scholarly journals Thymoquinone-Loaded Chitosan Nanoparticles as Natural Preservative Agent in Cosmetic Products

2022 ◽  
Vol 23 (2) ◽  
pp. 898
Author(s):  
María Mondéjar-López ◽  
Alberto José López-Jiménez ◽  
Joaquín C. García Martínez ◽  
Oussama Ahrazem ◽  
Lourdes Gómez-Gómez ◽  
...  
Keyword(s):  
Particle Size ◽  
Chemical Structure ◽  
Chitosan Nanoparticles ◽  
Antimicrobial Properties ◽  
Release Profile ◽  
Current Status ◽  
Cosmetic Products ◽  
Natural Preservative ◽  
Microbial Contaminants ◽  
20 Nm

The current status of controversy regarding the use of certain preservatives in cosmetic products makes it necessary to seek new ecological alternatives that are free of adverse effects on users. In our study, the natural terpene thymoquinone was encapsulated in chitosan nanoparticles. The nanoparticles were characterized by DLS and TEM, showing a particle size of 20 nm. The chemical structure, thermal properties, and release profile of thymoquinone were evaluated and showed a successful stabilization and sustained release of terpenes. The antimicrobial properties of the nanoparticles were evaluated against typical microbial contaminants found in cosmetic products, showing high antimicrobial properties. Furthermore, natural moisturizing cream inoculated with the aforementioned microorganisms was formulated with thymoquinone-chitosan nanoparticles to evaluate the preservative efficiency, indicating its promising use as a preservative in cosmetics.

scholarly journals Biogenic Silver Nanoparticles from Iris tuberosa as Potential Preservative in Cosmetic Products

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4696
Author(s):  
Maria Mondéjar-López ◽  
Alberto José López-Jiménez ◽  
Minerva Abad-Jordá ◽  
Angela Rubio-Moraga ◽  
Oussama Ahrazem ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Challenge Test ◽  
Antimicrobial Properties ◽  
Cosmetic Products ◽  
Biogenic Silver Nanoparticles ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Scattering Technique ◽  
Microbial Contaminants ◽  
Light Scattering Technique

Biogenic-silver nanoparticles emerge as new nanosilver platforms that allow us to obtain silver nanoparticles via “green chemistry”. In our study, biogenic-silver nanoparticles were obtained from Iris tuberosa leaf extract. Nanoparticles were characterized by a UV-vis spectroscopy, dynamical light scattering technique. The transmission electron microscope revealed spheric and irregular nanoparticles with 5 to 50 nm in diameter. Antimicrobial properties were evaluated against typical microbial contaminants found in cosmetic products, showing high antimicrobial properties. Furthermore, natural moisturizing cream was formulated with biogenic-silver nanoparticles to evaluate the preservative efficiency through a challenge test, indicating its promising use as preservative in cosmetics.

The effect of Tin additionon on Structural and magnetic properties of the stannoferrite Li0.5+0.5XFe2.5-1.5XSnXO4

2016 ◽  
Vol 12 (3) ◽  
pp. 4307-4321 ◽  
Author(s):  
Ahmed Hassan Ibrahim ◽  
Yehia Abbas
Keyword(s):  
Particle Size ◽  
Fine Particles ◽  
Magnetic Moments ◽  
Lithium Ferrite ◽  
Tem Analysis ◽  
Weiss Temperature ◽  
X Ray ◽  
Two Phases ◽  
Nanocrystalline Ferrite ◽  
20 Nm

The physical properties of ferrites are verysensitive to microstructure, which in turn critically dependson the manufacturing process.Nanocrystalline Lithium Stannoferrite system Li0.5+0.5XFe2.5-1.5XSnXO4,X= (0, 0.2, 0.4, 0.6, 0.8 and 1.0) fine particles were successfully prepared by double sintering ceramic technique at pre-sintering temperature of 500oC for 3 h andthepre-sintered material was crushed and sintered finally in air at 1000oC.The structural and microstructural evolutions of the nanophase have been studied using X-ray powder diffraction (XRD) and the Rietveld method.The refinement results showed that the nanocrystalline ferrite has a two phases of ordered and disordered phases for polymorphous lithium Stannoferrite.The particle size of as obtained samples were found to be ~20 nm through TEM that increases up to ~ 85 nmand isdependent on the annealing temperature. TEM micrograph reveals that the grains of sample are spherical in shape. (TEM) analysis confirmed the X-ray results.The particle size of stannic substituted lithium ferrite fine particle obtained from the XRD using Scherrer equation.Magneticmeasurements obtained from lake shore’s vibrating sample magnetometer (VSM), saturation magnetization ofordered LiFe5O8 was found to be (57.829 emu/g) which was lower than disordered LiFe5O8(62.848 emu/g).Theinterplay between superexchange interactions of Fe3+ ions at A and B sublattices gives rise to ferrimagnetic ordering of magnetic moments,with a high Curie-Weiss temperature (TCW ~ 900 K).

