scholarly journals Potential Usage of Hybrid Polymers Binders Based on Fly Ash with the Addition of PVA with Satisfying Mechanical and Radiological Properties

Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 270
Author(s):  
Miljana Mirković ◽  
Ljiljana Kljajević ◽  
Sabina Dolenec ◽  
Miloš Nenadović ◽  
Vladimir Pavlović ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fourier Transform ◽  
Fly Ash ◽  
Thermal Power ◽  
Morphological Characteristics ◽  
Environmental Safety ◽  
Main Concept ◽  
X Ray ◽  
Nikola Tesla ◽  
Radiological Properties

Since recycled technologies usage is mandatory for environmental safety, and in this regard, it is important to examine new materials that can be used in construction and are primarily produced from fly ash. In addition to characteristics such as hardness and compressive strength, the given materials must also be radiologically and environmentally safe. The main concept of engineered geopolymer gel composites based on fly ash residues is focused on developing binder materials via gel formation processes that can replace ordinary cement materials. This study is unique in researching the potential use of fly ash from the Nikola Tesla thermal power plant in Serbia, where the hybrid geopolymeric materials synthesized from fly ash are experimentally examined with the addition 1 wt% and 2 wt% of polyvinyl alcohol (PVA). This paper aims to investigate the structural, morphological, mechanical, and radiological properties of hybrid materials with the addition of PVA and without additive in the period of ageing for 28 days at room temperature. The phase composition was investigated using X-ray powder diffraction (XRPD) analysis, while morphological characteristics of these materials were examined using scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDS). Vibrational spectra of obtained samples are investigated using diffuse reflectance infrared Fourier transform (DRIFT) and Fourier transform infrared (FTIR) techniques. The hardness and compressive strength are also examined, indicating that the 1 wt% addition in geopolymeric matrix results in the best mechanical properties. Radiological measurements of investigated all geopolymer samples show decreasing activity concentrations of radionuclides for 50% compared to fly ash.

scholarly journals Mineralogical, Microstructural and Compressive Strength Characterization of Fly Ash as Materials in Geopolymer Cement

Elkawnie ◽  
2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Cut Rahmawati ◽  
Sri Aprilia ◽  
Taufiq Saidi ◽  
Teuku Budi Aulia
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Compressive Strength ◽  
Fourier Transform ◽  
Fly Ash ◽  
X Ray Diffraction ◽  
Bending Vibration ◽  
X Ray ◽  
Geopolymer Cement ◽  
Scanning Electron

Abstract: This study was designed to examine the mineral, microstructural, and mechanical strength properties of fly ash and its feasibility as a raw material for geopolymer cement. The study used an experimental method by examining the characteristics of fly ash by X-ray Fluorescence Spectrometer (XRF), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), hydrometer method, Scanning electron microscopy (SEM), and compressive strength testing. For creating the geopolymer cement paste, a concentration of NaOH 10M was used, with a ratio of water/solid = 0.4 and a ratio of Na2SiO3/NaOH = 1 using curring at room temperature. The results showed the geopolymer pastes have a compressive strength of 18.1 MPa and 21.5 MPa after 7 days and 28 days. The XRD results showed a decrease in the peak of 2θ at 26.54° because the amorphous part had transformed into a C-S-H solution in geopolymer cement. This finding was supported by the FTIR spectra results showing Si-O-Si bending vibration and the functional group of AlO2. It showed that Nagan Raya fly ash-based geopolymer is a potential construction material.Abstrak: Penelitian ini dirancang untuk mendapatkan sifat mineral, mikrostruktural, dan kekuatan mekanis dari fly ash serta kesesuaiannya sebagai material dasar pada semen geopolimer. Metode penelitian yang digunakan adalah metode eksperimen dengan cara  menguji karakteristik dari fly ash dengan pengujian X-ray Fluorescense Spectrometer (XRF), Fourier transform infrared (FTIR) spectoscopy, X-ray diffraction (XRD), hydrometer method, Scanning electron microscopy (SEM) dan kuat tekan.  Untuk pembuatan pasta semen geopolimer digunakan konsentrasi NaOH 10 M, rasio water/solid 0,4 dan rasio Na2SiO3/NaOH = 1 dengan perawatan pada suhu kamar. Hasil menunjukkan setelah 7 hari pasta geopolimer memiliki kuat tekan 18,1 MPa dan 21,5 MPa pada 28 hari. Hasil XRD menunjukkan adanya penurunan puncak 2θ pada 26,54° ini disebabkan karena bagian amorf dari fly ash telah menjadi larutan C-S-H pada semen geopolimer. Hasil ini diperkuat dengan analisis FTIR spectra yang menunjukkan adanya Si-O-Si bending vibration dan gugus fungsi dari AlO2. Hasil menunjukkan fly ash dari Nagan Raya potensial sebagai bahan material konstruksi berbasis geopolimer.

