scholarly journals Development of Functionalized Carbon Nano-Onions Reinforced Zein Protein Hydrogel Interfaces for Controlled Drug Release

Pharmaceutics ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 621 ◽  
Author(s):  
Narsimha Mamidi ◽  
Aldo González-Ortiz ◽  
Irasema Lopez Romo ◽  
Enrique V. Barrera
Keyword(s):  
Drug Release ◽  
Colloidal Stability ◽  
Controlled Drug Release ◽  
Acoustic Cavitation ◽  
Drug Transporter ◽  
Ph Responsive ◽  
Sustained Drug Release ◽  
In Vitro Degradation ◽  
Selective Delivery

In the current study, poly 4-mercaptophenyl methacrylate-carbon nano-onions (PMPMA-CNOs = f-CNOs) reinforced natural protein (zein) composites (zein/f-CNOs) are fabricated using the acoustic cavitation technique. The influence of f-CNOs inclusion on the microstructural properties, morphology, mechanical, cytocompatibility, in-vitro degradation, and swelling behavior of the hydrogels are studied. The tensile results showed that zein/f-CNOs hydrogels fabricated by the acoustic cavitation system exhibited good tensile strength (90.18 MPa), compared with the hydrogels fabricated by the traditional method and only microwave radiation method. It reveals the magnitude of physisorption and degree of colloidal stability of f-CNOs within the zein matrix under acoustic cavitation conditions. The swelling behaviors of hydrogels were also tested and improved results were noticed. The cytotoxicity of hydrogels was tested with osteoblast cells. The results showed good cell viability and cell growth. To explore the efficacy of hydrogels as drug transporters, 5-fluorouracil (5-FU) release was measured under gastric and intestinal pH environment. The results showed pH-responsive sustained drug release over 15 days of study, and pH 7.4 showed a more rapid drug release than pH 2.0 and 4.5. Nonetheless, all the results suggest that zein/f-CNOs hydrogel could be a potential pH-responsive drug transporter for a colon-selective delivery system.

scholarly journals pH-Responsive and Biodegradable ZnO-Capped Mesoporous Silica Composite Nanoparticles for Drug Delivery

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 3950
Author(s):  
Minmin Chen ◽  
Jinxia Hu ◽  
Cancan Bian ◽  
Chenghao Zhu ◽  
Chen Chen ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Mesoporous Silica ◽  
Mesoporous Silica Nanoparticles ◽  
Controlled Drug Release ◽  
Composite Nanoparticles ◽  
Ph Responsive ◽  
Silica Composite

As a drug delivery system (DDS), traditional mesoporous silica nanoparticles (MSNs) suffer from bioaccumulation in vivo and premature drug release in systemic circulation due to low degradation rate and lack of protective gatekeeper. Herein, we developed a safe and intelligent DDS with characteristics of pH-responsive biodegradation and controlled drug release based on mesoporous silica composite nanoparticles (MSCNs) capped with ZnO quantum dots (ZnO QDs). Acidic degradable MSCNs were successfully synthesized by doping Ca2+ and PO43− into the MSNs’ framework. The in vitro doxorubicin hydrochloride (DOX) release was inhibited at neutral pH 7.4 but triggered significantly at pH 5.0 due to the dissociation of ZnO caps. The internalization behavior and cytotoxicity of 4T1 cells indicated MSCNs-ZnO could efficiently deliver DOX into the cells with significant antitumor activity. Such a DDS with pH-responsive biodegradation and controlled drug release has promising potential for cancer therapy.

IN VITROCHARACTERIZATION OF TRAMADOL-HCL-LOADED POLYOXALATE MICROSPHERES DESIGNED FOR CONTROLLED DRUG RELEASE

2015 ◽  
Vol 27 (03) ◽  
pp. 1550022
Author(s):  
Cheon Jung Lee ◽  
Su Young Kim ◽  
Hyun Gu Lee ◽  
Jaewon Yang ◽  
Jin Young Park ◽  
...  
Keyword(s):  
Drug Release ◽  
High Performance ◽  
Controlled Drug Release ◽  
Physicochemical Characteristics ◽  
In Vitro Test ◽  
X Ray Diffraction ◽  
Sustained Drug Release ◽  
Release Formulation ◽  
Preparation Conditions