Study of 5-Fluorouracil Loaded Chitosan Nanoparticles for Treatment of Skin Cancer

2020 ◽  
Vol 14 (3) ◽  
pp. 210-224
Author(s):  
Gayatri Patel ◽  
Bindu K.N. Yadav
Keyword(s):  
Particle Size ◽  
Controlled Release ◽  
Skin Cancer ◽  
Basal Cell Carcinoma ◽  
Cell Carcinoma ◽  
Basal Cell ◽  
Chitosan Nanoparticles ◽  
Entrapment Efficiency ◽  
Fractional Factorial ◽  
Spherical Particles

Background: The purpose of this study was to formulate, characterize and in-vitro cytotoxicity of 5-Fluorouracil loaded controlled release nanoparticles for the treatment of skin cancer. The patents on nanoparticles (US8414926B1), (US61654404A), (WO2007150075A3) etc. helped in the selection polymers and method for the preparation of nanoparticles. Methods: In the present study nanoparticles were prepared by simple ionic gelation method using various concentrations of chitosan and sodium tripolyphosphate (TPP). Several process and formulation parameters were screened and optimized using 25-2 fractional factorial design. The prepared nanoparticles were evaluated for particle size, shape, charge, entrapment efficiency, crosslinking mechanism and drug release study. Results: The optimized 5-Fluorouracil loaded nanoparticle were found with particle size of of 320±2.1 nm, entrapment efficiency of 85.12%± 1.1% and Zeta potential of 29mv±1mv. Scanning electron microscopy and dynamic light scattering technique revealed spherical particles with uniform size. The invitro release profile showed controlled release up to 24 hr. Further study was carried using A375 basal cell carcinoma cell-line to elucidate the mechanism of its cytotoxicity by MTT assay. Conclusion: These results demonstrate that the possibility of delivering 5-Fluorouracil to skin with enhanced encapsulation efficiency indicating effectiveness of the formulation for treatment of basal cell carcinoma type of skin cancer.

Nanostructured Polymetallic Powders to Create New Functional Materials on its Base

2015 ◽  
Vol 670 ◽  
pp. 49-54 ◽  
Author(s):  
Yuriy A. Zaharov ◽  
Valeriy M. Pugachev ◽  
Kseniya A. Datiy ◽  
Anna N. Popova ◽  
Anastasiya S. Valnyukova ◽  
...  
Keyword(s):  
Particle Size ◽  
Phase Diagrams ◽  
Spatial Organization ◽  
Functional Materials ◽  
Particle Morphology ◽  
Cloud Type ◽  
Synthesis Conditions ◽  
Micron Size ◽  
Common Nature ◽  
20 Nm

In the paper, the particle morphology is considered and the slices of phase diagrams of nanosystems agreeable to the synthesis conditions are constructed according to the data obtained earlier by authors, as well as new results of the study of nanostructured Fe-Co, Fe-Ni, Co-Ni, Fe-Co-Ni, Fe-Pt, Cu-Ni and Ni-Cd powders. It is found that all considered polymetallic systems have common nature of the particle size spatial organization, i.e., 7-20 nm nanocrystals (for different systems) form highly compact aggregates (40-100 nm) which put together into loose porous agglomerates (up to 200-250 nm) and then into unconsolidated micron size formation of cloud type. It is classified uncovered features of nanostructured polymetallic phase diagrams in comparison with phase diagrams of bulk systems. Magnetic properties of nanosystems are studied.

scholarly journals Formulation of Quaternized Aminated Chitosan Nanoparticles for Efficient Encapsulation and Slow Release of Curcumin

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 449
Author(s):  
Ahmed M. Omer ◽  
Zyta M. Ziora ◽  
Tamer M. Tamer ◽  
Randa E. Khalifa ◽  
Mohamed A. Hassan ◽  
...  
Keyword(s):  
Slow Release ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
Gastric Fluid ◽  
Release Profile ◽  
Simulated Gastric Fluid ◽  
Maximum Value ◽  
Structure Surface ◽  
Drug Encapsulation Efficiency

