scholarly journals Preparation of Electrospun Gelatin Mat with Incorporated Zinc Oxide/Graphene Oxide and Its Antibacterial Activity

Molecules ◽  
2020 ◽  
Vol 25 (5) ◽  
pp. 1043 ◽  
Author(s):  
Honghai Li ◽  
Yu Chen ◽  
Weipeng Lu ◽  
Yisheng Xu ◽  
Yanchuan Guo ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Graphene Oxide ◽  
Antibacterial Properties ◽  
Degradation Process ◽  
Antimicrobial Activities ◽  
Wound Dressings ◽  
X Ray ◽  
E Coli ◽  
Potential Applicability ◽  
Electrospun Gelatin

Current wound dressings have poor antimicrobial activities and are difficult to degrade. Therefore, biodegradable and antibacterial dressings are urgently needed. In this article, we used the hydrothermal method and side-by-side electrospinning technology to prepare a gelatin mat with incorporated zinc oxide/graphene oxide (ZnO/GO) nanocomposites. The resultant fibers were characterized by field emission environment scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). Results indicated that the gelatin fibers had good morphology, and ZnO/GO nanocomposites were uniformly dispersed on the fibers. The loss of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) viability were observed to more than 90% with the incorporation of ZnO/GO. The degradation process showed that the composite fibers completely degraded within 7 days and had good controllable degradation characteristics. This study demonstrated the potential applicability of ZnO/GO-gelatin mats with excellent antibacterial properties as wound dressing material.

Fabrication of cotton fabrics with durable antibacterial activities finishing by Ag nanoparticles

2018 ◽  
Vol 89 (5) ◽  
pp. 867-880 ◽  
Author(s):  
Yunping Wu ◽  
Yan Yang ◽  
Zhijie Zhang ◽  
Zhihua Wang ◽  
Yanbao Zhao ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Antibacterial Properties ◽  
Antimicrobial Activities ◽  
Cotton Fabrics ◽  
Synthesis Process ◽  
Ag Nps ◽  
X Ray ◽  
E Coli ◽  
Fabric Surface

In this paper, we propose a facile and mild route to prepare size-tunable silver nanoparticles (Ag NPs) and their finishing application on fabrication of antibacterial cotton fabrics. The as-prepared Ag NPs, with an average particles size of 2.3 nm, show the minimal inhibitory concentration of 7.8 µg/mL and the minimum bactericidal concentration of 15.6 µg/mL, respectively. In this study, sodium citrate served as a stabilizing agent to prevent Ag NP agglomeration in the synthesis process, and citric acid acted as a binder to fix Ag NPs on the cotton fabrics through chemical bonds in the finishing process. The results of Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy (UV-vis), X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy demonstrate that Ag NPs have been fixed and well dispersed on the cotton fabric surface. Ag contents in the hybrid fabrics were measured by the techniques of inductively coupled plasma atomic emission spectroscopy and UV-vis, and the antibacterial properties of hybrid fabrics were tested by the shake flask and agar diffusion plate method. It is found that the Ag NP coated cotton fabrics exhibit excellent antimicrobial activities against both the Gram-negative bacterium of Escherichia coli (E. coli) and the Gram-positive bacterium of Staphylococcus aureus ( S. aureus). The percentages of reduction bacteria remain at 91.8% and 98.7% for S. aureus and E. coli, respectively, even after 50 cycles of consecutive laundering, which indicates that the antibiotic performance of the as-fabricated hybrid fabrics is also durable.

scholarly journals Electrospun Gelatin Fibers Surface Loaded ZnO Particles as a Potential Biodegradable Antibacterial Wound Dressing

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 525 ◽  
Author(s):  
Yu Chen ◽  
Weipeng Lu ◽  
Yanchuan Guo ◽  
Yi Zhu ◽  
Yeping Song
Keyword(s):  
Antibacterial Activity ◽  
Wound Dressing ◽  
Wound Dressings ◽  
X Ray ◽  
E Coli ◽  
Particle Size Analyzer ◽  
Zno Particles ◽  
Electrospun Gelatin ◽  
Dressing Materials ◽  
Application Prospects

Traditional wound dressings require frequent replacement, are prone to bacterial growth and cause a lot of environmental pollution. Therefore, biodegradable and antibacterial dressings are eagerly desired. In this paper, gelatin/ZnO fibers were first prepared by side-by-side electrospinning for potential wound dressing materials. The morphology, composition, cytotoxicity and antibacterial activity were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (DLS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetry (TGA) and Incucyte™ Zoom system. The results show that ZnO particles are uniformly dispersed on the surface of gelatin fibers and have no cytotoxicity. In addition, the gelatin/ZnO fibers exhibit excellent antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with a significant reduction of bacteria to more than 90%. Therefore, such a biodegradable, nontoxic and antibacterial fiber has excellent application prospects in wound dressing.

