scholarly journals Effect of Solid Forms on Physicochemical Properties of Valnemulin

Crystals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 675 ◽  
Author(s):  
Jinbo Ouyang ◽  
Jian Chen ◽  
Limin Zhou ◽  
Fangze Han ◽  
Xin Huang
Keyword(s):  
Organic Acids ◽  
Physicochemical Properties ◽  
Excess Enthalpy ◽  
Vapor Sorption ◽  
Dynamic Vapor Sorption ◽  
Scanning Calorimetry ◽  
Intrinsic Dissolution ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

To improve the physicochemical properties of valnemulin (VLM), different solid forms formed by VLM and organic acids, including tartaric acid (TAR), fumaric acid (FUM), and oxalic acid (OXA), were successfully prepared and characterized by using differential scanning calorimetry (DSC), scanning electron microscope (SEM), X-ray powder diffraction (XRPD), and Fourier-transform infrared spectroscopy (FT-IR). The excess enthalpy Hex between VLM and other organic acids was calculated by COSMOthermX software and was used to evaluate the probability of forming multi-component solids between VLM and organic acids. By thermal analysis, it was confirmed that multi-component solid forms of VLM were thermodynamically more stable than VLM itself. Through dynamic vapor sorption (DVS) experiments, it was found that three multi-component solid forms of VLM had lower hygroscopicity than VLM itself. Furthermore, the intrinsic dissolution rate of VLM and its multi-component forms was determined in one kind of acidic aqueous medium by using UV-vis spectrometry. It was found that the three multi-component solid forms of VLM dissolved faster than VLM itself.

scholarly journals Preparation and Properties of Ginger Essential Oil β-Cyclodextrin/Chitosan Inclusion Complexes

Coatings ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 305 ◽  
Author(s):  
Yan Zhang ◽  
Hui Zhang ◽  
Fang Wang ◽  
Li-Xia Wang
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Spray Drying ◽  
Small Particle Size ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir ◽  
Thermal Stability Of ◽  
Scanning Electron

The ginger essential oil/β-cyclodextrin (GEO/β-CD) composite, ginger essential oil/β-cyclodextrin/chitosan (GEO/β-CD/CTS) particles and ginger essential oil/β-cyclodextrin/chitosan (GEO/β-CD/CTS) microsphere were prepared with the methods of inclusion, ionic gelation and spray drying. Their properties were studied by using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermo-gravimetry analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The results showed that the particle size of GEO/β-CD composite was smaller than that of β-CD and GEO/β-CD/CTS particles were loose and porous, while the microsphere obtained by spray drying had certain cohesiveness and small particle size. Besides, results also indicated that β-CD/CTS could modify properties and improve the thermal stability of GEO, which would improve its application value in food and medical industries.

Structures and physicochemical properties of vortioxetine salts

2016 ◽  
Vol 72 (5) ◽  
pp. 723-732 ◽  
Author(s):  
Xinbo Zhou ◽  
Xiurong Hu ◽  
Suxiang Wu ◽  
Jiali Ye ◽  
Mengying Sun ◽  
...  
Keyword(s):  
Antidepressant Drug ◽  
Drug Candidate ◽  
X Ray Diffraction ◽  
High Solubility ◽  
Scanning Calorimetry ◽  
Intrinsic Dissolution ◽  
X Ray ◽  
Acidic Proton ◽  
Water Ph ◽  
Ft Ir

In the present work, novel salts of the multimodal antidepressant drug vortioxetine (VT) were crystallized with pharmaceutically acceptable acids, aiming to improve the solubility of VT. The acids for VT were selected based on ΔpKabeing greater than 2 or 3. Salts of hydrobromic acid (HBr), hydrochloric acid (HCl),p-hydroxybenzoic acid (PHBA), saccharin (SAC) and L-aspartic acid (ASP) were reported. All salts were characterized by single-crystal X-ray diffraction, FT–IR, powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC). The acidic proton is transferred to the secondary N atom on the piperazine ring of VT, forming the charge-assisted hydrogen bond N+—H...X−(X= Cl, Br, O). Solubility and intrinsic dissolution rate (IDR) experiments were carried out in distilled water (pH = 7.0) to compare the solubilities of the salts with that of VT. The VT–ASP–H2O (1:1:2) salt showed 414 times higher solubility and 1722 times faster IDR compared with VT. VT–ASP–H2O (1:1:2) is a high solubility salt that is stable in a slurry experiment at 298 K in 95% ethanol. The experimental data for the VT–ASP–H2O (1:1:2) salt identify it as a promising drug candidate.

