scholarly journals Highly Luminescent Copper Nanoclusters Stabilized by Ascorbic Acid for the Quantitative Detection of 4-Aminoazobenzene

Nanomaterials ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1531
Author(s):  
Qiang Li ◽  
Yunhao Li ◽  
Heguo Li ◽  
Xiaoshan Yan ◽  
Guolin Han ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Water Soluble ◽  
Quantitative Detection ◽  
Metal Nanoclusters ◽  
Green Fluorescence ◽  
Copper Nanoclusters ◽  
Time Saving ◽  
Good Potential ◽  
Ion Stability ◽  
High Fluorescence

As one of the widely studied metal nanoclusters, the preparation of copper nanoclusters (Cu NCs) by a facile method with high fluorescence performance has been the interest of researchers. In this paper, a simple, green, clean, and time-saving chemical etching method was used to synthesize water-soluble Cu NCs using ascorbic acid (AA) as the reducing agent. The as-prepared Cu NCs showed strong green fluorescence (with a quantum yield as high as 33.6%) and high ion stability, and good antioxidant activity as well. The resultant Cu NCs were used for the detection of 4-aminoazobenzene (one of 24 kinds of prohibited textile compounds) in water with a minimum detection limit of 1.44 μM, which has good potential for fabric safety monitoring.

scholarly journals Lysozyme coated copper nanoclusters for green fluorescence and their utility in cell imaging

2020 ◽  
Vol 1 (5) ◽  
pp. 1439-1447
Author(s):  
Atul Gajanan Thawari ◽  
Piyush Kumar ◽  
Rohit Srivastava ◽  
Chebrolu Pulla Rao
Keyword(s):  
Green Fluorescent Protein ◽  
Cell Lines ◽  
Cancer Cell ◽  
Cell Imaging ◽  
Fluorescent Protein ◽  
Water Soluble ◽  
Green Fluorescence ◽  
Copper Nanoclusters ◽  
Ph Dependent ◽  
Green Fluorescent

Green fluorescent, pH dependent and water soluble copper nanoclusters (3–5 nm) were synthesized by stabilizing with lysozyme and these were demonstrated for imaging in both healthy and cancer cell lines as an alternate to green fluorescent protein.

scholarly journals Protein-Templated Copper Nanoclusters: Versatile Platform for Label-Free Detection of Albumin

Proceedings ◽  
2020 ◽  
Vol 60 (1) ◽  
pp. 55
Author(s):  
Mariagrazia Lettieri ◽  
Pasquale Palladino ◽  
Simona Scarano ◽  
Maria Minunni
Keyword(s):  
Human Serum Albumin ◽  
Serum Albumin ◽  
Human Serum ◽  
Accurate Determination ◽  
Quantitative Detection ◽  
Metal Nanoclusters ◽  
Copper Nanoclusters ◽  
Wide Range ◽  
Label Free Detection

The outstanding properties of metal nanoclusters, stabilized with different scaffolds, i.e., proteins, nucleic acids, polymers and dendrimers, enable their application in a wide range of fields. The recent advances in the fabrication and synthesis of nanoclusters have revolutionized the design of biosensors, leading to significant improvements in the selective and sensitive determination of several targets. In particular, in recent years, copper nanoclusters (CuNCs) have attracted more attention mainly for their unique fluorescent properties, as well as their large Stokes shifts, low toxicity, and high biocompatibility. The high-photoluminescent features of CuNCs facilitate highly sensitive target detection even in complex biological matrices. For these reasons, in this work, we exploited the specific template-targeted CuNCs’ growth for the sensitive and accurate determination of human serum albumin (HSA) in urine and human serum. HSA is the most abundant protein in plasma, acting as a carrier for many key biological molecules such as hormones, fatty acids and steroids, and it contributes to the maintenance of the oncotic blood pressure. The concentration of HSA in body fluids greatly influences the state of health of the patients. Taking into account these considerations, the quantitative detection of human serum albumin plays a key role in the early diagnosis of serious pathological conditions such as albuminuria and albuminemia. Here, we present a CuNCs-based assay in which copper nanoclusters were used as fluorescent signal indicators to detect serum albumin in a complex biological matrix.

Sorbitol enhances the physicochemical stability of B12 vitamers

2020 ◽  
Vol 90 (5-6) ◽  
pp. 439-447 ◽  
Author(s):  
Andrew Hadinata Lie ◽  
Maria V Chandra-Hioe ◽  
Jayashree Arcot
Keyword(s):  
Ascorbic Acid ◽  
Uv Light ◽  
Heat Exposure ◽  
Water Soluble ◽  
Uv Exposure ◽  
Physicochemical Stability ◽  
Before And After ◽  
The Stability

