scholarly journals Cellulose Nanocrystal and Water-Soluble Cellulose Derivative Based Electromechanical Bending Actuators

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2294
Author(s):  
Daniela M. Correia ◽  
Erlantz Lizundia ◽  
Rafaela M. Meira ◽  
Mikel Rincón-Iglesias ◽  
Senentxu Lanceros-Méndez
Keyword(s):  
Composite Films ◽  
Chemical Properties ◽  
Methyl Cellulose ◽  
Water Soluble ◽  
Cellulose Derivative ◽  
Dihydrogen Phosphate ◽  
Cellulose Derivatives ◽  
Free Standing ◽  
Maximum Displacement ◽  
Soft Actuators

This study reports a versatile method for the development of cellulose nanocrystals (CNCs) and water-soluble cellulose derivatives (methyl cellulose (MC), hydroxypropyl cellulose (HPC), and sodium carboxymethyl cellulose (NaCMC)) films comprising the ionic liquid (IL) 2-hydroxy-ethyl-trimethylammonium dihydrogen phosphate ([Ch][DHP]) for actuator fabrication. The influence of the IL content on the morphology and physico–chemical properties of free-standing composite films was evaluated. Independently of the cellulose derivative, the ductility of the films increases upon [Ch][DHP] incorporation to yield elongation at break values of nearly 15%. An increase on the electrical conductivity as a result of the IL incorporation into cellulosic matrices is found. The actuator performance of composites was evaluated, NaCMC/[Ch][DHP] showing the maximum displacement along the x-axis of 9 mm at 8 Vpp. Based on the obtained high electromechanical actuation performance, together with their simple processability and renewable nature, the materials fabricated here represent a step forward in the development of sustainable soft actuators of high practical relevance.

scholarly journals Effect of 1,4-Napthaquinone (NQ) and benzophenone (BPH)on the photodegradation and biodegradation of methyl cellulose film

2010 ◽  
Vol 7 (1) ◽  
pp. 737-744
Author(s):  
Baghdad Science Journal
Keyword(s):  
Molecular Weight ◽  
Film Thickness ◽  
Carbonyl Compounds ◽  
Methyl Cellulose ◽  
Chain Scission ◽  
Cellulose Derivative ◽  
Accelerated Weathering ◽  
Cellulose Derivatives ◽  
Photodegradation Rate ◽  
Aromatic Carbonyl Compounds

The induced photodegradation of methyl cellulose (MC) films in air was investigated in the absence and presence of aromatic carbonyl compounds(photosenssitizers): 1,4-naphthaquinone (NQ) and benzophenone (BPH) by accelerated weathering tester. The addition of (0.01 wt %) of low molecular weight aromatic carbonyl compounds to cellulose derivatives films(25µm in thickness) enhanced the photodegradation of the polymer films.The photodegradation rate was measured by the increase in carbonyl absorbance. Decreases in solution viscosity and reduction of molecular weight were also observed in the irradiated samples. Changes in the number-average chain scission, the degree of deterioration and in the quantum yield of chain scission values are also observed, and it was concluded that branching or cross-linking has occurred for cellulose derivative with NQ and BPH. Findings from all analytical techniques indicated that the 1,4-naphthaquinone (NQ) photosensitizer enhance the photodegradation of methyl cellulose more than benzophenone (BPH). The effect of the photosensitizer concentration, (ranging from 0.01 to 0.1 %), on the rate of photodegradation was also monitored for MC films. The rates are increased with increasing the photosensitizer concentration. The effect of film thickness is also studied at fixed sensitizer concentration (0.05%), and results show that the rate of cellulose derivative photodegradation decreases with increasing film thickness. The rate constants of the photodegradation of the photosensitizers deduced in cellulose derivatives films, [at concentration of (0.1%)by weight and thickness (25µm)]. Biodegradation of irradiated cellulose derivatives films was conclusively established with bacteria type Pseudomonas aeuroginosa Rb-19 isolated from crude oil. The amount of bacteria growth on MC after 30 days was lower, while there was no growth observed in MC with BPH

Polymers as Ophthalmic Lubricating Agents

1987 ◽  
Vol 110 ◽  
Author(s):  
S. Kalachandra ◽  
D. O. Shah
Keyword(s):  
Surface Tension ◽  
Contact Angle ◽  
Polymer Solutions ◽  
Chemical Properties ◽  
Surface Characteristics ◽  
Water Soluble ◽  
Cellulose Derivatives ◽  
Water Soluble Polymer ◽  
The Coefficient Of Friction ◽  
Pmma Surface

