scholarly journals Advances in Lipid Extraction Methods—A Review

2021 ◽  
Vol 22 (24) ◽  
pp. 13643
Author(s):  
Ramesh Kumar Saini ◽  
Parchuri Prasad ◽  
Xiaomin Shang ◽  
Young-Soo Keum
Keyword(s):  
Lipid Analysis ◽  
Neutral Lipids ◽  
Lipid Extraction ◽  
Critical Factor ◽  
Biological Tissues ◽  
Extraction Methods ◽  
Single Step ◽  
Green Solvents ◽  
Advantages And Disadvantages ◽  
Environmentally Safe

Extraction of lipids from biological tissues is a crucial step in lipid analysis. The selection of appropriate solvent is the most critical factor in the efficient extraction of lipids. A mixture of polar (to disrupt the protein-lipid complexes) and nonpolar (to dissolve the neutral lipids) solvents are precisely selected to extract lipids efficiently. In addition, the disintegration of complex and rigid cell-wall of plants, fungi, and microalgal cells by various mechanical, chemical, and enzymatic treatments facilitate the solvent penetration and extraction of lipids. This review discusses the chloroform/methanol-based classical lipid extraction methods and modern modifications of these methods in terms of using healthy and environmentally safe solvents and rapid single-step extraction. At the same time, some adaptations were made to recover the specific lipids. In addition, the high throughput lipid extraction methodologies used for liquid chromatography-mass spectrometry (LC-MS)-based plant and animal lipidomics were discussed. The advantages and disadvantages of various pretreatments and extraction methods were also illustrated. Moreover, the emerging green solvents-based lipid extraction method, including supercritical CO2 extraction (SCE), is also discussed.

scholarly journals Comparison of different lipid extraction methods for different tissue types of Arabidopsis thaliana

2020 ◽  
Author(s):  
Cheka Kehelpannala ◽  
Thusitha Wasantha Thilaka Rupasinghe ◽  
Thomas Hennessy ◽  
David Bradley ◽  
Berit Ebert ◽  
...  
Keyword(s):  
Arabidopsis Thaliana ◽  
Stress Responses ◽  
Lipid Analysis ◽  
Lipid Extraction ◽  
Extraction Methods ◽  
Single Step ◽  
Lipid Classes ◽  
Model Plant Arabidopsis Thaliana ◽  
Extraction Period ◽  
Different Tissues

Abstract Background: The plant lipidome is highly complex, and the composition of lipids in different tissues as well as their specific functions in plant development, growth and stress responses have yet to be fully elucidated. To do this, efficient lipid extraction protocols which deliver target compounds in solution at concentrations adequate for subsequent detection, quantitation and analysis through spectroscopic methods are required. To date, numerous methods are used to extract lipids from plant tissues. However, a comprehensive analysis of the efficiency and reproducibility of these methods to extract multiple lipid classes from diverse tissues of a plant has not been undertaken. Results: In this study, we report the comparison of four different lipid extraction procedures in order to determine the most effective lipid extraction protocol to extract lipids from different tissues of the model plant Arabidopsis thaliana . Conclusion: While particular methods were best suited to extract different lipid classes from diverse Arabidopsis tissues, overall a single-step extraction method with a 24 h extraction period, which uses a mixture of chloroform, isopropanol, methanol and water, was the most efficient, reproducible and the least labor-intensive to extract a broad range of lipids for untargeted lipidomic analysis of Arabidopsis tissues. This method extracted a broad range of lipids from leaves, stems, siliques, roots, seeds, seedlings and flowers of Arabidopsis. In addition, appropriate methods for targeted lipid analysis of specific lipids from particular Arabidopsis tissues were also identified.

scholarly journals A comparison of different lipid extraction methods for different tissue types of Arabidopsis thaliana

2020 ◽  
Author(s):  
Cheka Kehelpannala ◽  
Thusitha Wasantha Thilaka Rupasinghe ◽  
Thomas Hennessy ◽  
David Bradley ◽  
Berit Ebert ◽  
...  
Keyword(s):  
Arabidopsis Thaliana ◽  
Stress Responses ◽  
Lipid Analysis ◽  
Lipid Extraction ◽  
Extraction Methods ◽  
Single Step ◽  
Lipid Classes ◽  
Specific Lipids ◽  
Extraction Period ◽  
Different Tissues

