scholarly journals Fabrication of Porous Polyvinylidene Fluoride/Multi-Walled Carbon Nanotube Nanocomposites and Their Enhanced Thermoelectric Performance

Polymers ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 797 ◽  
Author(s):  
Fei-Peng Du ◽  
Xuan Qiao ◽  
Yan-Guang Wu ◽  
Ping Fu ◽  
Sheng-Peng Liu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Carbon Nanotube ◽  
Seebeck Coefficient ◽  
Porous Structure ◽  
Thermoelectric Properties ◽  
Polyvinylidene Fluoride ◽  
Pvdf Film ◽  
Solvent Vapor ◽  
Multi Walled Carbon Nanotube

In this paper, a solvent vapor-induced phase separation (SVIPS) technique was used to create a porous structure in polyvinylidene fluoride/Multi-walled carbon nanotube (PVDF/MWNTs) composites with the aim of increasing the electrical conductivity through the incorporation of MWNTs while retaining a low thermal conductivity. By using the dimethylformamide/acetone mixture, porous networks could be generated in the PVDF/MWNTs composites upon the rapid volatilization of acetone. The electrical conductivity was gradually enhanced by the addition of MWNTs. At the same time, the thermal conductivity of the PVDF film could be retained at 0.1546 W·m−1·K−1 due to the porous structure being even by loaded with a high content of MWNTs (i.e., 15 wt.%). Thus, the Seebeck coefficient, power factor and figure of merit (ZT) were subsequently improved with maximum values of 324.45 μV/K, 1.679 μW·m−1·K−2, and 3.3 × 10−3, respectively. The microstructures, thermal properties, and thermoelectric properties of the porous PVDF/MWNTs composites were studied. It was found that the enhancement of thermoelectric properties would be attributed to the oxidation of MWNTs and the porous structure of the composites. The decrease of thermal conductivity and the increase of Seebeck coefficient were induced by the phonon scattering and energy-filtering effect. The proposed method was found to be facile and effective in creating a positive effect on the thermoelectric properties of composites.

Band Structure and Thermoelectric Properties of Ni(x)Zn(1-x)Fe2O4

2021 ◽  
Vol 317 ◽  
pp. 28-34
Author(s):  
Joon Hoong Lim
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Band Structure ◽  
Seebeck Coefficient ◽  
Band Gap ◽  
Thermoelectric Properties ◽  
Xrd Analysis ◽  
Valence Band Maximum ◽  
Solid State Method ◽  
Ni Content

Thermoelectric materials has made a great potential in sustainable energy industries, which enable the energy conversion from heat to electricity. The band structure and thermoelectric properties of Ni(x)Zn(1-x)Fe2O4 have been investigated. The bulk pellets were prepared from analytical grade ZnO, NiO and Fe2O3 powder using solid-state method. It was possible to obtain high thermoelectric properties of Ni(x)Zn(1-x)Fe2O4 by controlling the ratios of dopants and the sintering temperature. XRD analysis showed that the fabricated samples have a single phase formation of cubic spinel structure. The thermoelectric properties of Ni(x)Zn(1-x)Fe2O4 pellets improved with increasing Ni. The electrical conductivity of Ni(x)Zn(1-x)Fe2O4 pellets decreased with increasing Ni content. The electrical conductivity of Ni(x)Zn(1-x)Fe2O4 (x = 0.0) is (0.515 x10-3 Scm-1). The band structure shows that ZnxCu1-xFe2O4 is an indirect band gap material with the valence band maximum (VBM) at M and conduction band minimum (CBM) at A. The band gap of Ni(x)Zn(1-x)Fe2O4 increased with increasing Ni content. The increasing band gap correlated with the lower electrical conductivity. The thermal conductivity of Ni(x)Zn(1-x)Fe2O4 pellets decreased with increasing Ni content. The presence of Ni served to decrease thermal conductivity by 8 Wm-1K-1 over pure samples. The magnitude of the Seebeck coefficient for Ni(x)Zn(1-x)Fe2O4 pellets increased with increasing amounts of Ni. The figure of merit for Ni(x)Zn(1-x)Fe2O4 pellets and thin films was improved by increasing Ni due to its high Seebeck coefficient and low thermal conductivity.

