Silver mirror reaction metallized chromatography paper for supercapacitor application

2021 ◽  
Author(s):  
I-Hsuan Chen ◽  
Jung-Hsien Chang ◽  
Ren-Jie Xie ◽  
Chia-Hui Tseng ◽  
Sheng-Rong Hsieh ◽  
...  
Keyword(s):  
Flexible Electronics ◽  
Photoelectron Spectroscopy ◽  
Cost Effective ◽  
Water Contact ◽  
X Ray ◽  
Supercapacitor Application ◽  
Resource Limited ◽  
Vis Spectroscopy ◽  
Silver Mirror ◽  
Silver Mirror Reaction

Abstract In this study, the easy-to-operate silver mirror reaction (SMR) was used for metallizing chromatography paper. The SMR-metallized paper was characterized by water contact angle measurements, a surface profiler, X-ray photoelectron spectroscopy, UV-vis spectroscopy, X-ray diffraction, and electrical resistance measurement. The characterization results show that Ag was successfully synthesized on cellulose fibers and was electrically conductive after cyclic bending. Moreover, this SMR-metallized paper was used as electrodes for fabricating a supercapacitor. This SMR-metallized paper could be used for realizing cost-effective flexible electronics applied in on-site biochemical sensing in resource-limited settings.

HIGHLY CATALYTIC Ag/Co3O4 NANOCATALYSTS FABRICATED FOR RhB DYE DEGRADATION THROUGH A SIMPLE SILVER-MIRROR REACTION UNDER VISIBLE LIGHT

NANO ◽  
2014 ◽  
Vol 09 (08) ◽  
pp. 1450090 ◽  
Author(s):  
XIAOLEI SI ◽  
GUANGLIANG CHEN ◽  
ZHILI CHEN ◽  
JUN HUANG ◽  
SHIHUA CHEN ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Ag Nanoparticles ◽  
Dye Degradation ◽  
Precipitation Method ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Silver Mirror ◽  
Silver Mirror Reaction

In this paper, a highly catalytic and nanosized Ag / Co 3 O 4 composite for rhodamine B ( RhB ) degradation was fabricated by using the co-precipitation method at room temperature. The Ag / Co 3 O 4 structure and catalytic properties were characterized through scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) gas-sorption measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-Vis spectroscopy. The results showed that the Co 3 O 4 nanosheets prepared by hydrothermal synthesis mainly exposed (2 2 0) and (1 1 1) facets, which played an important role in determining its catalytic oxidation performance. The Co 3 O 4 nanosheets doped with Ag nanoparticles by a simple silver-mirror reaction exhibited a stable and well-dispersed property in dye solution. Compared to the Ag and Co 3 O 4 nanostructure, the Ag nanoparticles with bigger diameter (10 nm) on Co 3 O 4 surface also readily produced surface-active oxygen species and exhibited a higher catalytic activity for the degradation of RhB solution (5 mg ⋅ L-1) under the visible light. The kinetic constant K of Ag / Co 3 O 4 catalyst for RhB degradation reaction was evaluated to 0.02724 min-1, which is relatively higher than those reported in the literatures.

East Asian Calligraphy Black Ink-Coated Paper as Flexible Conducting Electrode for Supercapacitor

2021 ◽  
Author(s):  
Ren-Jie Xie ◽  
I-Chun Cheng ◽  
Jian-Zhang Chen
Keyword(s):  
Flexible Electronics ◽  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
East Asian ◽  
Electrical Conductance ◽  
Angle Measurement ◽  
Bending Test ◽  
Coated Paper ◽  
Water Contact ◽  
X Ray