This study evaluates the properties of Tramadol- HCl -loaded polyoxalate (TH-loaded POX) microspheres prepared by oil-in-oil (O1/O2) emulsion solvent evaporation method, specifically designed for sustained drug release. Morphology and physicochemical characteristics of the as-fabricated were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR) spectroscopy, while the encapsulation efficiency and release profile of drug (Tramadol- HCl , TH) from POX microspheres were assessed by high-performance liquid chromatography (HPLC). The influence of reaction temperature, stirring speed, initial drug ratio, molecular weight (Mw) and concentration of polyoxalate (POX) on the fabrication of TH-loaded POX microspheres were investigated. Results showed that the characteristics of the microspheres and drug-loaded content can be optimized by adjusting the parameters of preparation conditions. Also, the degradation behavior of TH-loaded POX microspheres was evaluated from in vitro test for 2 weeks. Overall, the results showed that POX microsphere can be one of the promising polymers for controlled injection release formulation with site-specific drug release capabilities.

Synthesis, Characterization and in-vitro drug release studies of a macromolecular prodrug of Didanosine.

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
Neeraj Agrawal ◽  
M.J. Chandrasekar ◽  
U.V. Sara ◽  
Rohini A.
Keyword(s):  
Drug Release ◽  
Drug Level ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Alkaline Environment ◽  
Stomach Acid ◽  
Release Studies ◽  
Macromolecular Prodrug

A macromolecular prodrug of didanosine (ddI) for oral administration was synthesized and evaluated for in-vitro drug release profile. Didanosine was first coupled to 2-hydroxy ethyl methacrylate (HEMA) through a succinic spacer to form HEMA-Suc-ddI monomeric conjugate which was subsequently polymerized to yield Poly(HEMA-Suc-ddI) conjugate. The structures of the synthesized compounds were characterized by FT-IR, Mass and 1H-NMR spectroscopy. The prodrug was subjected for in-vitro drug release studies in buffers of pH 1.2 and 7.4 mimicking the upper and lower GIT. The results showed that the drug release from the polymeric backbone takes place in a sustained manner over a period of 24 h and the amount of drug released was comparatively higher at pH 7.4 indicating that the drug release takes place predominantly at the alkaline environment of the lower GIT rather than at the acidic environment of the upper GIT. This pH dependent sustained drug release behavior of the prodrug may be capable of reducing the dose limiting toxicities by maintaining the plasma drug level within the therapeutic range and increasing t1/2 of ddI. Moreover, the bioavailability of the drug should be improved as the prodrug releases ddI predominantly in the alkaline environment which will reduce the degradation of ddI in the stomach acid.

Formulation and Evaluation of Chitosan-Polyaniline Nanocomposites for Controlled Release of Anticancer Drug Doxorubicin

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Dillip Kumar Behera ◽  
Kampal Mishra ◽  
Padmolochan Nayak
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Nanocomposite Films ◽  
Casting Method ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Clay Particles ◽  
Solution Casting Method ◽  
Nanoclay Content

In this present work, chitosan (CS) crosslink with polyaniline (PANI) with montmorilonite (MMT) called as (CSPANI/MMT) and CS crosslink with PANI without MMT called as (CS-PANI) were prepared by employing the solution casting method. Further the formation of nanocomposites CS-PANI/MMT and CS-PANI were investigated using XRD, FTIR, SEM and tensile strength. Water uptake and swelling ratio of the CS-PANI and CS-PANI/MMT were found to decrease with increase in concentration of clay. Mechanical properties of the CS-PANI and CS-PANI/MMT were assessed in terms of tensile strength and extensibility using texture analyzer. Increase in tensile strength and reduction in extensibility was reported with increase in the nanoclay content. In vitro drug release study on CS-PANI and CS-PANI/MMT indicated pronounced sustained release of doxorubicin by the incorporation of clay particles in the CS polymer matrix. Overall CSPANI/MMT nanocomposite films exhibited improved mechanical and sustained drug release properties than CS-PANI.

Development and Optimization of Sustained Release Moxifloxacin Hydrochloride Loaded Nanoemulsion for Ophthalmic Drug Delivery: A 32 Factorial Design Approach

2020 ◽  
Vol 12 ◽  
Author(s):  
Sagar R. Pardeshi ◽  
Harshal A. Mistari ◽  
Rakhi S. Jain ◽  
Pankaj R. Pardeshi ◽  
Rahul L. Rajput ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Factorial Design ◽  
Water Solubility ◽  
Tween 80 ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Bacterial Conjunctivitis ◽  
Promising Alternative