scholarly journals Effect of band structure adjustment based of Cu site on the thermoelectric properties of BiCuSeO

2021 ◽  
Author(s):  
Bo Feng
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Effective Mass ◽  
Valence Band ◽  
Thermoelectric Properties ◽  
Density Of States ◽  
First Principles Calculation ◽  
Temperature Range ◽  
Ti Doping

Abstract The effect of Ti doped at Cu site on the thermoelectric properties of BiCuSeO was studied by experimental method and first principles calculation. The results show that Ti doping can cause the lattice contraction and decrease the lattice constant. Ti doping can increase the band gap and lengthen the Cu/Ti-Se bond, resulting in the decrease of carrier concentration. Ti doping can reduce the effective mass and the Bi-Se bond length, correspondingly improve the carrier mobility. Ti doping can decrease the density of states of Cu-3d and Se-4p orbitals at the top of valence band, but Ti-4p orbitals can obviously increase the density of states at the top of valence band and finally increase the electrical conductivity in the whole temperature range. With the decrease of effective mass, Ti doping would reduce the Seebeck coefficient, but the gain effect caused by the increase of electrical conductivity is more than the benefit reduction effect caused by the decrease of Seebeck coefficient, and the power factor shows an upward trend. Ti doping can reduce Young's modulus, lead to the increase of defect scattering and strain field, correspondingly reduce the lattice thermal conductivity and total thermal conductivity. It is greatly increased for the ZT values in the middle and high temperature range, with the highest value of 1.04 at 873 K.

Thermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone Melting

2008 ◽  
Vol 368-372 ◽  
pp. 547-549
Author(s):  
Jun Jiang ◽  
Ya Li Li ◽  
Gao Jie Xu ◽  
Ping Cui ◽  
Li Dong Chen
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Zone Melting ◽  
Chemical Compositions ◽  
Melting Method ◽  
Temperature Range

In the present study, n-type (Bi2Se3)x(Bi2Te3)1-x crystals with various chemical compositions were fabricated by the zone melting method. Thermoelectric properties, including Seebeck coefficient (α), electrical conductivity (σ) and thermal conductivity (κ), were measured in the temperature range of 300-500 K. The influence of the variations of Bi2Te3 and Bi2Se3 content on thermoelectric properties was studied. The increase of Bi2Se3 content (x) caused an increase in carrier concentration and thus an increase of σ and a decrease of α. The maximum figure of merit (ZT = α2σT/κ) of 0.87 was obtained at about 325 K for the composition of 93%Bi2Te3-7%Bi2Se3 with doping TeI4.

scholarly journals Effect of Grain Size and Film Thickness on the Thermoelectric Properties of Flexible Sb2Te3 Thin Films

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Pornsiri Wanarattikan ◽  
Piya Jitthammapirom ◽  
Rachsak Sakdanuphab ◽  
Aparporn Sakulkalavek
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Grain Size ◽  
Film Thickness ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Flexible Substrate ◽  
Rf Magnetron Sputtering ◽  
Mean Free Path

In this work, stoichiometric Sb2Te3 thin films with various thicknesses were deposited on a flexible substrate using RF magnetron sputtering. The grain size and thickness effects on the thermoelectric properties, such as the Seebeck coefficient (S), electrical conductivity (σ), power factor (PF), and thermal conductivity (k), were investigated. The results show that the grain size was directly related to film thickness. As the film thickness increased, the grain size also increased. The Seebeck coefficient and electrical conductivity corresponded to the grain size of the films. The mean free path of carriers increases as the grain size increases, resulting in a decrease in the Seebeck coefficient and increase in electrical conductivity. Electrical conductivity strongly affects the temperature dependence of PF which results in the highest value of 7.5 × 10−4 W/m·K2 at 250°C for film thickness thicker than 1 µm. In the thermal conductivity mechanism, film thickness affects the dominance of phonons or carriers. For film thicknesses less than 1 µm, the behaviour of the phonons is dominant, while both are dominant for film thicknesses greater than 1 µm. Control of the grain size and film thickness is thus critical for controlling the performance of Sb2Te3 thin films.