Abstract East Asian calligraphy black ink (hereafter called simply “black ink”) is used to fabricate flexible conducting chromatography paper electrode by a simple and low-cost method. The black ink-coated paper was characterized by scanning electron microscopy, surface profiler, water contact angle measurement, electrical resistance measurement, X-ray photoelectron spectroscopy, and X-ray diffraction. The hydrophilicity slightly decreased after black ink coating but still provided good adhesion to the follow-up reduced graphene oxide/polyaniline/chitosan slurry coating for fabricating supercapacitor electrodes. A 1000-cycle repeated bending test with a bending radius of 5 mm revealed good conductance retention. Instrumental analyses indicated that the carbon black in the black ink was the main contributor to the electrical conductance. The supercapacitor with black-ink-coated paper electrodes exhibited an areal specific capacitance of up to 179.08 mF/cm² and coulomb efficiency of 80%. This confirmed that the black-ink-coated paper electrode could be feasibly applied to a supercapacitor. This black-ink-coated paper can be easily fabricated in resource-limited settings, and it provides new possibilities for the use of paper-based electrodes in flexible electronics.

Use of anti-solvent to enhance thermoelectric response of hybrid-halide perovskite thin films

2022 ◽  
Author(s):  
Shrikant SAINI ◽  
Izuki Matsumoto ◽  
Sakura Kishishita ◽  
Ajay Kumar Baranwal ◽  
Tomohide Yabuki ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Cost Effective ◽  
Performance Tuning ◽  
Charge Carrier Density ◽  
X Ray ◽  
Thermoelectric Energy Harvesting ◽  
Halide Perovskite

Abstract Hybrid halide perovskite has been recently focused on thermoelectric energy harvesting due to the cost-effective fabrication approach and ultra-low thermal conductivity. To achieve high performance, tuning of electrical conductivity is a key parameter that is influenced by grain boundary scattering and charge carrier density. The fabrication process allows tuning these parameters. We report the use of anti-solvent to enhance the thermoelectric performance of lead-free hybrid halide perovskite, CH3NH3SnI3, thin films. Thin films with anti-solvent show higher connectivity in grains and higher Sn+4 oxidation states which results in enhancing the value of electrical conductivity. Thin films were prepared by a cost-effective wet process. Structural and chemical characterizations were performed using x-ray diffraction, scanning electron microscope, and x-ray photoelectron spectroscopy. The value of electrical conductivity and the Seebeck coefficient were measured near room temperature. The high value of power factor (1.55 µW/m.K2 at 320 K) was achieved for thin films treated with anti-solvent.

scholarly journals Superhydrophobic Film on Hot-Dip Galvanized Steel with Corrosion Resistance and Self-Cleaning Properties

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 687 ◽  
Author(s):  
Chongchong Li ◽  
Ruina Ma ◽  
An Du ◽  
Yongzhe Fan ◽  
Xue Zhao ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Photoelectron Spectroscopy ◽  
Copper Nitrate ◽  
Galvanized Steel ◽  
Electrochemical Technique ◽  
Etching Time ◽  
Galvanic Replacement ◽  
Water Contact ◽  
X Ray ◽  
Self Cleaning

Super-hydrophobic film with hierarchical micro/nano structures was prepared by galvanic replacement reaction process on the surface of galvanized steel. The effects of the etching time and copper nitrate concentration on the wetting property of the as-prepared surfaces were studied. Scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and electrochemical technique were employed to characterize the surface morphology, chemical composition, and corrosion resistance. The stability and self-cleaning property of the as-fabricated super-hydrophobic film were also evaluated. The super-hydrophobic film can be obtained within 3 min and possesses a water contact angle of 164.3° ± 2°. Potentiodynamic polarization measurements indicated that the super-hydrophobic film greatly improved the corrosion resistance of the galvanized steel in 3.5 wt % NaCl aqueous solution. The highest inhibition efficiency was estimated to be 96.6%. The obtained super-hydrophobic film showed good stability and self-cleaning property.

scholarly journals Microwave-assisted preparation of ZnS and ZnSe nanocrystals with different morphologies for photodegradation process of organic dyes

2019 ◽  
Author(s):  
Katarzyna Matras-Postolek ◽  
A. Zaba ◽  
S. Sovinska ◽  
D. Bogdal
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Organic Dyes ◽  
Zinc Sulphide ◽  
Conventional Heating ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy

Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained  nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV).