Synthesis, Characterization and Magnetism of Nanosized Copper Ferrite

2008 ◽  
Vol 368-372 ◽  
pp. 604-606 ◽  
Author(s):  
Wei Zhong Lv ◽  
Zhong Kuang Luo ◽  
Bo Liu ◽  
Xiang Zhong Ren ◽  
Hong Hua Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Copper Ferrite ◽  
Sonochemical Method ◽  
Thermal Gravimetric ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

Copper ferrite powders were successfully synthesized by sonochemical method. The resultant powders were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, differential thermal analysis-thermal gravimetric (DTA-TG), differential scanning calorimetry (DSC) and VSM. The particle saturation magnetization (Ms) is 66 emu/g and an intrinsic coercive force (iHc) is 2100 Oe when the precursor calcined at 950 °C for 15 h.

Triamterene–furosemide salt: structural aspects and physicochemical evaluation

2018 ◽  
Vol 74 (6) ◽  
pp. 738-741 ◽  
Author(s):  
Bo Peng ◽  
Jian-Rong Wang ◽  
Xuefeng Mei
Keyword(s):  
Alternative Formulation ◽  
Valuable Insight ◽  
Dynamic Vapor Sorption ◽  
Scanning Calorimetry ◽  
Intrinsic Dissolution ◽  
X Ray ◽  
Poor Solubility ◽  
Physicochemical Evaluation ◽  
Potential Alternative ◽  
Novel Drug

Furosemide (Fur) is a BCS class IV diuretic drug with low bioavailability due to its poor solubility and poor membrane permeability. Triamterene (Tri) is a potassium-sparing diuretic with low bioavailability due to its poor solubility. Here, a novel drug–drug salt composed of Tri and Fur was successfully synthesized. Tri–Fur was comprehensively characterized with single-crystal X-ray and powder X-ray diffraction techniques, thermogravimetric analysis, differential scanning calorimetry and dynamic vapor sorption. The apparent equilibrium solubility (in pH 2.0 buffer) of Tri–Fur is improved compared with Fur and a physical mixture of Tri with equimolar Fur by 15.3-fold and 12.2-fold enhancements, respectively. Its intrinsic dissolution rate (in pH 2.0 buffer) is also higher than for a Fur component with an enhancement of 9.5-fold. This study provides a valuable insight into the formation of dual pharmaceutical salts and demonstrates that Tri–Fur can be a potential alternative formulation.

Preparation of Nanosized Barium Ferrite Spinel by a Sonochemical Method

2008 ◽  
Vol 368-372 ◽  
pp. 607-609
Author(s):  
Bo Liu ◽  
Wei Zhong Lv ◽  
Zhong Kuang Luo ◽  
Xiang Zhong Ren ◽  
Hong Hua Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Barium Ferrite ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ultrasound Radiation ◽  
Ft Ir ◽  
Scanning Electron ◽  
Ferrite Spinel

Nanosized barium ferrite spinel particles were prepared with the aid of ultrasound radiation by a precursor approach. A precursor was got by sonicating an aqueous solution of BaCl2, Fe (NO3)3·9H2O and urea firstly. Nanosized BaFe2O4 particles with a size of ca.40nm were prepared after the precursor was heated at 950 °C for 15 h. The nanosized barium ferrite particles and the precursor were characterized by powder X-ray diffraction, scanning electron microscopy, FT-IR and differential scanning calorimetry.