High-temperature thermoelectric properties of n-type BayNixCo4−xSb12

2001 ◽  
Vol 16 (12) ◽  
pp. 3343-3346 ◽  
Author(s):  
X. F. Tang ◽  
L. M. Zhang ◽  
R. Z. Yuan ◽  
L. D. Chen ◽  
T. Goto ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
High Temperature ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Electron Concentration ◽  
Lattice Thermal Conductivity ◽  
Filling Fraction ◽  
Ni Content ◽  
Increasing Temperature

Effects of Ba filling fraction and Ni content on the thermoelectric properties of n-type BayNixCo4−xSb12 (x = 0−0.1, y = 0−0.4) were investigated at temperature range of 300 to 900 K. Thermal conductivity decreased with increasing Ba filling fraction and temperature. When y was fixed at 0.3, thermal conductivity decreased with increasing Ni content and reached a minimum value at about x = 0.05. Lattice thermal conductivity decreased with increasing Ni content, monotonously (y ≤ 0.1). Electron concentration and electrical conductivity increased with increasing Ba filling fraction and Ni content. Seebeck coefficient increased with increasing temperature and decreased with increasing Ba filling fraction and Ni content. The maximum ZT value of 1.25 was obtained at about 900 K for n-type Ba0.3Ni0.05Co3.95Sb12.

Synthesis and Thermoelectric Properties of Co4-XFeXSb12-YSnY Skutterudites

2011 ◽  
Vol 695 ◽  
pp. 65-68 ◽  
Author(s):  
Kwan Ho Park ◽  
Il Ho Kim
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Phonon Scattering ◽  
Charge Compensation ◽  
Fe Doping ◽  
Sn Doping ◽  
Double Doping

Co4-xFexSb12-ySny skutterudites were synthesized by mechanical alloying and hot pressing, and thermoelectric properties were examined. The carrier concentration increased by doping and thereby the electrical conductivity increased compared with intrinsic CoSb3. Every specimen had a positive Seebeck coefficient. Fe doping caused a decrease in the Seebeck coefficient but it could be enhanced by Fe/Sn double doping possibly due to charge compensation. The thermal conductivity was desirably very low and this originated from ionized impurity-phonon scattering. Thermoelectric properties were improved remarkably by Fe/Sn doping, and a maximum figure of merit, ZT = 0.5 was obtained at 723 K in the Co3FeSb11.2Sn0.8 specimen.

Thermoelectric Properties of YbBiPt and YBiPt Thin Films

2008 ◽  
Vol 1100 ◽  
Author(s):  
Sadik Guner ◽  
Satilmis Budak ◽  
Claudiu I Muntele ◽  
Daryush Ila
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Rutherford Backscattering Spectrometry ◽  
Conductivity Measurement ◽  
Electronic Energy ◽  
Before And After

AbstractMonolayer thin films of YbBiPt and YBiPt have been produced with 560 nm and 394 nm thick respectively in house and their thermoelectric properties were measured before and after MeV ion bombardment. The energy of the ions were selected such that the bombarding Si ions stop in the silicon substrate and deposit only electronic energy by ionization in the deposited thin film. The bombardment by 5.0 MeV Si ions at various fluences changed the homogeneity as well as reducing the internal stress in the films thus affecting the thermal, electrical and Seebeck coefficient of thin films. The stoichiometry of the thin films was determined using Rutherford Backscattering Spectrometry, the thickness has been measured using interferometry and the electrical conductivity was measured using Van der Pauw method. Thermal conductivity of the thin films was measured using an in-house built 3ω thermal conductivity measurement system. Using the measured Seebeck coefficient, thermal conductivity and electrical conductivity we calculated the figure of merit (ZT). We will report our findings of change in the measured figure of merit as a function of bombardment fluence.

