scholarly journals Titania Nanofluids Based on Natural Ester: Cooling and Insulation Properties Assessment

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 603 ◽  
Author(s):  
Cristian Olmo ◽  
Cristina Méndez ◽  
Félix Ortiz ◽  
Fernando Delgado ◽  
Alfredo Ortiz
Keyword(s):  
Thermal Conductivity ◽  
Breakdown Voltage ◽  
Base Fluid ◽  
Thermal Characterization ◽  
Experimental Setup ◽  
Buoyancy Forces ◽  
And Behavior ◽  
Natural Ester

The assessment of a TiO2 vegetal-based dielectric nanofluid has been carried out, and its characteristics and behavior have been tested and compared with a previously tested maghemite nanofluid. The results obtained reflect a similar affectation of the main properties, with a maximal improvement of the breakdown voltage of 33% at 0.5 kg/m3, keeping the thermal conductivity and the viscosity almost constant, especially the first one. This thermal characterization agrees with the results obtained when applying the TiO2 optimal nanofluid in the cooling of an experimental setup, with a slightly worse performance than the base fluid. Nevertheless, this performance is the opposite to that noticed with the ferrofluid, which was capable of improving the cooling of the transformer and decreasing its temperature. The similarities between the characterizations of both nanofluids, the differences in their cooling performances and their different magnetic natures seem to point out the presence of additional thermomagnetic buoyancy forces to support the improvement of the cooling.

Evaluation of the Temperature Oscillation Technique to Calculate Thermal Conductivity of Water and Systematic Measurement of the Thermal Conductivity of Aluminum Oxide – Water Nanofluid

2004 ◽  
Author(s):  
P. Bhattacharya ◽  
S. Nara ◽  
P. Vijayan ◽  
T. Tang ◽  
W. Lai ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Aluminum Oxide ◽  
Effective Thermal Conductivity ◽  
Base Fluid ◽  
Suspended Solid ◽  
Temperature Oscillation ◽  
Solid Particles ◽  
Systematic Measurement ◽  
Experimental Setup ◽  
Suspended Solid Particles

A nanofluid is a fluid containing suspended solid particles, with sizes of the order of nanometers. The nanofluids are better conductors of heat than the base fluid itself. Therefore it is of interest to measure the effective thermal conductivity of such a nanofluid. We use temperature oscillation technique to measure the thermal conductivity of the nanofluid. However, first we evaluate the temperature oscillation technique as a tool to measure thermal conductivity of water. Then we validate our experimental setup by measuring the thermal conductivity of the aluminum oxide-water nanofluid and comparing our results with previously published work. Finally, we do a systematic series of measurements of the thermal conductivities of aluminum oxide-water nanofluids at various temperatures and explain the reasons behind the dependence of the enhancement in thermal conductivity of the nanofluid on temperature.

Microstructural and Thermal Characterization of Diamond Nanofluids

2018 ◽  
Author(s):  
Farzin Mashali ◽  
Ethan M. Languri ◽  
Gholamreza Mirshekari ◽  
Jim Davidson ◽  
David Kerns
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Particle Size ◽  
Base Fluid ◽  
Average Particle Size ◽  
Thermal Characterization ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Heat Transfer Fluids ◽  
Transmission Electron

Conventional heat transfer fluids such as water, ethylene glycol, and mineral oil, that are used widely in industry suffer from low thermal conductivity. On the other hand, diamond has shown exceptional thermal properties with a thermal conductivity higher than five times of copper and about zero electrical conductivity. To investigate the effectiveness of nanodiamond particles in traditional heat transfer fluids, we study deaggregated ultra-dispersed diamonds (UDD) using X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM). Furthermore, nanodiamond nanofluids were prepared at different concentrations in deionized (DI) water as the base fluid. Particle size distribution was investigated using TEM and the average particle size have been reported around 6 nm. The thermal conductivity of nanofluids was measured at different concentrations and temperatures. The results indicate up to 15% enhancement in thermal conductivity compared with the base fluid and thermal conductivity increases with temperature and particle loading. The viscosity raise in the samples have been negligible.

