scholarly journals A Solvothermal Synthesis of TiO2 Nanoparticles in a Non-Polar Medium to Prepare Highly Stable Nanofluids with Improved Thermal Properties

Nanomaterials ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 816 ◽  
Author(s):  
Teresa Aguilar ◽  
Ivan Carrillo-Berdugo ◽  
Roberto Gómez-Villarejo ◽  
Juan Gallardo ◽  
Paloma Martínez-Merino ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Properties ◽  
Tio2 Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
High Stability ◽  
Chemical Properties ◽  
Heat Transfer Fluid ◽  
Promising Alternative ◽  
X Ray ◽  
Vis Spectroscopy

Nanofluids are systems with several interesting heat transfer applications, but it can be a challenge to obtain highly stable suspensions. One way to overcome this challenge is to create the appropriate conditions to disperse the nanomaterial in the fluid. However, when the heat transfer fluid used is a non-polar organic oil, there are complications due to the low polarity of this solvent. Therefore, this study introduces a method to synthesize TiO2 nanoparticles inside a non-polar fluid typically used in heat transfer applications. Nanoparticles produced were characterized for their structural and chemical properties using techniques such as X-ray Diffraction (XRD), Raman spectroscopy, Transmission Electron Microscopy (TEM), Fourier Transform Infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The nanofluid showed a high stability, which was analyzed by means of UV-vis spectroscopy and by measuring its particle size and ζ potential. So, this nanofluid will have many possible applications. In this work, the use as heat transfer fluid was tested. In this sense, nanofluid also presented enhanced isobaric specific heat and thermal conductivity values with regard to the base fluid, which led to the heat transfer coefficient increasing by 14.4%. Thus, the nanofluid prepared could be a promising alternative to typical HTFs thanks to its improved thermal properties and high stability resulting from the synthesis procedure.

scholarly journals Application of Reverse Micelle Sol–Gel Synthesis for Bulk Doping and Heteroatoms Surface Enrichment in Mo-Doped TiO2 Nanoparticles

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 937 ◽  
Author(s):  
Roberto Nasi ◽  
Serena Esposito ◽  
Francesca Freyria ◽  
Marco Armandi ◽  
Tanveer Gadhi ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Reverse Micelle ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Actual State ◽  
Test Reaction ◽  
Potential Measurement ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Mo Content

TiO2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol–gel method allowing the dispersion of Mo atoms in the TiO2 matrix. Their textural and surface properties were characterized by means of X-ray powder diffraction, micro-Raman spectroscopy, N2 adsorption/desorption isotherms at −196 °C, energy dispersive X-ray analysis coupled to field emission scanning electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV–Vis spectroscopy, and ζ-potential measurement. The photocatalytic degradation of Rhodamine B (under visible light and low irradiance) in water was used as a test reaction as well. The ensemble of the obtained experimental results was analyzed in order to discover the actual state of Mo in the final materials, showing the occurrence of both bulk doping and Mo surface species, with progressive segregation of MoOx species occurring only at a higher Mo content.

Structural, Optical and Chemical Properties of Zns and Cds Nanoparticles Obtained by an Improved Colloidal Chemistry Synthetic Route.

2001 ◽  
Vol 676 ◽  
Author(s):  
M. Lucia Curri ◽  
Angela Agostiano ◽  
Mario Della Monica ◽  
Gabriella Leo ◽  
Mauro Lomascolo ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Properties ◽  
Solid Substrate ◽  
Scanning Tunneling ◽  
Cds Nanoparticles ◽  
Synthetic Route ◽  
Tunneling Microscopy ◽  
X Ray ◽  
Vis Spectroscopy ◽  
And Chemical Properties

ABSTRACTIn this work an improved synthetic route that exploits a quaternary water-in-oil microemulsion has been used to obtain nanocrystals of ZnS, CdS and their mixed compounds, - CdxZn1-xS - differing by their size and composition and having high crystalline quality, small dimensions and a quite good size distribution. The opportunity offered by the use of water-in-oil microemulsion to immobilize the nanocrystals onto solid substrate by self-assembling to obtain stable adherent layers has also been exploited.The physical and chemical properties of obtained nanocrystals and layers have been investigated by UV-vis spectroscopy, X-Ray Diffraction X-ray Photoelectron Spectroscopy and Scanning Tunneling Microscopy. The role played by the co-surfactant (pentanol) in controlling nanocrystal size and stability has been discussed.

scholarly journals Characterization of Photoactive Fe-TiO2 Lime Coatings for Building Protection: The Role of Iron Content