Background: Moxifloxacin is a BCS class I drug used in the treatment of bacterial conjunctivitis and keratitis. Despite its high water solubility, it possesses limited bioavailability due to anatomical and physiological constraints associated with the eyes which required multiple administrations to achieve a therapeutic effect. Objective: In order to prolong drug release and to improve antibacterial efficacy for the treatment of bacterial keratitis and conjunctivitis, moxifloxacin loaded nanoemulsion was developed. Methods: The concentration of oil (oleic acid), surfactant (tween 80), and cosurfactant (propylene glycol) were optimized by employing a 3-level 2-factorial design of experiment for the development of nanoemulsion. The developed nanoemulsion was characterized by particle size distribution, viscosity, refractive index, pH, drug content and release, transmission electron microscopy (TEM), and antibacterial study. The compatibility of the drug with the excipients was accessed by Fourier transform infrared spectroscopy (FTIR). Result: The average globule size was found to be 198.20 nm. The TEM study reveals the globules were nearly spherical and are well distributed. In vitro drug release profile for nanoemulsion shown sustained drug release (60.12% at the end of 6 h) compared to drug solution, where complete drug released within 2 h. The antibacterial effectiveness of the drug-loaded nanoemulsion was improved against S. aureus compared with the marketed formulation. Conclusion: The formulated sustained release nanoemulsion could be a promising alternative to eye drop with improved patient compliance by minimizing dosing frequency with improved antibacterial activity.

scholarly journals Comparative Analysis of Morphological and Release Profiles in Ocular Implants of Acetazolamide Prepared by Electrospinning

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 260
Author(s):  
Mariana Morais ◽  
Patrícia Coimbra ◽  
Maria Eugénia Pina
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Morbidity Rate ◽  
Coating Film ◽  
Sustained Drug Release ◽  
Coated Implant ◽  
Poly Ethylene ◽  
Coaxial Fibers ◽  
Release Profiles

The visual impairment that often leads to blindness causes a higher morbidity rate. The goal of this work is to create a novel biodegradable polymeric implant obtained from coaxial fibers containing the dispersed drug—acetazolamide—in order to achieve sustained drug release and increase patient compliance, which is of the highest importance. Firstly, during this work, uncoated implants were produced by electrospinning, and rolled in the shape of small cylinders that were composed of uniaxial and coaxial fibers with immobilized drug inside. The fibers were composed by PCL (poly ε-caprolactone) and Lutrol F127 (poly (oxyethylene-b-oxypropylene-b-oxyethylene)). The prepared implants exhibited a fast rate of drug release, which led to the preparation of new implants incorporating the same formulation but with an additional coating film prepared by solvent casting and comprising PCL and Lutrol F127 or PCL and Luwax EVA 3 ((poly (ethylene-co-vinyl acetate)). Implants were characterized and in vitro release profiles of acetazolamide were obtained in phosphate buffered saline (PBS) at 37 °C. The release profile of the acetazolamide from coated implant containing Luwax EVA 3 is considerably slower than what was observed in case of coated implants containing Lutrol F127, allowing a sustained release and an innovation relatively to other ocular drug delivery systems.

In vitro degradation and drug release from polymer blends based on poly(dl-lactide), poly(l-lactide-glycolide) and poly(ε-caprolactone)

2009 ◽  
Vol 45 (5) ◽  
pp. 1284-1292 ◽  
Author(s):  
Paul F. McDonald ◽  
John G. Lyons ◽  
Luke M. Geever ◽  
Clement L. Higginbotham
Keyword(s):  
Drug Release ◽  
Polymer Blends ◽  
In Vitro Degradation

scholarly journals Organic-Inorganic Hybrid Hollow Mesoporous Organosilica Nanoparticles for Efficient Ultrasound-Based Imaging and Controlled Drug Release

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaoqin Qian ◽  
Wenping Wang ◽  
Wentao Kong ◽  
Yu Chen
Keyword(s):  
Drug Release ◽  
Ultrasound Irradiation ◽  
Controlled Drug Release ◽  
Inorganic Hybrid ◽  
Templating Method ◽  
Anticancer Drug Delivery ◽  
Cavitation Effect ◽  
Contrast Enhanced

A novel anticancer drug delivery system with contrast-enhanced ultrasound-imaging performance was synthesized by a typical hard-templating method using monodispersed silica nanoparticles as the templates, which was based on unique molecularly organic/inorganic hybrid hollow periodic mesoporous organosilicas (HPMOs). The highly dispersed HPMOs show the uniform spherical morphology, large hollow interior, and well-defined mesoporous structures, which are very beneficial for ultrasound-based theranostics. The obtained HPMOs exhibit excellent performances in contrast-enhanced ultrasonography bothin vitroandin vivoand can be used for the real-time determination of the progress of lesion tissues during the chemotherapeutic process. Importantly, hydrophobic paclitaxel- (PTX-) loaded HPMOs combined with ultrasound irradiation show fast ultrasound responsiveness for controlled drug release and higherin vitroandin vivotumor inhibition rates compared with free PTX and PTX-loaded HPMOs, which is due to the enhanced ultrasound-triggered drug release and ultrasound-induced cavitation effect. Therefore, the achieved novel HPMOs-based nanoparticle systems will find broad application potentials in clinically ultrasound-based imaging and auxiliary tumor chemotherapy.

