scholarly journals Development of a Component-Level Hydrogen Transport Model with OpenFOAM and Application to Tritium Transport Inside a DEMO HCPB Breeder

2021 ◽  
Vol 11 (8) ◽  
pp. 3481
Author(s):  
Volker Pasler ◽  
Frederik Arbeiter ◽  
Christine Klein ◽  
Dmitry Klimenko ◽  
Georg Schlindwein ◽  
...  
Keyword(s):  
Transport Model ◽  
Tritium Concentration ◽  
Minor Role ◽  
Specific Rate ◽  
Component Level ◽  
Diffusion Limited ◽  
Purge Gas ◽  
Choice Of Species ◽  
The Impact ◽  
Tritium Transport

This work continues the development of a numerical model to simulate transient tritium transport on the breeder zone (BZ) level for the EU helium-cooled pebble bed (HCPB) concept for DEMO. The basis of the model is the open-source field operation and manipulation framework, OpenFOAM. The key output quantities of the model are the tritium concentration in the purge gas and in the coolant and the tritium inventory inside the BZ structure. New model features are briefly summarized. As a first relevant application a simulation of tritium transport for a single pin out of the KIT HCPB design for DEMO is presented. A variety of scenarios investigates the impact of the permeation regime (diffusion-limited vs. surface-limited), of an additional hydrogen content of 300 Pa H2 in the purge gas, of the released species (HT vs. T2), and of the choice of species-specific rate constants (recombination constant of HT set twice as for H2 and T2). The results indicate that the released species plays a minor role for permeation. Both permeation and inventory show a considerable dependence on a possible hydrogen addition in the purge gas. An enhanced HT recombination constant reduces steel T inventories and, in the diffusion-limited case, also permeation significantly. Scenarios with 80 bar vs. 2 bar purge gas pressure indicate that purge gas volumetric flow is decisive for permeation.

scholarly journals The Environmental Effects of the April 2020 Wildfires and the Cs-137 Re-Suspension in the Chernobyl Exclusion Zone: A Multi-Hazard Threat

Atmosphere ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 467
Author(s):  
Rocío Baró ◽  
Christian Maurer ◽  
Jerome Brioude ◽  
Delia Arnold ◽  
Marcus Hirtl
Keyword(s):  
Air Quality ◽  
Nuclear Power ◽  
Transport Model ◽  
Atmospheric Transport ◽  
Point Of View ◽  
Plume Dispersion ◽  
Exclusion Zone ◽  
Fire Plume ◽  
Mean Values ◽  
The Impact

This paper demonstrates the environmental impacts of the wildfires occurring at the beginning of April 2020 in and around the highly contaminated Chernobyl Exclusion Zone (CEZ). Due to the critical fire location, concerns arose about secondary radioactive contamination potentially spreading over Europe. The impact of the fire was assessed through the evaluation of fire plume dispersion and re-suspension of the radionuclide Cs-137, whereas, to assess the smoke plume effect, a WRF-Chem simulation was performed and compared to Tropospheric Monitoring Instrument (TROPOMI) satellite columns. The results show agreement of the simulated black carbon and carbon monoxide plumes with the plumes as observed by TROPOMI, where pollutants were also transported to Belarus. From an air quality and health perspective, the wildfires caused extremely bad air quality over Kiev, where the WRF-Chem model simulated mean values of PM2.5 up to 300 µg/m3 (during the first fire outbreak) over CEZ. The re-suspension of Cs-137 was assessed by a Bayesian inverse modelling approach using FLEXPART as the atmospheric transport model and Ukraine observations, yielding a total release of 600 ± 200 GBq. The increase in both smoke and Cs-137 emissions was only well correlated on the 9 April, likely related to a shift of the focus area of the fires. From a radiological point of view even the highest Cs-137 values (average measured or modelled air concentrations and modelled deposition) at the measurement site closest to the Chernobyl Nuclear Power Plant, i.e., Kiev, posed no health risk.

scholarly journals Multi-platform app-embedded model for hybrid air-breathing rocket-cycle engine in hypersonic atmospheric ascent

2021 ◽  
pp. 1-23
Author(s):  
S.E. Tsentis ◽  
V.G. Gkoutzamanis ◽  
A.D. Gaitanis ◽  
A.I. Kalfas
Keyword(s):  
Specific Impulse ◽  
Performance Parameters ◽  
Interested Reader ◽  
Component Level ◽  
Air Breathing ◽  
Evaluation Of Performance ◽  
Embedded Model ◽  
The Impact ◽  
Rocket Technology ◽  
Engine Concept

