scholarly journals Dissimilar Welding of Low Alloy Steels Welded Joints: Effect of Run-Off and Run-On Plates

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 642
Author(s):  
Park Jeongung ◽  
Gyubaek An

The steel run-off plates attached at the start and end of a weld usually have the same material, shape, and groove as the base metal according to the rules for designing and constructing ship steel structures. However, rather than using the same grade of base steel, readily available steel is often used for these plates to increase material utilization. When using dissimilar grade steel as a run-off plate, the physical properties of the base metal may be diluted if the weld joint of the base plate is penetrated, thereby lowering the physical property value of the joint. If the physical properties of the welded part of the real structure are lowered because of the dilution of the properties of the dissimilar grade steel material, the safety of the entire structure can be affected. Therefore, in this study, analyses of the metal microstructure, hardness, impact, and chemical composition were performed on surfaces where the run-off plate was removed after welding to examine the effect of dissimilar run-off plate. The results of this study reveal that the properties of the run-off plate were not diluted toward the base metal and the Charpy impact value at the weld end was up to 48% greater than the impact value at the start of the weld at a temperature of −40 °C.

2020 ◽  
Vol 832 ◽  
pp. 137-146
Author(s):  
Monika Kubzová ◽  
Vit Křivý ◽  
Viktor Urban ◽  
Katerina Kreislova

This article deals with the topic of atmospheric corrosion. Atmospheric corrosion causes damage to nearly 80% of all existing steel structures. The main parameters of atmospheric corrosion are the time of wetness (TOW), air temperature and aggressive corrosive agents such as chlorides, sulfur dioxide and others. Currently, low alloy steels with improved atmospheric corrosion resistance called weathering steels are used for the steel structures located in outdoor environment. A protective layer of corrosion products is created on the steel surface and this layer can reduce continuation of corrosion of steel. The time of wetness together with the effect of aggressive corrosive agents are various for surfaces oriented vertically or horizontally. Experimental tests of atmospheric weathering steel were carried out to monitor the impact of location and position of surface on the different constructions. These tests allow monitoring the development of corrosion products in real exposures. The article presents a part of the research, which includes monitoring the development of the thickness of corrosion products with regard to the position on the structure. Research is developed to refine of prediction models with the aim of improving determination of corrosion losses during the service life of the structure. Second part of these experiments is dedicated to measuring the deposition rate of chlorides. Chlorides have a corrosive impact on the steel surface. Under normal conditions the chlorides does not create suitable environment for the development of a protective layer of corrosion products.


2020 ◽  
Vol 991 ◽  
pp. 3-9
Author(s):  
Herry Oktadinata ◽  
Winarto Winarto ◽  
Eddy S. Siradj

This work investigated microstructure and impact toughness of multi-pass flux-cored arc welded SM570-TMC steel. A comparison was made between weldments fabricated with average heat input of 0.9 kJ/mm and 1.4 kJ/mm, respectively. SM570 steel plate with 16 mm nominal thickness and 1.2 mm diameter of E81-Ni1 flux-cored wire were selected in this experiment. Multi-pass flux-cored arc welding (FCAW) was performed using carbon dioxide shielding gas. Then the weldments were observed using optical microscopy, scanning electron microscope (SEM) and electron probe micro analyzer (EPMA). The steel joint strength was measured via tensile test, and Charpy impact test was performed at three different test temperatures. The microstructure observation exhibited the base metal mainly consist of ferrite and pearlite features, while the weld metal contained the acicular ferrites, polygonal ferrites and M-A constituent at both different heat inputs. The impact toughness of base metal is superior than weld metals. The weld metals fabricated at average heat input of 0.9 kJ/mm have a higher low temperature impact toughness than using heat input of 1.4 kJ/mm. The acicular ferrites amount that significant reduced at the higher heat input may degrade the toughness at low temperature.