AbstractPhysio-chemical properties such as coefficients of friction between low energy surfaces (PMMA/PMMA), surface tension, contact angle and viscosity of various water soluble polymer solutions ( 3–62cp) were measured at ambient temperature. The results showed that the surface tension and the contact angle are independent of viscosity of each polymer. The analysis of the data revealed that the system is operating in a region of “Boundary Lubrication”. It is seen, beyond 30 cp viscosity of almost all polymer solutions, the coefficient friction has been found to be independent of viscosity.Polyvinyl alcohol appears to have better lubricity in the vicinity of 30 cp viscosity or lower values than the cellulose derivatives and dextran. Hydrophobic interaction between PMMA surface and vinyl backbone may be responsible for this observation.It appears that the coefficient of friction of these polymer solutions depends on the structure, conformation and adsorption characteristics of polymers as well as surface characteristics of sliding surfaces, load, speed and viscosity.

Amorphous and Crystalline Particulates: Challenges and Perspectives in Drug Delivery

2017 ◽  
Vol 23 (3) ◽  
pp. 350-361 ◽  
Author(s):  
Hisham Al-Obaidi ◽  
Mridul Majumder ◽  
Fiza Bari
Keyword(s):  
Crystal Engineering ◽  
Drug Carrier ◽  
Solid Dispersions ◽  
Chemical Properties ◽  
Pharmaceutical Product ◽  
Water Soluble ◽  
Amorphous Form ◽  
Physico Chemical ◽  
Water Soluble Drugs ◽  
Amorphous Drug

Crystalline and amorphous dispersions have been the focus of academic and industrial research due to their potential role in formulating poorly water-soluble drugs. This review looks at the progress made starting with crystalline carriers in the form of eutectics moving towards more complex crystalline mixtures. It also covers using glassy polymers to maintain the drug as amorphous exhibiting higher energy and entropy. However, the amorphous form tends to recrystallize on storage, which limits the benefits of this approach. Specific interactions between the drug and the polymer may retard this spontaneous conversion of the amorphous drug. Some studies have shown that it is possible to maintain the drug in the amorphous form for extended periods of time. For the drug and the polymer to form a stable mixture they have to be miscible on a molecular basis. Another form of solid dispersions is pharmaceutical co-crystals, for which research has focused on understanding the chemistry, crystal engineering and physico-chemical properties. USFDA has issued a guidance in April 2013 suggesting that the co-crystals as a pharmaceutical product may be a reality; but just not yet! While some of the research is still oriented towards application of these carriers, understanding the mechanism by which drug-carrier miscibility occurs is also covered. Within this context is the use of thermodynamic models such as Flory-Huggins model with some examples of studies used to predict miscibility.

scholarly journals Insights on Molecular Characteristics of Hydrochars by 13C-NMR and Off-Line TMAH-GC/MS and Assessment of Their Potential Use as Plant Growth Promoters

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1026 ◽  
Author(s):  
Laís G. Fregolente ◽  
João Vitor dos Santos ◽  
Giovanni Vinci ◽  
Alessandro Piccolo ◽  
Altair B. Moreira ◽  
...  
Keyword(s):  
Plant Growth ◽  
Phosphoric Acid ◽  
13C Nmr ◽  
Chemical Properties ◽  
Water Soluble ◽  
Molecular Characteristics ◽  
Initial Growth ◽  
Growth Promoters ◽  
Molecular Features ◽  
Potential Use

Hydrochar is a carbon-based material that can be used as soil amendment. Since the physical-chemical properties of hydrochar are mainly assigned to process parameters, we aimed at evaluating the organic fraction of different hydrochars through 13C-NMR and off-line TMAH-GC/MS. Four hydrochars produced with sugarcane bagasse, vinasse and sulfuric or phosphoric acids were analyzed to elucidate the main molecular features. Germination and initial growth of maize seedlings were assessed using hydrochar water-soluble fraction to evaluate their potential use as growth promoters. The hydrochars prepared with phosphoric acid showed larger amounts of bioavailable lignin-derived structures. Although no differences were shown about the percentage of maize seeds germination, the hydrochar produced with phosphoric acid promoted a better seedling growth. For this sample, the greatest relative percentage of benzene derivatives and phenolic compounds were associated to hormone-like effects, responsible for stimulating shoot and root elongation. The reactions parameters proved to be determinant for the organic composition of hydrochar, exerting a strict influence on molecular features and plant growth response.

scholarly journals A Review on Coordination Properties of Al(III) and Fe(III) toward Natural Antioxidant Molecules: Experimental and Theoretical Insights

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2603
Author(s):  
Luana Malacaria ◽  
Giuseppina Anna Corrente ◽  
Amerigo Beneduci ◽  
Emilia Furia ◽  
Tiziana Marino ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Natural Antioxidants ◽  
Point Of View ◽  
Water Soluble ◽  
Natural Antioxidant ◽  
Theoretical Point ◽  
Structure And Properties ◽  
Coordination Properties ◽  
Soluble Molecule ◽  
Living Organisms