ABSTRACT This paper presents a performance analysis on a novel engine concept, currently under development, in order to achieve hybrid air-breathing rocket technology. A component-level approach has been developed to simulate the performance of the engine at Mach 5, and the thermodynamic interaction of the different working fluids has been analysed. The bypass ramjet duct has also been included in the model. This facilitates the improved evaluation of performance parameters. The impact of ram drag induced by the intake of the engine has also been demonstrated. The whole model is introduced into a multi-platform application for aeroengine simulation to make it accessible to the interested reader. Results show that the bypass duct modelling increases the overall efficiency by approximately 7%. The model calculates the specific impulse at approximately 1800 seconds, which is 4 times higher than any chemical rocket.

scholarly journals QiOi: Performance Isolation for Hyperledger Fabric

2021 ◽  
Vol 11 (9) ◽  
pp. 3870
Author(s):  
Jeongsu Kim ◽  
Kyungwoon Lee ◽  
Gyeongsik Yang ◽  
Kwanhoon Lee ◽  
Jaemin Im ◽  
...  
Keyword(s):  
Data Centers ◽  
Component Level ◽  
Isolation Technique ◽  
Cloud Data ◽  
Cpu Scheduling ◽  
Performance Isolation ◽  
Cloud Data Centers ◽  
A New Technique ◽  
The Impact ◽  
Level Performance

This paper investigates the performance interference of blockchain services that run on cloud data centers. As the data centers offer shared computing resources to multiple services, the blockchain services can experience performance interference due to the co-located services. We explore the impact of the interference on Fabric performance and develop a new technique to offer performance isolation for Hyperledger Fabric, the most popular blockchain platform. First, we analyze the characteristics of the different components in Hyperledger Fabric and show that Fabric components have different impacts on the performance of Fabric. Then, we present QiOi, component-level performance isolation technique for Hyperledger Fabric. The key idea of QiOi is to dynamically control the CPU scheduling of Fabric components to cope with the performance interference. We implement QiOi as a user-level daemon and evaluate how QiOi mitigates the performance interference of Fabric. The evaluation results demonstrate that QiOi mitigates performance degradation of Fabric by 22% and improves Fabric latency by 2.5 times without sacrificing the performance of co-located services. In addition, we show that QiOi can support different ordering services and chaincodes with negligible overhead to Fabric performance.

scholarly journals Nitrogen Mass Balance and Pressure Impact Model Applied to an Urban Aquifer

Water ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 1171 ◽  
Author(s):  
Mitja Janža ◽  
Joerg Prestor ◽  
Simona Pestotnik ◽  
Brigita Jamnik
Keyword(s):  
Groundwater Quality ◽  
Urban Areas ◽  
Transport Model ◽  
Nitrate Concentration ◽  
Impact Model ◽  
Sewer System ◽  
Management Measures ◽  
Pressure Impact ◽  
The Impact ◽  
The City

The assurance of drinking water supply is one of the biggest emerging global challenges, especially in urban areas. In this respect, groundwater and its management in the urban environment are gaining importance. This paper presents the modeling of nitrogen load from the leaky sewer system and from agriculture and the impact of this pressure on the groundwater quality (nitrate concentration) in the urban aquifer located beneath the City of Ljubljana. The estimated total nitrogen load in the model area of 58 km2 is 334 ton/year, 38% arising from the leaky sewer system and 62% from agriculture. This load was used as input into the groundwater solute transport model to simulate the distribution of nitrate concentration in the aquifer. The modeled nitrate concentrations at the observation locations were found to be on average slightly lower (2.7 mg/L) than observed, and in general reflected the observed contamination pattern. The ability of the presented model to relate and quantify the impact of pressures from different contamination sources on groundwater quality can be beneficially used for the planning and optimization of groundwater management measures for the improvement of groundwater quality.