Abstract Background: The plant lipidome is highly complex, and the composition of lipids in different tissues as well as their specific functions in plant development, growth and stress responses have yet to be fully elucidated. To do this, efficient lipid extraction protocols which deliver target compounds in solution at concentrations adequate for subsequent detection, quantitation and analysis through spectroscopic methods are required. To date, numerous methods are used to extract lipids from plant tissues. However, a comprehensive analysis of the efficiency and reproducibility of these methods to extract multiple lipid classes from diverse tissues of a plant has not been undertaken. Results: In this study, we report the comparison of four different lipid extraction procedures in order to determine the most effective lipid extraction protocol to extract lipids from different tissues of the model plant Arabidopsis thaliana. Conclusion: While particular methods were best suited to extract different lipid classes from diverse Arabidopsis tissues, overall a single-step extraction method with a 24 h extraction period, which uses a mixture of chloroform, isopropanol, methanol and water, was the most efficient, reproducible and the least labor-intensive to extract a broad range of lipids for untargeted lipidomic analysis of Arabidopsis tissues. This method extracted a broad range of lipids from leaves, stems, siliques, roots, seeds, seedlings and flowers of Arabidopsis. In addition, appropriate methods for targeted lipid analysis of specific lipids from particular Arabidopsis tissues were also identified.

scholarly journals A comprehensive comparison of four methods for extracting lipids from Arabidopsis tissues

Plant Methods ◽  
2020 ◽  
Vol 16 (1) ◽  
Author(s):  
Cheka Kehelpannala ◽  
Thusitha W. T. Rupasinghe ◽  
Thomas Hennessy ◽  
David Bradley ◽  
Berit Ebert ◽  
...  
Keyword(s):  
Stress Responses ◽  
Lipid Analysis ◽  
Lipid Extraction ◽  
Single Step ◽  
Lipid Classes ◽  
Plant Tissues ◽  
Specific Lipids ◽  
Comprehensive Comparison ◽  
Extraction Period ◽  
Different Tissues

Abstract Background The plant lipidome is highly complex, and the composition of lipids in different tissues as well as their specific functions in plant development, growth and stress responses have yet to be fully elucidated. To do this, efficient lipid extraction protocols which deliver target compounds in solution at concentrations adequate for subsequent detection, quantitation and analysis through spectroscopic methods are required. To date, numerous methods are used to extract lipids from plant tissues. However, a comprehensive analysis of the efficiency and reproducibility of these methods to extract multiple lipid classes from diverse tissues of a plant has not been undertaken. Results In this study, we report the comparison of four different lipid extraction procedures in order to determine the most effective lipid extraction protocol to extract lipids from different tissues of the model plant Arabidopsis thaliana. Conclusion While particular methods were best suited to extract different lipid classes from diverse Arabidopsis tissues, overall a single-step extraction method with a 24 h extraction period, which uses a mixture of chloroform, isopropanol, methanol and water, was the most efficient, reproducible and the least labor-intensive to extract a broad range of lipids for untargeted lipidomic analysis of Arabidopsis tissues. This method extracted a broad range of lipids from leaves, stems, siliques, roots, seeds, seedlings and flowers of Arabidopsis. In addition, appropriate methods for targeted lipid analysis of specific lipids from particular Arabidopsis tissues were also identified.

scholarly journals FTIR Spectroscopy for Evaluation and Monitoring of Lipid Extraction Efficiency for Murine Liver Tissues Analysis

2021 ◽  
Vol 2 (1) ◽  
pp. 9
Author(s):  
Martina Moggio ◽  
Sonia Errico ◽  
Nadia Diano ◽  
Maria Lepore
Keyword(s):  
Ftir Spectroscopy ◽  
Extraction Efficiency ◽  
Lipid Extraction ◽  
Biological Tissues ◽  
Extraction Methods ◽  
The Past ◽  
Murine Liver ◽  
Wavenumber Region ◽  
Evaluation And Monitoring ◽  
Liver Tissues