Properties of Geopolymer Paste from Fly Ash Blended with Metakaolin as Pervious Concrete

2016 ◽  
Vol 690 ◽  
pp. 179-186 ◽  
Author(s):  
Phachongkit Boonanunwong ◽  
Pimpawee Keawpapasson ◽  
Chayanee Tippayasam ◽  
Parjaree Thavorniti ◽  
Prinya Chindaprasirt ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fourier Transform ◽  
Fly Ash ◽  
Coarse Aggregate ◽  
Chemical Compositions ◽  
Geopolymer Concrete ◽  
X Ray Diffraction ◽  
X Ray ◽  
Lignite Fly Ash ◽  
Scanning Electron

The purpose of this research was to study pervious geopolymer concrete with different amounts of lignite fly ash (F), metakaolin (M), sodium silicate (NS) and 8 mol/L sodium hydroxide (NH) solution. Constant NS/NH ratio of 0.5, three alkali liquid/pozzolan (L/P) ratios viz., 0.5, 0.6 and 0.7 and pozzolan to coarse aggregate ratio of 1:8 were used. The compressive strengths of 50×50×50 mm3 cube specimens were tested at the age of 28 days. In addition, compressive strengths of 100 mm in diameter and 200 mm in height cylindrical specimens were tested at the age of 7, 14, 21 and 28 days. The chemical compositions and microstructures of specimens were characterized by X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM), respectively.The mixture with 50%F+50%M and L/P ratio of 0.7 was the best proportion for pervious geopolymer concrete according to the compressive strength, good permeability and microstructural images. The bond of Si-O-Al and Si-O-Si characterized by Fourier Transform Infrared Spectroscopy (FTIR) spectra confirmed the developed geopolymeric structure.

scholarly journals Preparation of Synthetic Zeolites from Coal Fly Ash by Hydrothermal Synthesis

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1267
Author(s):  
David Längauer ◽  
Vladimír Čablík ◽  
Slavomír Hredzák ◽  
Anton Zubrik ◽  
Marek Matik ◽  
...  
Keyword(s):  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Product Analysis ◽  
Coal Combustion Products ◽  
X Ray ◽  
Wide Range ◽  
Silica Alumina

Large amounts of coal combustion products (as solid products of thermal power plants) with different chemical and physical properties cause serious environmental problems. Even though coal fly ash is a coal combustion product, it has a wide range of applications (e.g., in construction, metallurgy, chemical production, reclamation etc.). One of its potential uses is in zeolitization to obtain a higher added value of the product. The aim of this paper is to produce a material with sufficient textural properties used, for example, for environmental purposes (an adsorbent) and/or storage material. In practice, the coal fly ash (No. 1 and No. 2) from Czech power plants was firstly characterized in detail (X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), particle size measurement, and textural analysis), and then it was hydrothermally treated to synthetize zeolites. Different concentrations of NaOH, LiCl, Al2O3, and aqueous glass; different temperature effects (90–120 °C); and different process lengths (6–48 h) were studied. Furthermore, most of the experiments were supplemented with a crystallization phase that was run for 16 h at 50 °C. After qualitative product analysis (SEM-EDX, XRD, and textural analytics), quantitative XRD evaluation with an internal standard was used for zeolitization process evaluation. Sodalite (SOD), phillipsite (PHI), chabazite (CHA), faujasite-Na (FAU-Na), and faujasite-Ca (FAU-Ca) were obtained as the zeolite phases. The content of these zeolite phases ranged from 2.09 to 43.79%. The best conditions for the zeolite phase formation were as follows: 4 M NaOH, 4 mL 10% LiCl, liquid/solid ratio of 30:1, silica/alumina ratio change from 2:1 to 1:1, temperature of 120 °C, process time of 24 h, and a crystallization phase for 16 h at 50 °C.