Thermal Behaviour of Candesartan Active substance and in pharmaceutical compounds

2017 ◽  
Vol 68 (8) ◽  
pp. 1895-1902
Author(s):  
Ioana Cristina Tita ◽  
Eleonora Marian ◽  
Bogdan Tita ◽  
Claudia Crina Toma ◽  
Laura Vicas
Keyword(s):  
Thermal Behaviour ◽  
Active Substance ◽  
Pharmaceutical Research ◽  
Pharmaceutical Product ◽  
Nitrogen Atmosphere ◽  
Pure Substance ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir

Thermal analysis is one of the most frequently used instrumental techniques in the pharmaceutical research, for the thermal characterization of different materials from solids to semi-solids, which are of pharmaceutical relevance. In this paper, simultaneous thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) were used for characterization of the thermal behaviour of candesartan cilexetil � active substance (C-AS) under dynamic nitrogen atmosphere and nonisothermal conditions, in comparison with pharmaceutical product containing the corresponding active substance. It was observed that the commercial samples showed a different thermal profile than the standard sample, caused by the presence of excipients in the pharmaceutical product and to possible interaction of these with the active substance. The Fourier transformed infrared spectroscopy (FT-IR) and X-ray powder diffraction (XRPD) were used as complementary techniques adequately implement and assist in interpretation of the thermal results. The main conclusion of this comparative study was that the TG/DTG and DSC curves, together with the FT-IR spectra, respectively X-ray difractograms constitute believe data for the discrimination between the pure substance and pharmaceutical forms.

scholarly journals Extraction of Boron from Ludwigite Ore: Mechanism of Soda-Ash Roasting of Lizardite and Szaibelyite

Minerals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 533 ◽  
Author(s):  
Xin Zhang ◽  
Guanghui Li ◽  
Jinxiang You ◽  
Jian Wang ◽  
Jun Luo ◽  
...  
Keyword(s):  
Sodium Carbonate ◽  
Energy Dispersive Spectrometer ◽  
Low Grade ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Selective Activation ◽  
X Ray ◽  
Shed Light ◽  
Soda Ash ◽  
Scanning Electron

Ludwigite ore is a typical low-grade boron ore accounting for 58.5% boron resource of China, which is mainly composed of magnetite, lizardite and szaibelyite. During soda-ash roasting of ludwigite ore, the presence of lizardite hinders the selective activation of boron. In this work, lizardite and szaibelyite were prepared and their soda-ash roasting behaviors were investigated using thermogravimetric-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), and scanning electron microscope and energy dispersive spectrometer (SEM-EDS) analyses, in order to shed light on the soda-ash activation of boron within ludwigite ore. Thermodynamics of Na2CO3-MgSiO3-Mg2SiO4-Mg2B2O5 via FactSage show that the formation of Na2MgSiO4 was preferential for the reaction between Na2CO3 and MgSiO3/Mg2SiO4. While, regarding the reaction between Na2CO3 and Mg2B2O5, the formation of NaBO2 was foremost. Raising temperature was beneficial for the soda-ash roasting of lizardite and szaibelyite. At a temperature lower than the melting of sodium carbonate (851 °C), the soda-ash roasting of szaibelyite was faster than that of lizardite. Moreover, the melting of sodium carbonate accelerated the reaction between lizardite with sodium carbonate.

Liquid crystalline polyureas with oligo(ethylene glycol) sequences

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Shahram Mehdipour-Ataei ◽  
Leila Akbarian-Feizi
Keyword(s):  
Liquid Crystalline ◽  
Spectroscopic Method ◽  
Polymerization Reaction ◽  
X Ray Diffraction ◽  
Subsequent Reaction ◽  
Scanning Calorimetry ◽  
Polar Solvents ◽  
X Ray ◽  
H Nmr ◽  
Ft Ir

AbstractA diamine monomer containing ester, amide and ether functional groups was prepared and its polymerization reaction with different diisocyanates to give main chain poly(ester amide ether urea)s was investigated. The monomer was synthesized via reaction of terephthaloyl chloride with 4-hydroxybenzoic acid and subsequent reaction of the resulted diacid with 1,8-diamino-3,6-dioxaoctane. The polymers were characterized by FT-IR and 1H-NMR spectroscopic method and elemental analysis. The resulting polymers exhibited excellent solubility in polar solvents. Crystallinity of the resulted polymers was evaluated by wide-angle X-ray diffraction (WXRD) method, and they exhibited semi-crystalline patterns. The glass transition temperatures (Tg) of the polymers determined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) were in the range of 88-112 °C. The temperatures for 10% weight loss (T10) from their thermogravimetric analysis (TGA) curves were found to be in the range of 297-312 °C in air. Also the prepared polyureas showed liquid crystalline character.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

Sign in / Sign up

Export Citation Format

Share Document