Over the past several decades, growing research on lipids and lipidomic technologies have shown the important role played by lipids in many different situations. A powerful technique used for lipids detection and characterization in biological tissues is Fourier Transform Infrared (FTIR) spectroscopy. The main goal of the present work is to exploit FTIR spectroscopy as a tool for monitoring lipid extraction efficiency by evaluating three different lipid extraction methods in murine liver tissues. In particular, infrared spectra have been obtained in the 4000–600 cm−1 wavenumber region and the contributions of different functional groups have been evidenced. The ratio values estimated using the absorbance of selected bands related to different liver constituents have been used for a quantitative comparison of the efficiency of the different extraction methods.

A Resorcinol-Formaldehyde Resin as an Embedding Material for Electron Microscopy of Membranes

1969 ◽  
Vol 27 ◽  
pp. 328-329 ◽  
Author(s):  
J. G. Robertson ◽  
D. F. Parsons
Keyword(s):  
Electron Microscopy ◽  
Osmium Tetroxide ◽  
Neutral Lipids ◽  
Lipid Extraction ◽  
Water Soluble ◽  
Formaldehyde Resin ◽  
Electron Microscope Autoradiography ◽  
Resorcinol Formaldehyde ◽  
Major Disadvantage ◽  
Cell Organization

The extraction of lipids from tissues during fixation and embedding for electron microscopy is widely recognized as a source of possible artifact, especially at the membrane level of cell organization. Lipid extraction is also a major disadvantage in electron microscope autoradiography of radioactive lipids, as in studies of the uptake of radioactive fatty acids by intestinal slices. Retention of lipids by fixation with osmium tetroxide is generally limited to glycolipids, phospholipids and highly unsaturated neutral lipids. Saturated neutral lipids and sterols tend to be easily extracted by organic dehydrating reagents prior to embedding. Retention of the more saturated lipids in embedded tissue might be achieved by developing new cross-linking reagents, by the use of highly water soluble embedding materials or by working at very low temperatures.

scholarly journals Technologies and Extraction Methods of Polyphenolic Compounds Derived from Pomegranate (Punica granatum) Peels. A Mini Review

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 236
Author(s):  
Dimitrios Lampakis ◽  
Prodromos Skenderidis ◽  
Stefanos Leontopoulos
Keyword(s):  
Electric Fields ◽  
Bioactive Compounds ◽  
New Technologies ◽  
Ohmic Heating ◽  
Punica Granatum ◽  
Extraction Methods ◽  
Added Value ◽  
Green Solvents ◽  
Ultrasound Assisted Extraction ◽  
Functional Product

The interest in using plant by-product extracts as functional ingredients is continuously rising due to environmental and financial prospects. The development of new technologies has led to the achievement of aqueous extracts with high bioactivity that is preferable due to organic solvents nonuse. Recently, widely applied and emerging technologies, such as Simple Stirring, Pressure-Applied Extraction, Enzymatic Extraction, Ultrasound-Assisted Extraction, Pulsed Electric Fields, High Hydrostatic Pressure, Ohmic Heating, Microwave Assistant Extraction and the use of “green” solvents such as the deep eutectic solvents, have been investigated in order to contribute to the minimization of disadvantages on the extraction of bioactive compounds. This review is focused on bioactive compounds derived from pomegranate (Punica granatum) peels and highlighted the most attractive extraction methods. It is believed that these findings could be a useful tool for the pomegranate juices industry to apply an effective and economically viable extraction process, transforming a by-product to a high added value functional product.

scholarly journals Continuous-Wave THz Imaging for Biomedical Samples

2020 ◽  
Vol 11 (1) ◽  
pp. 71
Author(s):  
Yaya Zhang ◽  
Chuting Wang ◽  
Bingxin Huai ◽  
Shiyu Wang ◽  
Yating Zhang ◽  
...  
Keyword(s):  
Medical Imaging ◽  
Biomedical Imaging ◽  
Continuous Wave ◽  
Biological Tissues ◽  
Thz Spectroscopy ◽  
Label Free ◽  
Thz Imaging ◽  
Malignant Tumours ◽  
Advantages And Disadvantages ◽  
Imaging Application