Well-Aligned Graphene Oxide Nanosheets Decorated with Zinc Oxide Nanocrystals for High Performance Photocatalytic Application

2015 ◽  
Vol 14 (03) ◽  
pp. 1550007 ◽  
Author(s):  
K. Kaviyarasu ◽  
C. Maria Magdalane ◽  
E. Manikandan ◽  
M. Jayachandran ◽  
R. Ladchumananandasivam ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Graphene Oxide ◽  
High Performance ◽  
Chemical Reduction ◽  
Visible Region ◽  
Single Layer ◽  
Single Layer Graphene ◽  
Graphene Oxides ◽  
X Ray ◽  
Nanoscale Structures

Graphene oxide (GO) nanosheets modified with zinc oxide nanocrystals were achieved by a green wet-chemical approach. As-obtained products were characterized by XRD, Raman spectra, XPS, HR-TEM, EDS, PL and Photocatalytic studies. XRD studies indicate that the GO nanosheet have the same crystal structure found in hexagonal form of ZnO . The enhanced Raman spectrum of 2D bands confirmed formation of single layer graphene oxides. The gradual photocatalytic reduction of the GO nanosheet in the GO : ZnO suspension of ethanol was studied by using X-ray photoelectron (XPS) spectroscopy. The nanoscale structures were observed and confirmed using high resolution transmission electron microscopy (HR-TEM). The evolution of the elemental composition, especially the various numbers of layers were determined from energy dispersive X-ray spectra (EDS). PL properties of GO : ZnO nanosheet were found to be dependent on the growth condition and the resultant morphology revealed that GO nanosheet were highly transparent in the visible region. The photocatalytic performance of GO : ZnO nanocomposites was performed under UV irradiation. Therefore, the ZnO nanocrystals in the GO : ZnO composite could be applied in gradual chemical reduction and consequently tuning the electrical conductivity of the graphene oxide nanosheet.

Preparation and disinfection properties of graphene oxide/trichloroisocyanuric acid disinfectant

2021 ◽  
Author(s):  
li li jiang ◽  
Su Xu ◽  
Haitao Yu ◽  
Qi Cui ◽  
Rui Cao
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Minimum Inhibitory Concentration ◽  
Inhibitory Concentration ◽  
Kinetic Curve ◽  
X Ray ◽  
Bacterial Inhibition ◽  
E Coli ◽  
Blending Method ◽  
Trichloroisocyanuric Acid

Abstract In this study, graphene oxide (GO) was first prepared by the modified Hummer method. Then, the GO/trichloroisocyanuric acid (TCCA) composite was prepared by loading TCCA into GO with the blending method. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and atomic force microscopy were used to characterize the composite. The results showed that TCCA was successfully loaded on the surface of GO or intercalated among GO layers. Next, the antibacterial performance of the composite against Escherichia coli and Staphylococcus aureus was tested by the 96-well plate assay. A bactericidal kinetic curve, bacterial inhibition tests, and the mechanism of bacterial inhibition is discussed. The results showed that the minimum inhibitory concentration of the GO/TCCA composite (GO:TCCA ratio = 1:50) was 327.5 µg/mL against E. coli and 655 µg/mL against S. aureus. At the minimum inhibitory concentration, the inhibition rate of the GO/TCCA composite exceeded 99.46% against E. coli and 99.17% against S. aureus. The bactericidal kinetic curves indicate that the GO/TCCA composite has an excellent bactericidal effect against E. coli and S. aureus.

scholarly journals The Effects of Copper Addition on The Structure and Antibacterial Properties of Biomedical Glasses

2020 ◽  
Author(s):  
Leyla Mojtabavi ◽  
Amir Razavi
Keyword(s):  
Antibacterial Properties ◽  
Inhibition Zone ◽  
X Ray Diffraction ◽  
Network Modifier ◽  
X Ray ◽  
E Coli ◽  
Copper Addition ◽  
Xrd Patterns ◽  
Copper Incorporation ◽  
Glass Compositions

AbstractIn this work, we studied the effects of copper incorporation in the composition of bioactive glass. Three different glass compositions were synthesized with 0, 3, and 6 mol% of copper addition. X-Ray Diffraction (XRD) patterns confirmed that an amorphous microstructure was obtained for all three glass compositions. Results from Differential Thermal Analysis (DTA) showed that the copper addition in the glass lowers the glass transition temperature, from 646°C to 590°C when added at 6 mol%. X-ray Photoelectron (XPS) survey and high-resolution scans were performed to study the structural effects of copper addition in the glass. Results indicated that the incorporation of copper changes the ratio of bridging to non-birding oxygens in the structure. Glasses were further analyzed for their structure with Nuclear Magnetic Resonance (NMR) spectroscopy, which indicated that copper acts as a network modifier in the glass composition and copper-containing glasses show a less connected microstructure. Antibacterial efficacy of the glasses was analyzed against E. coli and S. epidermis. Copper-containing glasses showed a significantly higher inhibition zone compared to control glass. The glass with 6 mol% copper, exhibited inhibition zones of 9 and 16mm against E. coli and S. epidermis bacteria, respectively.