Thermoelectric Properties of Ag1-xPbmSbTe2+m Compounds

2007 ◽  
Vol 336-338 ◽  
pp. 854-856
Author(s):  
Yong Gao Yan ◽  
Xin Feng Tang ◽  
Hai Jun Liu ◽  
Ling Ling Yin ◽  
Qing Jie Zhang
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Spark Plasma Sintering ◽  
Thermoelectric Properties ◽  
M 10 ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Type Conduction

Ag1-xPbmSbTe2+m (m = 6, 10, 18; x = 0, 0.5, 0.75) compounds were prepared by melting-spark plasma sintering (SPS) process. The effects of m and x on the thermoelectric properties of the compounds were investigated. The results indicate that all samples are n-type conduction. For Ag1-xPb18SbTe20 (x = 0, 0.5, 0.75), the electrical conductivity decreases, whereas Seebeck coefficient increases, with increasing Ag concentration. For AgPbmSbTe2+m (m = 6, 10, 18), as m increases, the Seebeck coefficient slightly decreases and the electrical conductivity increases first, with a maximum at m =10, and then decreases. The thermal conductivity increases with increasing m.

Effect of Nanocavities on the Thermoelectric Properties of Polycrystalline Silicon

2011 ◽  
Vol 1329 ◽  
Author(s):  
Ekaterina Selezneva ◽  
Andrea Arcari ◽  
Gilles Pernot ◽  
Elisabetta Romano ◽  
Gianfranco Cerofolini ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Polycrystalline Silicon ◽  
Figure Of Merit ◽  
Annealing Temperature ◽  
Silicon Films ◽  
Negative Effect ◽  
Polycrystalline Silicon Films

ABSTRACTNanostructuring has opened new ways to increase the thermoelectric performance of a host of materials, mainly by decreasing their thermal conductivity κ while preserving the Seebeck coefficient S and electrical conductivity σ. The thermoelectric properties of degenerated polycrystalline silicon films with nanocavities (NCs) have been studied as a function of annealing temperature upon isochronous annealings in argon carried out every 50°C in the range 500 – 1000°C which were used to modify the shape of the NCs. We found that presence of the NCs had no negative effect on the electronic properties of the system. The measured values of S and σ were close to those previously reported for the blank polycrystalline silicon films with the same doping level. The thermal conductivity was also found to be close to the value measured on the blank sample, about half of the reported value in polycrystals. This led to a power factor of 15.2 mWm-1K-2 and a figure of merit of 0.18 at 300 K.

scholarly journals Влияние легирования ванадием на термоэлектрические свойства сплавов Гейслера Fe-=SUB=-2-=/SUB=-Ti-=SUB=-1-x-=/SUB=-V-=SUB=-x-=/SUB=-Sn

2019 ◽  
Vol 53 (6) ◽  
pp. 777
Author(s):  
А.И. Таранова ◽  
А.П. Новицкий ◽  
А.И. Воронин ◽  
С.В. Таскаев ◽  
В.В. Ховайло
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Experimental Study ◽  
Seebeck Coefficient ◽  
Transport Properties ◽  
Thermoelectric Properties ◽  
Pristine Sample ◽  
Electrical Conductivity Behavior ◽  
P Type ◽  
Conductivity Behavior

In this work the results of an experimental study of Fe2Ti1-xVxSn alloys (x = 0; 0.06; 0.15; 0.2) are presented. According to the temperature dependencies of the electrical conductivity, Seebeck coefficient and thermal conductivity, it is established, that the studied compositions exhibit transport properties typical for semiconductors. The substitution of V at the Ti site leads to a change of the p-type electrical conductivity behavior to n-type; the pristine sample of Fe2TiSn has the best thermoelectric properties.

Sign in / Sign up

Export Citation Format

Share Document