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1847 ◽  
Author(s):  
Chrysi Kapridaki ◽  
Nikolaos Xynidis ◽  
Eleftheria Vazgiouraki ◽  
Nikolaos Kallithrakas-Kontos ◽  
Pagona Maravelaki-Kalaitzaki
Keyword(s):  
Tio2 Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Nitrogen Adsorption ◽  
Visible Radiation ◽  
Edge Structure ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Iron-doped TiO2 nanoparticles, ranging in Fe concentrations from 0.05 up to 1.00% w/w, were synthesized through a simple sol-gel method. Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), Ultraviolet-Visible (UV-Vis) spectroscopy, nitrogen adsorption−desorption isotherms, X-ray photoelectron spectroscopy (XPS), and X-ray absorption near-edge structure spectroscopy (XANES) were used to characterize the synthesized nanoparticles. The characterization of the Fe-doped TiO2 nanoparticles revealed the predominant presence of anatase crystalline form, as well as the incorporation of the Fe3+ ions into the crystal lattice of TiO2. The photocatalytic assessment of the Fe-doped TiO2 nanoparticles indicated that the low iron doping titania (0.05 and 0.10% w/w) have a positive effect on the photocatalytic degradation of Methyl Orange under visible radiation. Moreover, FTIR monitoring of calcium hydroxide pastes enriched with low Fe-doped TiO2 revealed enhancement of carbonation at both early and later stages. Improved photocatalytic performance and increased lime carbonation, observed in lime coatings with low Fe-doped TiO2 admixtures, established them as invaluable contributors to the protection of the built environment.

scholarly journals Nano-PAA-CuCl2 Composite as Fenton-Like Reusable Catalyst to Enhanced Degrade Organic Pollutant MB/MO

Catalysts ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Yang Dang ◽  
Yu Cheng ◽  
Yukun Zhou ◽  
Yifei Huang ◽  
Kaige Wang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Organic Pollutant ◽  
Energy Dispersive Spectrometer ◽  
Chemical Properties ◽  
Anodic Alumina ◽  
Alumina Substrate ◽  
Reusable Catalyst ◽  
X Ray ◽  
Nanoporous Anodic Alumina

The treatment of organic dye contaminants in wastewaters has now becoming more imperative. Fenton-like degradation of methylene blue (MB) and methyl orange (MO) in aqueous solution was investigated by using a nanostructure that a layer of CuCl2 nanoflake film grown on the top surface of nanoporus anodic alumina substrate (nano-PAA-CuCl2) as catalyst. The new nano-PAA-CuCl2 composite was fabricated with self-assembly approach, that is, a network porous structure film composed of CuCl2 nanoflake grown on the upper surface of nanoporous anodic alumina substrate, and the physical and chemical properties are characterized systematically with the X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and high-resolution transmission electron microscopy (HRTEM), Energy Dispersive Spectrometer (EDS), X-ray photoelectron spectroscopy (XPS). The experimental results showed that the nano-PAA-CuCl2 catalyst presented excellent properties for the degradation of two typical organic pollutants such as MB and MO, which were almost completely degraded with 8 × 10−4mol/L nano-PAA-CuCl2 catalyst after 46 min and 60 min at reaction conditions of H2O2 18 mM and 23 mM, respectively. The effects of different reaction parameters such as initial pH, H2O2 concentration, catalyst morphology and temperature were attentively studied. And more, the stability and reusability of nano-PAA-CuCl2 were examined. Finally, the mechanism of MB and MO degradation by the nano-PAA-CuCl2/H2O2 system was proposed, based on the experimental data of the BCA and the temperature-programmed reduction (H2-TPR) and theoretical analysis, the reaction kinetics belonged to the pseudo-first-order equation. This new nanoporous composite material and preparation technology, as well as its application in Fenton-like reaction, provide an effective alternative method with practical application significance for wastewater treatment.

scholarly journals Carbon-Coated SiO2 Composites as Promising Anode Material for Li-Ion Batteries

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4531
Author(s):  
Mihaela-Ramona Buga ◽  
Adnana Alina Spinu-Zaulet ◽  
Cosmin Giorgian Ungureanu ◽  
Raul-Augustin Mitran ◽  
Eugeniu Vasile ◽  
...  
Keyword(s):  
Anode Material ◽  
Photoelectron Spectroscopy ◽  
Coulombic Efficiency ◽  
Cycling Stability ◽  
Li Ion Batteries ◽  
Transfer Resistance ◽  
Promising Alternative ◽  
X Ray ◽  
Carbon Coated ◽  
Li Ion

Porous silica-based materials are a promising alternative to graphite anodes for Li-ion batteries due to their high theoretical capacity, low discharge potential similar to pure silicon, superior cycling stability compared to silicon, abundance, and environmental friendliness. However, several challenges prevent the practical application of silica anodes, such as low coulombic efficiency and irreversible capacity losses during cycling. The main strategy to tackle the challenges of silica as an anode material has been developed to prepare carbon-coated SiO2 composites by carbonization in argon atmosphere. A facile and eco-friendly method of preparing carbon-coated SiO2 composites using sucrose is reported herein. The carbon-coated SiO2 composites were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, thermogravimetry, transmission and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, cyclic voltammetry, and charge–discharge cycling. A C/SiO2-0.085 M calendered electrode displays the best cycling stability, capacity of 714.3 mAh·g−1, and coulombic efficiency as well as the lowest charge transfer resistance over 200 cycles without electrode degradation. The electrochemical performance improvement could be attributed to the positive effect of the carbon thin layer that can effectively diminish interfacial impedance.

