scholarly journals Ultrasound Assessment of Extracranial Carotids and Vertebral Arteries in Acute Cerebral Ischemia

Medicina ◽  
2020 ◽  
Vol 56 (12) ◽  
pp. 711
Author(s):  
Klearchos Psychogios ◽  
Georgios Magoufis ◽  
Odysseas Kargiotis ◽  
Apostolos Safouris ◽  
Eleni Bakola ◽  
...  
Keyword(s):  
Low Cost ◽  
Duplex Ultrasound ◽  
Subclavian Steal Syndrome ◽  
Therapeutic Implications ◽  
Atherosclerotic Lesions ◽  
Appropriate Treatment ◽  
Acute Cerebral Ischemia ◽  
Potential Applications ◽  
Ultrasound Assessment ◽  
Hemodynamic Information

Assessing ischemic etiology and mechanism during the acute phase of an ischemic stroke is crucial in order to tailor and monitor appropriate treatment and determine prognosis. Cervical Duplex Ultrasound (CDU) has evolved since many years as an excellent screening tool for the evaluation of extracranial vasculature. CDU has the advantages of a low cost, easily applicable, bed side examination with high temporal and spatial resolution and without exposing the patients to any significant complications. It represents an easily repeatable test that can be performed in the emergency room as a first-line examination of cervical artery pathology. CDU provides well validated estimates of the type of the atherosclerotic plaque, the degree of stenosis, as well as structural and hemodynamic information directly about extracranial vessels (e.g., subclavian steal syndrome) and indirectly about intracranial circulation. CDU may also aid the diagnosis of non-atherosclerotic lesions of vessel walls including dissections, arteritis, carotid-jugular fistulas and fibromuscular dysplasias. The present narrative review outlines all potential applications of CDU in acute stroke management and also highlights its potential therapeutic implications.

An Assessment of a Low-Cost Wastewater Disposal System after Twenty-Five Years of Operation

1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Wastewater Disposal ◽  
Industrial Base ◽  
Industrial Wastewaters ◽  
The Past ◽  
Gasification Process ◽  
Appropriate Treatment ◽  
Environmentally Safe ◽  
Coal Resource

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?

scholarly journals Visualization of Surface Acoustic Waves in Thin Liquid Films

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
R. W. Rambach ◽  
J. Taiber ◽  
C. M. L. Scheck ◽  
C. Meyer ◽  
J. Reboud ◽  
...  
Keyword(s):  
Liquid Film ◽  
Acoustic Waves ◽  
Low Cost ◽  
Thin Liquid Film ◽  
Surface Acoustic Waves ◽  
Liquid Films ◽  
Theoretical Description ◽  
Propagation Path ◽  
Microfluidic Channels ◽  
Potential Applications

Abstract We demonstrate that the propagation path of a surface acoustic wave (SAW), excited with an interdigitated transducer (IDT), can be visualized using a thin liquid film dispensed onto a lithium niobate (LiNbO3) substrate. The practical advantages of this visualization method are its rapid and simple implementation, with many potential applications including in characterising acoustic pumping within microfluidic channels. It also enables low-cost characterisation of IDT designs thereby allowing the determination of anisotropy and orientation of the piezoelectric substrate without the requirement for sophisticated and expensive equipment. Here, we show that the optical visibility of the sound path critically depends on the physical properties of the liquid film and identify heptane and methanol as most contrast rich solvents for visualization of SAW. We also provide a detailed theoretical description of this effect.

scholarly journals Recent Findings in Azaphilone Pigments

2021 ◽  
Vol 7 (7) ◽  
pp. 541
Author(s):  
Lúcia P. S. Pimenta ◽  
Dhionne C. Gomes ◽  
Patrícia G. Cardoso ◽  
Jacqueline A. Takahashi
Keyword(s):  
Water Solubility ◽  
Biological Activities ◽  
Low Cost ◽  
Scale Up ◽  
Structural Diversity ◽  
Downstream Processing ◽  
Global Market ◽  
Yield Improvement ◽  
Potential Applications ◽  
New Compounds