scholarly journals Chitosan & Conductive PANI/Chitosan Composite Nanofibers - Evaluation of Antibacterial Properties

2019 ◽  
Vol 4 (1) ◽  
pp. 6-20 ◽  
Author(s):  
Panagiota Moutsatsou ◽  
Karen Coopman ◽  
Stella Georgiadou
Keyword(s):  
Chronic Wounds ◽  
Antibacterial Properties ◽  
Wound Dressings ◽  
Bacterial Strains ◽  
Healthcare Applications ◽  
E Coli ◽  
Jet Stability ◽  
Electrospun Membranes ◽  
New Treatments ◽  
Chitosan Composite

Background: Within the healthcare industry, including the care of chronic wounds, the challenge of antimicrobial resistance continues to grow. As such, there is a need to develop new treatments that can reduce the bioburden in wounds. Objective: The present study is focused on the development of polyaniline (PANI) / chitosan (CH) nanofibrous electrospun membranes and evaluates their antibacterial properties. Methods: To this end, experimental design was used to determine the electrospinning windows of both pure chitosan and PANI/CH blends of different ratios (1:3, 3:5, 1:1). The effect of key environmental and process parameters (relative humidity and applied voltage) was determined, as well as the effect of the PANI/CH ratio in the blend and the molecular interactions between PANI and chitosan that led to jet stability. Results: The nanofibrous mats were evaluated regarding their morphology and antibacterial effect against model gram positive and gram negative bacterial strains, namely B. subtilis and E. coli. High PANI content mats show increased bactericidal activity against both bacterial strains. Conclusion: The blend fibre membranes combine the materials’ respective properties, namely electrical conductivity, biocompatibility and antibacterial activity. This study suggests that electrospun PANI/CH membranes are promising candidates for healthcare applications, such as wound dressings.

scholarly journals Antibacterial Property of Composites of Reduced Graphene Oxide with Nano-Silver and Zinc Oxide Nanoparticles Synthesized Using a Microwave-Assisted Approach

2019 ◽  
Vol 20 (21) ◽  
pp. 5394 ◽  
Author(s):  
Yi-Huang Hsueh ◽  
Chien-Te Hsieh ◽  
Shu-Ting Chiu ◽  
Ping-Han Tsai ◽  
Chia-Ying Liu ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Antibacterial Activity ◽  
Graphene Oxide ◽  
Reductase Activity ◽  
Chemical Reduction ◽  
Membrane Integrity ◽  
Zno Nps ◽  
Nano Silver ◽  
E Coli ◽  
Microwave Assisted

Graphene oxide (GO) composites with various metal nanoparticles (NPs) are attracting increasing interest owing to their broad scope in biomedical applications. Here, microwave-assisted chemical reduction was used to deposit nano-silver and zinc oxide NPs (Ag and ZnO NPs) on the surface of reduced GO (rGO) at the following weight percentages: 5.34% Ag/rGO, 7.49% Ag/rGO, 6.85% ZnO/rGO, 16.45% ZnO/rGO, 3.47/34.91% Ag/ZnO/rGO, and 7.08/15.28% Ag/ZnO/rGO. These materials were tested for antibacterial activity, and 3.47/34.91% Ag/ZnO/rGO and 7.08/15.28% Ag/ZnO/rGO exhibited better antibacterial activity than the other tested materials against the gram-negative bacterium Escherichia coli K12. At 1000 ppm, both these Ag/ZnO/rGO composites had better killing properties against both E. coli K12 and the gram-positive bacterium Staphylococcus aureus SA113 than Ag/rGO and ZnO/rGO did. RedoxSensor flow cytometry showed that 3.47/34.91% Ag/ZnO/rGO and 7.08/15.28% Ag/ZnO/rGO decreased reductase activity and affected membrane integrity in the bacteria. At 100 ppm, these two composites affected membrane integrity more in E. coli, while 7.08/15.28% Ag/ZnO/rGO considerably decreased reductase activity in S. aureus. Thus, the 3.47/34.91% and 7.08%/15.28% Ag/ZnO/rGO nanocomposites can be applied not only as antibacterial agents but also in a variety of biomedical materials such as sensors, photothermal therapy, drug delivery, and catalysis, in the future.

scholarly journals An N-Halamine/Graphene Oxide-Functionalized Electrospun Polymer Membrane That Inactivates Bacteria on Contact and by Releasing Active Chlorine