The Surface Modification and Characteristics of Useful Expanded PTFE Composites by Photo-Radiation Methods

2013 ◽  
Vol 690-693 ◽  
pp. 1636-1640 ◽  
Author(s):  
Te Hsing Wu ◽  
Ko Shao Chen ◽  
Lie Hang Shen
Keyword(s):  
Contact Angle ◽  
Acetic Acid ◽  
Photoelectron Spectroscopy ◽  
Plasma Deposition ◽  
Material Surface ◽  
Water Contact ◽  
X Ray ◽  
Hydrogel Film ◽  
Γ Ray ◽  
Ptfe Composites

In this study, We immobilized hydrogel material onto expanded polytetrafluoroethylene (ePTFE) film and used as an functional biomaterial. The material is a film containing titanium oxide onto polymer sheet. The hydrogel film is hydrophilic, bacterial inactivated and bio-compatible. In order to improve the ePTFE film biocompatibility, the cold plasma or γ-ray technology was used with acetic acid as monomer to deposit onto ePTFE film and then (N-isopropylacrylamide) was grafted onto the surface by radiation photo-grafting. The characteristics of the material surface were evaluated with X-ray photoelectron spectroscopy (XPS), FTIR and water contact angle. It was found that the contact angle of water on the untreated ePTFE significantly decrease from125° to 72° after ePTFE film being treated with acetic acid plasma deposition procedure. Due to the hydrophilicity of poly (N-isopropylacrylamide), so the contact angle of water on the ePTFE-g-NIPAAm almost approached to 0°. This thermal sensitive ePTFE hydrogels can be applied to artificial guiding tube and wound dressing material.

Inorganic-Framework Molecularly Imprinted CdS/TiO2 for Selectively Photocatalytic Degradation of Di (2-ethylhexyl) phthalate

2019 ◽  
Vol 41 (2) ◽  
pp. 308-308
Author(s):  
Fangyan Chen Fangyan Chen ◽  
Yiming Liu Yiming Liu ◽  
Xi Zhang Xi Zhang ◽  
Lina He and Yubin Tang Lina He and Yubin Tang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Tetrabutyl Titanate ◽  
Template Molecule ◽  
Molecularly Imprinted ◽  
X Ray ◽  
Simulated Solar Light ◽  
Specific Recognition ◽  
Vis Spectroscopy ◽  
Inorganic Framework ◽  
Ethylhexyl Phthalate

In order to improve the photocatalytic efficiency and selectivity of di (2-ethylhexyl) phthalate (DEHP) under solar-driven, the inorganic-framework molecularly imprinted CdS/TiO2, named as MIP-CdS/TiO2, was prepared by using DEHP as template molecule and tetrabutyl titanate as titanium source and functional monomer. The as-prepared MIP-CdS/TiO2 was characterized by scanning electron microscopy (SEM), X-ray energy spectrum (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV-Vis Spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS) and photoluminescence spectrum (PL). And the specific recognition and photocatalytic selectivity of MIP-CdS/TiO2 to DEHP were investigated. The results show that inorganic-framework molecular imprinting on the surface of CdS/TiO2 can result in existence of specific recognition sites of DEHP, extend and intensify the absorption visible light of CdS/TiO2, inhibit the recombination of the photo-induced electron-holes pairs. MIP-CdS/TiO2 has a specific recognition to DEHP. The binding selectivity coefficients of DEHP relative to its analogues DBP and DMP are 2.78 and 2.60, respectively. Compared with CdS/TiO2, MIP-CdS/TiO2 exhibits higher photocatalytic activity and selectivity for DEHP. Under simulated solar light irradiation, the degradation efficiency of DEHP photocatalyzed by MIP-CdS/TiO2 is 75.5%, which is 1.63 times as high as that of DEHP photocatalyzed by CdS/TiO2.