The Latest Research in Mongolia on the Utilization of Coal Combustion By-Products

2021 ◽  
Vol 323 ◽  
pp. 8-13
Author(s):  
Jadambaa Temuujin ◽  
Damdinsuren Munkhtuvshin ◽  
Claus H. Ruescher
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Power Stations ◽  
Thermal Power Stations ◽  
Coal Ashes ◽  
By Products

With a geological reserve of over 170 billion tons, coal is the most abundant energy source in Mongolia with six operating thermal power stations. Moreover, in Ulaanbaatar city over 210000 families live in the Ger district and use over 800000 tons of coal as a fuel. The three thermal power plants in Ulaanbaatar burn about 5 million tons of coal, resulting in more than 500000 tons of coal combustion by-products per year. Globally, the ashes produced by thermal power plants, boilers, and single ovens pose serious environmental problems. The utilization of various types of waste is one of the factors determining the sustainability of cities. Therefore, the processing of wastes for re-use or disposal is a critical topic in waste management and materials research. According to research, the Mongolian capital city's air and soil quality has reached a disastrous level. The main reasons for air pollution in Ulaanbaatar are reported as being coal-fired stoves of the Ger residential district, thermal power stations, small and medium-sized low-pressure furnaces, and motor vehicles. Previously, coal ashes have been used to prepare advanced materials such as glass-ceramics with the hardness of 6.35 GPa, geopolymer concrete with compressive strength of over 30 MPa and zeolite A with a Cr (III) removal capacity of 35.8 mg/g. Here we discuss our latest results on the utilization of fly ash for preparation of a cement stabilized base layer for paved roads, mechanically activated fly ash for use in concrete production, and coal ash from the Ger district for preparation of an adsorbent. An addition of 20% fly ash to 5-8% cement made from a mixture of road base gave a compressive strength of ~ 4MPa, which exceeds the standard. Using coal ashes from Ger district prepared a new type of adsorbent material capable of removing various organic pollutants from tannery water was developed. This ash also showed weak leaching characteristics in water and acidic environment, which opens up an excellent opportunity to utilize.

scholarly journals PENGARUH WAKTU CURING TERHADAP KUAT TEKAN GEOPOLIMER BERBASIS FLY ASH

2019 ◽  
Vol 2 (1) ◽  
pp. 50
Author(s):  
Andrie Harmaji ◽  
Claudia Claudia ◽  
Lia Asri ◽  
Bambang Sunendar ◽  
Ahmad Nuruddin
Keyword(s):  
Compressive Strength ◽  
Fourier Transform ◽  
Fly Ash ◽  
Power Plant ◽  
Functional Groups ◽  
Room Temperature ◽  
Three Dimensional ◽  
Fine Aggregate ◽  
Alkali Activator ◽  
Infra Red

