scholarly journals Study on Black Phosphorus Characteristics Using a Two-Step Thinning Method

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 615
Author(s):  
Qin Lu ◽  
Xiaoyang Li ◽  
Haifeng Chen ◽  
Yifan Jia ◽  
Tengfei Liu ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
High Performance ◽  
Electronic Devices ◽  
Argon Plasma ◽  
Annealing Process ◽  
Black Phosphorus ◽  
Ozone Treatment ◽  
Step Method ◽  
Impurities And Defects

A mild two-step method of black phosphorus (BP) flake thinning was demonstrated in this article. Slight ultraviolet–ozone (UVO) radiation followed by an argon plasma treatment was employed to oxidize mechanically exfoliated BP flakes and remove the surface remains of previous ozone treatment. The annealing process introduced aims to reduce impurities and defects. Low damage and efficient electronic devices were fabricated in terms of controlling the thickness of BP flakes through this method. These results lead to an important step toward the fabrication of high-performance devices based on two-dimensioned materials.

Organic Electronics

2020 ◽  
Author(s):  
Stephen R. Forrest
Keyword(s):  
Thin Film ◽  
Organic Electronics ◽  
Thin Film Transistors ◽  
High Performance ◽  
Electronic Devices ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Organic Thin Film ◽  
Graduate Studies ◽  
Organic Light

Organic electronics is a platform for very low cost and high performance optoelectronic and electronic devices that cover large areas, are lightweight, and can be both flexible and conformable to irregularly shaped surfaces such as foldable smart phones. Organics are at the core of the global organic light emitting device (OLED) display industry, and also having use in efficient lighting sources, solar cells, and thin film transistors useful in medical and a range of other sensing, memory and logic applications. This book introduces the theoretical foundations and practical realization of devices in organic electronics. It is a product of both one and two semester courses that have been taught over a period of more than two decades. The target audiences are students at all levels of graduate studies, highly motivated senior undergraduates, and practicing engineers and scientists. The book is divided into two sections. Part I, Foundations, lays down the fundamental principles of the field of organic electronics. It is assumed that the reader has an elementary knowledge of quantum mechanics, and electricity and magnetism. Background knowledge of organic chemistry is not required. Part II, Applications, focuses on organic electronic devices. It begins with a discussion of organic thin film deposition and patterning, followed by chapters on organic light emitters, detectors, and thin film transistors. The last chapter describes several devices and phenomena that are not covered in the previous chapters, since they lie outside of the current mainstream of the field, but are nevertheless important.

Study of Transcrystallization in Polymer Composites

1989 ◽  
Vol 170 ◽  
Author(s):  
Benjamin S. Hsiao ◽  
J. H. Eric
Keyword(s):  
Thermal Conductivity ◽  
Free Energy ◽  
Carbon Fiber ◽  
Plasma Treatment ◽  
Polymer Composites ◽  
High Performance ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
Semicrystalline Polymers ◽  
First Case

AbstractTranscrystallization of semicrystalline polymers, such as PEEK, PEKK and PPS, in high performance composites has been investigated. It is found that PPDT aramid fiber and pitch-based carbon fiber induce a transcrystalline interphase in all three polymers, whereas in PAN-based carbon fiber and glass fiber systems, transcrystallization occurs only under specific circumstances. Epitaxy is used to explain the surface-induced transcrystalline interphase in the first case. In the latter case, transcrystallization is probably not due to epitaxy, but may be attributed to the thermal conductivity mismatch. Plasma treatment on the fiber surface showed a negligible effect on inducing transcrystallization, implying that surface-free energy was not important. A microdebonding test was adopted to evaluate the interfacial strength between the fiber and matrix. Our preliminary results did not reveal any effect on the fiber/matrix interfacial strength of transcrystallinity.

Surface compositional changes in GaAs subjected to argon plasma treatment

2002 ◽  
Vol 202 (3-4) ◽  
pp. 183-198 ◽  
Author(s):  
C.C Surdu-Bob ◽  
J.L Sullivan ◽  
S.O Saied ◽  
R Layberry ◽  
M Aflori
Keyword(s):  
Plasma Treatment ◽  
Argon Plasma ◽  
Compositional Changes

scholarly journals Tuning the hierarchical pore structure of graphene oxide through dual thermal activation for high-performance supercapacitor

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jeongpil Kim ◽  
Jeong-Hyun Eum ◽  
Junhyeok Kang ◽  
Ohchan Kwon ◽  
Hansung Kim ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Pore Structure ◽  
Specific Capacitance ◽  
Surface Area ◽  
Thermal Annealing ◽  
High Performance ◽  
Annealing Process ◽  
Supercapacitor Electrode ◽  
Simple Method ◽  
Surface Areas

AbstractHerein, we introduce a simple method to prepare hierarchical graphene with a tunable pore structure by activating graphene oxide (GO) with a two-step thermal annealing process. First, GO was treated at 600 °C by rapid thermal annealing in air, followed by subsequent thermal annealing in N2. The prepared graphene powder comprised abundant slit nanopores and micropores, showing a large specific surface area of 653.2 m2/g with a microporous surface area of 367.2 m2/g under optimized conditions. The pore structure was easily tunable by controlling the oxidation degree of GO and by the second annealing process. When the graphene powder was used as the supercapacitor electrode, a specific capacitance of 372.1 F/g was achieved at 0.5 A/g in 1 M H2SO4 electrolyte, which is a significantly enhanced value compared to that obtained using activated carbon and commercial reduced GO. The performance of the supercapacitor was highly stable, showing 103.8% retention of specific capacitance after 10,000 cycles at 10 A/g. The influence of pore structure on the supercapacitor performance was systematically investigated by varying the ratio of micro- and external surface areas of graphene.