Silver mirror reaction metallized chromatography paper for supercapacitor application

2021 ◽  
Author(s):  
I-Hsuan Chen ◽  
Jung-Hsien Chang ◽  
Ren-Jie Xie ◽  
Chia-Hui Tseng ◽  
Sheng-Rong Hsieh ◽  
...  
Keyword(s):  
Flexible Electronics ◽  
Photoelectron Spectroscopy ◽  
Cost Effective ◽  
Water Contact ◽  
X Ray ◽  
Supercapacitor Application ◽  
Resource Limited ◽  
Vis Spectroscopy ◽  
Silver Mirror ◽  
Silver Mirror Reaction

Abstract In this study, the easy-to-operate silver mirror reaction (SMR) was used for metallizing chromatography paper. The SMR-metallized paper was characterized by water contact angle measurements, a surface profiler, X-ray photoelectron spectroscopy, UV-vis spectroscopy, X-ray diffraction, and electrical resistance measurement. The characterization results show that Ag was successfully synthesized on cellulose fibers and was electrically conductive after cyclic bending. Moreover, this SMR-metallized paper was used as electrodes for fabricating a supercapacitor. This SMR-metallized paper could be used for realizing cost-effective flexible electronics applied in on-site biochemical sensing in resource-limited settings.

A Brief Review on Thermal Behaviour of PANI as Additive in Heat Transfer Fluid

2021 ◽  
Vol 02 (01) ◽  
Author(s):  
A.G.N. Sofiah ◽  
◽  
M. Samykano ◽  
S. Shahabuddin ◽  
K. Kadirgama ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Properties ◽  
Conducting Polymers ◽  
Volume Fraction ◽  
Corrosion Property ◽  
Environmental Stability ◽  
Heat Transfer Fluid ◽  
Thermal Engineering ◽  
Engineering System ◽  
Heat Transfer Fluids

Since a decade ago, investigation on nanofluids has grown significantly owing to its enhanced thermal properties compared to conventional heat transfer fluids. This engineered nanofluid has been widely used in the thermal engineering system to improve their energy consumption by improving the thermal efficiency of the system. The addition of nano-size particles as additives dispersed in the base fluids proved to significantly either improve or diminish the behaviour of the base fluids. The behaviour of the base fluid highly depends on the properties of the additives material, such as morphology, size, and volume fraction. Among the variety of nanoparticles studied, the conducting polymers have been subject of high interest due to its high environmental stability, good electrical conductivity, antimicrobial, anti-corrosion property and significantly cheap compared to other nanoparticles. As such, the main objective of the present review is to provide an overview of the work performed on thermal properties performance of conducting polymers based nanofluids.

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

Inorganic-Framework Molecularly Imprinted CdS/TiO2 for Selectively Photocatalytic Degradation of Di (2-ethylhexyl) phthalate

2019 ◽  
Vol 41 (2) ◽  
pp. 308-308
Author(s):  
Fangyan Chen Fangyan Chen ◽  
Yiming Liu Yiming Liu ◽  
Xi Zhang Xi Zhang ◽  
Lina He and Yubin Tang Lina He and Yubin Tang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Tetrabutyl Titanate ◽  
Template Molecule ◽  
Molecularly Imprinted ◽  
X Ray ◽  
Simulated Solar Light ◽  
Specific Recognition ◽  
Vis Spectroscopy ◽  
Inorganic Framework ◽  
Ethylhexyl Phthalate

In order to improve the photocatalytic efficiency and selectivity of di (2-ethylhexyl) phthalate (DEHP) under solar-driven, the inorganic-framework molecularly imprinted CdS/TiO2, named as MIP-CdS/TiO2, was prepared by using DEHP as template molecule and tetrabutyl titanate as titanium source and functional monomer. The as-prepared MIP-CdS/TiO2 was characterized by scanning electron microscopy (SEM), X-ray energy spectrum (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV-Vis Spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS) and photoluminescence spectrum (PL). And the specific recognition and photocatalytic selectivity of MIP-CdS/TiO2 to DEHP were investigated. The results show that inorganic-framework molecular imprinting on the surface of CdS/TiO2 can result in existence of specific recognition sites of DEHP, extend and intensify the absorption visible light of CdS/TiO2, inhibit the recombination of the photo-induced electron-holes pairs. MIP-CdS/TiO2 has a specific recognition to DEHP. The binding selectivity coefficients of DEHP relative to its analogues DBP and DMP are 2.78 and 2.60, respectively. Compared with CdS/TiO2, MIP-CdS/TiO2 exhibits higher photocatalytic activity and selectivity for DEHP. Under simulated solar light irradiation, the degradation efficiency of DEHP photocatalyzed by MIP-CdS/TiO2 is 75.5%, which is 1.63 times as high as that of DEHP photocatalyzed by CdS/TiO2.

Sign in / Sign up

Export Citation Format

Share Document