TAPPI Journal ◽  
2016 ◽  
Vol 15 (10) ◽  
pp. 643-651 ◽  
Author(s):  
ROBERT J. OGLESBY ◽  
HUMPHREY J. MOYNIHAN ◽  
RICARDO B. SANTOS ◽  
ASHOK GHOSH ◽  
PETER W. HART

The impact of commercially prepared, fully bleached pulp viscosity variation on handsheet physical properties was evaluated at different levels of pulp refining. Hardwood pulps from the same brownstock species mix, cooking parameters, and kappa numbers were processed through two different commercial bleach plants: one with a D0(EP)D1D2 sequence and the second with an OD0(EOP)D1 sequence. Additionally, a commercial softwood (predominately Scotts pine) brownstock pulp bleached by an OD0(EP)D1D2 sequence was employed in this study. Pulps with viscosities ranging from 14 to 21 mPa∙s were refined in a Valley beater to two freeness levels, and the associated handsheet physical properties were measured in this study. Over the pulp viscosity range of 14 to 21 mPa∙s, no clear correlation was found to exist between pulp viscosity and related paper physical properties. Finally, a series of laboratory prepared bleached pulps were purposely prepared under non-ideal conditions to reduce their final viscosities to lower values. Handsheets made from these pulps were tested in their unbeaten condition for physical strength properties. Significant and rapid strength loss occurred when the measured pulp viscosity dropped below 12 mPa∙s; overall strength properties showed no correlation to viscosity above the critical 12 mPa∙s value.


Alloy Digest ◽  
1993 ◽  
Vol 42 (4) ◽  

Abstract HASTELLOY ALLOY B-2 is a nickel-base alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures. Base metal data is available in Alloy Digest Ni-249, September 1977 This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: Ni-425. Producer or source: Haynes International Inc.


Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  

Abstract AMPCO-TRODE 10 is the most versatile aluminum bronze welding electrode in its family and is used for both similar and dissimilar welding. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on machining. Filing Code: CU-582. Producer or source: Ampco Metal Inc.


Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  

Abstract Domex 550MC is a hot-rolled, high-strength low-alloy (HSLA) steel for cold forming operations. It is available in thicknesses of 2.00-12.80 mm. The alloy meets or exceeds the requirements of S550MC in EN 10149-2. Applications include a wide range of fabricated components and steel structures, including truck chassis, crane booms, and earthmoving machines. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SA-594. Producer or source: SSAB Swedish Steel Inc.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1050
Author(s):  
Sylwia Cyboran-Mikołajczyk ◽  
Robert Pasławski ◽  
Urszula Pasławska ◽  
Kacper Nowak ◽  
Michał Płóciennik ◽  
...  

Long-term high fat-carbohydrates diet (HF-CD) contributes to the formation of irreversible changes in the organism that lead to the emergence of civilization diseases. In this study, the impact of three-month high-fat diet on the physical properties of erythrocytes (RBCs) was studied. Furthermore, the biological activity of Cistus incanus L. extracts, plant known with high pro-health potential, in relation to normal and HF-CD RBCs, was determined. Obtained results have shown that, applied HF-CD modified shape, membrane potential and osmotic resistance of erythrocytes causing changes in membrane lipid composition and the distribution of lipids. The impact of HF-CD on physical properties of RBCs along with atherosclerotic lesions of the artery was visible, despite the lack of statistically significant changes in blood morphology and plasma lipid profile. This suggests that erythrocytes may be good markers of obesity-related diseases. The studies of biological activity of Cistus incanus L. extracts have demonstrated that they may ameliorate the effect of HF-CD on erythrocytes through the membrane-modifying and antioxidant activity.


Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 378
Author(s):  
Li Zhao ◽  
Zhiwei Hu ◽  
Hanjie Guo ◽  
Christoph Geibel ◽  
Hong-Ji Lin ◽  
...  

We report on the synthesis and physical properties of cm-sized CoGeO3 single crystals grown in a high pressure mirror furnace at pressures of 80 bar. Direction dependent magnetic susceptibility measurements on our single crystals reveal highly anisotropic magnetic properties that we attribute to the impact of strong single ion anisotropy appearing in this system with TN∼33.5 K. Furthermore, we observe effective magnetic moments that are exceeding the spin only values of the Co ions, which reveals the presence of sizable orbital moments in CoGeO3.