Formulation development of folic acid conjugated PLGA nanoparticles for improved cytotoxicity of Caffeic acid phenethyl ester

2021 ◽  
Vol 09 ◽  
Author(s):  
Harshad S Kapare ◽  
Sathiyanarayanan L ◽  
Arulmozhi S ◽  
Kakasaheb Mahadik
Keyword(s):  
Folic Acid ◽  
Drug Release ◽  
Caffeic Acid ◽  
Caffeic Acid Phenethyl Ester ◽  
Therapeutic Effects ◽  
Formulation Development ◽  
Sustained Drug Release ◽  
Active Constituent

Background: Honey bee propolis is one of the natural product reported in various traditional systems of medicines including Ayurveda. Caffeic acid phenethyl ester (CAPE) is an active constituent of propolis which is well known for its anticancer potential. The therapeutic effects of CAPE are restricted owing to its less aqueous solubility and low bioavailability. Objective: In this study CAPE loaded folic acid conjugated nanoparticle system (CLFPN) was investigated to enhance solubility, achieve sustained drug release and improved cytotoxicity of CAPE. Methods: Formulation development, characterization and optimization were carried out by design of experiment approach. In vitro and in vivo cytotoxicity study was carried out for optimized formulations. Results: Developed nanoparticles showed particle size and encapsulation efficiency of 170 ± 2 - 195 ± 3 nm and 75.66 ± 1.52 - 78.80 ± 1.25 % respectively. Optimized formulation CLFPN showed sustained drug release over a period of 42 h. GI50 concentration was decreased by 46.09% for formulation as compared to CAPE in MCF-7 cells indicating targeting effect of CLFPN. An improved in vitro cytotoxic effect was reflected in in-vivo Daltons Ascites Lymphoma model by reducing tumor cells count. Conclusion: The desired nanoparticle characteristic with improved in vivo and in vitro cytotoxicity was shown by developed formulation. Thus it can be further investigated for biomedical applications.

Stealth doxorubicin conjugated bimetallic selenium/silver nanoparticles for targeted cervical cancer therapy

2021 ◽  
Vol 12 (4) ◽  
pp. 045006
Author(s):  
Thoko Malinga ◽  
Tukayi Kudanga ◽  
Londiwe Simphiwe Mbatha
Keyword(s):  
Cervical Cancer ◽  
Folic Acid ◽  
Colloidal Stability ◽  
Controlled Drug Release ◽  
Delivery Systems ◽  
Drug Binding ◽  
Cervical Cancer Cells ◽  
Diphenyl Tetrazolium Bromide

Abstract Bimetallic nanosized delivery systems are attracting a lot of research interest as alternatives to monometallic delivery systems. This study evaluated the ability of bimetallic selenium silver chitosan pegylated folic acid targeted nanoparticles (SeAgChPEGFA NPs) to deliver doxorubicin (DOX) in cervical cancer cells. Comparison studies using monometallic selenium chitosan pegylated folic acid (SeChPEGFA NPs) targeted NPs and free DOX were also conducted. The prepared NPs and their drug nanocomplexes were characterised morphologically and physico-chemically. Drug binding and releasing studies were conducted under a simulated environment in vitro. The cytotoxicity and apoptosis studies were studied using the 3-[(4, 5-dimethylthiazol-2-yl)−2, 5-diphenyl tetrazolium bromide] (MTT) assay and the dual dye staining. The findings revealed that the bimetallic SeAgChPEGFA NPs displayed better colloidal stability, superior physico-chemical qualities, and higher binding abilities in comparison with monometallic SeChPEGFA NPs. In addition, the SeAgChPEGFA NPs showed the pH-triggered controlled drug release and cell-specific cytotoxicity. These findings suggest that the bimetallic NPs are superior delivery systems when compared to their monometallic NPs and free drug counterparts, thus, setting a platform for further in vivo examination.

Sign in / Sign up

Export Citation Format

Share Document