An effective drug nanocarrier was developed on the basis of a quaternized aminated chitosan (Q-AmCs) derivative for the efficient encapsulation and slow release of the curcumin (Cur)-drug. A simple ionic gelation method was conducted to formulate Q-AmCs nanoparticles (NPs), using different ratios of sodium tripolyphosphate (TPP) as an ionic crosslinker. Various characterization tools were employed to investigate the structure, surface morphology, and thermal properties of the formulated nanoparticles. The formulated Q-AmCs NPs displayed a smaller particle size of 162 ± 9.10 nm, and higher surface positive charges, with a maximum potential of +48.3 mV, compared to native aminated chitosan (AmCs) NPs (231 ± 7.14 nm, +32.8 mV). The Cur-drug encapsulation efficiency was greatly improved and reached a maximum value of 94.4 ± 0.91%, compared to 75.0 ± 1.13% for AmCs NPs. Moreover, the in vitro Cur-release profile was investigated under the conditions of simulated gastric fluid [SGF; pH 1.2] and simulated colon fluid [SCF; pH 7.4]. For Q-AmCs NPs, the Cur-release rate was meaningfully decreased, and recorded a cumulative release value of 54.0% at pH 7.4, compared to 73.0% for AmCs NPs. The formulated nanoparticles exhibited acceptable biocompatibility and biodegradability. These findings emphasize that Q-AmCs NPs have an outstanding potential for the delivery and slow release of anticancer drugs.

scholarly journals Chitosan Nanocarrier Entrapping Hydrophilic Drugs as Advanced Polymeric System for Dual Pharmaceutical and Cosmeceutical Application: A Comprehensive Analysis Using Box-Behnken Design

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 677
Author(s):  
Sara A. Abosabaa ◽  
Aliaa N. ElMeshad ◽  
Mona G. Arafa
Keyword(s):  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Chitosan Nanoparticles ◽  
Optimization Procedure ◽  
Entrapment Efficiency ◽  
Chitosan Solution ◽  
Polydispersity Index ◽  
Successful Implementation ◽  
Solution Ph ◽  
Box Behnken Design

The objective of the present research is to propose chitosan as a nanocarrier for caffeine—a commonly used drug in combating cellulite. Being a hydrophilic drug, caffeine suffers from insufficient topical penetration upon application on the skin. Chitosan nanoparticles loaded with caffeine were prepared via the ionic gelation technique and optimized according to a Box–Behnken design. The effect of (A) chitosan concentration, (B) chitosan solution pH, and (C) chitosan to sodium tripolyphosphate mass ratio on (Y1) entrapment efficiency percent, (Y2) particle size, (Y3) polydispersity index, and (Y4) zeta potential were studied. Subsequently, the desired constraints on responses were applied, and validation of the optimization procedure was confirmed by the parameters exhibited by the optimal formulation. A caffeine entrapment efficiency percent of 17.25 ± 1.48%, a particle size of 173.03 ± 4.32 nm, a polydispersity index of 0.278 ± 0.01, and a surface charge of 41.7 ± 3.0 mV were attained. Microscopical evaluation using transmission electron microscope revealed a typical spherical nature of the nanoparticles arranged in a network with a further confirmation of the formation of particles in the nano range. The results proved the successful implementation of the Box–Behnken design for optimization of chitosan-based nanoparticles in the field of advanced polymeric systems for pharmaceutical and cosmeceutical applications.

Preparation of Ginger Oil in Water Nanoemulsion Using Phase Inversion Composition Technique: Effects of Stirring and Water Addition Rates on their Physico-Chemical Properties and Stability

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Ashraf Farshbaf-Sadigh ◽  
Hoda Jafarizadeh-Malmiri ◽  
Navideh Anarjan ◽  
Yahya Najian
Keyword(s):  
Particle Size ◽  
Phase Inversion ◽  
Antimicrobial Properties ◽  
Chemical Properties ◽  
Water Addition ◽  
Chromatography Method ◽  
Stirring Rate ◽  
Physico Chemical ◽  
Oil In Water ◽  
Addition Rate