Analysis of the breakage rate function for selected process parameters in quartzite milling

2012 ◽  
Vol 33 (1) ◽  
pp. 117-129 ◽  
Author(s):  
Tomasz Olejnik
Keyword(s):  
Process Parameters ◽  
Rate Function ◽  
Variable Number ◽  
Specific Rate ◽  
Gardner Equation ◽  
Contact Points ◽  
Batch System ◽  
Grinding Media ◽  
Breakage Rate ◽  
The Impact

Analysis of the breakage rate function for selected process parameters in quartzite milling The paper presents the results of studies on quartzite milling in a ball mill. The milling was conducted in a batch system, for diversified compositions of balls. The milling product was subjected to granulometrical, morphological and strength analyses. On the basis of the developed Reid's theory and using the Austin-Gardner equation, a form of the function circumscribing the specific rate of comminution of selected size fractions was determined. The values of the breakage rate function bi, j for the mill's apparatus conditions were determined. The impact was investigated for a variable number of grinding media contact points on the values of specific rate S and the values of the breakage rate function bi, j. Furthermore, the values of coefficients occurring in the equations circumscribing the specific rate of milling S and breakage parameter bi, j were determined.

The measurement of groundwater temperature in shallow piezometers and standpipes

2005 ◽  
Vol 42 (5) ◽  
pp. 1377-1390 ◽  
Author(s):  
Matthew D Alexander ◽  
Kerry TB MacQuarrie
Keyword(s):  
Finite Element ◽  
Statistical Analysis ◽  
Transport Model ◽  
Shallow Groundwater ◽  
Subsurface Temperature ◽  
Groundwater Temperature ◽  
Monitoring Well ◽  
Laboratory Results ◽  
The Impact

Accurate measurements of in situ groundwater temperature are important in many groundwater investigations. Temperature is often measured in the subsurface using an access tube in the form of a piezometer or monitoring well. The impact of standpipe materials on the conduction of heat into the subsurface has not previously been examined. This paper reports on the results of a laboratory experiment and a field experiment designed to determine if different standpipe materials or monitoring instrument configurations preferentially conduct heat into the shallow sub surface. Simulations with a numerical model were also conducted for comparison to the laboratory results. Statistical analysis of the laboratory results demonstrates that common standpipe materials, such as steel and polyvinylchloride (PVC), do not affect temperature in the subsurface. Simulations with a finite element flow and heat transport model also confirm that the presence of access tube materials does not affect shallow groundwater temperature measurements. Field results show that different instrument configurations, such as piezometers and water and air filled and sealed well points, do not affect subsurface temperature measurements.Key words: groundwater temperature, temperature measurement, conduction, piezometers, piezometer standpipes, thermal modelling.

Impact of the Depth-to-Width Ratio of Periodically Stratified Tidal Channels on the Estuarine Circulation

2015 ◽  
Vol 45 (8) ◽  
pp. 2048-2069 ◽  
Author(s):  
Elisabeth Schulz ◽  
Henk M. Schuttelaars ◽  
Ulf Gräwe ◽  
Hans Burchard
Keyword(s):  
Eddy Viscosity ◽  
Transport Model ◽  
Stable Stratification ◽  
Estuarine Circulation ◽  
Width Ratio ◽  
Cross Sectional ◽  
Tidal Straining ◽  
The Individual ◽  
Periodic Stratification ◽  
The Impact

AbstractThe dependency of the estuarine circulation on the depth-to-width ratio of a periodically, weakly stratified tidal estuary is systematically investigated here for the first time. Currents, salinity, and other properties are simulated by means of the General Estuarine Transport Model (GETM) in cross-sectional slice mode, applying a symmetric Gaussian-shaped depth profile. The width is varied over four orders of magnitude. The individual along-channel circulation contributions from tidal straining, gravitation, advection, etc., are calculated and the impact of the depth-to-width ratio on their intensity is presented and elucidated. It is found that the estuarine circulation exhibits a distinct maximum in medium-wide channels (intermediate depth-to-width ratio depending on various parameters), which is caused by a maximum of the tidal straining contribution. This maximum is related to a strong tidal asymmetry of eddy viscosity and shear created by secondary strain-induced periodic stratification (2SIPS): in medium channels, transverse circulation generated by lateral density gradients due to laterally differential longitudinal advection induces stable stratification at the end of the flood phase, which is further increased during ebb by longitudinal straining (SIPS). Thus, eddy viscosity is low and shear is strong in the entire ebb phase. During flood, SIPS decreases the stratification so that eddy viscosity is high and shear is weak. The circulation resulting from this viscosity–shear correlation, the tidal straining circulation, is oriented like the classical, gravitational circulation, with riverine outflow at the surface and oceanic inflow close to the bottom. In medium channels, it is about 5 times as strong as in wide (quasi one-dimensional) channels, in which 2SIPS is negligible.