Abstract:. Suralaya power plant produces fly ash about 219.000 ton per year. Fly ash contents of silica and alumina as major components that can be used as precursors for geopolymer, a three dimensional networks aluminosilicate polymers. This research aim is to utilize fly ash for geopolymer made by mixing fly ash, fine aggregate, and alkali activator in a cubic mould and curing was carried out at room temperature for 7 and 28 days. After 28 days of curing the compressive strength of geopolymer reached 41.70 MPa. XRD characterization shows Albite (NaAlSi3O8) formation which has similarity to geopolymer compound. Fourier Transform Infra Red spectra show siloxo and sialate bond. These are typical functional groups that are found in geopolymer materials.Keyword: geopolymer, fly ash, aluminosilicate, alkali activator, albite, siloxo, sialateAbstrak: Pembangkit Listrik Tenaga Uap (PLTU) Suralaya menghasilkan fly ash (abu terbang) sekitar 219.000 ton per tahun. Fly ash memiliki silika dan alumina sebagai komponen utama yang dapat digunakan sebagai prekursor untuk geopolimer, suatu material polimer aluminosilikat tiga dimensi. Penelitian ini bertujuan untuk memanfaatkan fly ash untuk geopolimer yang dibuat dengan mencampur fly ash, agregat halus, dan aktivator alkali dalam cetakan kubik dan pengawetan dilakukan pada suhu kamar selama 7 dan 28 hari. Setelah 28 hari curing kekuatan tekan geopolimer mencapai 41,70 MPa. Karakterisasi XRD menunjukkan pembentukan Albite (NaAlSi3O8) yang memiliki kemiripan dengan senyawa geopolimer. Hasil spektroskopi Fourier Transform Infra Red (FTIR) menunjukkan ikatan siloxo dan sialate yang merupakan gugus fungsional khas yang ditemukan dalam geopolimer.Kata Kunci: geopolimer, abu terbang, aluminosilikat, alkali aktivator, albite, siloxo, sialate

RESEARCH OF COMPLEX MODIFICATION OF HEAVY CONCRETE

2021 ◽  
Vol 96 (4) ◽  
pp. 107-112
Author(s):  
YU.S. FILIMONOVA ◽  
◽  
E.G. VELICHKO ◽  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Complex Chemical ◽  
Composition And Structure ◽  
Combined Use ◽  
Mineral Additive

Modification of the composition and structure of heavy concrete with the use of a complex chemical-mineral additive consisting of fly ash from thermal power plants, a superplasticizer, a high-valence hardening accelerator AC and a fine-dispersed clinker component is considered. Modified concrete is characterized by an increase in compressive strength at a brand age by 67%, a decrease in the water content of a concrete mixture by 13.6% and an improvement in its workability by 11-12 cm. With the combined use of a superplasticizer and a high-valence hardening accelerator AC a significant synergistic effect is observed in the format of enhancing their plasticizing effect. The high efficiency of the application of the mixed-dispersed clinker component has been established.

UTILIZATION OF FLY ASH AND CONCRETE RESIDUE IN THE PRODUCTION OF GEOPOLYMER BRICKS

2017 ◽  
Vol 12 (1) ◽  
pp. 63-77 ◽  
Author(s):  
Siriporn Sirikingkaew ◽  
Nuta Supakata
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Compressive Strength ◽  
Phase Composition ◽  
Fly Ash ◽  
Industrial Waste ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

This study presents the development of geopolymer bricks synthetized from industrial waste, including fly ash mixed with concrete residue containing aluminosilicate compound. The above two ingredients are mixed according to five ratios: 100:0, 95:5, 90:10, 85:15, and 80:20. The mixture's physico-mechanical properties, in terms of water absorption and the compressive strength of the geopolymer bricks, are investigated according to the TIS 168-2546 standard. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses are used to investigate the microstructure and the elemental and phase composition of the brick specimens. The results indicate that the combination of fly ash and concrete residue represents a suitable approach to brick production, as required by the TIS 168–2546 standard.

scholarly journals The Effect of Fly Ash Microspheres on the Pore Structure of Concrete

Minerals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 58 ◽  
Author(s):  
Elzbieta Haustein ◽  
Aleksandra Kuryłowicz-Cudowska
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Total Content ◽  
Spherical Particles ◽  
Hardened Concrete ◽  
Image Analysis System ◽  
Micro Computed Tomography ◽  
Concrete Technology ◽  
Air Voids ◽  
X Ray

The fly ash microspheres (FAMs) formed during the mineral transformation stage in coal combustion are hollow spherical particles with a density less than water. This paper presents the results of X-ray micro-computed tomography and an automatic image analysis system of the porosity in the structure of hardened concrete with microspheres. Concrete mixtures with ordinary Portland cement and two substitution rates of cement by microspheres—5% and 10%—are investigated. For all considered mixes, a constant water/binder ratio (w/b) equal to 0.50 was used. The distribution of the air voids and the compressive strength of the concrete were tested after 28 days. With the increasing mass of cement replacement by FAMs, the compressive strength decreases after 28 days. The total volume of the air voids in hardened concrete with fly ash microspheres tested by X-ray varies from 5.1% to 7.4%. The closed pores constitute more than 80% of the total content of air pores. The study proves that the use of microspheres grains with specific dimensions has a significant impact on concrete porosity. Their application in concrete technology can be an alternative aeration solution for fresh concrete mixes and an effective method for utilization.