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2784
Author(s):  
Shi Lan ◽  
Jinghua Zhang ◽  
Jie Li ◽  
Yanan Guo ◽  
Xianliang Sheng ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Antibacterial Properties ◽  
Polymer Membrane ◽  
Water Disinfection ◽  
Fibrous Membrane ◽  
Active Chlorine ◽  
Public Health Issue ◽  
Emerging Pathogens ◽  
Electrospinning Technique ◽  
E Coli

The emergence of antibiotic-resistant “superbugs” in recent decades has led to widespread illness and death and is a major ongoing public health issue. Since traditional antimicrobials and antibiotics are in many cases showing limited or no effectiveness in fighting some emerging pathogens, there is an urgent need to develop and explore novel antibacterial agents that are both powerful and reliable. Combining two or more antibiotics or antimicrobials has become a hot topic in antibacterial research. In this contribution, we report on using a simple electrospinning technique to create an N-halamine/graphene oxide-modified polymer membrane with excellent antibacterial activity. With the assistance of advanced techniques, the as-obtained membrane was characterized in terms of its chemical composition, morphology, size, and the presence of active chlorine. Its antibacterial properties were tested with Escherichia coli (E. coli) as the model bacteria, using the colony-counting method. Interestingly, the final N-halamine/graphene oxide-based antibacterial fibrous membrane inactivated E. coli both on contact and by releasing active chlorine. We believe that the synergistic antimicrobial action of our as-fabricated fibrous membrane should have great potential for utilization in water disinfection, air purification, medical and healthcare products, textile products, and other antibacterial-associated fields.

scholarly journals Comparative Study of Physicochemical and Antibacterial Properties of ZnO Nanoparticles Prepared by Laser Ablation of Zn Target in Water and Air

2018 ◽  
Author(s):  
Ekaterina A. Gavrilenko ◽  
Daria A. Goncharova ◽  
Ivan N. Lapin ◽  
Anna L. Nemoikina ◽  
Valery A. Svetlichnyi ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Zno Nanoparticles ◽  
Biomedical Applications ◽  
Antibacterial Properties ◽  
Pulsed Laser ◽  
Wound Dressings ◽  
E Coli ◽  
Nanosecond Pulsed Laser ◽  
Bactericidal Properties ◽  
Biodegradable Poly

Here, we report on ZnO nanoparticles (NPs) generated by nanosecond pulsed laser (Nd:YAG, 1064 nm) through ablation of metallic Zn target in water and air and their comparative analysis as potential nanomaterials for biomedical applications. The prepared nanomaterials were carefully characterized in terms of their structure, composition, morphology and defects. It was found that in addition to the main wurtzite ZnO phase, which is conventionally prepared and reported by others, the sample laser-generated in air also contained some amount of monoclinic zinc hydroxynitrate. Both nanomaterials were then used to modify model wound dressings based on biodegradable poly-L-lactic acid. The as-prepared model dressings were tested as biomedical materials with bactericidal properties towards S. aureus and E. coli strains. The advantages of the NPs prepared in air over their counterparts generated in water found in this work are discussed.   

scholarly journals Unravelling the Role of Synthesis Conditions on the Structure of Zinc Oxide-Reduced Graphene Oxide Nanofillers

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2149 ◽  
Author(s):  
Zélia Alves ◽  
Cláudia Nunes ◽  
Paula Ferreira
Keyword(s):  
Zinc Oxide ◽  
Graphene Oxide ◽  
Zinc Acetate ◽  
Zinc Acetate Dihydrate ◽  
Average Particle Size ◽  
Antimicrobial Activities ◽  
Average Particle ◽  
Zno Nanostructures ◽  
Synthesis Conditions

The diversity of zinc oxide (ZnO) particles and derived composites applications is highly dependent on their structure, size, morphology, defect amounts, and/or presence of dopant molecules. In this work, ZnO nanostructures are grown in situ on graphene oxide (GO) sheets by an easily implementable solvothermal method with simultaneous reduction of GO. The effect of two zinc precursors (zinc acetate (ZA) and zinc acetate dihydrate (ZAD)), NaOH concentration (0.5, 1 or 2 M), and concentration (1 and 12.5 mg/mL) and pH (pH = 1, 4, 8, and 12) of GO suspension were evaluated. While the ZnO particle morphology shows to be precursor dependent, the average particle size length decreases with lower NaOH concentration, as well as with the addition of a higher basicity and concentration of GO suspension. A lowered band gap and a higher specific surface area are obtained from the ZnO composites with higher amounts of GO suspension. Otherwise, the low concentration and the higher pH of GO suspension induce more lattice defects on the ZnO crystal structure. The role of the different condition parameters on the ZnO nanostructures and their interaction with graphene sheets was observed to tune the ZnO–rGO nanofiller properties for photocatalytic and antimicrobial activities.

Sign in / Sign up

Export Citation Format

Share Document