Comparative studies of nitrogen plasma and argon plasma treatment on the strength of PBO fibre reinforced high-temperature resistant thermoplastic composite

2021 ◽  
pp. 095400832098729
Author(s):  
K Sudheendra ◽  
Jennifer Vinodhini ◽  
M Govindaraju ◽  
Shantanu Bhowmik
Keyword(s):  
Contact Angle ◽  
High Temperature ◽  
Plasma Treatment ◽  
Sessile Drop ◽  
Dynamic Contact Angle ◽  
Argon Plasma ◽  
Film Surface ◽  
Fibre Surface ◽  
Nitrogen Plasma ◽  
Thermoplastic Composite

The study involves the processing of a novel poly [1, 4-phenylene-cis-benzobisoxazole] (PBO) fibre reinforced high-temperature thermoplastic composite with polyaryletherketone (PAEK) as the matrix. The PBO fibre and the PAEK film surface was modified using the method of argon and nitrogen plasma treatment. The investigation primarily focuses on evaluating the tensile properties of the fabricated laminates and correlating it with the effect of plasma treatment, surface characteristics, and its fracture surface. A 5% decrease in tensile strength was observed post argon plasma treatment while a 27% increase in strength was observed post nitrogen plasma treatment. The morphology of the failure surface was investigated by scanning electron microscopy and an interfacial failure was observed. Furthermore, the effect of plasma on the wettability of PBO fibres and PAEK film surface was confirmed by the Dynamic Contact Angle analysis and sessile drop method respectively. FTIR spectral analysis was done to investigate the effect of plasma treatment on the chemical structure on the surface. The results of the wettability study showed that the argon plasma treatment of the fibre surface increased its hydrophobicity while nitrogen plasma treatment resulted in the reduction of contact angle.

scholarly journals A thin, deformable, high-performance supercapacitor implant that can be biodegraded and bioabsorbed within an animal body

2021 ◽  
Vol 7 (2) ◽  
pp. eabe3097
Author(s):  
Hongwei Sheng ◽  
Jingjing Zhou ◽  
Bo Li ◽  
Yuhang He ◽  
Xuetao Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Electronic Devices ◽  
Form Factors ◽  
Time Frame ◽  
Water Soluble ◽  
Two Dimensional ◽  
Medical Electronics ◽  
Thin Structure ◽  
Shed Light

It has been an outstanding challenge to achieve implantable energy modules that are mechanically soft (compatible with soft organs and tissues), have compact form factors, and are biodegradable (present for a desired time frame to power biodegradable, implantable medical electronics). Here, we present a fully biodegradable and bioabsorbable high-performance supercapacitor implant, which is lightweight and has a thin structure, mechanical flexibility, tunable degradation duration, and biocompatibility. The supercapacitor with a high areal capacitance (112.5 mF cm−2 at 1 mA cm−2) and energy density (15.64 μWh cm−2) uses two-dimensional, amorphous molybdenum oxide (MoOx) flakes as electrodes, which are grown in situ on water-soluble Mo foil using a green electrochemical strategy. Biodegradation behaviors and biocompatibility of the associated materials and the supercapacitor implant are systematically studied. Demonstrations of a supercapacitor implant that powers several electronic devices and that is completely degraded after implantation and absorbed in rat body shed light on its potential uses.

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

Influence of argon plasma treatment on polyethersulphone surface

Pramana ◽  
2013 ◽  
Vol 80 (1) ◽  
pp. 133-141 ◽  
Author(s):  
N L Singh ◽  
S M Pelagade ◽  
R S Rane ◽  
S Mukherjee ◽  
U P Deshpande ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Argon Plasma

Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment

2012 ◽  
Vol 499 ◽  
pp. 90-94 ◽  
Author(s):  
Jin Yun Xu ◽  
Wen Yu Wang ◽  
Xin Jin
Keyword(s):  
Molecular Weight ◽  
Low Temperature ◽  
Plasma Treatment ◽  
Treatment Time ◽  
Argon Plasma ◽  
Uhmwpe Fiber ◽  
Wetting Ability ◽  
Plasma Treatment Time ◽  
Uhmwpe Fibers ◽  
Ultra High Molecular Weight

To improve the adhesion between ultra-high-molecular-weight polyethylene (UHMWPE) fibers and matrix, the UHMWPE fibers were treated by low temperature argon-plasma. The effects of argon-plasma treatment on the properties of UHMWPE have been investigated. The roughness and wetting ability were all found to increase significantly after modifications. The tensile strength of UHMWE fibers were decreased with the plasma treatment time. The optimum plasma treatment is 2min.The increasing of roughness and wetting ability of UHMWPE fiber are beneficial to the improvement the adhesion between UHMWPE fiber and matrix.

Sign in / Sign up

Export Citation Format

Share Document