Filamentous fungi are known to biosynthesize an extraordinary range of azaphilones pigments with structural diversity and advantages over vegetal-derived colored natural products such agile and simple cultivation in the lab, acceptance of low-cost substrates, speed yield improvement, and ease of downstream processing. Modern genetic engineering allows industrial production, providing pigments with higher thermostability, water-solubility, and promising bioactivities combined with ecological functions. This review, covering the literature from 2020 onwards, focuses on the state-of-the-art of azaphilone dyes, the global market scenario, new compounds isolated in the period with respective biological activities, and biosynthetic pathways. Furthermore, we discussed the innovations of azaphilone cultivation and extraction techniques, as well as in yield improvement and scale-up. Potential applications in the food, cosmetic, pharmaceutical, and textile industries were also explored.

scholarly journals Color-Variable Photodynamic Antimicrobial Wool/Acrylic Blended Fabrics

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4141
Author(s):  
Tingting Wang ◽  
Wangbingfei Chen ◽  
Tingting Dong ◽  
Zihao Lv ◽  
Siming Zheng ◽  
...  
Keyword(s):  
Low Cost ◽  
Pathogen Transmission ◽  
Cationic Dyes ◽  
Light Illumination ◽  
Antibacterial Studies ◽  
Wool Fibers ◽  
Visible Light Illumination ◽  
Potential Applications ◽  
Dyed Fabrics ◽  
Acrylic Fibers

Towards the goal of developing scalable, economical and effective antimicrobial textiles to reduce infection transmission, here we prepared color-variable photodynamic materials comprised of photosensitizer (PS)-loaded wool/acrylic (W/A) blends. Wool fibers in the W/A blended fabrics were loaded with the photosensitizer rose bengal (RB), and the acrylic fibers were dyed with a variety of traditional cationic dyes (cationic yellow, cationic blue and cationic red) to broaden their color range. Investigations on the colorimetric and photodynamic properties of a series of these materials were implemented through CIELab evaluation, as well as photooxidation and antibacterial studies. Generally, the photodynamic efficacy of these dual-dyed fabrics was impacted by both the choice, and how much of the traditional cationic dye was employed in the dyeing of the W/A fabrics. When compared with the PS-only singly-dyed material, RB-W/A, that showed a 99.97% (3.5 log units; p = 0.02) reduction of Staphylococcus aureus under visible light illumination (λ ≥ 420 nm, 60 min), the addition of cationic dyes led to a slight decrease in the photoinactivation ability of the dual-dyed fabrics, but was still able to achieve a 99.3% inactivation of S. aureus. Overall, our findings demonstrate the feasibility and potential applications of low cost and color variable RB-loaded W/A blended fabrics as effective self-disinfecting textiles against pathogen transmission.

Synthesis and characterization of hyperbranched poly (sulfone-amine) modified β-cyclodextrin

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
Liang Chen ◽  
Peng He ◽  
Zhifeng Jia ◽  
Xinyuan Zhu ◽  
Deyue Yan
Keyword(s):  
Drug Delivery ◽  
Low Cost ◽  
Food Additives ◽  
Synthesis And Characterization ◽  
Good Solubility ◽  
Low Viscosity ◽  
Hyperbranched Poly ◽  
Potential Applications ◽  
Inclusion Ability

AbstractAn economical strategy to prepare hyperbranched poly(sulfone-amine) modified β-cyclodextrins (HPSA-m-CDs) from natural β-cyclodextrin (β-CD) and other commercially available materials has been reported. The final product has many good properties of hyperbranched poly(sulfone-amine)s (good solubility, low viscosity etc.), while its inclusion ability can also be well kept. It is a feasible approach to prepare functionalized modified cyclodextrin at very low cost, and may have potential applications in the fields of catalysis, drug delivery, food additives, etc.