scholarly journals Impact of uncertainties in inorganic chemical rate constants on tropospheric composition and ozone radiative forcing

2017 ◽  
Author(s):  
Ben Newsome ◽  
Mat Evans
Keyword(s):  
Rate Constant ◽  
Atmospheric Chemistry ◽  
Rate Constants ◽  
Tropospheric Ozone ◽  
Radiative Forcing ◽  
Transport Model ◽  
Surface Ozone ◽  
Photolysis Rates ◽  
The Impact ◽  
Chemical Rate

Abstract. Chemical rate constants determine the composition of the atmosphere and how this composition has changed over time. They are central to our understanding of climate change and air quality degradation. Atmospheric chemistry models, whether online or offline, box, regional or global use these rate constants. Expert panels synthesise laboratory measurements, making recommendations for the rate constants that should be used. This results in very similar or identical rate constants being used by all models. The inherent uncertainties in these recommendations are, in general, therefore ignored. We explore the impact of these uncertainties on the composition of the troposphere using the GEOS-Chem chemistry transport model. Based on the JPL and IUPAC evaluations we assess 50 mainly inorganic rate constants and 10 photolysis rates, through simulations where we increase the rate of the reactions to the 1σ upper value recommended by the expert panels. We assess the impact on 4 standard metrics: annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime. Uncertainty in the rate constants for NO2 + OH    M →  HNO3, OH + CH4 → CH3O2 + H2O and O3 + NO → NO2 + O2 are the three largest source of uncertainty in these metrics. We investigate two methods of assessing these uncertainties, addition in quadrature and a Monte Carlo approach, and conclude they give similar outcomes. Combining the uncertainties across the 60 reactions, gives overall uncertainties on the annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime of 11, 12, 17 and 17 % respectively. These are larger than the spread between models in recent model inter-comparisons. Remote regions such as the tropics, poles, and upper troposphere are most uncertain. This chemical uncertainty is sufficiently large to suggest that rate constant uncertainty should be considered when model results disagree with measurement. Calculations for the pre-industrial allow a tropospheric ozone radiative forcing to be calculated of 0.412 ± 0.062 Wm−2. This uncertainty (15 %) is comparable to the inter-model spread in ozone radiative forcing found in previous model-model inter-comparison studies where the rate constants used in the models are all identical or very similar. Thus the uncertainty of tropospheric ozone radiative forcing should expanded to include this additional source of uncertainty. These rate constant uncertainties are significant and suggest that refinement of supposedly well known chemical rate constants should be considered alongside other improvements to enhance our understanding of atmospheric processes.

scholarly journals Extending methane profiles from aircraft into the stratosphere for satellite total column validation using the ECMWF C-IFS and TOMCAT/SLIMCAT 3-D model

2017 ◽  
Vol 17 (11) ◽  
pp. 6663-6678 ◽  
Author(s):  
Shreeya Verma ◽  
Julia Marshall ◽  
Mark Parrington ◽  
Anna Agustí-Panareda ◽  
Sebastien Massart ◽  
...  
Keyword(s):  
Greenhouse Gases ◽  
Transport Model ◽  
A Priori ◽  
Atmospheric Composition ◽  
Random Errors ◽  
Chemical Transport Model ◽  
Spatial Coverage ◽  
Forecasting System ◽  
The Impact ◽  
Total Column

Abstract. Airborne observations of greenhouse gases are a very useful reference for validation of satellite-based column-averaged dry air mole fraction data. However, since the aircraft data are available only up to about 9–13 km altitude, these profiles do not fully represent the depth of the atmosphere observed by satellites and therefore need to be extended synthetically into the stratosphere. In the near future, observations of CO2 and CH4 made from passenger aircraft are expected to be available through the In-Service Aircraft for a Global Observing System (IAGOS) project. In this study, we analyse three different data sources that are available for the stratospheric extension of aircraft profiles by comparing the error introduced by each of them into the total column and provide recommendations regarding the best approach. First, we analyse CH4 fields from two different models of atmospheric composition – the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecasting System for Composition (C-IFS) and the TOMCAT/SLIMCAT 3-D chemical transport model. Secondly, we consider scenarios that simulate the effect of using CH4 climatologies such as those based on balloons or satellite limb soundings. Thirdly, we assess the impact of using a priori profiles used in the satellite retrievals for the stratospheric part of the total column. We find that the models considered in this study have a better estimation of the stratospheric CH4 as compared to the climatology-based data and the satellite a priori profiles. Both the C-IFS and TOMCAT models have a bias of about −9 ppb at the locations where tropospheric vertical profiles will be measured by IAGOS. The C-IFS model, however, has a lower random error (6.5 ppb) than TOMCAT (12.8 ppb). These values are well within the minimum desired accuracy and precision of satellite total column XCH4 retrievals (10 and 34 ppb, respectively). In comparison, the a priori profile from the University of Leicester Greenhouse Gases Observing Satellite (GOSAT) Proxy XCH4 retrieval and climatology-based data introduce larger random errors in the total column, being limited in spatial coverage and temporal variability. Furthermore, we find that the bias in the models varies with latitude and season. Therefore, applying appropriate bias correction to the model fields before using them for profile extension is expected to further decrease the error contributed by the stratospheric part of the profile to the total column.