An Experimental Investigation on Thermal Conductivity and Viscosity of Graphene doped CNTs /TiO2 Nanofluid

2020 ◽  
Vol 17 (3) ◽  
Author(s):  
A.M. Zetty Akhtar ◽  
M.M. Rahman ◽  
K. Kadirgama ◽  
M.A. Maleque
Keyword(s):  
Thermal Conductivity ◽  
Zeta Potential ◽  
Base Fluid ◽  
Minimum Quantity Lubrication ◽  
Cutting Fluid ◽  
Cutting Zone ◽  
Observation Method ◽  
The Stability ◽  
The Relationship ◽  
Zeta Potential Analysis

This paper presents the findings of the stability, thermal conductivity and viscosity of CNTs (doped with 10 wt% graphene)- TiO2 hybrid nanofluids under various concentrations. While the usage of cutting fluid in machining operation is necessary for removing the heat generated at the cutting zone, the excessive use of it could lead to environmental and health issue to the operators. Therefore, the minimum quantity lubrication (MQL) to replace the conventional flooding was introduced. The MQL method minimises the usage of cutting fluid as a step to achieve a cleaner environment and sustainable machining. However, the low thermal conductivity of the base fluid in the MQL system caused the insufficient removal of heat generated in the cutting zone. Addition of nanoparticles to the base fluid was then introduced to enhance the performance of cutting fluids. The ethylene glycol used as the base fluid, titanium dioxide (TiO2) and carbon nanotubes (CNTs) nanoparticle mixed to produce nanofluids with concentrations of 0.02 to 0.1 wt.% with an interval of 0.02 wt%. The mixing ratio of TiO2: CNTs was 90:10 and ratio of SDBS (surfactant): CNTs was 10:1. The stability of nanofluid checked using observation method and zeta potential analysis. The thermal conductivity and viscosity of suspension were measured at a temperature range between 30˚C to 70˚C (with increment of 10˚C) to determine the relationship between concentration and temperature on nanofluid’s thermal physical properties. Based on the results obtained, zeta potential value for nanofluid range from -50 to -70 mV indicates a good stability of the suspension. Thermal conductivity of nanofluid increases as an increase of temperature and enhancement ratio is within the range of 1.51 to 4.53 compared to the base fluid. Meanwhile, the viscosity of nanofluid shows decrements with an increase of the temperature remarks significant advantage in pumping power. The developed nanofluid in this study found to be stable with enhanced thermal conductivity and decrease in viscosity, which at once make it possible to be use as nanolubricant in machining operation.

scholarly journals Effects of Plasma Treated Alumina Nanoparticles on Breakdown Strength, Partial Discharge Resistance, and Thermophysical Properties of Mineral Oil-Based Nanofluids

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3610
Author(s):  
Norhafezaidi Mat Saman ◽  
Izzah Hazirah Zakaria ◽  
Mohd Hafizi Ahmad ◽  
Zulkurnain Abdul-Malek
Keyword(s):  
Thermal Conductivity ◽  
Plasma Treatment ◽  
Base Fluid ◽  
Breakdown Strength ◽  
Partial Discharge ◽  
Mineral Oil ◽  
Transformer Oil ◽  
Alumina Nanoparticles ◽  
Discharge Characteristics ◽  
Nano Alumina

Mineral oil has been chosen as an insulating liquid in power transformers due to its superior characteristics, such as being an effective insulation medium and a great cooling agent. Meanwhile, the performance of mineral oil as an insulation liquid can be further enhanced by dispersing nanoparticles into the mineral oil, and this composition is called nanofluids. However, the incorporation of nanoparticles into the mineral oil conventionally causes the nanoparticles to agglomerate and settle as sediment in the base fluid, thereby limiting the improvement of the insulation properties. In addition, limited studies have been reported for the transformer oil as a base fluid using Aluminum Oxide (Al2O3) as nanoparticles. Hence, this paper reported an experimental study to investigate the significant role of cold plasma treatment in modifying and treating the surface of nano-alumina to obtain a better interaction between the nano-alumina and the base fluid, consequently improving the insulation characteristics such as breakdown voltage, partial discharge characteristics, thermal conductivity, and viscosity of the nanofluids. The plasma treatment process was conducted on the surface of nano-alumina under atmospheric pressure plasma by using the dielectric barrier discharge concept. The breakdown strength and partial discharge characteristics of the nanofluids were measured according to IEC 60156 and IEC 60270 standards, respectively. In contrast, the viscosity and thermal conductivity of the nanofluids were determined using Brookfield DV-II + Pro Automated viscometer and Decagon KD2-Pro conductivity meter, respectively. The results indicate that the 0.1 wt% of plasma-treated alumina nanofluids has shown the most comprehensive improvements in electrical properties, dispersion stability, and thermal properties. Therefore, the plasma treatment has improved the nanoparticles dispersion and stability in nanofluids by providing stronger interactions between the mineral oil and the nanoparticles.

scholarly journals A Novel Gate Drive Circuit for Suppressing Turn-on Oscillation of Non-Kelvin Packaged SiC MOSFET

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2449
Author(s):  
Hongyan Zhao ◽  
Jiangui Chen ◽  
Yan Li ◽  
Fei Lin
Keyword(s):  
Thermal Conductivity ◽  
Breakdown Voltage ◽  
Basic Principle ◽  
Double Pulse ◽  
Experimental Results ◽  
Switching Frequency ◽  
Turn On ◽  
Proof Testing ◽  
Gate Driver ◽  
Drive Circuit