A review of passive self-sensing tag

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 338-345 ◽  
Author(s):  
Yawei Xu ◽  
Lihong Dong ◽  
Haidou Wang ◽  
Jiannong Jing ◽  
Yongxiang Lu
Keyword(s):  
Radio Frequency Identification ◽  
Large Scale ◽  
Low Cost ◽  
Integrated Sensor ◽  
Content Type ◽  
Passive Sensing ◽  
Static Information ◽  
Potential Applications ◽  
Frequency Identification ◽  
Identification Tags

Purpose Radio frequency identification tags for passive sensing have attracted wide attention in the area of Internet of Things (IoT). Among them, some tags can sense the property change of objects without an integrated sensor, which is a new trend of passive sensing based on tag. The purpose of this paper is to review recent research on passive self-sensing tags (PSSTs). Design/methodology/approach The PSSTs reported in the past decade are classified in terms of sensing mode, composition and the ways of power supply. This paper presents operation principles of PSSTs and analyzes the characteristics of them. Moreover, the paper focuses on summarizing the latest sensing parameters of PSSTs and their matching equipment. Finally, some potential applications and challenges faced by this emerging technique are discussed. Findings PSST is suitable for long-term and large-scale monitoring compared to conventional sensors because it gets rid of the limitation of battery and has relatively low cost. Also, the static information of objects stored in different PSSTs can be identified by a single reader without touch. Originality/value This paper provides a detailed and timely review of the rapidly growing research in PSST.

Sintering and Hot-Pressing of Ti2AlC Obtained by SHS Process

2010 ◽  
Vol 63 ◽  
pp. 282-286 ◽  
Author(s):  
Leszek Chlubny ◽  
Jerzy Lis ◽  
Mirosław M. Bućko
Keyword(s):  
Hot Pressing ◽  
High Efficiency ◽  
Layer Structure ◽  
Low Cost ◽  
Max Phases ◽  
Fine Powders ◽  
High Temperature Synthesis ◽  
Low Energy Consumption ◽  
Potential Applications ◽  
Xrd Method

Some of ternary materials in the Ti-Al-C system are called MAX-phases and are characterised by heterodesmic layer structure. Their specific structure consisting of covalent and metallic chemical bonds influence its semi-ductile features locating them on the boundary between metals and ceramics, which may lead to many potential applications, for example as a part of a ceramic armour. Ti2AlC is one of this nanolaminate materials. Self-propagating High-temperature Synthesis (SHS) was applied to obtain sinterable powders of Ti2AlC Utilization of heat produced in exothermal reaction in adiabatic conditions to sustain process until all substrates are transformed into product is one of the advantages of the method that result in low energy consumption and low cost combined with high efficiency. Different substrates were used to produce fine powders of ternary material. Phase compositions of obtained powder were examined by XRD method. Than selected powders were used for sintering in various temperature both in a presureless sintering and hot-pressing in argon atmosphere. Properties and phase composition of obtained products were examined.

Pseudoelasticity of Cu-13.8Al-Ni Alloys Containing V and Nb

2008 ◽  
Vol 59 ◽  
pp. 101-107 ◽  
Author(s):  
Rodinei Medeiros Gomes ◽  
Ana Cris R. Veloso ◽  
V.T.L. Buono ◽  
Severino Jackson Guedes de Lima ◽  
Tadeu Antonio de Azevedo Melo
Keyword(s):  
Mechanical Properties ◽  
Shape Memory ◽  
Shape Recovery ◽  
Cold Water ◽  
Low Cost ◽  
Tensile Tests ◽  
Grain Refiner ◽  
Good Shape ◽  
Potential Applications ◽  
Superelastic Behavior

Polycrystalline copper-based shape memory alloys have been of particular interest in relation to Ni-Ti because of their low cost and good shape memory effect. Nevertheless the absence of a pronounced pseudoelasticity effect restricts the number of potential applications. In this work, the influence of Nb and V on the microstructure and the mechanical properties was investigated. Samples of Cu-13.8 Al-Ni containing V and Nb alloy were prepared by induction and solution treated at 850°C and then further quenched into cold water. The addition of Nb and V promotes the formation of precipitates which act as grain refiner and subsequently improve the mechanical properties. The tensile tests were performed at temperatures slightly inferior to Mf and superior to Af, to investigate the shape recovery and pseudoelasticity, respectively. Based on the analyses of the Cu-13,8Al-2Ni-1Nb (wt%) alloy was detected rupture strains greater than 14%, besides observation of the superelasticity of these alloys and quantification of this property by means of cycling, from 0 to strains between 1 and 7%. The studies performed on alloy Cu-13.8Al- 3,5Ni-1V (wt%) made it possible to determine rupture strains in the order of 3% and its superelastic behavior through cycling for deformations between 1 and 3%.