scholarly journals Modeling of photolysis rates over Europe: impact on chemical gaseous species and aerosols

2011 ◽  
Vol 11 (4) ◽  
pp. 1711-1727 ◽  
Author(s):  
E. Real ◽  
K. Sartelet
Keyword(s):  
Air Quality ◽  
Transport Model ◽  
Quantum Yields ◽  
Strong Impact ◽  
Peak Reduction ◽  
Gaseous Species ◽  
Clear Sky ◽  
Photolysis Rate ◽  
Photolysis Rates ◽  
The Impact

Abstract. This paper evaluates the impact of photolysis rate calculation on simulated European air composition and air quality. In particular, the impact of the cloud parametrisation and the impact of aerosols on photolysis rates are analysed. Photolysis rates are simulated using the Fast-JX photolysis scheme and gas and aerosol concentrations over Europe are simulated with the regional chemistry-transport model Polair3D of the Polyphemus platform. The photolysis scheme is first used to update the clear-sky tabulation of photolysis rates used in the previous Polair3D version. Important differences in photolysis rates are simulated, mainly due to updated cross-sections and quantum yields in the Fast-JX scheme. In the previous Polair3D version, clouds were taken into account by multiplying the clear-sky photolysis rates by a correction factor. In the new version, clouds are taken into account more accurately by simulating them directly in the photolysis scheme. Differences in photolysis rates inside clouds can be large but outside clouds, and especially at the ground, differences are small. To take into account the impact of aerosols on photolysis rates, Polair3D and Fast-JX are coupled. Photolysis rates are updated every hour. Large impact on photolysis rates is observed at the ground, decreasing with altitude. The aerosol specie that impact the most photolysis rates is dust especially in south Europe. Strong impact is also observed over anthropogenic emission regions (Paris, The Po and the Ruhr Valley) where mainly nitrate and sulphate reduce the incoming radiation. Differences in photolysis rates lead to changes in gas concentrations, with the largest impact simulated on OH and NO concentrations. At the ground, monthly mean concentrations of both species are reduced over Europe by around 10 to 14% and their tropospheric burden by around 10%. The decrease in OH leads to an increase of the life-time of several species such as VOC. NO2 concentrations are not strongly impacted and O3 concentrations are mostly reduced at the ground (−3%). O3 peaks are systematically decreased because of the NO2 photolysis rate coefficient decrease. Not only gas are impacted but also secondary aerosols, due to changes in gas precursors concentrations. However changes in aerosol species concentrations often compensate each other resulting in a low impact on PM10 and PM2.5 concentrations (lower than 2%). The changes in gas concentrations at the ground induced by the modification of photolysis rates (by aerosols and clouds) are compared to changes induced by 29 different model parametrisations in Roustan et al. (2010). Among the 31 model parametrisations, "including aerosols on photolysis rates calculation" has the strongest impact on OH concentrations and on O3 bias in July. In terms of air quality, ground concentrations (NO2, O3, PM10) are compared with measurements. Changes arising from cloud parametrisation are small. Simulation performances are often slightly better when including aerosol in photolysis rates calculation. The systematic O3 peak reduction leads to large differences in the exceedances of the European O3 standard as calculated by the model, in better agreement with measurements. The number of exceedances of the information and the alert threshold is divided by 2 when the aerosol impact on photochemistry is simulated. This shows the importance of taking into account aerosols impact on photolysis rates in air quality studies.

Sign in / Sign up

Export Citation Format

Share Document