Reduced Graphene Oxide Supported Molybdenum Oxide Hybrid Nanocomposites: High Performance Electrode Material for Supercapacitor and Photocatalytic Applications

2020 ◽  
Vol 20 (7) ◽  
pp. 4035-4046
Author(s):  
Rengasamy Dhanabal ◽  
Dhanasekaran Naveena ◽  
Sivan Velmathi ◽  
Arumugam Chandra Bose
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Hybrid Nanocomposites ◽  
X Ray ◽  
Supercapacitor Application ◽  
Quenching Effect ◽  
Reduced Graphene

Using a simple solution based synthesis route, hexagonal MoO3 (h-MoO3) nanorods on reduced graphene oxide (RGO) sheets were prepared. The structure and morphology of resulting RGO-MoO3 nanocomposite were characterized using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The optical property was studied using UV-Visible diffuse reflectance spectroscopy (UV-Vis DRS) and photoluminescence spectroscopy (PL). The RGO-MoO3 nanocomposites were used as an electrode for supercapacitor application and photocatalyst for photodegradation of methylene blue (MB) and rhodamine B (RhB) under visible light irradiation. We demonstrated that the RGO-MoO3 electrode is capable of delivering high specific capacitance of 134 F/g at current density of 1 A/g with outstanding cyclic stability for 2000 cycles. The RGOMoO3 photocatalyst degrades 95% of MB dye within 90 min, and a considerable recyclability up to 4 cycles was observed. The quenching effect of scavengers test confirms holes are main reactive species in the photocatalytic degradation of MB. Further, the charge transfer process between RGO and MoO3 was schematically demonstrated.

Photocatalytic Decomposition of Methylene Blue with Lanthanum Doping TiO2 under Visible Light Irradiation

2013 ◽  
Vol 734-737 ◽  
pp. 2163-2167
Author(s):  
Guang Xiu Cao ◽  
Zhong Hou Zhang ◽  
Bin Zhai
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Photoelectron Spectroscopy ◽  
Light Irradiation ◽  
Photocatalytic Decomposition ◽  
Lanthanum Doping ◽  
X Ray ◽  
Degradation Rates ◽  
Vis Spectroscopy

Lanthanum doped TiO2 powders were prepared by hydrolysis of titanium tetra-n-butyl oxide and La (NO3)3 in solution. The resulting powders were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis absorption spectroscopy. The photocatalytic activities of doped samples were evaluated by the decomposition of methylene blue under visible light irradiation. The XRD results showed that the doping of lanthanum could not only efficiently inhibit the grain growth but also suppress the phase transition of anatase to rutile. UV-Vis spectroscopy of lanthanum doping TiO2 indicated that the absorption onset red-shifted to the visible light region. XPS results revealed that La2O3 had formed which could enhance the surface area. The degradation rates of methylene blue verified that the visible light photocatalytic activity of TiO2 has been enhanced by the doping of lanthanum.

scholarly journals Application of Reverse Micelle Sol–Gel Synthesis for Bulk Doping and Heteroatoms Surface Enrichment in Mo-Doped TiO2 Nanoparticles

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 937 ◽  
Author(s):  
Roberto Nasi ◽  
Serena Esposito ◽  
Francesca Freyria ◽  
Marco Armandi ◽  
Tanveer Gadhi ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Reverse Micelle ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Actual State ◽  
Test Reaction ◽  
Potential Measurement ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Mo Content

TiO2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol–gel method allowing the dispersion of Mo atoms in the TiO2 matrix. Their textural and surface properties were characterized by means of X-ray powder diffraction, micro-Raman spectroscopy, N2 adsorption/desorption isotherms at −196 °C, energy dispersive X-ray analysis coupled to field emission scanning electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV–Vis spectroscopy, and ζ-potential measurement. The photocatalytic degradation of Rhodamine B (under visible light and low irradiance) in water was used as a test reaction as well. The ensemble of the obtained experimental results was analyzed in order to discover the actual state of Mo in the final materials, showing the occurrence of both bulk doping and Mo surface species, with progressive segregation of MoOx species occurring only at a higher Mo content.

Sign in / Sign up

Export Citation Format

Share Document