs. They engage with early modern religious, political, philosophical and scholarly trends and debates as they discuss a wide range of genres and kinds of publication (including fictional and non-fictional prose, verse miscellanies, abridgements, sermons, religious controversy) and of authors and booksellers (including Lucy Hutchinson, Richard Baxter, Thomas Burnet, Elizabeth Rowe, John Dryden, and Samuel Taylor Coleridge, Lucy Hutchinson, Henry Maundrell, John Nourse; Jonathan Swift, Samuel Richardson, John Tillotson, Isaac Watts and John Wesley).

Sign in / Sign up

Export Citation Format

Share Document