Abstract Ginger oil in water (O/W) nanoemulsions, were produced using phase inversion composition method and Tween 80, as emulsifier. Effects of processing parameters namely, stirring rate (100 to1000 rpm) and water addition rate (1–10 mL/min) were evaluated on the physico-chemical, morphological, antioxidant and antimicrobial properties of the prepared O/W nanoemulsions using response surface methodology (RSM). Results indicated that well dispersed and spherical ginger nanodroplets were formed in the nanoemulsions with minimum particle size (8.80 nm) and polydispersity index (PDI, 0.285) and maximum zeta potential value (−9.15 mV), using stirring rate and water addition rate of 736 rpm and 8.18 mL/min, respectively. Insignificant differences between predicted and experimental values of the response variables, indicated suitability of fitted models using RSM. Mean particle size of the prepared nanoemulsion using optimum conditions were changed from 8.81 ± 1 to 9.80 ± 1 nm, during 4 weeks of storage, which revealed high stability of the resulted ginger O/W nanoemulsion. High antioxidant activity (55.4%), bactericidal (against Streptococcus mutans) and fungicidal (against Aspergillus niger) activities of the prepared nanoemulsion could be related to the presence of gingerols and shogaols, a group of phenolic alkanones, in the ginger oil, which those were detected by gas chromatography method.

scholarly journals Antimicrobial Properties and Release Profile of Ampicillin from Electrospun Poly(εepsilon;-caprolactone) Nanofiber Yarns

2010 ◽  
Vol 5 (4) ◽  
pp. 155892501000500 ◽  
Author(s):  
Hang Liu ◽  
Karen K. Leonas ◽  
Yiping Zhao
Keyword(s):  
In Vitro Release ◽  
Antimicrobial Properties ◽  
Fiber Surface ◽  
Electrospun Nanofibers ◽  
Release Profile ◽  
Burst Release ◽  
Spun Yarns ◽  
Surgical Sutures ◽  
Release Model

Poly(εepsilon;-caprolactone) (PCL) electrospun fibers containing ampicillin sodium salt have been produced and twisted into nanofiber yarns. The fiber diameters and crystallinity, the in vitro antimicrobial properties of the yarns, and the in vitro release of ampicillin from yarns containing various ampicillin concentrations are studied. Decreased fiber diameters and reduced diameter variation are observed with the addition of ampicillin salt into the polymer solution. The results from the zone of inhibition test of the yarns against both gram-positive Staphylococcus aureus and gram-negative Klebsiella pneumoniae indicate that the released ampicillin retains its effectiveness after the production processes, therefore the as-spun yarns are antimicrobial active. A burst release of ampicillin from the yarns has been observed in the first hour, and the release is almost completed in 96 hours. The burst release is believed to be due to the low compatibility of ampicillin with PCL, the accumulation of ampicillin on fiber surface and the small fiber diameters. An empirical release model is developed to describe the release profile. The results indicate that the electrospun nanofibers yarns will have a great potential to be used for biomaterials, such as surgical sutures, to decrease the surgical site infection rate.

Chitosan nanoparticles for tamoxifen delivery and cytotoxicity to MCF-7 and Vero cells

2011 ◽  
Vol 83 (11) ◽  
pp. 2027-2040 ◽  
Author(s):  
Neralakere Ramanna Ravikumara ◽  
Basavaraj Madhusudhan
Keyword(s):  
Particle Size ◽  
Chitosan Nanoparticles ◽  
Vero Cells ◽  
In Vitro Cytotoxicity ◽  
Correlation Spectroscopy ◽  
Scanning Calorimetry ◽  
Ζ Potential ◽  
Human Red Blood Cells ◽  
Tamoxifen Citrate

In this study, tamoxifen citrate-loaded chitosan nanoparticles (tamoxcL-ChtNPs) and tamoxifen citrate-free chitosan nanoparticles (tamoxcF-ChtNPs) were prepared by an ionic gelation (IG) method. The physicochemical properties of the nanoparticles were analyzed for particle size, zeta (ζ) potential, and other characteristics using photon correlation spectroscopy (PCS), zeta phase analysis light scattering (PALS), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and differential scanning calorimetry (DSC). The variation in particle size was assessed by changing the concentration of chitosan, pentasodium tripolyphosphate (TPP), and the pH of the solution. The optimized tamoxcL-ChtNPs showed mean diameter of 187 nm, polydispersity of 0.125, and ζ-potential of +19.1 mV. The encapsulation efficiency (EE) of tamoxifen citrate (tamoxc) increased at higher concentrations, and release of tamoxc from the chitosan matrix displayed controlled biphasic behavior. Those tamoxcL-ChtNPs tested for chemosensitivity showed dose- and time-dependent antiproliferative activity of tamoxc. Further, tamoxcL-ChtNPs were found to be hemocompatible with human red blood cells (RBCs) and safe by in vitro cytotoxicity tests, suggesting that they offer promise as drug delivery systems in therapy.

Sign in / Sign up

Export Citation Format

Share Document