Abstract. The stability of B12 vitamers is affected by interaction with other water-soluble vitamins, UV light, heat, and pH. This study compared the degradation losses in cyanocobalamin, hydroxocobalamin and methylcobalamin due to the physicochemical exposure before and after the addition of sorbitol. The degradation losses of cyanocobalamin in the presence of increasing concentrations of thiamin and niacin ranged between 6%-13% and added sorbitol significantly prevented the loss of cyanocobalamin (p<0.05). Hydroxocobalamin and methylcobalamin exhibited degradation losses ranging from 24%–26% and 48%–76%, respectively; added sorbitol significantly minimised the loss to 10% and 20%, respectively (p < 0.05). Methylcobalamin was the most susceptible to degradation when co-existing with ascorbic acid, followed by hydroxocobalamin and cyanocobalamin. The presence of ascorbic acid caused the greatest degradation loss in methylcobalamin (70%-76%), which was minimised to 16% with added sorbitol (p < 0.05). Heat exposure (100 °C, 60 minutes) caused a greater loss of cyanocobalamin (38%) than UV exposure (4%). However, degradation losses in hydroxocobalamin and methylcobalamin due to UV and heat exposures were comparable (>30%). At pH 3, methylcobalamin was the most unstable showing 79% degradation loss, which was down to 12% after sorbitol was added (p < 0.05). The losses of cyanocobalamin at pH 3 and pH 9 (~15%) were prevented by adding sorbitol. Addition of sorbitol to hydroxocobalamin at pH 3 and pH 9 reduced the loss by only 6%. The results showed that cyanocobalamin was the most stable, followed by hydroxocobalamin and methylcobalamin. Added sorbitol was sufficient to significantly enhance the stability of cobalamins against degradative agents and conditions.

Ascorbic Acid does not Improve Endothelium-Dependent Flow-mediated Dilatation of the Brachial Artery in Patients with Raynaud’s Phenomenon Secondary to Systemic Sclerosis

2003 ◽  
Vol 73 (1) ◽  
pp. 3-7 ◽  
Author(s):  
M. E. Mavrikakis ◽  
J. P. Lekakis ◽  
M. Papamichael ◽  
K. S. Stamatelopoulos ◽  
Ch. C. Kostopoulos ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Smooth Muscle ◽  
Systemic Sclerosis ◽  
Endothelial Dysfunction ◽  
Brachial Artery ◽  
Raynaud’S Phenomenon ◽  
Raynaud's Phenomenon ◽  
Water Soluble ◽  
Placebo Administration ◽  
Flow Mediated Dilatation

Previous studies have shown that patients with Raynaud’s phenomenon secondary to systemic sclerosis present abnormal endothelial function; the mechanisms responsible for the endothelial dysfunction are unknown but increased vascular oxidative stress could be a possible cause. The hypothesis that a potent water-soluble antioxidant can reverse endothelial dysfunction in these patients was tested in the present study. We examined 11 female patients with Raynaud’s phenomenon secondary to systemic sclerosis and ten healthy control women by ultrasound imaging of the brachial artery to assess flow-mediated (endothelium-dependent) and nitrate-induced (endothelium-independent) vasodilatation. Flow-mediated dilatation and nitrate-induced dilatation were significantly reduced in patients with Raynaud’s phenomenon, indicating abnormal endothelial and smooth muscle cell function. Patients with Raynaud’s phenomenon entered a double-blind, randomized, crossover placebo-controlled trial and received orally 2 g of ascorbic acid or placebo; vascular studies were repeated two hours after ascorbic acid or placebo administration. Flow-mediated dilatation did not improve after ascorbic acid (1.6 ± 2.2% to 2.2 ± 2.5%, ns) or placebo administration (1.2 ± 1,9% to 1.7 ± 1.4%, ns); also nitrate-induced dilatation was similar after ascorbic acid or placebo (16 ± 7.4% vs 17 ± 8%, ns), suggesting no effect of ascorbic acid on endothelial and vascular smooth muscle function. In conclusion, ascorbic acid does not reverse endothelial vasomotor dysfunction in the brachial circulation of patients with Raynaud’s phenomenon secondary to systemic sclerosis. The use of different antioxidants or different dosing of ascorbic acid may be required to show a beneficial effect on endothelial vasodilator function.

Molecularly Imprinted Sensor for Ascorbic Acid Based on Gold Nanoparticles and Multiwalled Carbon Nanotubes

2020 ◽  
Vol 16 (7) ◽  
pp. 905-913
Author(s):  
Youyuan Peng ◽  
Qingshan Miao
Keyword(s):  
Carbon Nanotubes ◽  
Gold Nanoparticles ◽  
Ascorbic Acid ◽  
Multiwalled Carbon Nanotubes ◽  
Ph Value ◽  
Biological Fluids ◽  
Water Soluble ◽  
Multiwalled Carbon ◽  
Experimental Conditions ◽  
Molecularly Imprinted