This review focuses on the ability of some natural antioxidant molecules (i.e., hydroxycinnamic acids, coumarin-3-carboxylic acid, quercetin, luteolin and curcumin) to form Al(III)- and Fe(III)-complexes with the aim of evaluating the coordination properties from a combined experimental and theoretical point of view. Despite the contributions of previous studies on the chemical properties and biological activity of these metal complexes involving such natural antioxidants, further detailed relationships between the structure and properties are still required. In this context, the investigation on the coordination properties of Al(III) and Fe(III) toward these natural antioxidant molecules might deserve high interest to design water soluble molecule-based metal carriers that can improve the metal’s intake and/or its removal in living organisms.

scholarly journals Flexible Methyl Cellulose/Polyaniline/Silver Composite Films with Enhanced Linear and Nonlinear Optical Properties

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1225
Author(s):  
Ali Atta ◽  
Mostufa M. Abdelhamied ◽  
Ahmed M. Abdelreheem ◽  
Mohamed R. Berber
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Nonlinear Optical ◽  
Composite Films ◽  
Methyl Cellulose ◽  
Carbon Cluster ◽  
Nonlinear Susceptibility ◽  
Optical Parameters ◽  
Flexible Polymer

In order to potentiate implementations in optical energy applications, flexible polymer composite films comprising methyl cellulose (MC), polyaniline (PANI) and silver nanoparticles (AgNPs) were successfully fabricated through a cast preparation method. The composite structure of the fabricated film was confirmed by X-ray diffraction and infrared spectroscopy, indicating a successful incorporation of AgNPs into the MC/PANI blend. The scanning electron microscope (SEM) images have indicated a homogenous loading and dispersion of AgNPs into the MC/PANI blend. The optical parameters such as band gap (Eg), absorption edge (Ed), number of carbon cluster (N) and Urbach energy (Eu) of pure MC polymer, MC/PANI blend and MC/PANI/Ag films were determined using the UV optical absorbance. The effects of AgNPs and PANI on MC polymer linear optical (LO) and nonlinear optical (NLO) parameters including reflection extinction coefficient, refractive index, dielectric constant, nonlinear refractive index, and nonlinear susceptibility are studied. The results showed a decrease in the band gap of MC/PANI/AgNPs compared to the pure MC film. Meanwhile, the estimated carbon cluster number enhanced with the incorporation of the AgNPs. The inclusion of AgNPs and PANI has enhanced the optical properties of the MC polymer, providing a new composite suitable for energy conversion systems, solar cells, biosensors, and nonlinear optical applications.

scholarly journals Application of a water-soluble cobalt redox couple in free-standing cellulose films for thermal energy harvesting

2019 ◽  
Vol 297 ◽  
pp. 669-675 ◽  
Author(s):  
Abuzar Taheri ◽  
Douglas R. MacFarlane ◽  
Cristina Pozo-Gonzalo ◽  
Jennifer M. Pringle
Keyword(s):  
Energy Harvesting ◽  
Thermal Energy ◽  
Water Soluble ◽  
Redox Couple ◽  
Free Standing ◽  
Cellulose Films ◽  
Thermal Energy Harvesting

On eccentricity-based topological descriptors of water-soluble dendrimers

2018 ◽  
Vol 74 (1-2) ◽  
pp. 25-33 ◽  
Author(s):  
Zahid Iqbal ◽  
Muhammad Ishaq ◽  
Adnan Aslam ◽  
Wei Gao
Keyword(s):  
Molecular Structure ◽  
Chemical Properties ◽  
Topological Indices ◽  
Water Soluble ◽  
Connectivity Index ◽  
Topological Descriptors ◽  
Physical And Chemical Properties ◽  
Eccentric Connectivity Index ◽  
Physical And Chemical ◽  
And Chemical Properties

AbstractPrevious studies show that certain physical and chemical properties of chemical compounds are closely related with their molecular structure. As a theoretical basis, it provides a new way of thinking by analyzing the molecular structure of the compounds to understand their physical and chemical properties. The molecular topological indices are numerical invariants of a molecular graph and are useful to predict their bioactivity. Among these topological indices, the eccentric-connectivity index has a prominent place, because of its high degree of predictability of pharmaceutical properties. In this article, we compute the closed formulae of eccentric-connectivity–based indices and its corresponding polynomial for water-soluble perylenediimides-cored polyglycerol dendrimers. Furthermore, the edge version of eccentric-connectivity index for a new class of dendrimers is determined. The conclusions we obtained in this article illustrate the promising application prospects in the field of bioinformatics and nanomaterial engineering.

Sign in / Sign up

Export Citation Format

Share Document