scholarly journals TRADITIONAL BONESETTERS

2016 ◽  
Vol 23 (06) ◽  
pp. 699-704
Author(s):  
Waqar Alam ◽  
Faaiz Ali Shah ◽  
Ashfaq Ahmed ◽  
Saeed Ahmad ◽  
Abdullah Shah
Keyword(s):  
Compartment Syndrome ◽  
Study Design ◽  
Low Cost ◽  
Cultural Beliefs ◽  
Case Series ◽  
Non Union ◽  
Appropriate Treatment ◽  
Accident And Emergency ◽  
Set Up ◽  
Study District

Objectives: To analyze the reasons for treatment by Traditional Bone Setters(TBS) and the frequency of complications in patients treated by traditional bone setters in our setup. Study Design: Descriptive case series. Place and Duration of Study: District HeadquarterHospital (DHQ) Temargarah & Lady Reading Hospital Peshawar and, Ghurki Trust TeachingHospital, Lahore from Dec 2014 to Nov 2015. Material and Methods: Patients of either genderor all ages received in outpatient department or accident and emergency of DHQ Temargarah,Lady Reading Hospital Peshawar and Ghurki Trust Teaching Hospital, Lahore with history oftrauma followed by treatment by local bonesetters were included in our study. After properhistory, examinations and investigations, appropriate treatment were given and complicationswere noted. Results: We received a total of 267 patients who were treated by Traditional bonesetters.186 were males and 81 were females. Age ranges from 1.5 years to 87 years. In majorityAdvice or pressure from family/friends taking the lead. 77(28.84%) of patients suffer because offamily or friends. 66(24.72%) of patients affected because of socio cultural beliefs, 46(17.23%)because of low cost, 35(13.11%) because of ignorance, 24(8.98%) because of fear of operation,19(7.12%) because of fear of amputation took their treatment from bone setters. The mostfrequent complication we received was malunion were found in 67(25.10%) and non-union in55(20.60%), Conclusion: Pressure from friends and family was the main reason for consultingTraditional Bone Setters for treatment in our set up and complications caused by their treatmentwere frequent and ranged from immediate compartment syndrome and gangrene of the limb tolate onset mal union, non-union and avascular non-union.

A Novel, Low-Cost C-C Composite Heat Sink Material

1996 ◽  
Vol 445 ◽  
Author(s):  
W. Kowbel ◽  
V. Chellappa ◽  
J.C. Withers
Keyword(s):  
Thermal Conductivity ◽  
Heat Sink ◽  
Low Cost ◽  
Mechanical And Thermal Properties ◽  
New Class ◽  
Dielectric Coatings ◽  
Potential Applications ◽  
New Material ◽  
New Type ◽  
Composite Heat

AbstractRapid advances in high power electronics packaging require the development of new heat sink materials. Advanced composites designed to provide thermal expansion control as well as improved thermal conductivity have the potential to provide benefits in the removal of excess heat from electronic devices. Carbon-carbon (C-C) composits are under consideration for several military and space electronic applications including SEM-E electronic boxes. The high cost of C-C composits has greatly hindered their wide spread commercialization. A new manufacturing process has been developed to produce high thermal conductivity (over 400 W/mK) C-C composites at greatly reduced cost (less than $50/lb). This new material has potential applications as both a heat sink and a substrate. Dielectric coatings such as A1N and diamond were applied to this new type of heat sink material. Processing, as well as mechanical and thermal properties of this new class of heat sink material will be presented.

Sign in / Sign up

Export Citation Format

Share Document