Background: L-Ascorbic acid (AA) is a kind of water soluble vitamin, which is mainly present in fruits, vegetables and biological fluids. As a low cost antioxidant and effective scavenger of free radicals, AA may help to prevent diseases such as cancer and Parkinson’s disease. Owing to its role in the biological metabolism, AA has also been utilized for the therapy of mental illness, common cold and for improving the immunity. Therefore, it is very necessary and urgent to develop a simple, rapid and selective strategy for the detection of AA in various samples. Methods: The molecularly imprinted poly(o-phenylenediamine) (PoPD) film was prepared for the analysis of L-ascorbic acid (AA) on gold nanoparticles (AuNPs) - multiwalled carbon nanotubes (MWCNTs) modified glass carbon electrode (GCE) by electropolymerization of o-phenylenediamine (oPD) and AA. Experimental parameters including pH value of running buffer and scan rates were optimized. Scanning electron microscope (SEM), fourier-transform infrared (FTIR) spectra, cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were utilized for the characterization of the imprinted polymer film. Results: Under the selected experimental conditions, the DPV peak currents of AA exhibit two distinct linear responses ranging from 0.01 to 2 μmol L-1 and 2 to 100 μmol L-1 towards the concentrations of AA, and the detection limit was 2 nmol L-1 (S/N=3). Conclusion: The proposed electrochemical sensor possesses excellent selectivity for AA, along with good reproducibility and stability. The results obtained from the analysis of AA in real samples demonstrated the applicability of the proposed sensor to practical analysis.

scholarly journals Synthesis of Fluorescent Carbon Dots and Their Application in Ascorbic Acid Detection

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1246
Author(s):  
Tengfei Wang ◽  
Hui Luo ◽  
Xu Jing ◽  
Jiali Yang ◽  
Meijun Huo ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Fluorescence Intensity ◽  
Carbon Dots ◽  
Ph Dependence ◽  
Scale Up ◽  
Water Soluble ◽  
Jujube Fruit ◽  
Fluorescent Carbon Dots ◽  
Fluorescent Carbon

Water-soluble fluorescent carbon dots (CDs) were synthesized by a hydrothermal method using citric acid as the carbon source and ethylenediamine as the nitrogen source. The repeated and scale-up synthetic experiments were carried out to explore the feasibility of macroscopic preparation of CDs. The CDs/Fe3+ composite was prepared by the interaction of the CDs solution and Fe3+ solution. The optical properties, pH dependence and stability behavior of CDs or the CDs/Fe3+ composite were studied by ultraviolet spectroscopy and fluorescence spectroscopy. Following the principles of fluorescence quenching after the addition of Fe3+ and then the fluorescence recovery after the addition of asorbic acid, the fluorescence intensity of the carbon dots was measured at λex = 360 nm, λem = 460 nm. The content of ascorbic acid was calculated by quantitative analysis of the changing fluorescence intensity. The CDs/Fe3+ composite was applied to the determination of different active molecules, and it was found that the composite had specific recognition of ascorbic acid and showed an excellent linear relationship in 5.0–350.0 μmol·L−1. Moreover, the detection limit was 3.11 μmol·L−1. Satisfactory results were achieved when the method was applied to the ascorbic acid determination in jujube fruit. The fluorescent carbon dots composites prepared in this study may have broad application prospects in a rapid, sensitive and trace determination of ascorbic acid content during food processing.

Specific and Quantitative Detection of Albumin in Biological Fluids by Tetrazolate-Functionalized Water-Soluble AIEgens

2019 ◽  
Vol 11 (33) ◽  
pp. 29619-29629 ◽  
Author(s):  
Yujie Tu ◽  
Yeqing Yu ◽  
Zhibiao Zhou ◽  
Sheng Xie ◽  
Bicheng Yao ◽  
...  
Keyword(s):  
Biological Fluids ◽  
Water Soluble ◽  
Quantitative Detection

scholarly journals Iodometric Quantitative Analysis Method of Ascorbic Acid in Tablets

2019 ◽  
Vol 70 (10) ◽  
pp. 3555-3560
Author(s):  
Costinela Valerica Georgescu ◽  
Cristian Catalin Gavat ◽  
Doina Carina Voinescu
Keyword(s):  
Ascorbic Acid ◽  
Quantitative Analysis ◽  
Standard Deviation ◽  
Statistical Significance ◽  
The Body ◽  
Water Soluble ◽  
International Standards ◽  
Titration Method ◽  
Normal Limits ◽  
Relative Standard

Ascorbic acid is a water-soluble vitamin provided with strong antioxidant action, that fulfills an important immune protective role of the body against infections and prevents various cancers appearance. The main goal of this study was to exactly quantify pure ascorbic acid in tablets of two pharmaceuticals. Proposed objective consisted in improvement and application of a iodometric titration method in ascorbic acid quantitative analysis. Ascorbic acid content per tablet in both studied pharmaceuticals was 173.84 mg, very close to official stated amount of active substance (180 mg). Allowed percentage deviation from declared content of pure ascorbic acid was only 3.42 %, below maximum value of � 5 % imposed by Romanian Pharmacopoeia 10-th Edition, according to European and International standards. Statistical analysis confirmed experimental obtained results and revealed low Standard Error value SE = 0.214476, which has fallen within normal limits. Confidence Level value (95.0 %) = 0.551328 and Standard Deviation SD = 0.525357. were within normal range of values. Relative Standard Deviation (Coefficient of variation or homogeneity) RSD = 26.268% was found below maximum range of accepted values (30-35%). P value = 7.44. 10-6 was located within normal limits, P [ 0.001, so the experimental obtained results has shown highest statistical significance. Thus, studied titration method can be successfully used in quantitative analysis of ascorbic acid from different samples.

Sign in / Sign up

Export Citation Format

Share Document