Effect of Curing Time and Sintering to the Properties of Geopolymer Mortars

2017 ◽  
Vol 888 ◽  
pp. 184-187
Author(s):  
Salwa Ismail ◽  
Mohammad Faizal Mohd Razali ◽  
Izwan Johari ◽  
Zainal Arifin Ahmad ◽  
Shah Rizal Kasim
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Distilled Water ◽  
Curing Time ◽  
Pore Former ◽  
X Ray ◽  
Before And After ◽  
Naoh Solution ◽  
Added Water ◽  
Alkaline Activator

In this study, the geopolymer mortars were synthesized with fly ash (FA) and silica powder as aluminosilicate sources and a combination of sodium hydroxide (NaOH) solution, sodium silicate (Na2SiO3) solution and distilled water as alkaline activator. Commercial sago was used as a pore former in the mortars. The percentage of sago used were 10, 20 and 30 wt% of FA. The amount of added water used in each mixture was 5% by weight of FA, NaOH solution and Na2SiO3 solution. The formed geopolymer mortars were cured for 1, 3 and 7 days and sintered at 1000 °C. X-ray fluoresence (XRF) shown that FA contains higher amount of silica (SiO2) and alumina (Al2O3) which is important as aluminosilicate sources. The properties of the geopolymer mortars before and after sintered at 1000 °C have been investigated. The results show that geopolymer mortars with 10% of sago content with curing time of 7 days and sintered at 1000 °C give the highest compressive strength of 13.5 MPa.

scholarly journals Phytoremediation Potential, Photosynthetic and Antioxidant Response to Arsenic-Induced Stress of Dactylis glomerata L. Sown on Fly Ash Deposits

Plants ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 657
Author(s):  
Gordana Gajić ◽  
Lola Djurdjević ◽  
Olga Kostić ◽  
Snežana Jarić ◽  
Branka Stevanović ◽  
...  
Keyword(s):  
Fly Ash ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Redox Homeostasis ◽  
Dactylis Glomerata ◽  
Field Research ◽  
Real Field ◽  
Nikola Tesla ◽  
Psii Photochemistry ◽  
As Stress

Arsenic (As) from coal fly ash can be released into soil/groundwater, presenting a global threat to the environment and human health. To overcome this environmental problem, phytoremediation represents an urgent need, providing ‘green’ cleanup of contaminated lands. The present study focused on As concentrations in fly ash and plants, evaluation of phytoremediation potential of Dactylis glomerata sown on fly ash deposits together with its photosynthetic activity, and oxidative and antioxidative response to As stress. Field research was carried out on fly ash deposits at the thermal power plant “Nikola Tesla”, Obrenovac (TENT-A, Serbia) and the control site. Fly ash is characterized by alkaline pH reactions, small amounts of organic matter, a large amount of available phosphate, and total and available As concentrations. Results in this study indicate that phosphate application can ameliorate As toxicity, uptake and root-shoot transport. Furthermore, D. glomerata can be considered as good As phytostabilizator, because it retains more As in roots than in leaves. Excess As in leaves decreases photosynthetic efficiency (Fv/Fm) and concentrations of chlorophylls, carotenoids, and anthocyanins, whereas high content of malondialdehyde (MDA) can be a signal for biosynthesis phenolics and ascorbic acid, providing cellular redox homeostasis and recovery of photosystem II (PSII) photochemistry. In the roots, low oxidative stress under high concentrations of As is related to intense antioxidant biosynthesis. Taken together, the results in this study indicate a high adaptive potential of D. glomerata to As stress. These findings may suggest that physiological and metabolic tools can be used as a way forward in the ‘real field’ scenario, phytomanagement of fly ash and ecosystem services providing sustainable phytoremediation of As-contaminated sites around the globe.

Sign in / Sign up

Export Citation Format

Share Document