Compared with a silicon MOSFET device, the SiC MOSFET has many benefits, such as higher breakdown voltage, faster action speed and better thermal conductivity. These advantages enable the SiC MOSFET to operate at higher switching frequencies, while, as the switching frequency increases, the turn-on loss accounts for most of the loss. This characteristic severely limits the applications of the SiC MOSFET at higher switching frequencies. Accordingly, an SRD-type drive circuit for a SiC MOSFET is proposed in this paper. The proposed SRD-type drive circuit can suppress the turn-on oscillation of a non-Kelvin packaged SiC MOSFET to ensure that the SiC MOSFET can work at a faster turn-on speed with a lower turn-on loss. In this paper, the basic principle of the proposed SRD-type drive circuit is analyzed, and a double pulse platform is established. For the purpose of proof-testing the performance of the presented SRD-type drive circuit, comparisons and experimental verifications between the traditional gate driver and the proposed SRD-type drive circuit were conducted. Our experimental results finally demonstrate the feasibility and effectiveness of the proposed SRD-type drive circuit.

Study of the boundary layer heat transfer of nanofluids over a stretching sheet: Passive control of nanoparticles at the surface

2015 ◽  
Vol 93 (7) ◽  
pp. 725-733 ◽  
Author(s):  
M. Ghalambaz ◽  
E. Izadpanahi ◽  
A. Noghrehabadi ◽  
A. Chamkha
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Heat Transfer Enhancement ◽  
Base Fluid ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Enhancement Ratio ◽  
Transfer Enhancement

The boundary layer heat and mass transfer of nanofluids over an isothermal stretching sheet is analyzed using a drift-flux model. The relative slip velocity between the nanoparticles and the base fluid is taken into account. The nanoparticles’ volume fractions at the surface of the sheet are considered to be adjusted passively. The thermal conductivity and the dynamic viscosity of the nanofluid are considered as functions of the local volume fraction of the nanoparticles. A non-dimensional parameter, heat transfer enhancement ratio, is introduced, which shows the alteration of the thermal convective coefficient of the nanofluid compared to the base fluid. The governing partial differential equations are reduced into a set of nonlinear ordinary differential equations using appropriate similarity transformations and then solved numerically using the fourth-order Runge–Kutta and Newton–Raphson methods along with the shooting technique. The effects of six non-dimensional parameters, namely, the Prandtl number of the base fluid Prbf, Lewis number Le, Brownian motion parameter Nb, thermophoresis parameter Nt, variable thermal conductivity parameter Nc and the variable viscosity parameter Nv, on the velocity, temperature, and concentration profiles as well as the reduced Nusselt number and the enhancement ratio are investigated. Finally, case studies for Al2O3 and Cu nanoparticles dispersed in water are performed. It is found that increases in the ambient values of the nanoparticles volume fraction cause decreases in both the dimensionless shear stress f″(0) and the reduced Nusselt number Nur. Furthermore, an augmentation of the ambient value of the volume fraction of nanoparticles results in an increase the heat transfer enhancement ratio hnf/hbf. Therefore, using nanoparticles produces heat transfer enhancement from the sheet.

A Study of Oxide Etch Angle of Edge Termination Field Plate for Fabrication of SiC SBD

2017 ◽  
Vol 730 ◽  
pp. 102-105
Author(s):  
Ey Goo Kang
Keyword(s):  
Thermal Conductivity ◽  
Silicon Carbide ◽  
Breakdown Voltage ◽  
Dielectric Breakdown ◽  
Power Semiconductor ◽  
Field Plate ◽  
Edge Termination ◽  
Power Semiconductor Devices ◽  
Silicon Materials ◽  
Generation Power

The silicon carbide (SiC) material is being spotlighted as a next-generation power semiconductor material due to the characteristic limitations of the existing silicon materials. SiC has a wider band gap, higher breakdown voltage, higher thermal conductivity, and higher saturation electron mobility than Si. However, actual SiC SBDs exhibit a lower dielectric breakdown voltage than the theoretical breakdown voltage that causes the electric field concentration, a phenomenon that occurs on the edge of the contact surface as in the conventional power semiconductor devices. In this paper, we designed an edge termination structure using a field plate structure through oxide etch angle control, and optimized the structure to obtain a high breakdown voltage. The experiment results indicated that oxide etch angle was 45° when the breakdown voltage characteristics of the SiC SBD were optimized and a breakdown voltage of 681V was obtained.

Sign in / Sign up

Export Citation Format

Share Document