In the past few decades, the applications of terahertz (THz) spectroscopy and imaging technology have seen significant developments in the fields of biology, medical diagnosis, food safety, and nondestructive testing. Label-free diagnosis of malignant tumours has been obtained and also achieved significant development in THz biomedical imaging. This review mainly presents the research status and prospects of several common continuous-wave (CW) THz medical imaging systems and applications of THz medical imaging in biological tissues. Here, we first introduce the properties of THz waves and how these properties play a role in biomedical imaging. Then, we analyse both the advantages and disadvantages of the CW THz imaging methods and the progress of these methods in THz biomedical imaging in recent ten years. Finally, we summarise the obstacles in the way of the application of THz bio-imaging application technology in clinical detection, which need to be investigated and overcome in the future.

scholarly journals Extraction and Analysis of Tetrahydrocannabinol, A Cannabis Compound in Oral Fluid

2016 ◽  
Vol 9 (1) ◽  
pp. 30
Author(s):  
Wei Zhang ◽  
Jun Wang ◽  
Zhiyuan Mi ◽  
Jiangtao Su ◽  
Xiangyu You ◽  
...  
Keyword(s):  
Drug Testing ◽  
Oral Fluid ◽  
Solid Phase ◽  
Extraction Methods ◽  
Liquid Extraction ◽  
Phase Extraction ◽  
Advantages And Disadvantages ◽  
Liquid Liquid Extraction ◽  
The Common ◽  
Common Target

Although misuse and abuse of Cannabis is well known, the health benefits have been proved by various biomedical studies. Tetrahydrocannabinol (THC) is the major active substance in leaves of Cannabis, which is the common target for drug testing. In field drug testing, oral fluid (OF) has its unique advantages over other specimens such as blood, urine, and hair. Thus the study of THC in OF is gaining popularity in Cannabis research. In this review, extraction methods are introduced in three categories, which are Liquid-Liquid Extraction (LLE), Solid Phase Extraction (SPE), and Supercritical Fluid Extraction (SFE). Examples of application with each method will be covered. Advantages and disadvantages of these methods will be compared. In addition, methods in analysis following extraction will be briefly discussed.

scholarly journals Physical Methods of Microalgal Biomass Pretreatment

2014 ◽  
Vol 28 (3) ◽  
pp. 341-348 ◽  
Author(s):  
Agata Piasecka ◽  
Izabela Krzemińska ◽  
Jerzy Tys
Keyword(s):  
Alternative Energy ◽  
Lipid Extraction ◽  
Physical Method ◽  
Extraction Methods ◽  
Biodiesel Production ◽  
Biomass Pretreatment ◽  
Microalgal Biomass ◽  
Alternative Energy Sources ◽  
Wet Biomass ◽  
Microwave Techniques

Abstract The prospect of depletion of natural energy resources on the Earth forces researchers to seek and explore new and alternative energy sources. Biomass is a composite resource that can be used in many ways leading to diversity of products. Therefore, microalgal biomass offers great potential. The main aim of this study is to find the best physical method of microalgal biomass pretreatment that guarantees efficient lipid extraction. These studies identifies biochemical composition of microalgal biomass as source for biodisel production. The influence of drying at different temperatures and lyophilization was investigated. In addition, wet and untreated biomass was examined. Cell disruption (sonication and microwave) techniques were used to improve lipid extraction from wet biomass. Additionally, two different extraction methods were carried out to select the best method of crude oil extraction. The results of this study show that wet biomass after sonication is the most suitable for extraction. The fatty acid composition of microalgal biomass includes linoleic acid (C18:2), palmitic acid (C16:0), oleic acid (C18:1), linolenic acid (C18:3), and stearic acid (C18:0), which play a key role in biodiesel production.

Sign in / Sign up

Export Citation Format

Share Document