2021 ◽  
pp. 096739112110060
Author(s):  
Mouna Werchefani ◽  
Catherine Lacoste ◽  
Hafedh Belguith ◽  
Chedly Bradai

The present work is a comparative study of the impact of Alfa fiber modifications on the Cereplast composites mechanical behavior. Various treatments have been employed, including mechanical, soda, saltwater-retting, hot-water treatments and enzymatic treatment using xylanase. Chemical and morphological analyses were carried out in order to determine the changes of the biochemical composition and the dimensions of fibers. Cereplast composites reinforced with Alfa fibers were fabricated using a twin-screw extrusion followed by an injection molding technique with a fiber load of 20 wt. %. Resulting materials were assessed by means of tensile, flexural and Charpy impact testing. Scanning Electron Microscopy analysis was carried out to investigate the interfacial properties of the composites. The results have shown a significant enhancement of mechanical strengths and rigidities for the xylanase-treated fiber composites, owing to the increase of cellulose content, the enhancement of defibrillation level and the improvement of matrix-fiber adhesion. The data proved that the technology of enzymes can be used as a powerful and eco-friendly approach to modify fiber surfaces and to increase their potential of reinforcement.


2012 ◽  
Vol 10 (H16) ◽  
pp. 478-479
Author(s):  
Patrick Michel ◽  

AbstractNEOShield is a European-Union funded project coordinated by the German Aero-space Center, DLR, to address near-Earth object (NEO) impact hazard mitigation issues. The NEOShield consortium consists of 13 research institutes, universities, and industrial partners from 6 countries and includes leading US and Russian space organizations. The project is funded for a period of 3.5 years from January 2012 with a total of 5.8 million euros. The primary aim of the project is to investigate in detail promising mitigation techniques, such as the kinetic impactor, blast deflection, and the gravity tractor, and devise feasible demonstration missions. Options for an international strategy for implementation when an actual impact threat arises will also be investigated.The NEOShield work plan consists of scientific investigations into the nature of the impact hazard and the physical properties of NEOs, and technical and engineering studies of practical means of deflecting NEOs. There exist many ideas for asteroid deflection techniques, many of which would require considerable scientific and technological development. The emphasis of NEOShield is on techniques that are feasible with current technology, requiring a minimum of research and development work. NEOShield aims to provide detailed designs of feasible mitigation demonstration missions, targeting NEOs of the kind most likely to trigger the first space-based mitigation action.Most of the asteroid deflection techniques proposed to date require physical contact with the threatening object, an example being the kinetic impactor. NEOShield includes research into the mitigation-relevant physical properties of NEOs on the basis of remotely-sensed astronomical data and the results of rendezvous missions, the observational techniques required to efficiently gather mitigation-relevant data on the dynamical state and physical properties of a threatening NEO, and laboratory investigations using gas guns to fire projectiles into asteroid regolith analog materials. The gas-gun investigations enable state-of-the-art numerical models to be verified at small scales. Computer simulations at realistic NEO scales are used to investigate how NEOs with a range of properties would respond to a pulse of energy applied in a deflection attempt. The technical work includes the development of crucial technologies, such as the autonomous guidance of a kinetic impactor to a precise point on the surface of the target, and the detailed design of realistic missions for the purpose of demonstrating the applicability and feasibility of one or more of the techniques investigated. Theoretical work on the blast deflection method of mitigation is designed to probe the circumstances in which this last line of defense may be the only viable option and the issues relating to its deployment. A global response campaign roadmap will be developed based on realistic scenarios presented, for example, by the discovery of an object such as 99942 Apophis or 2011 AG5 on a threatening orbit. The work will include considerations of the timeline of orbit knowledge and impact probability development, reconnaissance observations and fly-by or rendezvous missions, the political decision to mount a mitigation attempt, and the design, development, and launch of the mitigation mission. Collaboration with colleagues outside the NEOShield Consortium involved in complementary activities (e.g. under the auspices of the UN, NASA, or ESA) is being sought in order to establish a broad international strategy.We present a brief overview of the history and planned scope of the project, and progress made to date.The NEOShield project (http://www.neoshield.net) has received funding from the European Union Seventh Framework Program (FP7/2007-2013) under Grant Agreement no. 282703.


Sign in / Sign up

Export Citation Format

Share Document